Firefly Open Source Community

Title: High pitched whine and no HDMI [Print This Page]
Author: e97    Time: 4/30/2015 10:27
Title: High pitched whine and no HDMI
Hi,

I recently tried to boot my Firefly-RK3288 and now it emits a high pitched whine and I get no display from HDMI.

I have erased flash and flashed "Firefly-RK3288_Android4.4_201504181055.img" via AndroidTool_v2.33 on Windows 7.

I connected UART and have attached the log:

  1. [   14.DDR Version 1.00 20141007
  2. In
  3. Channel a: DDR3 200MHz
  4. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  5. Channel b: DDR3 200MHz
  6. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  7. Memory OK
  8. Memory OK
  9. OUT


  12. U-Boot 2014.10-RK3288-02 (Jan 21 2015 - 17:07:53)

  14. CPU: rk3288
  15. CPU's clock information:
  16.     arm pll = 600000000HZ
  17.     periph pll = 300000000HZ
  18.     ddr pll = 200000000HZ
  19.     codec pll = 594000000HZ
  20. Board:  Rockchip platform Board
  21. DRAM:  Found dram banks:1
  22. Adding bank:0000000000000000(0000000080000000)
  23. 128 MiB
  24. storage init OK!
  25. Using default environment

  27. GetParam
  28. check parameter success
  29. Unknow param: MACHINE_MODEL:rk30sdk!
  30. Unknow param: MACHINE_ID:007!
  31. Unknow param: MANUFACTURER:RK30SDK!
  32. Unknow param: PWR_HLD: 0,0,A,0,1!
  33. power key: bank-0 pin-5
  34. light power led: bank-8 pin-1
  35. can't find dts node for ricoh619
  36. pmic:act8846
  37. Can't find dts node for fuel guage cw201x
  38. SecureBootEn = 0, SecureBootLock = 0

  40. #Boot ver: 2015-01-21#2.17
  41. empty serial no.
  42. checkKey
  43. vbus = 1
  44. no fuel gauge found
  45. no fuel gauge found
  46. read logo_on switch from dts [0]
  47. no fuel gauge found
  48. Hit any key to stop autoboot:  0
  49. kernel   @ 0x02000000 (0x005fc428)
  50. ramdisk  @ 0x04bf0000 (0x00121028)
  51. Secure Boot state: 0
  52. bootrk: do_bootm_linux...
  53.    Loading Device Tree to 0480c000, end 048271a4 ... OK
  54. Add bank:0000000000000000, 0000000080000000

