Firefly Open Source Community

Title: Test NSE7_SOC_AR-7.6 Valid, Knowledge NSE7_SOC_AR-7.6 Points [Print This Page]
Author: emmatho414    Time: yesterday 18:42
Title: Test NSE7_SOC_AR-7.6 Valid, Knowledge NSE7_SOC_AR-7.6 Points
At this moment, our company has been regarded as the best retailer of the NSE7_SOC_AR-7.6 study materials. We are responsible for every customer. Your satisfactions on our NSE7_SOC_AR-7.6 exam braindumps are our great motivation. In addition, all people have the right to enjoy our good pre-sale and after sale service on our NSE7_SOC_AR-7.6 training guide. We warmly welcome every customer to select our NSE7_SOC_AR-7.6 learning questions.
If you want to get Fortinet certification, you can save a lot of time and effort with our NSE7_SOC_AR-7.6 study materials. We know that you must have a lot of other things to do, and our products will relieve your concerns in some ways. First of all, NSE7_SOC_AR-7.6 exam materials will combine your fragmented time for greater effectiveness, and secondly, you can use the shortest time to pass the exam to get your desired certification. Our NSE7_SOC_AR-7.6 Study Materials allow you to improve your competitiveness. With the help of our NSE7_SOC_AR-7.6 study guide, you will be the best star better than others
>> Test NSE7_SOC_AR-7.6 Valid <<
Knowledge NSE7_SOC_AR-7.6 Points & Dumps NSE7_SOC_AR-7.6 QuestionsWe should formulate a set of high efficient study plan to make the NSE7_SOC_AR-7.6 exam dumps easier to operate. Here our products strive for providing you a comfortable study platform and continuously upgrade NSE7_SOC_AR-7.6 test prep to meet every customer¡¯s requirements. Under the guidance of our NSE7_SOC_AR-7.6 Test Braindumps, 20-30 hours¡¯ preparation is enough to help you obtain the Fortinet certification, which means you can have more time to do your own business as well as keep a balance between a rest and taking exams.
Fortinet NSE 7 - Security Operations 7.6 Architect Sample Questions (Q49-Q54):NEW QUESTION # 49
Refer to Exhibit:
A SOC analyst is creating the Malicious File Detected playbook to run when FortiAnalyzer generates a malicious file event. The playbook must also update the incident with the malicious file event data.
What must the next task in this playbook be?
Answer: B
Explanation:
* Understanding the Playbook and its Components:
* The exhibit shows a playbook in which an event trigger starts actions upon detecting a malicious file.
* The initial tasks in the playbook include CREATE_INCIDENT and GET_EVENTS.
* Analysis of Current Tasks:
* EVENT_TRIGGER STARTER: This initiates the playbook when a specified event (malicious file detection) occurs.
* CREATE_INCIDENT: This task likely creates a new incident in the incident management system for tracking and response.
* GET_EVENTS: This task retrieves the event details related to the detected malicious file.
* Objective of the Next Task:
* The next logical step after creating an incident and retrieving event details is to update the incident with the event data, ensuring all relevant information is attached to the incident record.
* This helps SOC analysts by consolidating all pertinent details within the incident record, facilitating efficient tracking and response.
* Evaluating the Options:
* Option A:Update Asset and Identity is not directly relevant to attaching event data to the incident.
* Option B:Attach Data to Incident sounds plausible but typically, updating an incident involves more comprehensive changes including status updates, adding comments, and other data modifications.
* Option C:Run Report is irrelevant in this context as the goal is to update the incident with event data.
* Option D:Update Incident is the most suitable action for incorporating event data into the existing incident record.
* Conclusion:
* The next task in the playbook should be to update the incident with the event data to ensure the incident reflects all necessary information for further investigation and response.
References:
Fortinet Documentation on Playbook Creation and Incident Management.
Best Practices for Automating Incident Response in SOC Operations.

NEW QUESTION # 50
Which two ways can you create an incident on FortiAnalyzer? (Choose two.)
Answer: C,D
Explanation:
* Understanding Incident Creation in FortiAnalyzer:
* FortiAnalyzer allows for the creation of incidents to track and manage security events.
* Incidents can be created both automatically and manually based on detected events and predefined rules.
* Analyzing the Methods:
* Option A:Using a connector action typically involves integrating with other systems or services and is not a direct method for creating incidents on FortiAnalyzer.
* Option B:Incidents can be created manually on the Event Monitor page by selecting relevant events and creating incidents from those events.
* Option C:While playbooks can automate responses and actions, the direct creation of incidents is usually managed through event handlers or manual processes.
* Option D:Custom event handlers can be configured to trigger incident creation based on specific events or conditions, automating the process within FortiAnalyzer.
* Conclusion:
* The two valid methods for creating an incident on FortiAnalyzer are manually on the Event Monitor page and using a custom event handler.
References:
Fortinet Documentation on Incident Management in FortiAnalyzer.
FortiAnalyzer Event Handling and Customization Guides.

