Firefly Open Source Community

Title: FSCP Valid Exam Practice, FSCP Pass4sure Pass Guide [Print This Page]
Author: tomward743    Time: yesterday 18:42
Title: FSCP Valid Exam Practice, FSCP Pass4sure Pass Guide
P.S. Free 2026 Forescout FSCP dumps are available on Google Drive shared by PDFVCE: https://drive.google.com/open?id=1dlIJ9PT7ZFR3kOQqK0nb_oTqyeHalBqo
With high pass rate of 99% to 100% of our FSCP training guide, obviously such positive pass rate will establish you confidence as well as strengthen your will to pass your exam. No other vendors can challenge our data in this market. At the same time, by studying with our FSCP practice materials, you avoid wasting your precious time on randomly looking for the key point information, and being upset about the accuracy when you compare with the information with the exam content. Our FSCP Training Materials provide a smooth road for you to success.
Our PDFVCE FSCP exam certification training material is the collection of experience and innovation results of highly certified IT professionals in IT industry. We guarantee that after you buy PDFVCE FSCP certification exam training materials, we will provide free renewal service for one year. If FSCP Exam Certification training materials have any quality problem or you fail FSCP exam certification, we will give a full refund unconditionally.
>> FSCP Valid Exam Practice <<
Forescout FSCP Pass4sure Pass Guide | FSCP Pass GuideAs for the structure of content, please believe that our team of experts has many years of experience in compiling and designing on the FSCP exam questions. I can say that no persion can know the FSCP study materials than them for they have been devoting themselves in this career for ten years. And they know every detail about the FSCP learning guide. No matter how high your request is, our FSCP learning quiz must satisfy you.
Forescout FSCP Exam Syllabus Topics:
TopicDetails
Topic 1
  • Advanced Product Topics Certificates and Identity Tracking: This section of the exam measures skills of identity and access control specialists and security engineers, and covers the management of digital certificates, PKI integration, identity tracking mechanisms, and how those support enforcement and audit capability within the system.
Topic 2
  • Advanced Troubleshooting: This section of the exam measures skills of operations leads and senior technical support engineers, and covers diagnosing complex issues across component interactions, policy enforcement failures, plugin misbehavior, and end to end workflows requiring root cause analysis and corrective strategy rather than just surface level fixes.
Topic 3
  • Plugin Tuning HPS: This section of the exam measures skills of plugin developers and endpoint integration engineers, and covers tuning the Host Property Scanner (HPS) plugin: how to profile endpoints, refine scanning logic, handle exceptions, and ensure accurate host attribute collection for enforcement.
Topic 4
  • General Review of FSCA Topics: This section of the exam measures skills of network security engineers and system administrators, and covers a broad refresh of foundational platform concepts, including architecture, asset identification, and initial deployment considerations. It ensures you are fluent in relevant baseline topics before moving into more advanced areas.|. Policy Best Practices: This section of the exam measures skills of security policy architects and operational administrators, and covers how to design and enforce robust policies effectively, emphasizing maintainability, clarity, and alignment with organizational goals rather than just technical configuration.
Topic 5
  • Notifications: This section of the exam measures skills of monitoring and incident response professionals and system administrators, and covers how notifications are configured, triggered, routed, and managed so that alerts and reports tie into incident workflows and stakeholder communication.
Topic 6
  • Plugin Tuning User Directory: This section of the exam measures skills of directory services integrators and identity engineers, and covers tuning plugins that integrate with user directories: configuration, mapping of directory attributes to platform policies, performance considerations, and security implications.