  56. Starting kernel ...

  58. [    0.000000] Booting Linux on physical CPU 0x500
  59. [    0.000000] Initializing cgroup subsys cpu
  60. [    0.000000] Initializing cgroup subsys cpuacct
  61. [    0.000000] Linux version 3.10.0 (firefly@tchip-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #49 SMP PREEMPT Fri Apr 17 10:17:31 CST 2015
  62. [    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  63. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  64. [    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
  65. [    0.000000] hdmi init vic is -1
  66. [    0.000000] rockchip_ion_reserve
  67. [    0.000000] cma: CMA: reserved 16 MiB at 2e800000
  68. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  69. [    0.000000] PERCPU: Embedded 9 pages/cpu @c1ebc000 s14016 r8192 d14656 u36864
  70. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
  71. [    0.000000] Kernel command line: console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2015-01-21_17:07:53 hdmi.vic=-1
  72. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  73. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  74. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  75. [    0.000000] Memory: 2048MB = 2048MB total
  76. [    0.000000] Memory: 2047056k/2047056k available, 50096k reserved, 1318912K highmem
  77. [    0.000000] Virtual kernel memory layout:
  78. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  79. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  80. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  81. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  82. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  83. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  84. [    0.000000]       .text : 0xc0008000 - 0xc0a7ced4   (10708 kB)
  85. [    0.000000]       .init : 0xc0a7d000 - 0xc0ccc6c0   (2366 kB)
  86. [    0.000000]       .data : 0xc0cce000 - 0xc0d6afc8   ( 628 kB)
  87. [    0.000000]        .bss : 0xc0d6afc8 - 0xc0e84e84   (1128 kB)
  88. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  89. [    0.000000] Preemptible hierarchical RCU implementation.
  90. [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
  91. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  92. [    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
  93. [    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
  94. [    0.000000] rkclk_init_clks: cnt_parent = 7
  95. [    0.000000] rkclk_init_clks: cnt_rate = 32
  96. [    0.000000] Architected local timer running at 24.00MHz (phys).
  97. [    0.000000] Switching to timer-based delay loop
  98. [    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  99. [    0.000000] process version: 0
  100. [    0.000000] channel:0, lkg:0
  101. [    0.000000] target-temp:95
  102. [    0.000000] channel:2, lkg:0
  103. [    0.000000] target-temp:95
  104. [    0.000000] channel:0, lkg:0
  105. [    0.000000] target-temp:95
  106. [    0.000000] channel:1, lkg:0
  107. [    0.000000] target-temp:95
  108. [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  109. [    0.525825] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  110. [    0.525878] pid_max: default: 32768 minimum: 301
  111. [    0.526220] Security Framework initialized
  112. [    0.526263] SELinux:  Initializing.
  113. [    0.526497] Mount-cache hash table entries: 512
  114. [    0.528540] Initializing cgroup subsys debug
  115. [    0.528585] Initializing cgroup subsys freezer
  116. [    0.528678] CPU: Testing write buffer coherency: ok
  117. [    0.529441] /cpus/cpu@0 missing clock-frequency property
  118. [    0.529484] /cpus/cpu@1 missing clock-frequency property
  119. [    0.529519] /cpus/cpu@2 missing clock-frequency property
  120. [    0.529549] /cpus/cpu@3 missing clock-frequency property
  121. [    0.529670] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  122. [    0.529781] Setting up static identity map for 0xc078fcd8 - 0xc078fd30
  123. [    0.534423] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x14bc (version 3.0)
  124. [    0.613723] CPU1: Booted secondary processor
  125. [    0.613814] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  126. [    0.633453] CPU2: Booted secondary processor
  127. [    0.633536] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  128. [    0.653238] CPU3: Booted secondary processor
  129. [    0.653320] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  130. [    0.653694] Brought up 4 CPUs
  131. [    0.653792] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  132. [    0.653823] CPU: All CPU(s) started in SVC mode.
  133. [    0.656058] devtmpfs: initialized
  134. [    0.673789] pinctrl core: initialized pinctrl subsystem
  135. [    0.674522] regulator-dummy: no parameters
  136. [    0.676156] NET: Registered protocol family 16
  137. [    0.681385] DMA: preallocated 256 KiB pool for atomic coherent allocations
  138. [    0.682261] ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0e604d4 (version 0.1)
  139. [    0.682770] Registered FIQ tty driver
  140. [    0.683710] fiq-debugger is disabled in device tree
  141. [    0.685481] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
  142. [    0.685555] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
  143. [    0.685617] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
  144. [    0.685675] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
  145. [    0.685925] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
  146. [    0.686140] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
  147. [    0.686352] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
  148. [    0.686557] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
  149. [    0.686777] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
  150. [    0.686992] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
  151. [    0.687203] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
  152. [    0.687414] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
  153. [    0.687639] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
  154. [    0.687855] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
  155. [    0.687902] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
  156. [    0.687943] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
  157. [    0.687984] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
  158. [    0.689709] rockchip_interrupts_register:bank_num=7
  159. [    0.696509] of_get_gpio_init_config:gpio[0] = 256, value = 0
  160. [    0.696583] of_get_gpio_init_config:gpio[1] = 233, value = 0
  161. [    0.696655] of_get_gpio_init_config:gpio[2] = 136, value = 0
  162. [    0.696854] rockchip_pinctrl_probe:init ok
  163. [    0.717055] rk_iommu ff900800.iep_mmu: (iep) Enter
  164. [    0.717397] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  165. [    0.717441] rk_iommu ff900800.iep_mmu: (iep) Initialized
  166. [    0.717981] rk_iommu ff950800.vip_mmu: (vip) Enter
  167. [    0.718294] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  168. [    0.718336] rk_iommu ff950800.vip_mmu: (vip) Initialized
  169. [    0.718885] rk_iommu ff930300.vopb_mmu: (vopb) Enter
  170. [    0.719208] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  171. [    0.719250] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
  172. [    0.719790] rk_iommu ff940300.vopl_mmu: (vopl) Enter
  173. [    0.720098] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  174. [    0.720141] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
  175. [    0.720720] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
  176. [    0.721090] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  177. [    0.721133] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
  178. [    0.721734] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
  179. [    0.722049] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  180. [    0.722092] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
  181. [    0.722674] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
  182. [    0.723046] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  183. [    0.723088] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
  184. [    0.728640] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  185. [    0.728682] hw-breakpoint: maximum watchpoint size is 4 bytes.
  186. [    0.729276] DDR DEBUG: version 1.00 20140603
  187. [    0.729349] DDR DEBUG: Channel a:
  188. [    0.729379] DDR DEBUG: DDR3 Device
  189. [    0.729422] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  190. [    0.729451] DDR DEBUG: Channel b:
  191. [    0.729476] DDR DEBUG: DDR3 Device
  192. [    0.729516] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  193. [    0.729547] DDR DEBUG: addr=0xd70000
  194. [    0.729579] DDR DEBUG: stride=9, size=256, halfcap=40000000
  195. [    0.729610] DDR DEBUG: socAddr[0]=0xd70000, socAddr[1]=0xd70100
  196. [    0.729641] DDR DEBUG: chAddr[0]=0xd70000, chAddr[1]=0xd70000
  197. [    0.729675] DDR DEBUG: dtar[0]=0x1ae000, dtar[1]=0x1ae000
  198. [    0.729823] DDR DEBUG: init success!!! freq=200MHz
  199. [    0.729850] DDR DEBUG: Channel a:
  200. [    0.729892] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  201. [    0.729936] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  202. [    0.729978] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  203. [    0.730021] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  204. [    0.730058] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  205. [    0.730091] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  206. [    0.730120] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  207. [    0.730145] DDR DEBUG: Channel b:
  208. [    0.730185] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  209. [    0.730228] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  210. [    0.730270] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  211. [    0.730312] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
  212. [    0.730349] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  213. [    0.730380] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  214. [    0.730409] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  215. [    0.805757] bio: create slab <bio-0> at 0
  216. [    0.807538] Enter firefly_noatx8_init
  217. [    0.808023] firefly_noatx8_probe 51
  218. [    0.808779] SCSI subsystem initialized
  219. [    0.809257] usbcore: registered new interface driver usbfs
  220. [    0.809410] usbcore: registered new interface driver hub
  221. [    0.809682] usbcore: registered new device driver usb
  222. [    0.812729] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
  223. [    0.816958] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
  224. [    0.818399] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
  225. [    0.819811] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
  226. [    0.820702] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
  227. [    0.823446] media: Linux media interface: v0.10
  228. [    0.823589] Linux video capture interface: v2.00
  229. [    0.823747] pps_core: LinuxPPS API ver. 1 registered
  230. [    0.823782] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  231. [    0.823848] PTP clock support registered
  232. [    0.824264] rockchip_temp_probe,line=362
  233. [    0.824993] tsadc ff280000.tsadc: initialized
  234. [    0.826204] rockchip_ion_parse_dt: num_heaps = 1
  235. [    0.826255] 0:  0  3  vmalloc  0x  (null)
  236. [    0.826996] Rockchip ion module is successfully loaded (v1.0)
  237. [    0.827515] Advanced Linux Sound Architecture Driver Initialized.
  238. [    0.828678] Bluetooth: Core ver 2.16
  239. [    0.828800] NET: Registered protocol family 31
  240. [    0.828834] Bluetooth: HCI device and connection manager initialized
  241. [    0.828884] Bluetooth: HCI socket layer initialized
  242. [    0.828927] Bluetooth: L2CAP socket layer initialized
  243. [    0.829012] Bluetooth: SCO socket layer initialized
  244. [    0.829680] cfg80211: Calling CRDA to update world regulatory domain
  245. [    0.831943] act8846_i2c_probe,line=898
  246. [    0.833348] act8846_parse_dt,line=746
  247. [    0.834863] act8846_i2c_probe: act8846_pmic_hold=1
  248. [    0.834924] act8846_i2c_probe: act8846_pmic_sleep=1
  249. [    0.834972] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
  250. [    0.835021] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
  251. [    0.837510] act_dcdc1: 1200 mV
  252. [    0.841223] vccio: 3300 mV
  253. [    0.843852] vdd_logic: 700 <--> 1500 mV at 1100 mV
  254. [    0.847515] act_dcdc4: 2000 mV
  255. [    0.849406] vccio_sd: 1800 <--> 3300 mV at 3300 mV
  256. [    0.852354] act_ldo2: 1050 mV
  257. [    0.855227] act_ldo3: 2800 mV
  258. [    0.858108] act_ldo4: 3300 mV
  259. [    0.861003] act_ldo5: 3300 mV
  260. [    0.863889] act_ldo6: 1100 mV
  261. [    0.866801] vcc_18: 1800 mV
  262. [    0.869697] act_ldo8: 1850 mV
  263. [    0.876193] vdd_arm: 712 <--> 1500 mV at 1000 mV
  264. [    0.877675] The device is not syr82x fffffff5
  265. [    0.877740] syr82x: probe of 0-0041 failed with error -11
  266. [    0.878161] rk808_i2c_probe,line=1368
  267. [    0.879849] The device is not rk808 -11
  268. [    0.880112] rk808: probe of 0-001b failed with error -11
  269. [    0.884423] Switching to clocksource arch_sys_counter
  270. [    0.914891] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
  271. [    0.952090] rk-fb rockchip-fb: rk fb ion client create success!
  272. [    0.952146] rk-fb rockchip-fb: rockchip framebuffer driver probe
  273. [    0.953215] rk-screen rk_screen.8: rockchip screen probe success
  274. [    0.954056] rk32-lvds rk32-lvds: rk32 lvds driver probe success
  275. [    0.954730] rk32-edp ff970000.edp: screen is not edp!
  276. [    0.954793] rk32-edp: probe of ff970000.edp failed with error -22
  277. [    0.955918] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
  278. [    0.956663] graphics fb0: rockchip framebuffer registerd:fb0
  279. [    0.957725] graphics fb1: rockchip framebuffer registerd:fb1
  280. [    0.958344] graphics fb2: rockchip framebuffer registerd:fb2
  281. [    0.958887] graphics fb3: rockchip framebuffer registerd:fb3
  282. [    0.959406] graphics fb4: rockchip framebuffer registerd:fb4
  283. [    0.961064] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
  284. [    0.961488] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  285. [    0.961551] rk3288-lcdc lcdc0: wakeup from standby!
  286. [    1.066842] alloc_buffer:ion_phy_addr=0x10000000
  287. [    1.110193] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
  288. [    1.233611] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
  289. [    1.234744] rockchip_set_mux:warning ignore bank num 15
  290. [    1.235146] rockchip_set_mux:warning ignore bank num 15
  291. [    1.235549] rockchip_set_mux:warning ignore bank num 15
  292. [    1.235941] rockchip_set_mux:warning ignore bank num 15
  293. [    1.236299] rockchip_set_mux:warning ignore bank num 15
  294. [    1.236688] rockchip_set_mux:warning ignore bank num 15
  295. [    1.237598] rockchip_set_mux:warning ignore bank num 15
  296. [    1.238087] rockchip_set_mux:warning ignore bank num 15
  297. [    1.238933] rockchip_set_mux:warning ignore bank num 15
  298. [    1.239433] rockchip_set_mux:warning ignore bank num 15
  299. [    1.240261] rockchip_set_mux:warning ignore bank num 15
  300. [    1.240749] rockchip_set_mux:warning ignore bank num 15
  301. [    1.241568] rockchip_set_mux:warning ignore bank num 15
  302. [    1.242071] rockchip_set_mux:warning ignore bank num 15
  303. [    1.246445] NET: Registered protocol family 2
  304. [    1.247885] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  305. [    1.248361] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  306. [    1.248937] TCP: Hash tables configured (established 8192 bind 8192)
  307. [    1.249092] TCP: reno registered
  308. [    1.249142] UDP hash table entries: 512 (order: 2, 16384 bytes)
  309. [    1.249264] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  310. [    1.249921] NET: Registered protocol family 1
  311. [    1.250541] Unpacking initramfs...
  312. [    1.473063] Freeing initrd memory: 1156K (c4bf0000 - c4d11000)
  313. [    1.474855] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
  314. [    1.476370] probe device ff9a0000.vpu_service
  315. [    1.476791] vpu_service: power on
  316. [    1.477938] checking hw id 4831
  317. [    1.478958] vpu_service set to auto frequency mode
  318. [    1.479160] vcodec vpu_service: vcodec ion client create success!
  319. [    1.480255] vpu_service: power off...
  320. [    1.480340] done
  321. [    1.480366] init success
  322. [    1.480538] probe device ff9c0000.hevc_service
  323. [    1.481130] hevc_service: power on
  324. [    1.482246] checking hw id 6867
  325. [    1.483082] vcodec hevc_service: vcodec ion client create success!
  326. [    1.483951] hevc_service: power off...
  327. [    1.484038] done
  328. [    1.484064] init success
  329. [    1.484406] rknandbase v1.0 2014-03-31
  330. [    1.485112] rknand_probe clk rate = 148500000
  331. [    1.485490] rknand_driver:ret = 0
  332. [    1.486574] audit: initializing netlink socket (disabled)
  333. [    1.486679] type=2000 audit(0.970:1): initialized
  334. [    1.488944] bounce pool size: 64 pages
  335. [    1.504635] fuse init (API version 7.22)
  336. [    1.505901] msgmni has been set to 1456
  337. [    1.512073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  338. [    1.512120] io scheduler noop registered
  339. [    1.512153] io scheduler deadline registered
  340. [    1.512470] io scheduler cfq registered (default)
  341. [    1.514839] rga ff920000.rga: rga ion client create success!
  342. [    1.515230] rga: Driver loaded succesfully
  343. [    1.516661] IEP Power ON
  344. [    1.516771] iep ion client create success!
  345. [    1.517751] rk_iommu ff900800.iep_mmu: (iep) Enabled
  346. [    1.517831] IEP Power OFF
  347. [    1.517873] rk_iommu ff900800.iep_mmu: (iep) Disabled
  348. [    1.517916] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e235000
  349. [    1.517961] IEP Driver loaded succesfully
  350. [    1.518264] Module initialized.
  351. [    1.520702] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
  352. [    1.520760] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  353. [    1.525151] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
  354. [    1.525211] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  355. [    1.525954] pwm-voltage-regulator pwm_regulator.22: unable to request PWM, trying legacy API
  356. [    1.526003] pwm-voltage-regulator pwm_regulator.22: unable to request legacy PWM
  357. [    1.526033] pwm_regulator_probe:error
  358. [    1.526100] platform pwm_regulator.22: Driver pwm-voltage-regulator requests probe deferral
  359. [    1.527189] rk_serial.c v1.8 2014-03-04
  360. [    1.527886] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
  361. [    1.528513] serial ff180000.serial: membase f0172000
  362. [    1.528946] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
  363. [    1.528998] 2, baud is:115200
  364. [    3.211726] console [ttyS2] enabled
  365. [    3.215753] serial ff690000.serial: membase fed60000
  366. [    3.230512] loop: module loaded
  367. [    3.235417] SCSI Media Changer driver v0.25
  368. [    3.240666] tun: Universal TUN/TAP device driver, 1.6
  369. [    3.245664] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  370. [    3.253410] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  371. [    3.260177] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
  372. [    3.267177] stmmac_probe_config_dt: clock input or output? (input).
  373. [    3.273368] stmmac_probe_config_dt: TX delay(0x30).
  374. [    3.278223] stmmac_probe_config_dt: RX delay(0x20).
  375. [    3.283129] stmmac_probe_config_dt: is rockchip,rk3288-gmac
  376. [    3.288490] stmmc_pltfr_init:
  377. [    3.291700] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  378. [    3.297278] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
  379. [    3.303801] stmmc_pltfr_init: init for RGMII
  380. [    3.308061] tx delay=0x30
  381. [    3.308061] rx delay=0x20
  382. [    3.314634] stmmac - user ID: 0x10, Synopsys ID: 0x35
  383. [    3.319673]  Normal descriptors
  384. [    3.322785]  Ring mode enabled
  385. [    3.325869]  DMA HW capability register supported
  386. [    3.330351]  RX Checksum Offload Engine supported (type 2)
  387. [    3.335984]  TX Checksum insertion supported
  388. [    3.340204]  Wake-Up On Lan supported
  389. [    3.343912]  Enable RX Mitigation via HW Watchdog Timer
  390. [    3.350340] PPP generic driver version 2.4.2
  391. [    3.355117] PPP BSD Compression module registered
  392. [    3.359774] PPP Deflate Compression module registered
  393. [    3.364837] PPP MPPE Compression module registered
  394. [    3.369578] NET: Registered protocol family 24
  395. [    3.374030] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  396. [    3.383583] CSLIP: code copyright 1989 Regents of the University of California.
  397. [    3.390830] Rockchip WiFi SYS interface (V1.00) ...
  398. [    3.395968] usbcore: registered new interface driver catc
  399. [    3.401408] usbcore: registered new interface driver kaweth
  400. [    3.406961] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  401. [    3.414388] usbcore: registered new interface driver pegasus
  402. [    3.420065] usbcore: registered new interface driver rtl8150
  403. [    3.425787] usbcore: registered new interface driver r8152
  404. [    3.431207] hso: drivers/net/usb/hso.c: Option Wireless
  405. [    3.436584] usbcore: registered new interface driver hso
  406. [    3.441942] usbcore: registered new interface driver asix
  407. [    3.447426] usbcore: registered new interface driver ax88179_178a
  408. [    3.453577] usbcore: registered new interface driver cdc_ether
  409. [    3.459427] usbcore: registered new interface driver cdc_eem
  410. [    3.465147] usbcore: registered new interface driver dm9601
  411. [    3.470736] usbcore: registered new interface driver dm9620
  412. [    3.476403] usbcore: registered new interface driver smsc75xx
  413. [    3.482211] usbcore: registered new interface driver smsc95xx
  414. [    3.488029] usbcore: registered new interface driver gl620a
  415. [    3.493763] usbcore: registered new interface driver net1080
  416. [    3.499447] usbcore: registered new interface driver plusb
  417. [    3.505013] usbcore: registered new interface driver rndis_host
  418. [    3.510947] usbcore: registered new interface driver cdc_subset
  419. [    3.516925] usbcore: registered new interface driver zaurus
  420. [    3.522568] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  421. [    3.530016] usbcore: registered new interface driver int51x1
  422. [    3.535751] usbcore: registered new interface driver kalmia
  423. [    3.541393] usbcore: registered new interface driver ipheth
  424. [    3.547007] usbcore: registered new interface driver sierra_net
  425. [    3.552988] usbcore: registered new interface driver cx82310_eth
  426. [    3.559039] usbcore: registered new interface driver cdc_ncm
  427. [    3.564807] usbcore: registered new interface driver qmi_wwan
  428. [    3.570579] usbcore: registered new interface driver cdc_mbim
  429. [    3.576298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  430. [    3.585978] ehci_rk_probe f1a00000 f1a00010
  431. [    3.590137] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
  432. [    3.597712] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
  433. [    3.606976] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
  434. [    3.630007] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