NEW QUESTION # 51
While monitoring your network, you discover that one FortiGate device is sending significantly more logs to FortiAnalyzer than all of the other FortiGate devices in the topology.
Additionally, the ADOM that the FortiGate devices are registered to consistently exceeds its quota.
What are two possible solutions? (Choose two.)
Answer: B,C
Explanation:
* Understanding the Problem:
* One FortiGate device is generating a significantly higher volume of logs compared to other devices, causing the ADOM to exceed its storage quota.
* This can lead to performance issues and difficulties in managing logs effectively within FortiAnalyzer.
* Possible Solutions:
* The goal is to manage the volume of logs and ensure that the ADOM does not exceed its quota, while still maintaining effective log analysis and monitoring.
* Solution A: Increase the Storage Space Quota for the First FortiGate Device:
* While increasing the storage space quota might provide a temporary relief, it does not address the root cause of the issue, which is the excessive log volume.
* This solution might not be sustainable in the long term as log volume could continue to grow.
* Not selected as it does not provide a long-term, efficient solution.
* Solution B: Create a Separate ADOM for the First FortiGate Device and Configure a Different Set of Storage Policies:
* Creating a separate ADOM allows for tailored storage policies and management specifically for the high-log-volume device.
* This can help in distributing the storage load and applying more stringent or customized retention and storage policies.
* Selected as it effectively manages the storage and organization of logs.
* Solution C: Reconfigure the First FortiGate Device to Reduce the Number of Logs it Forwards to FortiAnalyzer:
* By adjusting the logging settings on the FortiGate device, you can reduce the volume of logs forwarded to FortiAnalyzer.
* This can include disabling unnecessary logging, reducing the logging level, or filtering out less critical logs.
* Selected as it directly addresses the issue of excessive log volume.
* Solution D: Configure Data Selectors to Filter the Data Sent by the First FortiGate Device:
* Data selectors can be used to filter the logs sent to FortiAnalyzer, ensuring only relevant logs are forwarded.
* This can help in reducing the volume of logs but might require detailed configuration and regular updates to ensure critical logs are not missed.
* Not selected as it might not be as effective as reconfiguring logging settings directly on the FortiGate device.
* Implementation Steps:
* For Solution B:
* Step 1: Access FortiAnalyzer and navigate to the ADOM management section.
* Step 2: Create a new ADOM for the high-log-volume FortiGate device.
* Step 3: Register the FortiGate device to this new ADOM.
* Step 4: Configure specific storage policies for the new ADOM to manage log retention and storage.
* For Solution C:
* Step 1: Access the FortiGate device's configuration interface.
* Step 2: Navigate to the logging settings.
* Step 3: Adjust the logging level and disable unnecessary logs.
* Step 4: Save the configuration and monitor the log volume sent to FortiAnalyzer.
Fortinet Documentation on FortiAnalyzer ADOMs and log management FortiAnalyzer Administration Guide Fortinet Knowledge Base on configuring log settings on FortiGate FortiGate Logging Guide By creating a separate ADOM for the high-log-volume FortiGate device and reconfiguring its logging settings, you can effectively manage the log volume and ensure the ADOM does not exceed its quota.

NEW QUESTION # 52
Refer to Exhibit:
A SOC analyst is designing a playbook to filter for a high severity event and attach the event information to an incident.
Which local connector action must the analyst use in this scenario?
Answer: C
Explanation:
* Understanding the Playbook Requirements:
* The SOC analyst needs to design a playbook that filters for high severity events.
* The playbook must also attach the event information to an existing incident.
* Analyzing the Provided Exhibit:
* The exhibit shows the available actions for a local connector within the playbook.
* Actions listed include:
* Update Asset and Identity
* Get Events
* Get Endpoint Vulnerabilities
* Create Incident
* Update Incident
* Attach Data to Incident
* Run Report
* Get EPEU from Incident
* Evaluating the Options:
* Get Events:This action retrieves events but does not attach them to an incident.
* Update Incident:This action updates an existing incident but is not specifically for attaching event data.
* Update Asset and Identity:This action updates asset and identity information, not relevant for attaching event data to an incident.
* Attach Data to Incident:This action is explicitly designed to attach additional data, such as event information, to an existing incident.
* Conclusion:
* The correct action to use in the playbook for filtering high severity events and attaching the event information to an incident isAttach Data to Incident.
References:
Fortinet Documentation on Playbook Actions and Connectors.
Best Practices for Incident Management and Playbook Design in SOC Operations.

