Firefly Open Source Community

Title: D-PWF-OE-00 Reliable Test Questions & Valid D-PWF-OE-00 Test Questions [Print This Page]
Author: johnkin645    Time: yesterday 12:55
Title: D-PWF-OE-00 Reliable Test Questions & Valid D-PWF-OE-00 Test Questions
We Promise we will very happy to answer your question on our D-PWF-OE-00 exam braindumps with more patience and enthusiasm and try our utmost to help you out of some troubles. So don¡¯t hesitate to buy our {Examcode} study materials, we will give you the high-quality product and professional customer services. As long as you study with ourD-PWF-OE-00 learning guide, you will be sure to get your dreaming certification.
EMC D-PWF-OE-00 Exam Syllabus Topics:
TopicDetails
Topic 1
  • PowerFlex Upgrades: This domain covers understanding upgrade procedures and executing cluster upgrades to newer software versions.
Topic 2
  • PowerFlex Security: This section addresses security administration through managing user accounts and access privileges, integrating CloudLink for encryption, and configuring system alerting.
Topic 3
  • Protecting PowerFlex Storage: This section covers data protection through snapshot technology for point-in-time copies and volume replication between clusters for disaster recovery.
Topic 4
  • Expanding a PowerFlex Cluster: This domain focuses on cluster expansion and maintenance including using maintenance modes, adding nodes, configuring Storage Data Servers and Meta Data Managers, and understanding PowerFlex integration with APEX.

>> D-PWF-OE-00 Reliable Test Questions <<
Valid D-PWF-OE-00 Test Questions & D-PWF-OE-00 Test Dumps DemoNormally, you just need to wait for about five to ten minutes after you purchase our D-PWF-OE-00 learning braindumps. If you do not receive our D-PWF-OE-00 study materials, please contact our online workers. It is our great advantage to attract customers. In a word, our running efficiency on D-PWF-OE-00 Exam Questions is excellent. Time is priceless. Once you receive our email, just begin to your new learning journey.
EMC Dell PowerFlex Operate Exam Sample Questions (Q47-Q52):NEW QUESTION # 47
What is the minimum bandwidth requirement for replicating volumes between PowerFlex clusters?
Answer: A
Explanation:
* 100 Mbps: While PowerFlex replication is highly efficient and only sends unique data chunks (deltas), the supported minimum reliable bandwidth for a WAN link between clusters is typically 100 Mbps.
* Reasoning: Below this speed, even moderate change rates in a production database would likely cause the replication journal to fill up faster than data can be drained to the remote site. This would lead to a
"Buffer Full" state, causing the replication to pause or the system to lose its Recovery Point Objective (RPO) compliance.

NEW QUESTION # 48
While setting up a PowerFlex cluster, an administrator needs to create a Storage Pool. What tasks must they complete first?
Answer: A
Explanation:
This question tests your knowledge of the logical hierarchy in PowerFlex:
System $ightarrow$ Protection Domain $ightarrow$ Storage Pool $ightarrow$ Device (Disk)
$ightarrow$ Volume.
* Configure a Protection Domain (Option A): You cannot create a Storage Pool without a parent entity. The Protection Domain (PD) is the container that isolates a specific group of nodes. Once the PD is created, you create a Storage Pool inside it.
* The Workflow:
* Install SDS software on nodes.
* Create a Protection Domain (e.g., PD_1).
* Add SDS nodes to PD_1.
* Create a Storage Pool (e.g., Pool_SSD) inside PD_1.
* Add devices (drives) to Pool_SSD.
Options B and C are important validation steps, but A is the mandatory structural prerequisite.

NEW QUESTION # 49
What are the prerequisites for creating a Fault Set? (Choose two).
Answer: A,B
Explanation:
Fault Sets are a logical subdivision within a Protection Domain used to increase availability (e.g., ensuring that the three copies of data reside in three different racks).
* Predefined Protection Domain (Option B): Fault Sets exist inside a Protection Domain. You cannot create a Fault Set floating in the void; it must be assigned to a parent Protection Domain.
* At least 3 nodes in the cluster (Option A): PowerFlex uses a mesh-mirroring architecture. To guarantee availability, the system generally requires a minimum of 3 Fault Sets (so that if one fails, the data can be rebuilt to the other two). Since a Fault Set must contain at least one node, this implies a minimum requirement of 3 nodes (one per Fault Set) to utilize the feature effectively.
Note on Option C: You typically define Fault Sets before creating Storage Pools or adding SDSs in a greenfield deployment. If Storage Pools already exist, converting to Fault Sets is complex/restricted, so
"Existing Storage Pool" is not a prerequisite for creating the Fault Set structure itself.

NEW QUESTION # 50
During a PowerFlex deployment, which steps are required to complete resource discovery? (Choose two).
Answer: B,C
Explanation:
Resource discovery is the initial phase where PowerFlex Manager (PFxM) or the deployment tool identifies the hardware available to build the cluster.
* Assign IP addresses to all nodes (Option A): For the management system to "find" and communicate with the nodes (via iDRAC or OS agents), valid IP configurations on the management network are essential.
* Validate network connectivity (Option B): Before the software can be successfully deployed, the underlying network (L2/L3) must be verified. This includes ensuring the nodes can ping the Gateway, DNS, and NTP servers, and that the data networks (for SDS-to-SDS traffic) are routed or switched correctly.
Incorrect Options: Storage pools (C) are created after the cluster is deployed. vSphere (D) is not required for
"Resource Discovery" (PowerFlex can be bare metal or other hypervisors).

NEW QUESTION # 51
Which component is reconfigured when expanding metadata storage in PowerFlex?
Answer: C
Explanation:
Metadata in PowerFlex is not stored in the general user Storage Pools; it is managed and stored by the Metadata Manager (MDM) cluster.
When a PowerFlex cluster grows significantly (e.g., increasing from 1000 to 100,000 volumes, or adding hundreds of nodes), the metadata usage increases.
* Expanding Metadata Capabilities: You do not "expand" a metadata pool like you do a storage pool.
Instead, you might reconfigure the MDM Cluster itself. This could involve moving from a 3-node MDM cluster to a 5-node MDM cluster to distribute the processing load, or replacing the MDM nodes with hardware possessing larger RAM and faster CPUs.
Therefore, the component being reconfigured to handle this growth is the Metadata Manager (MDM).

NEW QUESTION # 52
......
According to the needs of all people, the experts and professors in our company designed three different versions of the D-PWF-OE-00 study materials for all customers. The three versions are very flexible for all customers to operate. According to your actual need, you can choose the version for yourself which is most suitable for you to preparing for the coming exam. All the D-PWF-OE-00 Study Materials of our company can be found in the three versions. It is very flexible for you to use the three versions of the D-PWF-OE-00 study materials to preparing for your coming exam.
Valid D-PWF-OE-00 Test Questions: https://www.dumpsvalid.com/D-PWF-OE-00-still-valid-exam.html




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1