  435. [    3.636724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  436. [    3.643488] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  437. [    3.650658] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
  438. [    3.656937] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  439. [    3.662307] usb usb1: SerialNumber: ff500000.usb
  440. [    3.668173] hub 1-0:1.0: USB hub found
  441. [    3.672001] hub 1-0:1.0: 1 port detected
  442. [    3.698872] ehci_rk_probe ok
  443. [    3.702125] usbcore: registered new interface driver cdc_acm
  444. [    3.707719] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  445. [    3.715803] usbcore: registered new interface driver usblp
  446. [    3.721375] usbcore: registered new interface driver cdc_wdm
  447. [    3.727132] usbcore: registered new interface driver usb-storage
  448. [    3.733218] usbcore: registered new interface driver ums-alauda
  449. [    3.739217] usbcore: registered new interface driver ums-cypress
  450. [    3.745240] usbcore: registered new interface driver ums-datafab
  451. [    3.751307] usbcore: registered new interface driver ums_eneub6250
  452. [    3.757498] usbcore: registered new interface driver ums-freecom
  453. [    3.763565] usbcore: registered new interface driver ums-isd200
  454. [    3.769680] usbcore: registered new interface driver ums-jumpshot
  455. [    3.775791] usbcore: registered new interface driver ums-karma
  456. [    3.781698] usbcore: registered new interface driver ums-onetouch
  457. [    3.787854] usbcore: registered new interface driver ums-sddr09
  458. [    3.793788] usbcore: registered new interface driver ums-sddr55
  459. [    3.799781] usbcore: registered new interface driver ums-usbat
  460. [    3.805788] usbcore: registered new interface driver usbserial
  461. [    3.811701] usbcore: registered new interface driver usbserial_generic
  462. [    3.818260] usbserial: USB Serial support registered for generic
  463. [    3.824289] usbcore: registered new interface driver option
  464. [    3.829910] usbserial: USB Serial support registered for GSM modem (1-port)
  465. [    3.837043] usbcore: registered new interface driver trancevibrator
  466. [    3.843234] usb20_otg: version 3.10a 21-DEC-2012
  467. [    3.848893] f1a80040
  468. [    3.851080] Core Release: 3.10a
  469. [    3.854195] Setting default values for core params
  470. [    3.859361] Using Buffer DMA mode
  471. [    3.862652] Periodic Transfer Interrupt Enhancement - disabled
  472. [    3.868456] Multiprocessor Interrupt Enhancement - disabled
  473. [    3.873961] OTG VER PARAM: 0, OTG VER FLAG: 0
  474. [    3.878301] ^^^^^^^^^^^^^^^^^Device Mode
  475. [    3.882194] Dedicated Tx FIFOs mode
  476. [    3.885669] pcd_init otg_dev = ed979040
  477. [    3.889944] usb20_otg ff580000.usb: DWC OTG Controller
  478. [    3.895076] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
  479. [    3.902568] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
  480. [    3.908423] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  481. [    3.915141] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  482. [    3.922313] usb usb2: Product: DWC OTG Controller
  483. [    3.927007] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  484. [    3.932603] usb usb2: SerialNumber: ff580000.usb
  485. [    3.938497] hub 2-0:1.0: USB hub found
  486. [    3.942260] hub 2-0:1.0: 1 port detected
  487. [    3.947091] usb20_host: version 3.10a 21-DEC-2012
  488. [    3.955124] f1b00040
  489. [    3.957310] Core Release: 3.10a
  490. [    3.960426] Setting default values for core params
  491. [    3.965580] Using Buffer DMA mode
  492. [    3.968873] Periodic Transfer Interrupt Enhancement - disabled
  493. [    3.974677] Multiprocessor Interrupt Enhancement - disabled
  494. [    3.980183] OTG VER PARAM: 0, OTG VER FLAG: 0
  495. [    3.984521] ^^^^^^^^^^^^^^^^^^Host Mode
  496. [    3.988361] usb20_host ff540000.usb: DWC OTG Controller
  497. [    3.993572] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
  498. [    4.001131] usb20_host ff540000.usb: irq 57, io mem 0x00000000
  499. [    4.007052] Init: Power Port (0)
  500. [    4.010417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  501. [    4.017181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  502. [    4.024352] usb usb3: Product: DWC OTG Controller
  503. [    4.029012] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  504. [    4.034640] usb usb3: SerialNumber: ff540000.usb
  505. [    4.040502] hub 3-0:1.0: USB hub found
  506. [    4.044431] hub 3-0:1.0: 1 port detected
  507. [    4.049931] .. rk pwm remotectl v1.0 init
  508. [    4.054170] remotectl probe j=0x0
  509. [    4.057947] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
  510. [    4.064968] pwm enable val=0x646205
  511. [    4.069317] usbcore: registered new interface driver xpad
  512. [    4.074837] usbcore: registered new interface driver usb_acecad
  513. [    4.080793] usbcore: registered new interface driver aiptek
  514. [    4.086457] usbcore: registered new interface driver gtco
  515. [    4.091899] usbcore: registered new interface driver hanwang
  516. [    4.097665] usbcore: registered new interface driver kbtab
  517. [    4.103265] usbcore: registered new interface driver wacom
  518. [    4.109695] sensor_register_slave:mma8452,id=17
  519. [    4.114236] sensor_register_slave:cm3217,id=44
  520. [    4.118633] sensor_register_slave:cm3218,id=45
  521. [    4.123058] tchip_rm_init is here!
  522. [    4.127907] input: tchip_remote_key as /devices/virtual/input/input1
  523. [    4.134566] tchiprm_register_device is here!
  524. [    4.139192] input: tchip_remote_touch as /devices/virtual/input/input2
  525. [    4.146169] tchip_remote_abs_register_device is here!
  526. [    4.151601] input: tchip_remote_gsensor as /devices/virtual/input/input3
  527. [    4.158553] tchip_remote_gsensor_register_device is here!
  528. [    4.171030] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
  529. [    4.177624] i2c /dev entries driver
  530. [    4.183432] IR NEC protocol handler initialized
  531. [    4.187920] IR RC5(x) protocol handler initialized
  532. [    4.192700] IR RC6 protocol handler initialized
  533. [    4.197180] IR JVC protocol handler initialized
  534. [    4.201693] IR Sony protocol handler initialized
  535. [    4.206257] IR RC5 (streamzap) protocol handler initialized
  536. [    4.211786] IR SANYO protocol handler initialized
  537. [    4.216436] IR MCE Keyboard/mouse protocol handler initialized
  538. [    4.222446] usbcore: registered new interface driver uvcvideo
  539. [    4.228122] USB Video Class driver (1.1.1)
  540. [    4.232221] CamSys driver version: v0.19.0,  CamSys head file version: v0.8.0
  541. [    4.242516] D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
  542. [    4.248999] D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
  543. [    4.255692] D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
  544. [    4.262705] D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
  545. [    4.269165] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
  546. [    4.280347] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf19b0000  size: 0x4000)
  547. [    4.294636] D1:camsys_platform_probe(1208): ff910000.isp memory:
  548. [    4.300635] D1:camsys_platform_probe(1218):     Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
  549. [    4.310622] D1:camsys_platform_probe(1213):     I2c memory (phy: 0x2d9e4000 vir: 0xed9e4000 size: 0x1000)
  550. [    4.320085] D1:camsys_platform_probe(1233): Probe ff910000.isp device success
  551. [    4.330186] device-mapper: uevent: version 1.0.3
  552. [    4.335475] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  553. [    4.344789] Bluetooth: HCI UART driver ver 2.2
  554. [    4.349276] Bluetooth: HCI H4 protocol initialized
  555. [    4.354016] Bluetooth: HCILL protocol initialized
  556. [    4.359688] DVFS ERR:        clk_enable_dvfs: vd(vd_gpu) can't get regulator(vdd_gpu)!
  557. [    4.369681] cpufreq version 1.0, suspend freq 1200 MHz
  558. [    4.375331] cpuidle: using governor ladder
  559. [    4.379451] cpuidle: using governor menu
  560. [    4.383422] Synopsys Designware Multimedia Card Interface Driver
  561. [    4.390284] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
  562. [    4.397264] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
  563. [    4.404332] 3291..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
  564. [    4.410787] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
  565. [    4.416707] 1381..dw_mci_set_ios:  no card. [mmc0]
  566. [    4.436818] 1381..dw_mci_set_ios:  no card. [mmc0]
  567. [    4.456554] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
  568. [    4.456569] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
  569. [    4.456583] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
  570. [    4.456913] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
  571. [    4.487414] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
  572. [    4.494483] 3285..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
  573. [    4.500838] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
  574. [    4.507173] 1381..dw_mci_set_ios:  no card. [mmc1]
  575. [    4.522751] mmc0: BKOPS_EN bit is not set
  576. [    4.526760] 1381..dw_mci_set_ios:  no card. [mmc1]
  577. [    4.528689] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
  578. [    4.531018] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
  579. [    4.531041] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
  580. [    4.546108] rk_sdmmc: BOOT
  581. [    4.546108]  execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0       SDMMC_SHIFT_DEGREE_90    SDMMC_SHIFT_DEGREE_180  SDMMC_SHIFT_DEGREE_INVALID[mmc0]
  582. [    4.546225] mmc0: new HS200 MMC card at address 0001
  583. [    4.546691] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
  584. [    4.547165] mtd: partition size too small (7)
  585. [    4.547182]      uboot: 0x000400000 -- 0x000800000 (4 MB)
  586. [    4.547193]       misc: 0x000800000 -- 0x000c00000 (4 MB)
  587. [    4.547203]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
  588. [    4.547213]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
  589. [    4.547223]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
  590. [    4.547232]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
  591. [    4.547241]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
  592. [    4.547250]      cache: 0x00a000000 -- 0x012000000 (128 MB)
  593. [    4.547260]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
  594. [    4.547269]     system: 0x012400000 -- 0x042400000 (768 MB)
  595. [    4.547279]   metadata: 0x042400000 -- 0x042800000 (4 MB)
  596. [    4.547288]   userdata: 0x042800000 -- 0x082800000 (1024 MB)
  597. [    4.547297] radical_update: 0x082800000 -- 0x086800000 (64 MB)
  598. [    4.547307]       user: 0x086800000 -- 0x3a3a00000 (12754 MB)
  599. [    4.673016]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141381..dw_mci_set_ios:  no card. [mmc1]
  600. [    4.673149] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
  601. [    4.673159] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
  602. [    4.673538] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
  603. [    4.704294] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
  604. [    4.711259] 3291..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
  605. [    4.717599] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
  606. [    4.723423] 1381..dw_mci_set_ios:  no card. [mmc2]
  607. [    4.741835] 1381..dw_mci_set_ios:  no card. [mmc2]
  608. [    4.761536] 1381..dw_mci_set_ios:  no card. [mmc2]
  609. [    4.761703] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
  610. [    4.761710] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
  611. [    4.761957] leds-gpio leds.30: pins are not configured from the driver
  612. [    4.762156] hidraw: raw HID events driver (C) Jiri Kosina
  613. [    4.763445] usbcore: registered new interface driver usbhid
  614. [    4.763449] usbhid: USB HID core driver
  615. [    4.763757] ashmem: initialized
  616. [    4.763874] logger: created 256K log 'log_main'
  617. [    4.763964] logger: created 256K log 'log_events'
  618. [    4.764055] logger: created 256K log 'log_radio'
  619. [    4.764151] logger: created 256K log 'log_system'
  620. [    4.765110] input: rk29-keypad as /devices/ff100000.adc/key.33/input/input4
  621. [    4.765686] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ; cannot claim for 2-0010
  622. [    4.765696] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
  623. [    4.765703] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
  624. [    4.765710] ES8323 2-0010: Error applying setting, reverse things back
  625. [    4.765989] es8323 probe i2c recv ok
  626. [    4.766204] i2c-core: driver [ES8323] using legacy suspend method
  627. [    4.766209] i2c-core: driver [ES8323] using legacy resume method
  628. [    4.766510] rockchip-hdmi-spdif rockchip-hdmi-spdif.26: ASoC: CPU DAI (null) not registered
  629. [    4.766533] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  630. [    4.766547] platform rockchip-hdmi-spdif.26: Driver rockchip-hdmi-spdif requests probe deferral
  631. [    4.766783] es8323_probe
  632. [    4.766867] es8323_probe:register ISR (irq=194)
  633. [    5.402433] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
  634. [    5.410231] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
  635. [    5.418126] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
  636. [    5.426046] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
  637. [    5.433926] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
  638. [    5.442285] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
  639. [    5.450833] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
  640. [    5.458717] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
  641. [    5.466766] iep dpi mode inactivity
  642. [    5.470438] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
  643. [    5.478353] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
  644. [    5.486358] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
  645. [    5.494931] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
  646. [    5.503482] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
  647. [    5.511284] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
  648. [    5.519007] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
  649. [    5.526856] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
  650. [    5.534646] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
  651. [    5.543254] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
  652. [    5.552039] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
  653. [    5.559953] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
  654. [    5.567800] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
  655. [    5.575638] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
  656. [    5.583551] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
  657. [    5.592173] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
  658. [    5.600886] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
  659. [    5.608996] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
  660. [    5.617092] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
  661. [    5.625257] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
  662. [    5.633415] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
  663. [    5.641550] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
  664. [    5.649894] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
  665. [    5.658137] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
  666. [    5.666169] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
  667. [    5.673886] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
  668. [    5.681623] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
  669. [    5.689343] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
  670. [    5.697087] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
  671. [    5.705221] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
  672. [    5.713379] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
  673. [    5.721200] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
  674. [    5.729017] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
  675. [    5.736831] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
  676. [    5.744636] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
  677. [    5.752973] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
  678. [    5.761543] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
  679. [    5.767473] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
  680. [    5.773304] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
  681. [    5.779152] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
  682. [    5.784926] ES8323 2-0010: ASoC: mux Differential Mux has no paths
  683. [    5.794064] Enter::rk29_es8323_init----135
  684. [    5.802503] rockchip-es8323 rockchip-es8323.28:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
  685. [    5.811341] u32 classifier
  686. [    5.814004]     Actions configured
  687. [    5.817373] Netfilter messages via NETLINK v0.30.
  688. [    5.822052] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  689. [    5.828429] ctnetlink v0.93: registering with nfnetlink.
  690. [    5.833710] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  691. [    5.840575] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  692. [    5.846612] xt_time: kernel timezone is -0000
  693. [    5.851118] ip_tables: (C) 2000-2006 Netfilter Core Team
  694. [    5.856544] arp_tables: (C) 2002 David S. Miller
  695. [    5.861120] TCP: cubic registered
  696. [    5.864393] Initializing XFRM netlink socket
  697. [    5.868847] NET: Registered protocol family 10
  698. [    5.873855] mip6: Mobile IPv6
  699. [    5.876797] ip6_tables: (C) 2000-2006 Netfilter Core Team
  700. [    5.882233] sit: IPv6 over IPv4 tunneling driver
  701. [    5.887166] NET: Registered protocol family 17
  702. [    5.891556] NET: Registered protocol family 15
  703. [    5.896021] Bridge firewalling registered
  704. [    5.899978] Ebtables v2.0 registered
  705. [    5.903672] Bluetooth: RFCOMM TTY layer initialized
  706. [    5.908498] Bluetooth: RFCOMM socket layer initialized
  707. [    5.913583] Bluetooth: RFCOMM ver 1.11
  708. [    5.917273] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  709. [    5.922498] Bluetooth: BNEP filters: protocol multicast
  710. [    5.927650] Bluetooth: BNEP socket layer initialized
  711. [    5.932553] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  712. [    5.938384] Bluetooth: HIDP socket layer initialized
  713. [    5.943301] l2tp_core: L2TP core driver, V2.0
  714. [    5.947595] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  715. [    5.952350] [WLAN_RFKILL]: Enter rfkill_wlan_init
  716. [    5.957228] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  717. [    5.961950] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
  718. [    5.967531] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  719. [    5.974567] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
  720. [    5.982952] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  721. [    5.990243] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
  722. [    5.999252] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
  723. [    6.008319] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  724. [    6.013493] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
  725. [    6.021813] dwc_otg_hcd_enable, enable host controller
  726. [    6.030937] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  727. [    6.035615] [BT_RFKILL]: Enter rfkill_rk_init
  728. [    6.040049] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
  729. [    6.048111] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
  730. [    6.056084] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
  731. [    6.064049] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
  732. [    6.071933] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
  733. [    6.080189] [BT_RFKILL]: Request irq for bt wakeup host
  734. [    6.085425] [BT_RFKILL]: ** disable irq
  735. [    6.089280] [BT_RFKILL]: ap6335 device registered.
  736. [    6.130219] Using Buffer DMA mode
  737. [    6.133478] Periodic Transfer Interrupt Enhancement - disabled
  738. [    6.139213] Multiprocessor Interrupt Enhancement - disabled
  739. [    6.144687] OTG VER PARAM: 0, OTG VER FLAG: 0
  740. [    6.148975] ^^^^^^^^^^^^^^^^^^Host Mode
  741. [    6.198372] Init: Power Port (0)
  742. [    6.385397] Indeed it is in host mode hprt0 = 00021501
  743. [    6.562465] usb 3-1: new high-speed USB device number 2 using usb20_host
  744. [    6.569529] Indeed it is in host mode hprt0 = 00001101
  745. [    6.719729] ******** Show Sink Info ********
  746. [    6.723946] Max tmds clk is 0
  747. [    6.726909] Support video mode:
  748. [    6.730133]  1920x1080p@60Hz
  749. [    6.733011]  1920x1080p@50Hz
  750. [    6.735884]  1280x720p@60Hz
  751. [    6.738670]  1280x720p@50Hz
  752. [    6.741576]  720x576p@50Hz
  753. [    6.744275]  720x480p@60Hz
  754. [    6.746938] Support video color mode:
  755. [    6.750553]  RGB
  756. [    6.752364]  YCbCr422
  757. [    6.754600]  YCbCr444
  758. [    6.756836] Support video color depth:
  759. [    6.760545]  24bit
  760. [    6.762527] Support audio type:
  761. [    6.765617]  LPCM
  762. [    6.767513] Support max audio channel is 2
  763. [    6.769296] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
  764. [    6.769311] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  765. [    6.769323] usb 3-1: Product: USB 2.0 Hub [MTT]
  766. [    6.769944] hub 3-1:1.0: USB hub found
  767. [    6.770017] hub 3-1:1.0: 4 ports detected
  768. [    6.797224] Support audio sample rate:
  769. [    6.800922]  32000
  770. [    6.802901]  44100
  771. [    6.804879]  48000
  772. [    6.806858] Support audio word lenght:
  773. [    6.810557]  16bit
  774. [    6.812536]  20bit
  775. [    6.814514]  24bit
  776. [    6.816492]
  777. [    6.817958] ******** Show Sink Info ********
  778. [    6.822179]
  779. [    6.822179] rk_fb_switch_screen lcdc_id 0 type 6 enable 1
  780. [    6.828966] fb0 win id 1 state 1
  781. [    6.832155] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  782. [    6.837823] fb1 win id 0 state 0
  783. [    6.840996] fb2 win id 2 state 0
  784. [    6.844168] fb3 win id 3 state 0
  785. [    6.847339] fb4 win id 4 state 0
  786. [    6.850522]
  787. [    6.850522] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
  788. [    6.850522]
  789. [    6.859170] pixel clk is 148500000 tmds clk is 148500000
  790. [    6.864426] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
  791. [    6.881082] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
  792. [    6.887419] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  793. [    6.895176] rk3288_init_suspend
  794. [    6.898305] rk3288_suspend_init enter
  795. [    6.902097] rk3288_suspend_init: pm_ctrbits =40017
  796. [    6.906879] gpio_get_dts_info suspend:8
  797. [    6.910664] gpio_get_dts_info resume:8
  798. [    6.914347] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  799. [    6.922920] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  800. [    6.931509] clks_gating_suspend_init:clkgt info ok
  801. [    6.936343] Registering SWP/SWPB emulation handler
  802. [    6.941516] ddrfreq: verion 1.2 20140526
  803. [    6.945543] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
  804. [    6.956240] ddrfreq: auto-freq=0
  805. [    6.959414] ddrfreq: auto-freq-table[0] 240MHz
