300-430證照指南 - 300-430證照Fast2test是個為Cisco 300-430 認證考試提供短期的有效培訓的網站，但是Fast2test能保證你的Cisco 300-430 認證考試及格。如果你不及格，我們會全額退款。在你選擇購買Fast2test的產品之前，你可以在Fast2test的網站上免費下載我們提供的部分關於Cisco 300-430認證考試的練習題及答案作為嘗試，那樣你會更有信心選擇Fast2test的產品來準備你的Cisco 300-430 認證考試。 最新的 CCNP Enterprise 300-430 免費考試真題 (Q274-Q279):問題 #274
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?
A. 24 hours
B. 3 days
C. 7 days
D. 3 hours
答案：C
問題 #275
#300 #301 A network administrator managing a Cisco Catalyst 9800-80 WLC must place all iOS connected devices to the guest SSID on VLAN 101. The rest of the clients must connect on VLAN 102 to distribute load across subnets. To achieve this configuration, the administrator configures a local policy on the WLC. Which two configurations are required? (Choose two.) KO O
A. Assign a policy map under global security policy settings.
B. Add local profiling policy under global security policy settings
C. Enable device classification on global wireless settings. "
D. Allow HTTP and DHCP profiling under policy map.
E. Create a service template
答案：C,E
問題 #276
Refer to the exhibit.
The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?
A. The Cisco CMX server receives NMSP traffic from the WLC.
B. The Cisco CMX server receives NetFlow data from the WLC.
C. The Cisco CMX server receives Angle-of-Arrival data from the WL
D. The Cisco CMX server receives SNMP traffic from the WL
問題 #277
A network engineer must get an autonomous AP to authenticate to the upstream switch via IEEE 802.1 X.
Drag and drop the commands from the left onto the right to complete the configuration. 答案：
解題說明：
Explanation:
Graphical user interface, application, Word Description automatically generated
問題 #278
After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802. 11 interferers. After surveying the area, it has been decided that RRM should not change the channel. Which feature must be enabled to ignore non-802.11 interference?
A. Avoid Foreign AP Interference
B. Avoid Cisco AP Load
C. Avoid Non-802. 11 Noise
D. Avoid Persistent Non-WIFI Interference
答案：D
解題說明： https://www.cisco.com/c/en/us/td ... rce-management.html Check the Avoid Non-802.11a (802.11b) Noise check box to cause the controller's RRM algorithms to consider noise (non-802.11 traffic) in the channel when assigning channels to lightweight access points, or uncheck it to disable this feature. For example, RRM may have access points avoid channels with significant interference from nonaccess point sources, such as microwave ovens. The default value is selected.
Check the Avoid Persistent Non-WiFi Interference check box to configure the controller to stop ignoring persistent non-Wi-Fi interference in new channel calculation. The persistent non-Wi-Fi interference is considered during the metric calculation for channels. https://www.cisco.com/c/en/us/td ... rce_management.html
