Firefly Open Source Community

Title: Pass Guaranteed Quiz Fortinet - FCSS_NST_SE-7.6 - Useful FCSS - Network Security [Print This Page]

Author: nathani238    Time: yesterday 00:39
Title: Pass Guaranteed Quiz Fortinet - FCSS_NST_SE-7.6 - Useful FCSS - Network Security
What's more, part of that PDFVCE FCSS_NST_SE-7.6 dumps now are free: https://drive.google.com/open?id=1L_jj6vz4pjMSAyzDcsgZBqZqtwV0gfqi
PDFVCE Fortinet FCSS_NST_SE-7.6 Exam Training materials can help you to come true your dreams. Because it contains all the questions of Fortinet FCSS_NST_SE-7.6 examination. With PDFVCE, you could throw yourself into the exam preparation completely. With high quality training materials by PDFVCE provided, you will certainly pass the exam. PDFVCE can give you a brighter future.
Fortinet FCSS_NST_SE-7.6 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Routing: This section focuses on Network Engineers and involves tackling issues related to packet routing using static routes, as well as OSPF and BGP protocols to support enterprise network traffic flow.
Topic 2
  • System troubleshooting: This section of the exam measures the skills of Network Security Support Engineers and addresses diagnosing and correcting issues within Security Fabric setups, automation stitches, resource utilization, general connectivity, and different operation modes in FortiGate HA clusters. Candidates work with built-in tools to effectively find and resolve faults.
Topic 3
  • Authentication: This section evaluates the abilities of System Administrators and requires troubleshooting both local and remote authentication methods, including resolving Fortinet Single Sign-On (FSSO) problems for secure network access.
Topic 4
  • VPN: This section is aimed at IT Professionals and includes diagnosing and addressing issues with IPsec VPNs, specifically IKE version 1 and 2, to secure remote and site-to-site connections within the network infrastructure.
Topic 5
  • Security profiles: This part measures skills of Security Operations Specialists and covers identifying and resolving problems linked to FortiGuard services, web filtering configurations, and intrusion prevention systems to maintain protection across network environments.

>> FCSS_NST_SE-7.6 Valid Exam Forum <<
FCSS_NST_SE-7.6 Cost Effective Dumps | Downloadable FCSS_NST_SE-7.6 PDFThe FCSS_NST_SE-7.6 mock tests are specially built for you to evaluate what you have studied. These FCSS - Network Security 7.6 Support Engineer (FCSS_NST_SE-7.6) practice exams (desktop and web-based) are customizable, which means that you can change the time and questions according to your needs. Our FCSS_NST_SE-7.6 Practice Tests teach you time management so you can pass the FCSS - Network Security 7.6 Support Engineer (FCSS_NST_SE-7.6) certification exam.
Fortinet FCSS - Network Security 7.6 Support Engineer Sample Questions (Q68-Q73):NEW QUESTION # 68
Refer to the exhibit, which shows the output of the command get router info bgp neighbors 100.64.2.254 advertised-routes.

What can you conclude from the output?
Answer: B

NEW QUESTION # 69
An administrator wants to capture encrypted phase 2 traffic between two FotiGate devices using the built-in sniffer.
If the administrator knows that there Is no NAT device located between both FortiGate devices, which command should the administrator run?
Answer: C
Explanation:
To capture encrypted IPsec phase 2 (ESP) traffic between two FortiGate devices, the correct protocol filter to use is ip proto 50. According to the Fortinet official sniffing and debugging documentation, ESP (Encapsulating Security Payload) is used for encrypted phase 2 payload transfer and always uses IP protocol number 50. Running the command diagnose sniffer packet any 'ip proto 50' captures only ESP packets, which represent the encrypted traffic-whether originating or transiting the device.
If there is no NAT device between FortiGates, ESP is not encapsulated in UDP (thus not on UDP port 4500; if NAT-T were required, packets would be UDP-encapsulated, but the scenario explicitly says NAT is not in use). UDP port 500 is for IKE control (negotiation) traffic, and AH (Authentication Header, ip proto 51) is not used for encryption in standard IPsec phase 2 with ESP.
This matches the official CLI reference from Fortinet for VPN and traffic analysis.
**
References:
FortiOS CLI Reference: diagnose sniffer packet, ESP, IP Protocol Numbers FortiGate VPN Administration Guide: Traffic Capture and Analysis of IPsec Traffic

NEW QUESTION # 70
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate?
(Choose two.)
Answer: C,D

NEW QUESTION # 71
Which exchange lakes care of DoS protection in IKEv2?
Answer: B

NEW QUESTION # 72
Refer to the exhibit, which shows the output of a policy route table entry.

Which type of policy route does the output show?
Answer: D
Explanation:
The exhibit for question 4 shows a policy route table entry, and key fields are as follows:
* internet service(1) : Fortinet-FortiGuard(1245324,0.0.0.0,0.0.0.0)
According to the Fortinet official documentation, when a policy route is based on Internet Service Database (ISDB) entries, the route entry will specifically mention "internet service," showing the service being referenced (in this example, Fortinet-FortiGuard). This is fundamentally different from a regular policy route, which is defined by source, destination, and service wildcards without referencing an ISDB signature. A regular policy route's output would not contain the line "internet service." Policy routes that use ISDB allow FortiGate to steer traffic for specific well-known services (like FortiGuard, Google, Microsoft) based on traffic pattern recognition, even if the destination IP is dynamic. The matching and route selection follow the ISDB tag and can coexist with static or regular policy routes.
Thus, this entry is correctly and uniquely an ISDB route, as explained in the FortiOS policy routing documentation and ISDB configuration references.
References:
FortiOS Administration Guide: Policy Routing, ISDB integration and interpretation of route table entries ISDB-based Routing and Official CLI Outputs in Fortinet's documentation

NEW QUESTION # 73
......
The FCSS_NST_SE-7.6 study guide provided by the PDFVCE is available, affordable, updated and of best quality to help you overcome difficulties in the actual test. We continue to update our dumps in accord with FCSS_NST_SE-7.6 real exam by checking the updated information every day. The contents of FCSS_NST_SE-7.6 Free Download Pdf will cover the 99% important points in your actual test. In case you fail on the first try of your exam with our FCSS_NST_SE-7.6 free practice torrent, we will give you a full refund on your purchase.
FCSS_NST_SE-7.6 Cost Effective Dumps: https://www.pdfvce.com/Fortinet/FCSS_NST_SE-7.6-exam-pdf-dumps.html
What's more, part of that PDFVCE FCSS_NST_SE-7.6 dumps now are free: https://drive.google.com/open?id=1L_jj6vz4pjMSAyzDcsgZBqZqtwV0gfqi





Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1