  806. [    6.963780] ddrfreq: auto-freq-table[1] 324MHz
  807. [    6.968157] ddrfreq: auto-freq-table[2] 456MHz
  808. [    6.972523] ddrfreq: auto-freq-table[3] 528MHz
  809. [    6.977487] act_ldo3: operation not allowed
  810. [    6.981844] vga_edid_probe: turn on ldo3 done.
  811. [    6.986267] act_ldo4: operation not allowed
  812. [    6.990634] vga_edid_probe: turn on ldo done.
  813. [    6.994963] act_ldo2: operation not allowed
  814. [    6.999372] vga_edid_probe: turn on ldo2 done.
  815. [    7.003769] act_ldo8: operation not allowed
  816. [    7.008141] vga_edid_probe: turn on ldo done.
  817. [    7.017519] unable to read EDID block.
  818. [    7.055782] unable to read EDID block.
  819. [    7.094050] unable to read EDID block.
  820. [    7.097740] vga-ddc: read and parse edid failed errno:-5.
  821. [    7.103044] vga_edid_probe: success. 10
  822. [    7.107052] firefly_vga_get_enable 180, 0
  823. [    7.110993] firefly_vga_get_status 186
  824. [    7.114695] firefly_vga_set_enable 159 enable:0
  825. [    7.119204] regulator-dummy: disabling
  826. [    7.123259] rockchip-hdmi-spdif rockchip-hdmi-spdif.26: ASoC: CPU DAI (null) not registered
  827. [    7.131502] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  828. [    7.138045] platform rockchip-hdmi-spdif.26: Driver rockchip-hdmi-spdif requests probe deferral
  829. [    7.146755] pcd_pullup, is_on 0
  830. [    7.149890] file system registered
  831. [    7.154074] android_usb gadget: Mass Storage Function, version: 2009/09/11
  832. [    7.160832] android_usb gadget: Number of LUNs=2
  833. [    7.165392]  lun0: LUN: removable file: (no medium)
  834. [    7.170187]  lun1: LUN: removable file: (no medium)
  835. [    7.175167] android_usb gadget: android_usb ready
  836. [    7.179889] sensor_init: Probe name sensors
  837. [    7.184035] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
  838. [    7.192781] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:28:38 UTC (1293884918)
  839. [    7.209228] usbcore: registered new interface driver snd-usb-audio
  840. [    7.215382] ALSA device list:
  841. [    7.218327]   #0: RK_ES8323
  842. [    7.219764] rockchip-hdmi-spdif rockchip-hdmi-spdif.26:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
  843. [    7.230529]   #1: RK-HDMI-SPDIF
  844. [    7.233769] 2, baud is:115200
  845. [    7.238186] Freeing unused kernel memory: 2364K (c0a7d000 - c0ccc000)
  846. [    7.251913] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
  847. [    7.259890] SELinux: the above unknown classes and permissions will be denied
  848. [    7.506904]
  849. [    7.506904] rk_fb_switch_screen lcdc_id 0 type 6 enable 0
  850. [    7.540185] type=1403 audit(1293884918.840:2): policy loaded auid=4294967295 ses=4294967295
  851. [    7.548541] SELinux: Loaded policy from /sepolicy
  852. [    7.554963] type=1404 audit(1293884918.850:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  853. [    8.461825] init: init.rk30board.bootmode.emmc.rc: 8: invalid command '/devices/ff0f0000.rksdmmc/mmc_host/mmc'
  854. [    8.472250] init: init.rk30board.bootmode.emmc.rc: 9: invalid command '/devices/ff0c0000.rksdmmc/mmc_host/mmc'
  855. [    8.482102] init: init.rk30board.bootmode.emmc.rc: 10: invalid command '/devices/ff580000.usb'
  856. [    8.490565] init: init.rk30board.bootmode.emmc.rc: 11: invalid command '/devices/ff580000.usb'
  857. [    8.499038] init: init.rk30board.bootmode.emmc.rc: 12: invalid command '/devices/ff500000.usb'
  858. [    8.507507] init: init.rk30board.bootmode.emmc.rc: 13: invalid command '/devices/ff500000.usb'
  859. [    8.515986] init: init.rk30board.bootmode.emmc.rc: 14: invalid command '/devices/ff540000.usb'
  860. [    8.524461] init: init.rk30board.bootmode.emmc.rc: 15: invalid command '/devices/ff540000.usb'
  861. [    8.533683] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  862. [    8.612417] init: /dev/hw_random not found
  863. [    8.616504] keychord: using input dev ff680000.pwm for fevent
  864. [    8.622176] keychord: using input dev tchip_remote_key for fevent
  865. [    8.628161] keychord: using input dev rk29-keypad for fevent
  866. [    8.633822] 2, baud is:115200
  867. [    8.642950] fs_mgr: parse_link_device : path = NULL
  868. [    8.647768] fs_mgr: parse_link_device : path = NULL
  869. [    8.648341] ******** Show Sink Info ********
  870. [    8.648346] Max tmds clk is 0
  871. [    8.648350] Support video mode:
  872. [    8.648353]  1920x1080p@60Hz
  873. [    8.648356]  1920x1080p@50Hz
  874. [    8.648359]  1280x720p@60Hz
  875. [    8.648362]  1280x720p@50Hz
  876. [    8.648364]  720x576p@50Hz
  877. [    8.648366]  720x480p@60Hz
  878. [    8.648369] Support video color mode:
  879. [    8.648372]  RGB
  880. [    8.648374]  YCbCr422
  881. [    8.648377]  YCbCr444
  882. [    8.648379] Support video color depth:
  883. [    8.648381]  24bit
  884. [    8.648385] Support audio type:
  885. [    8.648387]  LPCM
  886. [    8.648390] Support max audio channel is 2
  887. [    8.648393] Support audio sample rate:
  888. [    8.648395]  32000
  889. [    8.648397]  44100
  890. [    8.648399]  48000
  891. [    8.648402] Support audio word lenght:
  892. [    8.648405]  16bit
  893. [    8.648407]  20bit
  894. [    8.648409]  24bit
  895. [    8.648411]
  896. [    8.648414] ******** Show Sink Info ********
  897. [    8.648449]
  898. [    8.648449] rk_fb_switch_screen lcdc_id 0 type 6 enable 1
  899. [    8.648458] fb0 win id 1 state 1
  900. [    8.648475] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  901. [    8.648490] fb1 win id 0 state 0
  902. [    8.648494] fb2 win id 2 state 0
  903. [    8.648498] fb3 win id 3 state 0
  904. [    8.648501] fb4 win id 4 state 0
  905. [    8.648505]
  906. [    8.648505] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
  907. [    8.648505]
  908. [    8.648518] pixel clk is 148500000 tmds clk is 148500000
  909. [    8.648558] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
  910. [    8.778142] fs_mgr: parse_link_device : path = NULL
  911. [    8.782996] fs_mgr: parse_link_device : path = NULL
  912. [    8.787852] fs_mgr: parse_link_device : path = NULL
  913. [    8.792684] fs_mgr: parse_link_device : path = NULL
  914. [    8.797537] fs_mgr: parse_link_device : path = NULL
  915. [    8.802653] fs_mgr: parse_link_device : path = NULL
  916. [    8.807730] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
  917. [    8.826409] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long.  Nothing to do!resize2fs:
  918. [    8.843188] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  919. [    8.866268] EXT4-fs (mmcblk0p8): recovery complete
  920. [    8.871521] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  921. [    8.882260] EXT4-fs (mmcblk0p11): warning: mounting unchecked fs, running e2fsck is recommended
  922. [    8.891422] EXT4-fs (mmcblk0p11): mounted filesystem without journal. Opts: noauto_da_alloc,discard
  923. [    8.934082] EXT4-fs (mmcblk0p12): recovery complete
  924. [    8.939420] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  925. [    8.957106] drmboot: module license 'unspecified' taints kernel.
  926. [    8.963012] Disabling lock debugging due to kernel taint
  927. [    8.969092] %s: ok, 20130810
  928. [    8.977533] mali pd enabled
  929. [    8.980287] clk enabled
  930. [    8.982692] MALI_DVFS_STEP=4,div_dvfs=10
  931. [    8.986582] mali_dvfs_infotbl[0].clock=200000,min_threshold=0,max_threshold=70
  932. [    8.993689] mali_dvfs_infotbl[1].clock=300000,min_threshold=70,max_threshold=80
  933. [    9.000870] mali_dvfs_infotbl[2].clock=420000,min_threshold=81,max_threshold=90
  934. [    9.008065] mali_dvfs_infotbl[3].clock=500000,min_threshold=93,max_threshold=100
  935. [    9.015449] turn on mali power
  936. [    9.018466] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
  937. [    9.025268] mali ffa30000.gpu: Probed as mali0
  938. [    9.030836] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  939. [    9.050213] init: /dev/hw_random not found
  940. [    9.061054] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  941. [    9.061138] binder: 132:132 transaction failed 29189, size 0-0
  942. [    9.077159] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
  943. [    9.085747] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  944. [    9.095072] init: cannot find '/system/bin/bindvbplayservice', disabling 'dvbdataserv'
  945. [    9.103269] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
  946. [    9.110294] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
  947. [    9.118929] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  948. [    9.126833] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  949. [    9.136607] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  950. [    9.147932] 0,baud is:9600
  951. [    9.150923] 2, baud is:115200
  952. [    9.153989] 2, baud is:115200
  953. [    9.155867] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  954. [    9.163769] 0,baud is:9600
  955. [    9.163963] firefly_vga_get_enable 180, 0
  956. [    9.164008] firefly_vga_get_status 186
  957. [    9.174510] firefly_vga_set_enable 159 enable:0
  958. [    9.221208] fs_mgr: parse_link_device : path = NULL
  959. [    9.226044] fs_mgr: parse_link_device : path = NULL
  960. [    9.230943] fs_mgr: parse_link_device : path = NULL
  961. [    9.235771] fs_mgr: parse_link_device : path = NULL
  962. [    9.240637] fs_mgr: parse_link_device : path = NULL
  963. [    9.245453] fs_mgr: parse_link_device : path = NULL
  964. [    9.250340] fs_mgr: parse_link_device : path = NULL
  965. [    9.255167] fs_mgr: parse_link_device : path = NULL
  966. [    9.262320] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  967. [    9.270656] init: powerctl: cannot expand '${sys.powerctl}'
  968. [    9.276257] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  969. [    9.287300] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  970. [    9.298549] android_usb: already disabled
  971. [    9.303403] 2, baud is:115200
  972. [    9.305179] read descriptors
  973. [    9.305188] read strings
  974. [    9.305220] pcd_pullup, is_on 1
  975. [    9.343252] wifi_driver_write: wifi driver already rmmod
  976. shell@rk3288:/ $ [   10.070231] rk3288-lcdc lcdc0: blank mode:0
  977. [   10.185875] init: sys_prop: permission denied uid:1000  name:sys_graphic.cam_hal.ver
  978. [   10.193740] init: sys_prop: permission denied uid:1000  name:sys_graphic.cam_trace
  979. [   10.201296] init: sys_prop: permission denied uid:1003  name:sys.gmali.version
  980. [   10.208525] init: sys_prop: permission denied uid:1000  name:sys_graphic.cam_camboard.ver
  981. [   10.216874] init: sys_prop: permission denied uid:1000  name:sys_graphic.cam_libisp.ver
  982. [   10.225151] init: sys_prop: permission denied uid:1000  name:sys_graphic.cam_isi.ver
  983. [   10.238711] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  984. [   10.246119] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  985. [   10.253494] D1:camsys_open(710): camsys_marvin(ed87bd10) is opened!
  986. [   10.259715] D1:camsys_extdev_register(226): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
  987. [   10.269678] D1:camsys_extdev_register(226): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
  988. [   10.279617] D1:camsys_extdev_register(226): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
  989. [   10.289579] rockchip_gpio_request:GPIO7-13
  990. [   10.293628] rockchip_gpio_set:GPIO7-13 level = 1
  991. [   10.298170] rockchip_gpio_direction_output:set GPIO7-13 level 1
  992. [   10.304019] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
  993. [   10.310712] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x207600,result=0x207600
  994. [   10.321603] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
  995. [   10.328381] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000400,result=0x400
  996. [   10.335246] _rockchip_pinconf_set:GPIO7-13,group=isp_flash_trigger, function=isp_pin, type=3
  997. [   10.343563] rk3288_calc_drv_reg_and_bit:GPIO7-13, drv_reg=0x74, bit=10
  998. [   10.349982] _rockchip_pinconf_set:GPIO-7 13 data=0xc000000,type=3
  999. [   10.356018] D1:camsys_extdev_register(248): Extdev(dev_id: 0x2000000) register success
  1000. [   10.368882] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
  1001. [   10.376854] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
  1002. [   10.381853] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
  1003. [   10.386760] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
  1004. [   10.396048] D1:camsys_sysctl_extdev(326): Sysctl 11 success, gpio(11) set 1
  1005. [   10.403970] D1:camsys_sysctl_extdev(330): Sysctl 8 success, gpio(79) set 1
  1006. [   10.411796] D1:camsys_sysctl_extdev(330): Sysctl 7 success, gpio(78) set 1
  1007. [   10.421791] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
  1008. [   10.429259] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
  1009. [   10.435587] D1:camsys_sysctl_extdev(326): Sysctl 7 success, gpio(78) set 0
  1010. [   10.442414] D1:camsys_sysctl_extdev(326): Sysctl 8 success, gpio(79) set 0
  1011. [   10.449207] D1:camsys_sysctl_extdev(330): Sysctl 11 success, gpio(11) set 0
  1012. [   10.457143] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
  1013. [   10.463782] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
  1014. [   10.472638] D1:camsys_extdev_deregister(308): Extdev(dev_id: 0x2000000) is deregister success
  1015. [   10.481061] D1:camsys_irq_disconnect(635): All thread disconnect camsys_marvin irq success!
  1016. [   10.489327] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  1017. [   10.496776] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  1018. [   10.504305] D1:camsys_release(734): camsys_marvin(ed87bd10) is closed
  1019. [   10.514747] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  1020. [   10.522136] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  1021. [   10.529531] D1:camsys_open(710): camsys_marvin(ed87bd10) is opened!
  1022. [   10.535741] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
  1023. [   10.542713] D1:camsys_extdev_register(248): Extdev(dev_id: 0x1000000) register success
  1024. [   10.555568] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
  1025. [   10.563536] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
  1026. [   10.568529] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
  1027. [   10.573436] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
  1028. [   10.582713] E:camsys_sysctl_extdev(333): Sysctl 11 failed, because gpio is NULL!
  1029. [   10.591064] E:camsys_sysctl_extdev(333): Sysctl 8 failed, because gpio is NULL!
  1030. [   10.599312] E:camsys_sysctl_extdev(333): Sysctl 7 failed, because gpio is NULL!
  1031. [   10.609744] E:camsys_i2c_write(77): i2c write dev(addr:0x60) failed!
  1032. [   10.616059] E:camsys_sysctl_extdev(333): Sysctl 7 failed, because gpio is NULL!
  1033. [   10.623333] E:camsys_sysctl_extdev(333): Sysctl 8 failed, because gpio is NULL!
  1034. [   10.630555] E:camsys_sysctl_extdev(333): Sysctl 11 failed, because gpio is NULL!
  1035. [   10.638957] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
  1036. [   10.645606] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
  1037. [   10.654434] D1:camsys_extdev_deregister(308): Extdev(dev_id: 0x1000000) is deregister success
  1038. [   10.662866] D1:camsys_irq_disconnect(635): All thread disconnect camsys_marvin irq success!
  1039. [   10.671143] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  1040. [   10.678620] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  1041. [   10.686087] D1:camsys_release(734): camsys_marvin(ed87bd10) is closed
  1042. [   10.698684] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  1043. [   10.706067] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  1044. [   10.713422] D1:camsys_open(710): camsys_marvin(ed87bd10) is opened!
  1045. [   10.719693] rockchip_gpio_set:GPIO7-13 level = 0
  1046. [   10.724250] rockchip_gpio_direction_output:set GPIO7-13 level 0
  1047. [   10.730091] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
  1048. [   10.736787] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x207600,result=0x207600
  1049. [   10.747654] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
  1050. [   10.754455] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000400,result=0x400
  1051. [   10.761303] _rockchip_pinconf_set:GPIO7-13,group=isp_flash_trigger, function=isp_pin, type=3
  1052. [   10.769611] rk3288_calc_drv_reg_and_bit:GPIO7-13, drv_reg=0x74, bit=10
  1053. [   10.776064] _rockchip_pinconf_set:GPIO-7 13 data=0xc000000,type=3
  1054. [   10.782060] D1:camsys_extdev_register(248): Extdev(dev_id: 0x2000000) register success
  1055. [   10.794918] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
  1056. [   10.802874] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
  1057. [   10.807872] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
  1058. [   10.812784] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
  1059. [   10.822073] E:camsys_sysctl_extdev(333): Sysctl 11 failed, because gpio is NULL!
  1060. [   10.825471] rknand_sys_storage_open
  1061. [   10.825480] RKNAND_GET_DRM_KEY
  1062. [   10.825486] return ret = 0
  1063. [   10.839611] E:camsys_sysctl_extdev(333): Sysctl 8 failed, because gpio is NULL!
  1064. [   10.847867] E:camsys_sysctl_extdev(333): Sysctl 7 failed, because gpio is NULL!
  1065. [   10.858340] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
  1066. [   10.864666] E:camsys_sysctl_extdev(333): Sysctl 7 failed, because gpio is NULL!
  1067. [   10.871919] E:camsys_sysctl_extdev(333): Sysctl 8 failed, because gpio is NULL!
  1068. [   10.879274] E:camsys_sysctl_extdev(333): Sysctl 11 failed, because gpio is NULL!
  1069. [   10.886618] mali ffa30000.gpu: Unhandled Page fault in AS0 at VA 0x0000000100200900
  1070. [   10.886618] raw fault status 0x20001C2
  1071. [   10.886618] decoded fault status: SLAVE FAULT
  1072. [   10.886618] exception type 0xC2: TRANSLATION_FAULT
  1073. [   10.886618] access type 0x1: EXECUTE
  1074. [   10.886618] source id 0x200
  1075. [   10.913093] mali ffa30000.gpu: Issueing GPU                  soft-reset after hard stopping due to hardware issue
  1076. [   10.921903] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1077. [   10.932323] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
  1078. [   10.938949] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
  1079. [   10.947781] D1:camsys_extdev_deregister(308): Extdev(dev_id: 0x2000000) is deregister success
  1080. [   10.956200] D1:camsys_irq_disconnect(635): All thread disconnect camsys_marvin irq success!
  1081. [   10.964428] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  1082. [   10.971881] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  1083. [   10.979318] D1:camsys_release(734): camsys_marvin(ed87bd10) is closed
  1084. [   11.129071] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1085. [   11.176051] Enter::rk29_hw_params----52
  1086. [   11.180782] Enter:rk29_hw_params, 86, rate=44100
  1087. [   11.185327] Enter:rk29_hw_params, 104, LRCK=64
  1088. [   11.206959] hjc:hp_det_irq_handler>>>>
  1089. [   11.235612] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1090. [   11.305129] hjc:hp_detect_do_switch,irq=194
  1091. [   11.309264] mic_state_switch 0
  1092. [   11.312268] hp_det = 0,insert hp
  1093. [   11.315457] hp mic use intern
  1094. [   11.415103] Enter::rk29_hw_params----52
  1095. [   11.419829] Enter:rk29_hw_params, 86, rate=44100
  1096. [   11.424451] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1097. [   11.430723] mali ffa30000.gpu: Register state:
  1098. [   11.435093] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1099. [   11.442447] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1100. [   11.452700] mali ffa30000.gpu:   JS0_STATUS=0x00000008      JS0_HEAD_LO=0xb36ae640
  1101. [   11.460138] mali ffa30000.gpu:   JS1_STATUS=0x00000000      JS1_HEAD_LO=0xb36ae440
  1102. [   11.467575] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1103. [   11.475012] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1104. [   11.482791] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1105. [   11.492702] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1106. [   11.500310] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1107. [   11.507958] Enter:rk29_hw_params, 104, LRCK=64
  1108. [   11.508019] mali ffa30000.gpu: Job stuck in slot 0 on the GPU was cancelled
  1109. [   11.508026] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 0
  1110. [   11.508062] mali ffa30000.gpu: Reset complete
  1111. [   11.508141] mali ffa30000.gpu: Replaying jobs retry=0
  1112. [   11.508369] mali ffa30000.gpu: error detected from slot 0, job status 0x00000058 (DATA_INVALID_FAULT)
  1113. [   11.508377] mali ffa30000.gpu: t6xx: GPU fault 0x58 from job slot 0
  1114. [   11.508403] mali ffa30000.gpu: Replaying jobs retry=1
  1115. [   11.508448] mali ffa30000.gpu: kbasep_replay_parse_jc: failed to map jc
  1116. [   11.508590] fence error -14 on [ecb90900]
  1117. [   11.508619] objs:
  1118. [   11.508619] --------------
  1119. [   11.508619] fb-timeline sw_sync: 0
  1120. [   11.508619]
  1121. [   11.508619] malitl_139_0xb8469bf8 Mali: 0
  1122. [   11.508619]
  1123. [   11.508619] malitl_139_0xb846ee50 Mali: 1
  1124. [   11.508619]   pt error@11.156787: 1(-14)
  1125. [   11.508619]
  1126. [   11.508619] malitl_446_0xb7e0bc10 Mali: 0
  1127. [   11.508619]
  1128. [   11.508619] malitl_446_0xb7e0bf88 Mali: 0
  1129. [   11.508619]
  1130. [   11.508619] fences:
  1131. [   11.508619] --------------
  1132. [   11.508619] [ecb90900] mali_fence: error
  1133. [   11.508619]   malitl_139_0xb846ee50_pt error@11.156787: 1(-14) / 1
  1134. [   11.508619]
  1135. [   11.943748] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1136. [   11.951881] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1137. [   12.058420] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1138. [   12.072708] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1139. [   12.575071] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1140. [   12.581332] mali ffa30000.gpu: Register state:
  1141. [   12.585700] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1142. [   12.593051] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1143. [   12.603301] mali ffa30000.gpu:   JS0_STATUS=0x00000008      JS0_HEAD_LO=0xb4aec340
  1144. [   12.610729] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb36ae680
  1145. [   12.618165] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1146. [   12.625600] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1147. [   12.633378] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1148. [   12.643287] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1149. [   12.650894] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1150. [   12.658623] mali ffa30000.gpu: Job stuck in slot 0 on the GPU was cancelled
  1151. [   12.665467] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 0
  1152. [   12.671799] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1153. [   12.678637] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1154. [   12.685038] mali ffa30000.gpu: Reset complete
  1155. [   12.689572] es8323_mic_state_ctrl read:
  1156. [   12.693535] mic_state_switch 0
  1157. [   12.696564] hp_det = 0,insert hp
  1158. [   12.699757] hp mic use intern
  1159. [   12.702779] mali ffa30000.gpu: Replaying jobs retry=0
  1160. [   12.707914] mali ffa30000.gpu: Replaying jobs retry=0
  1161. [   12.712956] mali ffa30000.gpu: Job already not started
  1162. [   12.718197] fence error -14 on [ec427700]
  1163. [   12.722186] objs:
  1164. --------------
  1165. fb-timeline sw_sync: 0