NEW QUESTION # 53
Which three are threat hunting activities? (Choose three answers)
Answer: A,B,E
Explanation:
Comprehensive and Detailed Explanation From FortiSOAR 7.6., FortiSIEM 7.3 Exact Extract study guide:
According to the specialized threat hunting modules and frameworks withinFortiSOAR 7.6and the advanced analytics capabilities ofFortiSIEM 7.3, threat hunting is defined as a proactive, human-led search for threats that have bypassed automated security controls. The three selected activities are core components of this lifecycle:
* Generate a hypothesis (C):This is the fundamental starting point of a "Structured Hunt." Analysts develop a testable theory-based on recent threat intelligence (such as a new TTP identified by FortiGuard) or environmental risk-about how an attacker might be operating undetected in the network.
* Enrich records with threat intelligence (A)uring the investigation phase, hunters use theThreat Intelligence Management (TIM)module in FortiSOAR to enrich technical data (IPs, hashes, URLs) with external context. This helps determine if an anomaly discovered during the hunt is indeed malicious or part of a known campaign.
* Perform packet analysis (D):Since advanced threats often live in the "gaps" between log files, hunters frequently perform deep-packet or network-flow analysis using FortiSIEM's query tools or integrated NDR (Network Detection and Response) data to identify suspicious lateral movement or C2 (Command and Control) communication patterns that standard alerts might miss.
Why other options are excluded:
* Automate workflows (B):While SOAR is designed for automation, the act of "automating" is a DevOps or SOC engineering task. Threat hunting itself is a proactive investigation; while playbooks canassista hunter (e.g., by automating the data gathering), the act of hunting remains a manual or semi-automated cognitive process.
* Tune correlation rules (E):Tuning rules is areactivemaintenance task or a "post-hunt" activity. Once a threat hunter finds a new attack pattern, they will then tune SIEM correlation rules to ensure that specific threat is detected automatically in the future. The tuning is theresultof the hunt, not the activity of hunting itself.

NEW QUESTION # 54
......
Different with other similar education platforms on the internet, the Fortinet NSE 7 - Security Operations 7.6 Architect guide torrent has a high hit rate, in the past, according to data from the students' learning to use the NSE7_SOC_AR-7.6 test torrent, 99% of these students can pass the qualification test and acquire the qualification of their yearning, this powerfully shows that the information provided by the NSE7_SOC_AR-7.6 Study Tool suit every key points perfectly, targeted training students a series of patterns and problem solving related routines, and let students answer up to similar topic.
Knowledge NSE7_SOC_AR-7.6 Points: https://www.testpassking.com/NSE7_SOC_AR-7.6-exam-testking-pass.html
Get your Fortinet s I NSE7_SOC_AR-7.6 dumps exam preparation questions and answers in form of NSE7_SOC_AR-7.6 PDF, The NSE7_SOC_AR-7.6 VCE dumps will be your personal think tank to help you master the important skills and knowledge, The Knowledge NSE7_SOC_AR-7.6 Points - Fortinet NSE 7 - Security Operations 7.6 Architect valid exam practice will lead you to the certification and the way of high position brighter future, When you purchase our NSE7_SOC_AR-7.6 Fortinet NSE 7 - Security Operations 7.6 Architect study dumps, you will enjoy one year free update.
The value of Crystal Reports is its inherent capacity to convert NSE7_SOC_AR-7.6 those rows of raw data into valuable information, An insurance company scrutinizes actuarial tables before underwriting a policy.
Three Formats for Fortinet NSE7_SOC_AR-7.6 Exam QuestionsGet your Fortinet s I NSE7_SOC_AR-7.6 Dumps exam preparation questions and answers in form of NSE7_SOC_AR-7.6 PDF, The NSE7_SOC_AR-7.6 VCE dumps will be your personal think tank to help you master the important skills and knowledge.
The Fortinet NSE 7 - Security Operations 7.6 Architect valid exam practice will lead you to the certification and the way of high position brighter future, When you purchase our NSE7_SOC_AR-7.6 Fortinet NSE 7 - Security Operations 7.6 Architect study dumps, you will enjoy one year free update.
Come and choose our NSE7_SOC_AR-7.6 real exam.




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1