Forescout Certified Professional Exam Sample Questions (Q60-Q65):NEW QUESTION # 60
What is required for CounterAct to parse DHCP traffic?
Answer: A
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout DHCP Classifier Plugin Configuration Guide Version 2.1, the DHCP Classifier Plugin must be running for CounterACT to parse DHCP traffic. The documentation explicitly states:
"For endpoint DHCP classification, the DHCP Classifier Plugin must be running on a CounterACT device capable of receiving the DHCP client requests." DHCP Classifier Plugin Function:
The DHCP Classifier Plugin is a component of the Forescout Core Extensions Module. According to the official documentation:
"The DHCP Classifier Plugin extracts host information from DHCP messages. Hosts communicate with DHCP servers to acquire and maintain their network addresses. CounterACT extracts host information from DHCP message packets, and uses DHCP fingerprinting to determine the operating system and other host configuration information." How the DHCP Classifier Plugin Works:
According to the configuration guide:
* Plugin is Passive - "The plugin is passive, and does not intervene with the underlying DHCP exchange"
* Inspects Client Requests - "It inspects the client request messages (DHCP fingerprint) to propagate DHCP information about the connected client to CounterACT"
* Extracts Properties - Extracts properties like:
* Operating system fingerprint
* Device hostname
* Vendor/device class information
* Other host configuration data
DHCP Traffic Detection Methods:
The DHCP Classifier Plugin can detect DHCP traffic through multiple methods:
* Direct Monitoring - The CounterACT device monitors DHCP broadcast messages from the same IP subnet
* Mirrored Traffic - Receives mirrored traffic from DHCP directly
* Replicated Messages - Receives DHCP requests forwarded/replicated from network devices
* DHCP Relay Configuration - Receives explicitly relayed DHCP requests from DHCP relays Plugin Requirements:
According to the documentation:
"No plugin configuration is required."
However, the plugin must be running on at least one CounterACT device for DHCP parsing to occur.
Why Other Options Are Incorrect:
* A. Must see symmetrical traffic - While symmetrical network monitoring helps, it's not the requirement; the specific requirement is that the DHCP Classifier Plugin must be running
* B. The enterprise manager must see DHCP traffic - Any CounterACT device capable of receiving DHCP traffic can parse it, not just the Enterprise Manager
* C. DNS client must be running - DNS services are not required for DHCP parsing; they are separate services
* E. Plugin located in Network module - The DHCP Classifier Plugin is part of the Core Extensions Module, not the Network module DHCP Classifier Plugin as Part of Core Extensions Module:
According to the documentation:
"DHCP Classifier Plugin: Extracts host information from DHCP messages." The DHCP Classifier Plugin is installed with and part of the Forescout Core Extensions Module, which includes multiple components:
* Advanced Tools Plugin
* CEF Plugin
* DHCP Classifier Plugin
* DNS Client Plugin
* Device Classification Engine
* And others
Referenced Documentation:
* Forescout DHCP Classifier Plugin Configuration Guide Version 2.1
* About the DHCP Classifier Plugin documentation
* Port Mirroring Information Based on Specific Protocols
* Forescout Platform Base Modules

NEW QUESTION # 61
Which of the following is an example of a remediation action?
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide - Remediate Actions, "Start Antivirus update" is an example of a remediation action.
Remediation Actions Definition:
According to the Remediate Actions documentation:
"Remediation actions are actions that address compliance issues by taking corrective measures on endpoints.
These actions fix, update, or improve the security posture of non-compliant endpoints." Examples of Remediation Actions:
According to the documentation:
Remediation actions include:
* Start Antivirus Update - Updates antivirus definitions on the endpoint
* Update Antivirus - Updates antivirus software
* Start Windows Updates - Initiates Windows security patches
* Enable Firewall - Activates Windows firewall
* Disable USB - Restricts USB access
Why Other Options Are Incorrect:
* A. Start SecureConnector - This is a deployment action, not remediation
* C. Assign to VLAN - This is a containment/isolation action (Switch Remediate Action), not a remediation action
* D. Switch port block - This is a containment/restrict action (Switch Restrict Action), not remediation
* E. HTTP login - This is authentication, not a remediation action
Action Categories:
According to the documentation:
Category
Examples
Purpose
Remediate Actions
Start Antivirus, Windows Updates, Enable Firewall
Fix compliance issues
Restrict Actions
Switch Block, Port Block, ACL
Contain threats
Remediate Actions (Switch)
Assign to VLAN (quarantine)
Move to isolated VLAN
Deployment
Start SecureConnector
Deploy agents
Referenced Documentation:
* Remediate Actions
* Switch Remediate Actions
* Switch Restrict Actions