  1167. malitl_139_0xb8469bf8 Mali: 0

  1169. malitl_139_0xb846ee50 Mali: 2
  1170.   pt error@11.156787: 1(-14)
  1171.   pt error@12.386062: 2(-14)

  1173. malitl_446_0xb7e0bc10 Mali: 1
  1174.   pt signaled@11.337980: 1(0)
  1175.   pt active: 2(0)
  1176.   pt active: 3(0)

  1178. malitl_446_0xb7e0bf88 Mali: 0

  1180. fences:
  1181. --------------
  1182. [ecb90900] mali_fence: error
  1183.   malitl_139_0xb846ee50_pt error@11.156787: 1(-14) / 2

  1185. [ec000180] mali_fence: signaled
  1186.   malitl_446_0xb7e0bc10_pt signaled@11.337980: 1(0) / 1

  1188. [ec000080] mali_fence: active
  1189.   malitl_446_0xb7e0bc10_pt active: 2(0) / 1

  1191. [ec427700] mali_fence: error
  1192.   malitl_139_0xb846ee50_pt error@12.386062: 2(-14) / 2

  1194. [ec000c80] mali_fence: active
  1195.   malitl_446_0xb7e0bc10_pt active: 3(0) / 1

  1197. [   12.953785] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1198. [   13.011125] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1199. [   13.068461] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1200. [   13.082729] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1201. [   13.142276] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1202. [   13.585097] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1203. [   13.591415] mali ffa30000.gpu: Register state:
  1204. [   13.595784] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1205. [   13.603136] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1206. [   13.613388] mali ffa30000.gpu:   JS0_STATUS=0x00000008      JS0_HEAD_LO=0xb4aec340
  1207. [   13.620824] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb42972c0
  1208. [   13.628260] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1209. [   13.635695] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1210. [   13.643473] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1211. [   13.653383] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1212. [   13.660991] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1213. [   13.668755] mali ffa30000.gpu: Job stuck in slot 0 on the GPU was cancelled
  1214. [   13.675601] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 0
  1215. [   13.681935] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1216. [   13.688775] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1217. [   13.695230] mali ffa30000.gpu: Reset complete
  1218. [   13.699583] mali ffa30000.gpu: Replaying jobs retry=1
  1219. [   13.704724] mali ffa30000.gpu: Replaying jobs retry=0
  1220. [   13.709797] mali ffa30000.gpu: Job already not started
  1221. [   13.914651] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1222. [   14.021195] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1223. [   14.035479] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1224. [   14.537846] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1225. [   14.544141] mali ffa30000.gpu: Register state:
  1226. [   14.548512] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1227. [   14.555866] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1228. [   14.566118] mali ffa30000.gpu:   JS0_STATUS=0x00000008      JS0_HEAD_LO=0xb4aec340
  1229. [   14.573556] mali ffa30000.gpu:   JS1_STATUS=0x00000000      JS1_HEAD_LO=0xb36ae500
  1230. [   14.580993] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1231. [   14.588430] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1232. [   14.596210] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1233. [   14.606121] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1234. [   14.613729] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1235. [   14.621521] mali ffa30000.gpu: Job stuck in slot 0 on the GPU was cancelled
  1236. [   14.628368] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 0
  1237. [   14.634763] mali ffa30000.gpu: Reset complete
  1238. [   14.639158] mali ffa30000.gpu: Replaying jobs retry=2
  1239. [   14.644148] mali ffa30000.gpu: GPU Fault 0x00000088 (UNKNOWN) at 0x000000007649e3c0
  1240. [   14.651672] mali ffa30000.gpu: There were multiple GPU faults - some have not been reported
  1241. [   14.660118] mali ffa30000.gpu: Unhandled Page fault in AS1 at VA 0x00000001111D51E0
  1242. [   14.660118] raw fault status 0x2A002C2
  1243. [   14.660118] decoded fault status: SLAVE FAULT
  1244. [   14.660118] exception type 0xC2: TRANSLATION_FAULT
  1245. [   14.660118] access type 0x2: READ
  1246. [   14.660118] source id 0x2A0
  1247. [   14.686365] mali ffa30000.gpu: Issueing GPU                  soft-reset after hard stopping due to hardware issue
  1248. [   14.695174] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1249. [   14.883101] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1250. [   14.891231] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1251. [   14.997767] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1252. [   15.197538] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1253. [   15.203818] mali ffa30000.gpu: Register state:
  1254. [   15.208189] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1255. [   15.215542] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1256. [   15.225793] mali ffa30000.gpu:   JS0_STATUS=0x00000008      JS0_HEAD_LO=0xb36ae700
  1257. [   15.233230] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb4aec2c0
  1258. [   15.240666] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1259. [   15.248102] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00ff0388
  1260. [   15.255883] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1261. [   15.265793] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1262. [   15.273401] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1263. [   15.773213] mali ffa30000.gpu: Failed to soft-reset GPU (timed out after 500 ms), now attempting a hard reset
  1264. [   15.783030] mali ffa30000.gpu: Job stuck in slot 0 on the GPU was cancelled
  1265. [   15.789881] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 0
  1266. [   15.796218] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1267. [   15.803059] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1268. [   15.809500] mali ffa30000.gpu: Reset complete
  1269. [   15.813871] mali ffa30000.gpu: Replaying jobs retry=0
  1270. [   15.818968] mali ffa30000.gpu: Replaying jobs retry=3
  1271. [   15.824035] mali ffa30000.gpu: Job already not started
  1272. [   15.844891] mali ffa30000.gpu: Flush for GPU page table update did not complete. Issueing GPU soft-reset to recover
  1273. [   15.855195] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1274. [   15.865601] mali ffa30000.gpu: Replaying jobs retry=0
  1275. [   16.020777] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1276. [   16.127316] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1277. [   16.357618] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1278. [   16.363928] mali ffa30000.gpu: Register state:
  1279. [   16.368299] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1280. [   16.375564] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  1281. [   16.382748] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1282. [   16.393004] mali ffa30000.gpu:   JS0_STATUS=0x00000000      JS0_HEAD_LO=0x00000000
  1283. [   16.400441] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb36ae680
  1284. [   16.407877] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1285. [   16.415311] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1286. [   16.423089] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1287. [   16.433000] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1288. [   16.440605] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1289. [   16.940392] mali ffa30000.gpu: Failed to soft-reset GPU (timed out after 500 ms), now attempting a hard reset
  1290. [   16.950198] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1291. [   16.957042] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1292. [   16.963475] mali ffa30000.gpu: Reset complete
  1293. [   16.967850] mali ffa30000.gpu: Replaying jobs retry=1
  1294. [   16.972864] mali ffa30000.gpu: Job already not started
  1295. [   17.002540] mali ffa30000.gpu: Flush for GPU page table update did not complete. Issueing GPU soft-reset to recover
  1296. [   17.012869] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1297. [   17.038977] mali ffa30000.gpu: Flush for GPU page table update did not complete. Issueing GPU soft-reset to recover
  1298. [   17.049332] fence error -14 on [edb2a200]
  1299. [   17.053342] objs:
  1300. [   17.053342] --------------
  1301. [   17.053342] fb-timeline sw_sync: 0
  1302. [   17.053342]
  1303. [   17.053342] malitl_139_0xb8469bf8 Mali: 1
  1304. [   17.053342]
  1305. [   17.053342] malitl_139_0xb846ee50 Mali: 3
  1306. [   17.053342]   pt error@11.156787: 1(-14)
  1307. [   17.053342]   pt error@12.386062: 2(-14)
  1308. [   17.053342]   pt error@16.787618: 3(-14)
  1309. [   17.053342]
  1310. [   17.053342] malitl_446_0xb7e0bc10 Mali: 4
  1311. [   17.053342]   pt signaled@13.399038: 2(-14)
  1312. [   17.092996]   pt signaled@13.399038: 3(0)
  1313.   pt error@13.399039: 4(-14)

  1315. malitl_446_0xb7e0bf88 Mali: 0

  1317. fences:
  1318. --------------
  1319. [ecb90900] mali_fence: error
  1320.   malitl_139_0xb846ee50_pt error@11.156787: 1(-14) / 3

  1322. [ec000080] mali_fence: signaled
  1323.   malitl_446_0xb7e0bc10_pt signaled@13.399038: 2(-14) / 4

  1325. [ec427700] mali_fence: error
  1326.   malitl_139_0xb846ee50_pt error@12.386062: 2(-14) / 3

  1328. [ec000c80] mali_fence: signaled
  1329.   malitl_446_0xb7e0bc10_pt signaled@13.399038: 3(0) / 4

  1331. [ee1d6d80] mali_fence: error
  1332.   malitl_446_0xb7e0bc10_pt error@13.399039: 4(-14) / 4

  1334. [edb2a200] mali_fence: error
  1335.   malitl_139_0xb846ee50_pt error@16.787618: 3(-14) / 3

