Title: EDGE-Expert Lerntipps, EDGE-Expert Online Pr¨¹fungen [Print This Page] Author: sidshaw897 Time: yesterday 17:19 Title: EDGE-Expert Lerntipps, EDGE-Expert Online Pr¨¹fungen P.S. Kostenlose 2026 EDGE EDGE-Expert Pr¨¹fungsfragen sind auf Google Drive freigegeben von ZertPruefung verf¨¹gbar: https://drive.google.com/open?id=1mwZn3iP4NMiL8xAnIRf5pwnXh5HOg2Ks
Die Schulungsunterlagen zur EDGE EDGE-Expert Zertifizierungspr¨¹fung von unserem ZertPruefung gelten f¨¹r alle IT-Zertifizierungspr¨¹fungen, ihre Anwendbarkeit kann jeden IT-Bereich erreichen. Die Schulungsunterlagen zur EDGE EDGE-Expert Zertifizierungspr¨¹fung aus ZertPruefung werden von den erfahrenen Experten durch ständige Praxis und Forschung bearbeitet, daher ist ihre Autorität zweifellos. Wir werden Ihnen eine volle R¨¹ckerstattung bedingungslos geben, entweder die gekauften Produkte Qualitätsproblem haben, oder Sie die EDGE EDGE-Expert Pr¨¹fung nicht bestehen.
Die hervoragende Qualität von EDGE EDGE-Expert garantiert den guten Ruf der ZertPruefung. Dank erlässliches Kundendienstes behalten wir viele Stammkunden. Viele davon haben EDGE EDGE-Expert Pr¨¹fungssoftware benutzt. Diese gut gekaufte Software is eine unserer ausgezeichneten Produkte. EDGE EDGE-Expert Pr¨¹fung ist heutezutage sehr populär, weil das Zertifikat eine bedeutende Rolle in Ihrem Berufsleben im IT-Bereich spielt. Jetzt können Sie auf unserer offiziellen Webseite die neuesten Informationen ¨¹ber EDGE EDGE-Expert erfahren!
EDGE-Expert Unterlagen mit echte Pr¨¹fungsfragen der EDGE ZertifizierungOb man in einem bestimmten Bereich den Erfolg macht, spiegelt an Ihren Zertifizierungen, sowie in IT-Industrie. Deshalb wollen viele Leute an EDGE EDGE-Expert Zertifizierungspr¨¹fungen teilnehmen, um Ihre selbe Fähigkeit zu beweisen. Und es ist nicht einfach, EDGE EDGE-Expert Zertifizierung zu bekommen. Aber wenn sie den k¨¹rzeren Weg finden, können Sie die EDGE-Expert Pr¨¹fung leicht bestehen. So wollen Wir Ihnen ZertPruefung Dumps empfehlen. Es kann Ihnen helfen, weniger Zeit zu verwenden und die EDGE-Expert Pr¨¹fung zu bestehen. EDGE Excellence in Design for Greater Efficiencies (EDGE Expert) Exam EDGE-Expert Pr¨¹fungsfragen mit Lösungen (Q73-Q78):73. Frage
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
A. Ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard.
B. As the project does not qualify for EDGE certification, the EDGE Auditor does not have to take any further action on the project.
C. Contact the design team directly to work with them to find a solution to improve the energy efficiency performance of the project.
D. Based on the Auditor's previous experience on working on similar projects, provide a list of measures that the Client could incorporate in the project that will take them comfortably over the EDGE standard.
Antwort: A
Begr¨¹ndung:
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
74. Frage
A medium-rise building comprises retail on the first two floors with offices on succeeding floors (third to fifth). If one of the tenants on the third floor aims for EDGE certification, which building type should be used?
A. Core and Shell
B. Office
C. Retail
D. Mixed-use
Antwort: B
Begr¨¹ndung:
The EDGE software requires users to select a building type (typology) to model resource consumption accurately, and the choice depends on the scope of the certification. In this scenario, a tenant on the third floor (an office floor) of a medium-rise building seeks EDGE certification. The EDGE User Guide provides guidance on selecting building types for tenant spaces: "When a tenant within a larger building seeks EDGE certification, the building type should reflect the tenant's space. For an office tenant on the third floor of a mixed-use building, the 'Office' typology should be selected, as the certification applies only to the tenant's space, not the entire building, unless the whole building is being certified" (EDGE User Guide, Section 2.2:
Project Setup). Option A, Office, aligns with this guidance, as the tenant's space is an office. Option B (Retail) is incorrect, as the retail floors are on the first two levels, not the third: "Retail typology would apply if the tenant space were on the retail floors, not the office floors" (EDGE User Guide, Section 2.2: Project Setup). Option C (Mixed-use) is also incorrect, as this typology applies to the entire building, not a single tenant space: "Mixed-use typology is used when the entire building, including all uses (e.g., retail and offices), is being certified, not for individual tenant spaces" (EDGE Methodology Report Version 2.0, Section
2.1: Calculation Approach). Option D (Core and Shell) is typically used for buildings certified up to the core and shell stage, not for tenant fit-outs: "Core and Shell typology applies to buildings certified without tenant fit-outs, focusing on the building envelope and systems, not individual tenant spaces like an office" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE User Guide further clarifies: "For tenant-led certifications, the typology should match the tenant's use-e.g., 'Office' for an office tenant-even if the building has multiple uses, ensuring the Base Case reflects the tenant's specific consumption patterns" (EDGE User Guide, Section 2.2: Project Setup). Since the tenant on the third floor operates an office, the Office typology (Option A) is the correct choice for EDGE certification.
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 2.1: Calculation Approach; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard.
75. Frage
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?