NEW QUESTION # 62
Main rules are executed independently of each other. However, one policy may be set to run first by configuring which of the following?
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Administration Guide, one policy can be set to run first by categorizing the Policy as a classifier. Classifier policies run before other policy types.
Policy Categorization and Execution Order:
According to the Forescout Administration Guide:
Forescout supports different policy categories, and these categories determine execution order:
* Classifier Policies - Run FIRST
* Used for initial device classification
* Establish basic device properties (OS, Function, Network Function)
* Must complete before other policies can evaluate classification properties
* Assessment Policies - Run AFTER classifiers
* Assess compliance based on classified properties
* Depend on classifier output
* Control/Action Policies - Run LAST
* Apply remediation actions
* Depend on assessment results
How Classifier Policies Run First:
According to the documentation:
"When you categorize a policy as a classifier, it runs before assessment and action policies. This allows the classified properties to be established before other policies attempt to evaluate them." Reason for Classifier Priority:
According to the policy execution guidelines:
Classifier policies must run first because:
* Dependency Resolution - Other policies depend on classification properties
* Property Population - Classifiers populate device properties used by other policies
* Execution Efficiency - Classifiers determine what type of device is being evaluated
* Logical Flow - You must know what a device is before assessing or controlling it Why Other Options Are Incorrect:
* A. There is no way to cause one policy to run first - Incorrect; categorization determines execution order
* B. Setting Main Rule condition to utilize primary classification - While main rule conditions can reference classification, this doesn't change policy execution order
* C. Categorizing the Policy as an assessment policy - Assessment policies run AFTER classifier policies, not first
* E. Using Irresolvable criteria - Irresolvable criteria handling doesn't affect policy execution order Policy Categorization Example:
According to the documentation:
text
Policy Execution Order:
1. CLASSIFIER Policies (Run First)
- "Device Classification Policy" (categorized as Classifier)
- Resolves: OS, Function, Network Function
2. ASSESSMENT Policies (Run Second)
- "Windows Compliance Policy" (categorized as Assessment)
- Depends on classification from step 1
3. ACTION Policies (Run Last)
- "Remediate Non-Compliant Devices" (categorized as Control)
- Depends on assessment from step 2
In this workflow, because "Device Classification Policy" is categorized as a Classifier, it executes first, populating device properties that the subsequent Assessment and Action policies need.
Referenced Documentation:
* ForeScout CounterACT Administration Guide - Policy Categorization
* Categorize Endpoint Authorizations - Policy Categories and Execution

NEW QUESTION # 63
When troubleshooting a SecureConnector management issue for a Windows host, how would you determine if SecureConnector management packets are reaching CounterACT successfully?
Answer: E
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Quick Installation Guide and official port configuration documentation, SecureConnector for Windows uses TCP port 10003, and the management packets should be captured from the host IP address reaching the management port (not the monitor port). Therefore, the correct command would use tcpdump filtering for tcp port 10003 traffic reaching the management port.
SecureConnector Port Assignments:
According to the official documentation:
SecureConnector Type
Port
Protocol
Function
Windows
10003/TCP
TLS (encrypted)
Allows SecureConnector to create a secure encrypted TLS connection to the Appliance from Windows machines OS X
10005/TCP
TLS (encrypted)
Allows SecureConnector to create a secure encrypted TLS connection to the Appliance from OS X machines Linux
10006/TCP
TLS 1.2 (encrypted)
Allows SecureConnector to create a secure connection over TLS 1.2 to the Appliance from Linux machines Port 2200 is for Legacy Linux SecureConnector (older versions using SSH encryption), not for Windows.
Forescout Appliance Interface Types:
* Management Port - Used for administrative access and SecureConnector connections
* Monitor Port - Used for monitoring and analyzing network traffic
* Response Port - Used for policy actions and responses
SecureConnector connections reach the management port, not the monitor port.
Troubleshooting SecureConnector Connectivity:
To verify that SecureConnector management packets from a Windows host are successfully reaching CounterACT, use the following tcpdump command:
bash
tcpdump -i [management_interface] -nn "tcp port 10003 and src [windows_host_ip]" This command:
* Monitors the management interface
* Filters for TCP port 10003 traffic
* Captures packets from the Windows host IP address reaching the management port
* Verifies bidirectional TLS communication
Why Other Options Are Incorrect:
* A. tcp port 10005 from host IP reaching monitor port - Port 10005 is for OS X, not Windows; should reach management port, not monitor port
* B. tcp port 2200 reaching management port - Port 2200 is for legacy Linux SecureConnector with SSH, not Windows
* C. tcp port 10003 reaching monitor port - Port 10003 is correct for Windows, but should reach management port, not monitor port
* D. tcp port 2200 reaching management port - Port 2200 is for legacy Linux SecureConnector, not Windows SecureConnector Connection Process:
According to the documentation:
* SecureConnector on the Windows endpoint initiates a connection to port 10003
* Connection is established to the Appliance's management port
* When SecureConnector connects to an Appliance or Enterprise Manager, it is redirected to the Appliance to which its host is assigned
* Ensure port 10003 is open to all Appliances and Enterprise Manager for transparent mobility Referenced Documentation:
* Forescout Quick Installation Guide v8.2
* Forescout Quick Installation Guide v8.1
* Port configuration section: SecureConnector for Windows