  1337. [   17.186329] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1338. [   17.292872] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1339. [   17.515283] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1340. [   17.521545] mali ffa30000.gpu: Register state:
  1341. [   17.525914] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1342. [   17.533268] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1343. [   17.543519] mali ffa30000.gpu:   JS0_STATUS=0x00000000      JS0_HEAD_LO=0x00000000
  1344. [   17.550956] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb321e2c0
  1345. [   17.558393] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1346. [   17.565830] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1347. [   17.573609] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1348. [   17.583518] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1349. [   17.591131] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1350. [   18.090918] mali ffa30000.gpu: Failed to soft-reset GPU (timed out after 500 ms), now attempting a hard reset
  1351. [   18.100714] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1352. [   18.107557] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1353. [   18.113940] mali ffa30000.gpu: Reset complete
  1354. [   18.118287] mali ffa30000.gpu: Replaying jobs retry=1
  1355. [   18.123292] mali ffa30000.gpu: Job already not started
  1356. [   18.141894] mali ffa30000.gpu: Flush for GPU page table update did not complete. Issueing GPU soft-reset to recover
  1357. [   18.152210] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1358. [   18.162596] mali ffa30000.gpu: Replaying jobs retry=0
  1359. [   18.167622] mali ffa30000.gpu: Job already not started
  1360. [   18.186176] mali ffa30000.gpu: Flush for GPU page table update did not complete. Issueing GPU soft-reset to recover
  1361. [   18.344051] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1362. [   18.450596] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1363. [   18.654610] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1364. [   18.660913] mali ffa30000.gpu: Register state:
  1365. [   18.665286] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1366. [   18.672639] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1367. [   18.682892] mali ffa30000.gpu:   JS0_STATUS=0x00000000      JS0_HEAD_LO=0x00000000
  1368. [   18.690329] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb4aec2c0
  1369. [   18.697766] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1370. [   18.705203] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1371. [   18.712982] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1372. [   18.722893] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1373. [   18.730501] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1374. [   19.230284] mali ffa30000.gpu: Failed to soft-reset GPU (timed out after 500 ms), now attempting a hard reset
  1375. [   19.240087] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1376. [   19.246931] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1377. [   19.253396] mali ffa30000.gpu: Reset complete
  1378. [   19.476201] mali ffa30000.gpu: JS: Job Hard-Stopped (took more than 4 ticks at 50 ms/tick)
  1379. [   19.582747] mali ffa30000.gpu: JS: Job has been on the GPU for too long (KBASE_CONFIG_ATTR_JS_RESET_TICKS_SS/NSS timeout hit). Issueing GPU soft-reset to resolve.
  1380. [   19.597021] mali ffa30000.gpu: Preparing to soft-reset GPU: Waiting (upto 500 ms) for all jobs to complete soft-stop
  1381. [   19.659305] *****************vbus detect*******************
  1382. [   19.847776] Using Buffer DMA mode
  1383. [   19.851041] Periodic Transfer Interrupt Enhancement - disabled
  1384. [   19.856789] Multiprocessor Interrupt Enhancement - disabled
  1385. [   19.862267] OTG VER PARAM: 0, OTG VER FLAG: 0
  1386. [   19.866558] ^^^^^^^^^^^^^^^^^Device Mode
  1387. [   19.870449] *******************soft connect!!!*******************
  1388. [   20.068224] USB RESET
  1389. [   20.099389] mali ffa30000.gpu: Resetting GPU (allowing up to 500 ms)
  1390. [   20.105687] mali ffa30000.gpu: Register state:
  1391. [   20.110060] mali ffa30000.gpu:   GPU_IRQ_RAWSTAT=0x00000200 GPU_STATUS=0x00000009
  1392. [   20.117415] mali ffa30000.gpu:   JOB_IRQ_RAWSTAT=0x00000000 JOB_IRQ_JS_STATE=0x00000000 JOB_IRQ_THROTTLE=0x00000000
  1393. [   20.127667] mali ffa30000.gpu:   JS0_STATUS=0x00000000      JS0_HEAD_LO=0x00000000
  1394. [   20.135106] mali ffa30000.gpu:   JS1_STATUS=0x00000008      JS1_HEAD_LO=0xb36ae680
  1395. [   20.142543] mali ffa30000.gpu:   JS2_STATUS=0x00000000      JS2_HEAD_LO=0x00000000
  1396. [   20.149980] mali ffa30000.gpu:   MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
  1397. [   20.157759] mali ffa30000.gpu:   GPU_IRQ_MASK=0x00010581    JOB_IRQ_MASK=0x00070007     MMU_IRQ_MASK=0x00ff00ff
  1398. [   20.167669] mali ffa30000.gpu:   PWR_OVERRIDE0=0x00000000   PWR_OVERRIDE1=0x00000000
  1399. [   20.175277] mali ffa30000.gpu:   SHADER_CONFIG=0x00000000   L2_MMU_CONFIG=0x00000000
  1400. [   20.675088] mali ffa30000.gpu: Failed to soft-reset GPU (timed out after 500 ms), now attempting a hard reset
  1401. [   20.684889] mali ffa30000.gpu: Job stuck in slot 1 on the GPU was cancelled
  1402. [   20.691734] mali ffa30000.gpu: t6xx: GPU fault 0x4002 from job slot 1
  1403. [   20.698150] mali ffa30000.gpu: Reset complete
  1404. [   20.702496] mali ffa30000.gpu: Replaying jobs retry=0
  1405. [   20.707523] mali ffa30000.gpu: Job already not started
  1406. [   20.712795] fence error -14 on [eda69180]
  1407. [   20.716804] objs:
  1408. [   20.716804] --------------
  1409. [   20.716804] fb-timeline sw_sync: 0
  1410. [   20.716804]
  1411. [   20.716804] malitl_139_0xb8469bf8 Mali: 2
  1412. [   20.716804]
  1413. [   20.716804] malitl_139_0xb846ee50 Mali: 4
  1414. [   20.716804]   pt error@12.386062: 2(-14)
  1415. [   20.716804]   pt error@16.787618: 3(-14)
  1416. [   20.716804]   pt error@20.510649: 4(-14)
  1417. [   20.716804]
  1418. [   20.716804] malitl_446_0xb7e0bc10 Mali: 5
  1419. [   20.716804]   pt signaled@13.399038: 3(-14)
  1420. [   20.728644] USB RESET
  1421. [   20.758710]   pt error@13.399039: 4(-14)
  1422.   pt error@17.953419: 5(-14)

  1424. malitl_446_0xb7e0bf88 Mali: 0

  1426. fences:
  1427. --------------
  1428. [ec427700] mali_fence: error
  1429.   malitl_139_0xb846ee50_pt error@12.386062: 2(-14) / 4

  1431. [ec000c80] mali_fence: signaled
  1432.   malitl_446_0xb7e0bc10_pt signaled@13.399038: 3(-14) / 5

  1434. [ee1d6d80] mali_fence: error
  1435.   malitl_446_0xb7e0bc10_pt error@13.399039: 4(-14) / 5

  1437. [edb2a200] mali_fence: error
  1438.   malitl_139_0xb846ee50_pt error@16.787618: 3(-14) / 4

  1440. [ed6fcb80] mali_fence: error
  1441.   malitl_446_0xb7e0bc10_pt error@17.953419: 5(-14) / 5

  1443. [eda69180] mali_fence: error
  1444.   malitl_139_0xb846ee50_pt error@20.510649: 4(-14) / 4