A. Design building elevations marking the window glass specifications
B. Bill of quantities with the specifications for the window glass highlighted
C. Window schedule for the building showing the major window glass types if more than one type of glass is present
D. Manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass
Antwort: D
Begr¨¹ndung:
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.
76. Frage
A building owner tells an EDGE Auditor that water-efficient faucets are in the building's restrooms.
However, the specifications on the faucets are not provided. The Auditor should:
A. Exclude the faucets in question from the project.
B. Require the building owner to replace the faucets as the audit needs the exact specification.
C. Test the faucets' flow rates to prove the water use and document the findings.
D. Find a product that has the same parameters as the building owner describes and upload this for evidence.
Antwort: A
Begr¨¹ndung:
EDGE Auditors must adhere to strict protocols ensuring that all claimed measures are supported by verifiable evidence, especially during audits. The EDGE Expert and Auditor Protocols state: "If a claimed measure, such as water-efficient faucets, lacks supporting documentation like specifications or manufacturer's data sheets, the Auditor must exclude the measure from the project assessment. The Auditor is not permitted to test equipment, substitute evidence, or mandate replacements, as their role is to verify, not rectify, the Client's submission" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option A, exclude the faucets from the project, aligns with this protocol, as the lack of specifications prevents verification. Option B (test the faucets' flow rates) is incorrect, as Auditors cannot conduct tests: "Auditors are not responsible for testing equipment; they must rely on provided documentation" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option C (require the owner to replace the faucets) oversteps the Auditor's role:
"Auditors cannot mandate changes to the project; they assess what is submitted" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option D (find a product with the same parameters) is also prohibited: "Auditors cannot substitute or assume evidence on behalf of the Client" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Thus, the Auditor should exclude the faucets (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements.
77. Frage
For a project in a hot and dry climate with no air-conditioning system, which of the following will NOT have an impact on the occupants' thermal comfort?
A. Ceiling fans
B. Solar photovoltaics
C. Wall and roof insulation
D. Solar shading
Antwort: B
Begr¨¹ndung:
In a hot and dry climate without air-conditioning, thermal comfort relies on passive design strategies that reduce heat gain or improve air movement. The EDGE User Guide discusses passive measures for thermal comfort: "In hot climates without air-conditioning, thermal comfort can be improved through ceiling fans, which enhance air movement, solar shading, which reduces solar heat gain, and wall and roof insulation, which minimizes heat transfer into the building" (EDGE User Guide, Section 3.5: Passive Design Strategies).
Option A (ceiling fans) improves air movement, directly impacting thermal comfort: "Ceiling fans increase air speed, enhancing evaporative cooling on occupants' skin" (EDGE Methodology Report Version 2.0, Section
5.5: Thermal Comfort Measures). Option B (solar shading) reduces heat gain, improving comfort: "External shading reduces solar radiation entering the building, lowering indoor temperatures" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (wall and roof insulation) also enhances comfort by reducing heat transfer: "Insulation lowers the U-value of the building envelope, maintaining cooler indoor temperatures" (EDGE User Guide, Section 4.1: Insulation Measures). Option D (solar photovoltaics) generates electricity but does not directly affect thermal comfort in a building without air-conditioning: "Solar photovoltaics contribute to energy supply but do not directly influence indoor thermal comfort unless used to power cooling systems, which are absent in this scenario" (EDGE Methodology Report Version 2.0, Section
5.3: Energy Measures). Thus, solar photovoltaics (Option D) will not impact thermal comfort in this context.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures; EDGE Methodology Report Version 2.0, Section 5.5: Thermal Comfort Measures, Section 5.3:
Energy Measures.
78. Frage
......
Dynamischen Welt von heute lohnt es sich, etwas f¨¹r das berufliche Weiterkommen zu tun. Angesichts des Fachkräftemangels in vielen Branchen haben Sie mit einer EDGE EDGE-Expert Zertifizierung mehr Kontrolle ¨¹ber Ihren eigenen Werdegang und damit bessere Aufstiegschancen. EDGE-Expert Online Pr¨¹fungen: https://www.zertpruefung.ch/EDGE-Expert_exam.html
EDGE EDGE-Expert Lerntipps Sie alle haben hohe Autorität im IT-Bereich, EDGE EDGE-Expert Lerntipps Es hängt von der Person ab, Wir hoffen aufrichtig, dass unsere Nutzer den EDGE-Expert Online Pr¨¹fungen - Excellence in Design for Greater Efficiencies (EDGE Expert) Exam Test bestehen und enormen Vorteil davon genießen, EDGE EDGE-Expert Lerntipps Auf unserer Website bieten wir mehrsprachige Online-Service, Sie sollen niemals sagen, dass Sie Ihr bestes getan haben, sogar wenn Sie die EDGE EDGE-Expert Zertifizierungspr¨¹fung nicht bestanden haben.
Und ne Menge Kinder mit roten Haaren, Rosalie fletschte die EDGE-Expert Ausbildungsressourcen Zähne und starrte mich an, als wollte sie mir an die Gurgel springen, Sie alle haben hohe Autorität im IT-Bereich.
Es hängt von der Person ab, Wir hoffen aufrichtig, dass unsere Nutzer EDGE-Expert den Excellence in Design for Greater Efficiencies (EDGE Expert) Exam Test bestehen und enormen Vorteil davon genießen, Auf unserer Website bieten wir mehrsprachige Online-Service. EDGE-Expert Dumps und Test Überpr¨¹fungen sind die beste Wahl f¨¹r Ihre EDGE EDGE-Expert TestvorbereitungSie sollen niemals sagen, dass Sie Ihr bestes getan haben, sogar wenn Sie die EDGE EDGE-Expert Zertifizierungspr¨¹fung nicht bestanden haben.