NEW QUESTION # 64
Which of the following switch actions cannot both be used concurrently on the same switch?
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Switch Plugin Configuration Guide, Access Port ACL and Endpoint Address ACL cannot both be used concurrently on the same endpoint. These two actions are mutually exclusive because they both apply ACL rules to control traffic, but through different mechanisms, and attempting to apply both simultaneously creates a conflict.
Switch Restrict Actions Overview:
The Forescout Switch Plugin provides several restrict actions that can be applied to endpoints:
* Access Port ACL - Applies an operator-defined ACL to the access port of an endpoint
* Endpoint Address ACL - Applies an operator-defined ACL based on the endpoint's address (MAC or IP)
* Assign to VLAN - Assigns the endpoint to a specific VLAN
* Switch Block - Completely isolates endpoints by turning off their switch port Action Compatibility Rules:
According to the Switch Plugin Configuration Guide:
* Endpoint Address ACL vs Access Port ACL - These CANNOT be used together on the same endpoint because:
* Both actions modify switch filtering rules
* Both actions can conflict when applied simultaneously
* The Switch Plugin cannot determine priority between conflicting ACL configurations
* Applying both would create ambiguous filtering logic on the switch
Actions That CAN Be Used Together:
* Access Port ACL + Assign to VLAN -#Can be used concurrently
* Endpoint Address ACL + Assign to VLAN -#Can be used concurrently
* Switch Block + Assign to VLAN - This is semantically redundant (blocking takes precedence) but is allowed
* Access Port ACL + Switch Block -#Can be used concurrently (though Block takes precedence) Why Other Options Are Incorrect:
* A. Access Port ACL & Switch Block - These CAN be used concurrently; Switch Block would take precedence
* B. Switch Block & Assign to VLAN - These CAN be used concurrently (though redundant)
* C. Endpoint Address ACL & Assign to VLAN - These CAN be used concurrently
* E. Access Port ACL & Assign to VLAN - These CAN be used concurrently; they work on different aspects of port management ACL Action Definition:
According to the documentation:
* Access Port ACL - "Use the Access Port ACL action to define an ACL that addresses one or more than one access control scenario, which is then applied to an endpoint's switch port"
* Endpoint Address ACL - "Use the Endpoint Address ACL action to apply an operator-defined ACL, addressing one or more than one access control scenario, which is applied to an endpoint's address" Referenced Documentation:
* Forescout CounterACT Switch Plugin Configuration Guide Version 8.12
* Switch Plugin Configuration Guide v8.14.2
* Switch Restrict Actions documentation

NEW QUESTION # 65
......
We provide 24-hour online service for all customers who have purchased FSCP test guide. You can send us an email to ask questions at anytime, anywhere. For any questions you may have during the use of FSCP exam questions, our customer service staff will be patient to help you to solve them. At the same time, if you have problems with downloading and installing, Forescout Certified Professional Exam torrent prep also has dedicated staff that can provide you with remote online guidance. In order to allow you to use our products with confidence, FSCP Test Guide provide you with a 100% pass rate guarantee. Once you unfortunately fail the exam, we will give you a full refund, and our refund process is very simple.
FSCP Pass4sure Pass Guide: https://www.pdfvce.com/Forescout/FSCP-exam-pdf-dumps.html
P.S. Free 2026 Forescout FSCP dumps are available on Google Drive shared by PDFVCE: https://drive.google.com/open?id=1dlIJ9PT7ZFR3kOQqK0nb_oTqyeHalBqo




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1