  1446. [   20.816970] mali ffa30000.gpu: Replaying jobs retry=0
  1447. [   20.822082] mali ffa30000.gpu: Job already not started
  1448. [   21.017210] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1449. [   21.030972] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1450. [   21.233686] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1451. [   21.247443] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1452. [   21.254344] ###################WARNING:set voltage is error!voltage set is 1200000 mv -110
  1453. [   21.262464] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
  1454. [   21.459997] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1455. [   21.473745] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1456. [   21.480646] DVFS ERR:        dvfs_regulator_set_voltage_readback: set ERROR AND NOT effected, volt=937500
  1457. [   21.489505] DVFS ERR:        dvfs_scale_volt_direct: vd_arm set voltage up err ret = -110, Vnew = 1200000(was 1100000)mV
  1458. [   41.464701] INFO: rcu_preempt detected stalls on CPUs/tasks: { 0} (detected by 3, t=2102 jiffies, g=4294967253, c=4294967252, q=28)
  1459. [   41.476372] Backtrace for cpu 3 (current):
  1460. [   41.480400] CPU: 3 PID: 0 Comm: swapper/3 Tainted: P           O 3.10.0 #49
  1461. [   41.487256] [<c0013e04>] (unwind_backtrace+0x0/0xe0) from [<c0011720>] (show_stack+0x10/0x14)
  1462. [   41.495636] [<c0011720>] (show_stack+0x10/0x14) from [<c0012d1c>] (smp_send_all_cpu_backtrace+0x60/0xcc)
  1463. [   41.504956] [<c0012d1c>] (smp_send_all_cpu_backtrace+0x60/0xcc) from [<c009a84c>] (print_other_cpu_stall+0x264/0x2e0)
  1464. [   41.515384] [<c009a84c>] (print_other_cpu_stall+0x264/0x2e0) from [<c009b188>] (__rcu_pending+0x90/0x190)
  1465. [   41.524787] [<c009b188>] (__rcu_pending+0x90/0x190) from [<c009ce5c>] (rcu_check_callbacks+0x160/0x230)
  1466. [   41.534022] [<c009ce5c>] (rcu_check_callbacks+0x160/0x230) from [<c003bccc>] (update_process_times+0x38/0x64)
  1467. [   41.543769] [<c003bccc>] (update_process_times+0x38/0x64) from [<c00775c8>] (tick_sched_timer+0xac/0xe0)
  1468. [   41.553088] [<c00775c8>] (tick_sched_timer+0xac/0xe0) from [<c004fc2c>] (__run_hrtimer+0x1a4/0x2b8)
  1469. [   41.561980] [<c004fc2c>] (__run_hrtimer+0x1a4/0x2b8) from [<c0050818>] (hrtimer_interrupt+0x11c/0x278)
  1470. [   41.571127] [<c0050818>] (hrtimer_interrupt+0x11c/0x278) from [<c0517f10>] (arch_timer_handler_phys+0x28/0x30)
  1471. [   41.580958] [<c0517f10>] (arch_timer_handler_phys+0x28/0x30) from [<c00971a8>] (handle_percpu_devid_irq+0xf8/0x1b4)
  1472. [   41.591214] [<c00971a8>] (handle_percpu_devid_irq+0xf8/0x1b4) from [<c0093ddc>] (generic_handle_irq+0x20/0x30)
  1473. [   41.601047] [<c0093ddc>] (generic_handle_irq+0x20/0x30) from [<c000e3ac>] (handle_IRQ+0x64/0x8c)
  1474. [   41.609680] [<c000e3ac>] (handle_IRQ+0x64/0x8c) from [<c0008538>] (gic_handle_irq+0x34/0x58)
  1475. [   41.617974] [<c0008538>] (gic_handle_irq+0x34/0x58) from [<c000d600>] (__irq_svc+0x40/0x70)
  1476. [   41.626178] Exception stack(0xee0bdf30 to 0xee0bdf78)
  1477. [   41.631143] df20:                                     ee0bdf78 00000029 af8da25a 00000009
  1478. [   41.639179] df40: c1ed9318 00000000 adc44fcf 00000009 c0ce0e80 ee0bc000 c0ce0e90 00000000
  1479. [   41.647213] df60: 1024259a ee0bdf78 c006ff14 c04fcf80 60070013 ffffffff
  1480. [   41.653718] [<c000d600>] (__irq_svc+0x40/0x70) from [<c04fcf80>] (cpuidle_enter_state+0x54/0xec)
  1481. [   41.662355] [<c04fcf80>] (cpuidle_enter_state+0x54/0xec) from [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c)
  1482. [   41.671843] [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c) from [<c000e730>] (arch_cpu_idle+0x8/0x38)
  1483. [   41.680736] [<c000e730>] (arch_cpu_idle+0x8/0x38) from [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224)
  1484. [   41.689286] [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224) from [<c006f36c>] (freezing_slow_path+0x0/0x64)
  1485. [   41.698257]
  1486. [   41.698257] sending IPI to all other CPUs:
  1487. [   41.703736] IPI backtrace for cpu 1
  1488. [   41.707165]
  1489. [   41.708633] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P           O 3.10.0 #49
  1490. [   41.715474] task: ee093700 ti: ee0b8000 task.ti: ee0b8000
  1491. [   41.720780] PC is at cpuidle_enter_state+0x54/0xec
  1492. [   41.725489] LR is at ktime_get+0x98/0xdc
  1493. [   41.729345] pc : [<c04fcf80>]    lr : [<c006ff14>]    psr: 60010013
  1494. [   41.729345] sp : ee0b9f78  ip : 1024259a  fp : 00000000
  1495. [   41.740621] r10: c0ce0e90  r9 : ee0b8000  r8 : c0ce0e80
  1496. [   41.745754] r7 : 00000009  r6 : be065218  r5 : 00000000  r4 : c1ec7318
  1497. [   41.752167] r3 : 00000009  r2 : be086e22  r1 : 00000029  r0 : ee0b9f78
  1498. [   41.758574] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
  1499. [   41.765754] Control: 10c5387d  Table: 2d7a406a  DAC: 00000015
  1500. [   41.771399]
  1501. [   41.771399] PC: 0xc04fcf00:
  1502. [   41.775596] cf00  e1a00004 e12fff33 e8bd8010 e2411001 e3510000 aafffff5 e3e00012 e8bd8010
  1503. [   41.783728] cf20  e3e00012 e8bd8010 c0ccb310 e92d45f0 e3a0a04c e02a129a e24dd014 e1a04000
  1504. [   41.791860] cf40  e1a08001 e1a05002 e1a0000d ebedcbca e1a02005 e1a01008 e1a00004 e59a3054
  1505. [   41.799990] cf60  e28aa010 e1cd60d0 e12fff33 e1a05000 e1a0000d ebedcbc0 e1cd20d0 f1080080
  1506. [   41.808121] cf80  e0522006 e0c33007 e28d0008 ebecdb04 e59d000c e59f3078 e59d2008 e1a01fc0
  1507. [   41.816252] cfa0  e0e10293 e3a03000 e3e02102 e1520000 e0d3c001 b1a00002 e3550000 e5840008
  1508. [   41.824381] cfc0  e1a0c000 b3a03000 b5843008 ba00000d e3a01018 e0204591 e1c022d0 e092200c
  1509. [   41.832511] cfe0  e0a33fcc e285c001 e1c022f0 e3a00001 e00c0c91 e3a01000 e18420dc e0922000
  1510. [   41.840642]
  1511. [   41.840642] LR: 0xc006fe94:
  1512. [   41.844837] fe94  e59f00b0 e3001152 ebfef5f0 e59f50a8 e5958090 e3180001 0a000000 eafffffb
  1513. [   41.852969] feb4  f57ff05f e1c523d8 e5954000 e5951054 e0926001 e1a00004 e0a37fc1 e5943000
  1514. [   41.861098] fed4  e1cd60f0 e12fff33 e1c420d8 e0500002 e0c11003 e1c421d0 e0033001 e5951004
  1515. [   41.869230] fef4  e0022000 e0876192 e5952008 e0277391 e1c504d0 e0900006 e0a11007 eb07ca16
  1516. [   41.877359] ff14  e595c058 e090200c e0a13fcc f57ff05f e5951090 e1510008 1affffdc e59f101c
  1517. [   41.885489] ff34  e1a0000a e59d7000 e0e32791 e1ca20f0 e8bd85fe c0cd64dc c094fcf6 c0e0b580
  1518. [   41.893619] ff54  3b9aca00 e92d40f8 e1a07000 e59f5030 e2854094 e1a00004 eb1c7cf3 e1a01007
  1519. [   41.901749] ff74  e1a06000 e2850098 ebff86b9 e1a01006 e1a05000 e1a00004 eb1c7dba e1a00005
  1520. [   41.909878]
  1521. [   41.909878] SP: 0xee0b9ef8:
  1522. [   41.914074] 9ef8  00000007 c0012f60 fed91000 ee0b9f30 c0cd73dc ee0b9f64 c0ce0e80 ee0b8000
  1523. [   41.922204] 9f18  c0ce0e90 c0008554 c04fcf80 60010013 ffffffff c000d600 ee0b9f78 00000029
  1524. [   41.930335] 9f38  be086e22 00000009 c1ec7318 00000000 be065218 00000009 c0ce0e80 ee0b8000
  1525. [   41.938465] 9f58  c0ce0e90 00000000 1024259a ee0b9f78 c006ff14 c04fcf80 60010013 ffffffff
  1526. [   41.946594] 9f78  be086e22 00000009 ee0b8000 c1ec7318 ee0b8000 c1ec7318 00000000 c0d6838c
  1527. [   41.954724] 9f98  00000000 c0ce0e80 00000001 c04fd184 ee0b8000 ee0b8000 10c0387d c0794218
  1528. [   41.962854] 9fb8  0000406a 410fc0d1 00000000 c000e730 000358ae c006f2f4 c00081a4 2e09c06a
  1529. [   41.970984] 9fd8  00000015 10c0387d c0d6b34c 0000406a 00000000 c006f36c c00081a4 000081bc
  1530. [   41.979113]
  1531. [   41.979113] R0: 0xee0b9ef8:
  1532. [   41.983309] 9ef8  00000007 c0012f60 fed91000 ee0b9f30 c0cd73dc ee0b9f64 c0ce0e80 ee0b8000
  1533. [   41.991438] 9f18  c0ce0e90 c0008554 c04fcf80 60010013 ffffffff c000d600 ee0b9f78 00000029
  1534. [   41.999568] 9f38  be086e22 00000009 c1ec7318 00000000 be065218 00000009 c0ce0e80 ee0b8000
  1535. [   42.007699] 9f58  c0ce0e90 00000000 1024259a ee0b9f78 c006ff14 c04fcf80 60010013 ffffffff
  1536. [   42.015829] 9f78  be086e22 00000009 ee0b8000 c1ec7318 ee0b8000 c1ec7318 00000000 c0d6838c
  1537. [   42.023959] 9f98  00000000 c0ce0e80 00000001 c04fd184 ee0b8000 ee0b8000 10c0387d c0794218
  1538. [   42.032090] 9fb8  0000406a 410fc0d1 00000000 c000e730 000358ae c006f2f4 c00081a4 2e09c06a
  1539. [   42.040220] 9fd8  00000015 10c0387d c0d6b34c 0000406a 00000000 c006f36c c00081a4 000081bc
  1540. [   42.048352]
  1541. [   42.048352] R4: 0xc1ec7298:
  1542. [   42.052547] 7298  00000000 00000000 0e550e55 00000000 02030707 00000000 027e6f0a 00000000
  1543. [   42.060677] 72b8  00000000 00000000 027e6f0a 00000000 ed87c840 ee046200 06680668 00124f80
  1544. [   42.068807] 72d8  00124f80 001b7740 027e6f07 00000000 027e6f07 00000000 00000000 774f774f
  1545. [   42.076937] 72f8  c1ec72f8 c1ec72f8 00000001 00000000 00000000 00000000 c1ec7318 00000000
  1546. [   42.085066] 7318  00000003 00000001 0000018a 00000001 00000000 00000000 0000d8cb 00000000
  1547. [   42.093196] 7338  01cb73a4 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1548. [   42.101326] 7358  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1549. [   42.109456] 7378  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1550. [   42.117586]
  1551. [   42.117586] R8: 0xc0ce0e00:
  1552. [   42.121782] 0e00  e58511d4 e5901184 e5851210 e5901188 e5851214 e5901194 e5851250 e5901198
  1553. [   42.129912] 0e20  e5851254 e59011a4 e5851290 e59001a8 e5850294 e1a01007 e1a00005 ebfffeaa
  1554. [   42.138042] 0e40  e2866001 e3560002 3affffd2 e59402c0 e3700001 0a000003 e5901000 e59422c4
  1555. [   42.146173] 0e60  e1811002 e5801000 e59402c8 e3700001 08bd81f0 e3a00001 e8bd41f0 eafffe4f
  1556. [   42.154303] 0e80  c0949cc9 00000000 00000000 00000000 00494657 00000000 00000000 00000000
  1557. [   42.162432] 0ea0  204d5241 00494657 00000000 00000000 00000000 00000000 00000000 00000000
  1558. [   42.170563] 0ec0  00000001 00000001 ffffffff 00000001 00000000 c0020ea4 00000000 00000000
  1559. [   42.178692] 0ee0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1560. [   42.186823]
  1561. [   42.186823] R9: 0xee0b7f80:
  1562. [   42.191019] 7f80  ee0b7f80 ee0b7f80 00000000 00000000 ee0b7f90 ee0b7f90 ee0b7fac ee073f08
  1563. [   42.199149] 7fa0  c004c9f0 00000000 00000000 c000da98 00000000 00000000 00000000 00000000
  1564. [   42.207279] 7fc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1565. [   42.215409] 7fe0  00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
  1566. [   42.223539] 8000  00000000 00000003 00000000 ee093700 c0cf1ab8 00000001 00000015 ee093700
  1567. [   42.231671] 8020  c1ec7f40 ee0b8000 ed931a40 00000000 410fc0d1 ee199e00 ee0b9fbc ee0b9f38
  1568. [   42.239802] 8040  c078e644 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1569. [   42.247933] 8060  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1570. [   42.256063]
  1571. [   42.256063] R10: 0xc0ce0e10:
  1572. [   42.260344] 0e10  e5851214 e5901194 e5851250 e5901198 e5851254 e59011a4 e5851290 e59001a8
  1573. [   42.268475] 0e30  e5850294 e1a01007 e1a00005 ebfffeaa e2866001 e3560002 3affffd2 e59402c0
  1574. [   42.276605] 0e50  e3700001 0a000003 e5901000 e59422c4 e1811002 e5801000 e59402c8 e3700001
  1575. [   42.284735] 0e70  08bd81f0 e3a00001 e8bd41f0 eafffe4f c0949cc9 00000000 00000000 00000000
  1576. [   42.292865] 0e90  00494657 00000000 00000000 00000000 204d5241 00494657 00000000 00000000
  1577. [   42.300995] 0eb0  00000000 00000000 00000000 00000000 00000001 00000001 ffffffff 00000001
  1578. [   42.309124] 0ed0  00000000 c0020ea4 00000000 00000000 00000000 00000000 00000000 00000000
  1579. [   42.317254] 0ef0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1580. [   42.325387] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P           O 3.10.0 #49
  1581. [   42.332232] [<c0013e04>] (unwind_backtrace+0x0/0xe0) from [<c0011720>] (show_stack+0x10/0x14)
  1582. [   42.340611] [<c0011720>] (show_stack+0x10/0x14) from [<c0012f60>] (handle_IPI+0x1d8/0x2c8)
  1583. [   42.348732] [<c0012f60>] (handle_IPI+0x1d8/0x2c8) from [<c0008554>] (gic_handle_irq+0x50/0x58)
  1584. [   42.357194] [<c0008554>] (gic_handle_irq+0x50/0x58) from [<c000d600>] (__irq_svc+0x40/0x70)
  1585. [   42.365398] Exception stack(0xee0b9f30 to 0xee0b9f78)
  1586. [   42.370361] 9f20:                                     ee0b9f78 00000029 be086e22 00000009
  1587. [   42.378388] 9f40: c1ec7318 00000000 be065218 00000009 c0ce0e80 ee0b8000 c0ce0e90 00000000
  1588. [   42.386422] 9f60: 1024259a ee0b9f78 c006ff14 c04fcf80 60010013 ffffffff
  1589. [   42.392924] [<c000d600>] (__irq_svc+0x40/0x70) from [<c04fcf80>] (cpuidle_enter_state+0x54/0xec)
  1590. [   42.401559] [<c04fcf80>] (cpuidle_enter_state+0x54/0xec) from [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c)
  1591. [   42.411046] [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c) from [<c000e730>] (arch_cpu_idle+0x8/0x38)
  1592. [   42.419937] [<c000e730>] (arch_cpu_idle+0x8/0x38) from [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224)
  1593. [   42.428486] [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224) from [<c006f36c>] (freezing_slow_path+0x0/0x64)
  1594. [   42.437459] IPI backtrace for cpu 2
  1595. [   42.440887]
  1596. [   42.442355] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P           O 3.10.0 #49
  1597. [   42.449194] task: ee093c00 ti: ee0ba000 task.ti: ee0ba000
  1598. [   42.454500] PC is at cpuidle_enter_state+0x54/0xec
  1599. [   42.459208] LR is at ktime_get+0x98/0xdc
  1600. [   42.463064] pc : [<c04fcf80>]    lr : [<c006ff14>]    psr: 600b0013
  1601. [   42.463064] sp : ee0bbf78  ip : 1024259a  fp : 00000000
  1602. [   42.474340] r10: c0ce0e90  r9 : ee0ba000  r8 : c0ce0e80
  1603. [   42.479474] r7 : 00000009  r6 : bdd181c0  r5 : 00000000  r4 : c1ed0318
  1604. [   42.485886] r3 : 00000009  r2 : be086f46  r1 : 00000029  r0 : ee0bbf78
  1605. [   42.492298] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
  1606. [   42.499478] Control: 10c5387d  Table: 2caf806a  DAC: 00000015
  1607. [   42.505122]
  1608. [   42.505122] PC: 0xc04fcf00:
  1609. [   42.509318] cf00  e1a00004 e12fff33 e8bd8010 e2411001 e3510000 aafffff5 e3e00012 e8bd8010
  1610. [   42.517453] cf20  e3e00012 e8bd8010 c0ccb310 e92d45f0 e3a0a04c e02a129a e24dd014 e1a04000
  1611. [   42.525584] cf40  e1a08001 e1a05002 e1a0000d ebedcbca e1a02005 e1a01008 e1a00004 e59a3054
  1612. [   42.533717] cf60  e28aa010 e1cd60d0 e12fff33 e1a05000 e1a0000d ebedcbc0 e1cd20d0 f1080080
  1613. [   42.541850] cf80  e0522006 e0c33007 e28d0008 ebecdb04 e59d000c e59f3078 e59d2008 e1a01fc0
  1614. [   42.549981] cfa0  e0e10293 e3a03000 e3e02102 e1520000 e0d3c001 b1a00002 e3550000 e5840008
  1615. [   42.558112] cfc0  e1a0c000 b3a03000 b5843008 ba00000d e3a01018 e0204591 e1c022d0 e092200c
  1616. [   42.566244] cfe0  e0a33fcc e285c001 e1c022f0 e3a00001 e00c0c91 e3a01000 e18420dc e0922000
  1617. [   42.574376]
  1618. [   42.574376] LR: 0xc006fe94:
  1619. [   42.578572] fe94  e59f00b0 e3001152 ebfef5f0 e59f50a8 e5958090 e3180001 0a000000 eafffffb
  1620. [   42.586704] feb4  f57ff05f e1c523d8 e5954000 e5951054 e0926001 e1a00004 e0a37fc1 e5943000
  1621. [   42.594834] fed4  e1cd60f0 e12fff33 e1c420d8 e0500002 e0c11003 e1c421d0 e0033001 e5951004
  1622. [   42.602967] fef4  e0022000 e0876192 e5952008 e0277391 e1c504d0 e0900006 e0a11007 eb07ca16
  1623. [   42.611097] ff14  e595c058 e090200c e0a13fcc f57ff05f e5951090 e1510008 1affffdc e59f101c
  1624. [   42.619227] ff34  e1a0000a e59d7000 e0e32791 e1ca20f0 e8bd85fe c0cd64dc c094fcf6 c0e0b580
  1625. [   42.627359] ff54  3b9aca00 e92d40f8 e1a07000 e59f5030 e2854094 e1a00004 eb1c7cf3 e1a01007
  1626. [   42.635491] ff74  e1a06000 e2850098 ebff86b9 e1a01006 e1a05000 e1a00004 eb1c7dba e1a00005
  1627. [   42.643623]
  1628. [   42.643623] SP: 0xee0bbef8:
  1629. [   42.647819] bef8  00000007 c0012f60 fed91000 ee0bbf30 c0cd73dc ee0bbf64 c0ce0e80 ee0ba000
  1630. [   42.655950] bf18  c0ce0e90 c0008554 c04fcf80 600b0013 ffffffff c000d600 ee0bbf78 00000029
  1631. [   42.664082] bf38  be086f46 00000009 c1ed0318 00000000 bdd181c0 00000009 c0ce0e80 ee0ba000
  1632. [   42.672214] bf58  c0ce0e90 00000000 1024259a ee0bbf78 c006ff14 c04fcf80 600b0013 ffffffff
  1633. [   42.680345] bf78  be086f46 00000009 ee0ba000 c1ed0318 ee0ba000 c1ed0318 00000000 c0d6838c
  1634. [   42.688476] bf98  00000000 c0ce0e80 00000002 c04fd184 ee0ba000 ee0ba000 10c0387d c0794218
  1635. [   42.696608] bfb8  0000406a 410fc0d1 00000000 c000e730 000040d2 c006f2f4 c00081a4 2e09c06a
  1636. [   42.704739] bfd8  00000015 10c0387d c0d6b34c 0000406a 00000000 c006f36c c00081a4 000081bc
  1637. [   42.712870]
  1638. [   42.712870] R0: 0xee0bbef8:
  1639. [   42.717066] bef8  00000007 c0012f60 fed91000 ee0bbf30 c0cd73dc ee0bbf64 c0ce0e80 ee0ba000
  1640. [   42.725199] bf18  c0ce0e90 c0008554 c04fcf80 600b0013 ffffffff c000d600 ee0bbf78 00000029
  1641. [   42.733329] bf38  be086f46 00000009 c1ed0318 00000000 bdd181c0 00000009 c0ce0e80 ee0ba000
  1642. [   42.741460] bf58  c0ce0e90 00000000 1024259a ee0bbf78 c006ff14 c04fcf80 600b0013 ffffffff
  1643. [   42.749590] bf78  be086f46 00000009 ee0ba000 c1ed0318 ee0ba000 c1ed0318 00000000 c0d6838c
  1644. [   42.757718] bf98  00000000 c0ce0e80 00000002 c04fd184 ee0ba000 ee0ba000 10c0387d c0794218
  1645. [   42.765849] bfb8  0000406a 410fc0d1 00000000 c000e730 000040d2 c006f2f4 c00081a4 2e09c06a
  1646. [   42.773983] bfd8  00000015 10c0387d c0d6b34c 0000406a 00000000 c006f36c c00081a4 000081bc
  1647. [   42.782114]
  1648. [   42.782114] R4: 0xc1ed0298:
  1649. [   42.786310] 0298  00000000 00000000 09b109b1 00000000 024bfaa4 00000000 027e6ad1 00000000
  1650. [   42.794442] 02b8  00000000 00000000 027e6ad1 00000000 ed87c840 ee046200 04160416 00124f80
  1651. [   42.802573] 02d8  00124f80 001b7740 027e6acf 00000000 027e6acf 00000000 00000000 5c855c85
  1652. [   42.810703] 02f8  c1ed02f8 c1ed02f8 00000001 00000000 00000000 00000000 c1ed0318 00000000
  1653. [   42.818834] 0318  00000003 00000002 0000c33a 00000001 00000000 00000000 00001329 00000000
  1654. [   42.826966] 0338  01eddf49 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1655. [   42.835096] 0358  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1656. [   42.843225] 0378  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1657. [   42.851357]
  1658. [   42.851357] R8: 0xc0ce0e00:
  1659. [   42.855552] 0e00  e58511d4 e5901184 e5851210 e5901188 e5851214 e5901194 e5851250 e5901198
  1660. [   42.863682] 0e20  e5851254 e59011a4 e5851290 e59001a8 e5850294 e1a01007 e1a00005 ebfffeaa
  1661. [   42.871812] 0e40  e2866001 e3560002 3affffd2 e59402c0 e3700001 0a000003 e5901000 e59422c4
  1662. [   42.879945] 0e60  e1811002 e5801000 e59402c8 e3700001 08bd81f0 e3a00001 e8bd41f0 eafffe4f
  1663. [   42.888078] 0e80  c0949cc9 00000000 00000000 00000000 00494657 00000000 00000000 00000000
  1664. [   42.896209] 0ea0  204d5241 00494657 00000000 00000000 00000000 00000000 00000000 00000000
  1665. [   42.904339] 0ec0  00000001 00000001 ffffffff 00000001 00000000 c0020ea4 00000000 00000000
  1666. [   42.912470] 0ee0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1667. [   42.920602]
  1668. [   42.920602] R9: 0xee0b9f80:
  1669. [   42.924798] 9f80  ee0b8000 c1ec7318 ee0b8000 c1ec7318 00000000 c0d6838c 00000000 c0ce0e80
  1670. [   42.932930] 9fa0  00000001 c04fd184 ee0b8000 ee0b8000 10c0387d c0794218 0000406a 410fc0d1
  1671. [   42.941063] 9fc0  00000000 c000e730 00036cd6 c006f2f4 c00081a4 2e09c06a 00000015 10c0387d
  1672. [   42.949194] 9fe0  c0d6b34c 0000406a 00000000 c006f36c c00081a4 000081bc ffffffff ffffffff
  1673. [   42.957325] a000  00000000 00000003 00000000 ee093c00 c0cf1ab8 00000002 00000015 ee093c00
  1674. [   42.965456] a020  c1ed0f40 ee0ba000 ed43fc00 00000000 410fc0d1 ee19a800 ee0bbfbc ee0bbf38
  1675. [   42.973587] a040  c078e644 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1676. [   42.981717] a060  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1677. [   42.989846]
  1678. [   42.989846] R10: 0xc0ce0e10:
  1679. [   42.994128] 0e10  e5851214 e5901194 e5851250 e5901198 e5851254 e59011a4 e5851290 e59001a8
  1680. [   43.002258] 0e30  e5850294 e1a01007 e1a00005 ebfffeaa e2866001 e3560002 3affffd2 e59402c0
  1681. [   43.010389] 0e50  e3700001 0a000003 e5901000 e59422c4 e1811002 e5801000 e59402c8 e3700001
  1682. [   43.018521] 0e70  08bd81f0 e3a00001 e8bd41f0 eafffe4f c0949cc9 00000000 00000000 00000000
  1683. [   43.026653] 0e90  00494657 00000000 00000000 00000000 204d5241 00494657 00000000 00000000
  1684. [   43.034783] 0eb0  00000000 00000000 00000000 00000000 00000001 00000001 ffffffff 00000001
  1685. [   43.042913] 0ed0  00000000 c0020ea4 00000000 00000000 00000000 00000000 00000000 00000000
  1686. [   43.051044] 0ef0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  1687. [   43.059177] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P           O 3.10.0 #49
  1688. [   43.066022] [<c0013e04>] (unwind_backtrace+0x0/0xe0) from [<c0011720>] (show_stack+0x10/0x14)
  1689. [   43.074400] [<c0011720>] (show_stack+0x10/0x14) from [<c0012f60>] (handle_IPI+0x1d8/0x2c8)
  1690. [   43.082521] [<c0012f60>] (handle_IPI+0x1d8/0x2c8) from [<c0008554>] (gic_handle_irq+0x50/0x58)
  1691. [   43.090984] [<c0008554>] (gic_handle_irq+0x50/0x58) from [<c000d600>] (__irq_svc+0x40/0x70)
  1692. [   43.099188] Exception stack(0xee0bbf30 to 0xee0bbf78)
  1693. [   43.104152] bf20:                                     ee0bbf78 00000029 be086f46 00000009
  1694. [   43.112187] bf40: c1ed0318 00000000 bdd181c0 00000009 c0ce0e80 ee0ba000 c0ce0e90 00000000
  1695. [   43.120222] bf60: 1024259a ee0bbf78 c006ff14 c04fcf80 600b0013 ffffffff
  1696. [   43.126725] [<c000d600>] (__irq_svc+0x40/0x70) from [<c04fcf80>] (cpuidle_enter_state+0x54/0xec)
  1697. [   43.135361] [<c04fcf80>] (cpuidle_enter_state+0x54/0xec) from [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c)
  1698. [   43.144849] [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c) from [<c000e730>] (arch_cpu_idle+0x8/0x38)
  1699. [   43.153739] [<c000e730>] (arch_cpu_idle+0x8/0x38) from [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224)
  1700. [   43.162288] [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224) from [<c006f36c>] (freezing_slow_path+0x0/0x64)
  1701. [   51.737679] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1702. [   51.751437] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1703. [   51.758344] DVFS WARNING:    dvfs_reset_volt:vd(vd_arm) try to reload volt = 937500
  1704. [   51.954161] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1705. [   51.967918] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1706. [   52.170635] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1707. [   52.184392] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1708. [   52.191291] ###################WARNING:set voltage is error!voltage set is 1300000 mv -110
  1709. [   52.199409] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
  1710. [   52.396960] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1711. [   52.410716] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1712. [   52.417616] DVFS ERR:        dvfs_regulator_set_voltage_readback: set ERROR AND NOT effected, volt=937500
  1713. [   52.426569] DVFS ERR:        dvfs_scale_volt_direct: vd_arm set voltage up err ret = -110, Vnew = 1300000(was 937500)mV
  1714. [   75.442217] ------------[ cut here ]------------
  1715. [   75.446763] WARNING: at kernel/watchdog.c:259 watchdog_check_hardlockup_other_cpu+0xd0/0xf8()
  1716. [   75.455138] Watchdog detected hard LOCKUP on cpu 0
  1717. [   75.459672] Modules linked in: mali_kbase drmboot(PO)
  1718. [   75.464854] CPU: 3 PID: 0 Comm: swapper/3 Tainted: P           O 3.10.0 #49
  1719. [   75.471702] [<c0013e04>] (unwind_backtrace+0x0/0xe0) from [<c0011720>] (show_stack+0x10/0x14)
  1720. [   75.480084] [<c0011720>] (show_stack+0x10/0x14) from [<c002d648>] (warn_slowpath_common+0x4c/0x68)
  1721. [   75.488891] [<c002d648>] (warn_slowpath_common+0x4c/0x68) from [<c002d6e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1722. [   75.498296] [<c002d6e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c00937d4>] (watchdog_check_hardlockup_other_cpu+0xd0/0xf8)
  1723. [   75.508979] [<c00937d4>] (watchdog_check_hardlockup_other_cpu+0xd0/0xf8) from [<c0093834>] (watchdog_timer_fn+0x38/0x168)
  1724. [   75.519748] [<c0093834>] (watchdog_timer_fn+0x38/0x168) from [<c004fc2c>] (__run_hrtimer+0x1a4/0x2b8)
  1725. [   75.528809] [<c004fc2c>] (__run_hrtimer+0x1a4/0x2b8) from [<c0050818>] (hrtimer_interrupt+0x11c/0x278)
  1726. [   75.537956] [<c0050818>] (hrtimer_interrupt+0x11c/0x278) from [<c0517f10>] (arch_timer_handler_phys+0x28/0x30)
  1727. [   75.547785] [<c0517f10>] (arch_timer_handler_phys+0x28/0x30) from [<c00971a8>] (handle_percpu_devid_irq+0xf8/0x1b4)
  1728. [   75.558041] [<c00971a8>] (handle_percpu_devid_irq+0xf8/0x1b4) from [<c0093ddc>] (generic_handle_irq+0x20/0x30)
  1729. [   75.567870] [<c0093ddc>] (generic_handle_irq+0x20/0x30) from [<c000e3ac>] (handle_IRQ+0x64/0x8c)
  1730. [   75.576504] [<c000e3ac>] (handle_IRQ+0x64/0x8c) from [<c0008538>] (gic_handle_irq+0x34/0x58)
  1731. [   75.584797] [<c0008538>] (gic_handle_irq+0x34/0x58) from [<c000d600>] (__irq_svc+0x40/0x70)
  1732. [   75.593001] Exception stack(0xee0bdf30 to 0xee0bdf78)
  1733. [   75.597965] df20:                                     ee0bdf78 0000004b b9b39e6e 00000011
  1734. [   75.606000] df40: c1ed9318 00000000 b91b8612 00000011 c0ce0e80 ee0bc000 c0ce0e90 00000000
  1735. [   75.614034] df60: 1024259a ee0bdf78 c006ff14 c04fcf80 60070013 ffffffff
  1736. [   75.620538] [<c000d600>] (__irq_svc+0x40/0x70) from [<c04fcf80>] (cpuidle_enter_state+0x54/0xec)
  1737. [   75.629174] [<c04fcf80>] (cpuidle_enter_state+0x54/0xec) from [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c)
  1738. [   75.638662] [<c04fd184>] (cpuidle_idle_call+0x16c/0x27c) from [<c000e730>] (arch_cpu_idle+0x8/0x38)
  1739. [   75.647553] [<c000e730>] (arch_cpu_idle+0x8/0x38) from [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224)
  1740. [   75.656104] [<c006f2f4>] (cpu_idle_loop+0x1b8/0x224) from [<c006f36c>] (freezing_slow_path+0x0/0x64)
  1741. [   75.665075] ---[ end trace bb98ec6129aa180c ]---
  1742. [   75.865362] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1743. [   75.879120] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1744. [   75.886024] DVFS WARNING:    dvfs_reset_volt:vd(vd_arm) try to reload volt = 937500
  1745. [   76.081835] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1746. [   76.095592] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1747. [   76.298321] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1748. [   76.312078] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1749. [   76.318978] ###################WARNING:set voltage is error!voltage set is 1300000 mv -110
  1750. [   76.327097] DVFS ERR:        dvfs_regulator_set_voltage_readback: now read back to check voltage
  1751. [   76.524644] rockchip_i2c ff650000.i2c: Addr[0x0040] wait event timeout, state: 1, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x10
  1752. [   76.538401] rockchip_i2c ff650000.i2c: I2C_CON: start bit is set
  1753. [   76.545300] DVFS ERR:        dvfs_regulator_set_voltage_readback: set ERROR AND NOT effected, volt=937500
  1754. [   76.554253] DVFS ERR:        dvfs_scale_volt_direct: vd_arm set voltage up err ret = -110, Vnew = 1300000(was 937500)mV
Copy the code
Author: e97    Time: 4/30/2015 11:09
Sometimes, Firefly-RK3288 get stuck in boot loop..

  1. DDR Version 1.00 20141007
  2. In
  3. Channel a: DDR3 200MHz
  4. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  5. Channel b: DDR3 200MHz
  6. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  7. Memory OK
  8. Memory OK
  9. OUT


  12. U-Boot 2014.10-RK3288-02 (Jan 21 2015 - 17:07:53)

  14. CPU: rk3288
  15. CPU's clock information:
  16.     arm pll = 600000000HZ
  17.     periph pll = 300000000HZ
  18.     ddr pll = 200000000HZ
  19.     codec pll = 594000000HZ
  20. Board:  Rockchip platform Board
  21. DRAM:  Found dram banks:1
  22. Adding bank:0000000000000000(0000000080000000)
  23. 128 MiB
  24. storage init OK!
  25. Using default environment

  27. GetParam
  28. check parameter success
  29. Unknow param: MACHINE_MODEL:rk30sdk!
  30. Unknow param: MACHINE_ID:007!
  31. Unknow param: MANUFACTURER:RK30SDK!
  32. Unknow param: PWR_HLD: 0,0,A,0,1!
  33. power key: bank-0 pin-5
  34. light power led: bank-8 pin-1
  35. can't find dts node for ricoh619
  36. pmic:act8846
  37. Can't find dts node for fuel guage cw201x
  38. SecureBootEn = 0, SecureBootLock = 0

  40. #Boot ver: 2015-01-21#2.17
  41. empty serial no.
  42. checkKey
  43. vbus = 1
  44. no fuel gauge found
  45. no fuel gauge found
  46. read logo_on switch from dts [0]
  47. no fuel gauge found
  48. Hit any key to stop autoboot:  0
  49. kernel   @ 0x02000000 (0x005fc428)
  50. ramdisk  @ 0x04bf0000 (0x00121028)
  51. Secure Boot state: 0
  52. bootrk: do_bootm_linux...
  53.    Loading Device Tree to 0480c000, end 048271a4 ... OK
  54. Add bank:0000000000000000, 0000000080000000

  56. Starting kernel ...

  58. DDR Version 1.00 20141007
  59. In
  60. Channel a: DDR3 200MHz
  61. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  62. Channel b: DDR3 200MHz
  63. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  64. Memory OK
  65. Memory OK
  66. OUT


  69. U-Boot 2014.10-RK3288-02 (Jan 21 2015 - 17:07:53)

  71. CPU: rk3288
  72. CPU's clock information:
  73.     arm pll = 600000000HZ
  74.     periph pll = 300000000HZ
  75.     ddr pll = 200000000HZ
  76.     codec pll = 594000000HZ
  77. Board:  Rockchip platform Board
  78. DRAM:  Found dram banks:1
  79. Adding bank:0000000000000000(0000000080000000)
  80. 128 MiB
  81. storage init OK!
  82. Using default environment

  84. GetParam
  85. check parameter success
  86. Unknow param: MACHINE_MODEL:rk30sdk!
  87. Unknow param: MACHINE_ID:007!
  88. Unknow param: MANUFACTURER:RK30SDK!
  89. Unknow param: PWR_HLD: 0,0,A,0,1!
  90. power key: bank-0 pin-5
  91. light power led: bank-8 pin-1
  92. can't find dts node for ricoh619
  93. pmic:act8846
  94. Can't find dts node for fuel guage cw201x
  95. SecureBootEn = 0, SecureBootLock = 0

  97. #Boot ver: 2015-01-21#2.17
  98. empty serial no.
  99. checkKey
  100. vbus = 1
  101. no fuel gauge found
  102. no fuel gauge found
  103. read logo_on switch from dts [0]
  104. no fuel gauge found
  105. Hit any key to stop autoboot:  0
  106. kernel   @ 0x02000000 (0x005fc428)
  107. ramdisk  @ 0x04bf0000 (0x00121028)
  108. Secure Boot state: 0
  109. bootrk: do_bootm_linux...
  110.    Loading Device Tree to 0480c000, end 048271a4 ... OK
  111. Add bank:0000000000000000, 0000000080000000

  113. Starting kernel ...

  115. DDR Version 1.00 20141007
  116. In
  117. Channel a: DDR3 200MHz
  118. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  119. Channel b: DDR3 200MHz
  120. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  121. Memory OK
  122. Memory OK
  123. OUT


  126. U-Boot 2014.10-RK3288-02 (Jan 21 2015 - 17:07:53)

  128. CPU: rk3288
  129. CPU's clock information:
  130.     arm pll = 600000000HZ
  131.     periph pll = 300000000HZ
  132.     ddr pll = 200000000HZ
  133.     codec pll = 594000000HZ
  134. Board:  Rockchip platform Board
  135. DRAM:  Found dram banks:1
  136. Adding bank:0000000000000000(0000000080000000)
  137. 128 MiB
  138. storage init OK!
  139. Using default environment

  141. GetParam
  142. check parameter success
  143. Unknow param: MACHINE_MODEL:rk30sdk!
  144. Unknow param: MACHINE_ID:007!
  145. Unknow param: MANUFACTURER:RK30SDK!
  146. Unknow param: PWR_HLD: 0,0,A,0,1!
  147. power key: bank-0 pin-5
  148. light power led: bank-8 pin-1
  149. can't find dts node for ricoh619
  150. pmic:act8846
  151. Can't find dts node for fuel guage cw201x
  152. SecureBootEn = 0, SecureBootLock = 0

  154. #Boot ver: 2015-01-21#2.17
  155. empty serial no.
  156. checkKey
  157. vbus = 1
  158. no fuel gauge found
  159. no fuel gauge found
  160. read logo_on switch from dts [0]
  161. no fuel gauge found
  162. Hit any key to stop autoboot:  0
  163. <<<<<<<< PRESS SPACE >>>>>>>>
  164. rkboot #
Copy the code
Author: zhansb    Time: 4/30/2015 11:13
it seem GPU broken,have you check your power or did some hardware modifying?
Author: e97    Time: 4/30/2015 11:17
zhansb Posted at 4/30/2015 11:13
it seem GPU broken,have you check your power or did some hardware modifying?

Hi zhansb,

I haven't made any hardware modification.  Every once in a while Firefly logo will show up on HDMI TV, but after only blank screen but it seems HDMI signal is still there.

I checked power supply (one that came with Firefly-RK3288) and it is at 5.36 V and 2.7 A
Author: e97    Time: 5/3/2015 06:11
Last edited by e97 In 5/3/2015 06:14 Editor

So I did some more debugging.. tested our app on another Firefly board and it works fine.  

What's strange is that my board will boot sometimes and the CPU and everything else is OK but only the GPU has errors. Every once in a while the HDMI will work and I will see the Firefly logo via HDMI, but it immediately goes black after booting into the kernel. Since the GPU is integrated into the SoC, this leads me to believe I have a bad chip.

If this is the case, does Firefly offer a warranty on their hardware? 1 year seems typical for most devices like this.. I'd really appreciate if you could send me a replacement and I could send this board back to you for you to investigate.
Author: e97    Time: 5/21/2015 07:30
Update: Seems it is a hardware issue. Sending back my board and going to receive a replacement. Super big thanks for the support Firefly team!!



Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1