Need help with display setup

Alexander

Hello,

I have two displays, both have same resolution, it is 800 x 480.
One:
https://www.adafruit.com/product/2407
This can connect only via HDMI.
Second:
https://www.aliexpress.com/item/ ... MI/32297375551.html
This could be connected via HDMI or VGA using driver board.

I was flashing different firmware (MMC; Ubuntu only) for my Firefly-RK3288. I was trying to set up native (800 x 480) resolution, but no success.

1. Ubuntu-14.04_201512031755 (unmodified or with mainline kernel, no difference)
With this version I could see the desktop, but could not set resolution.
1.1 "xrandr" just could not set it. I was making all the steps described in here:
https://wiki.ubuntu.com/X/Config ... etected_resolutions
was constantly getting error "Failed to get size of gamma". I have ignored that message and when I was trying to set resolution to 800 x 480 screen was blinking and returned to 1680x1050.
1.2 was trying to modify xorg.conf, also without success. Maybe I just do not know the right parameters to put in. New resolutions just does not appears in widget.

2. Ubuntu_16.04_201608291523_beta
several days ago I flashed this image and another problem arised. Both displays shows nothing. Nor HDMI, nor VGA are working.
I am more interested in this (or newer) build because of improvements, so I will be happy if you can help me with setting the displays up under this firmware.
I can see the desktop if I connect Firefly to 19" display (that support FullHD), both VGA and HDMI are working, two FullHD monitors are supported. Ok, now I leave VGA cable connected to 19" display, and connect HDMI cable to my small 800x480 display. Result: small display shows nothing, big one is still working fine. If "Monitor" widget in Ubuntu was opened, it will crush and will not start again.

Any solution of this? Can anyone advise me on how to get image on my small displays with correct resolution?

isle

Hi
   try this : https://drive.google.com/open?id=0B7HO8lbGgAqARVZsOTNJVkxrakU

Alexander

Thank you, isle!
This build working fine with VGA output. DIsplay with VGA input was detected and correct resolution (800 x 480) was set automatically. What are the steps to make it work? Would be nice to know.

HDMI is not working


glmark2 score is 213.

isle

Hi
   Only  connet the HDMI  .and try this cmd to see what did you get  :
cat /var/log/Xorg.0.log

Alexander

Ok, I have followed the behavior using SSH.
When I do connect HDMI display "on the go" (after OS is loaded) I got this log:
<script src="//pastebin.com/embed_js/4xvuZhSP"></script>

If I boot up OS while HDMI is already connected, I am getting this one:
<script src="//pastebin.com/embed_js/D88iHatD"></script>

In both cases, display shows nothing.

isle

Hi
the log is missing.

Alexander

Hello, I was checking the links above and it was active...
Ok.  I will try to insert logs here.
When I do connect HDMI display "on the go" (after OS is loaded) I got this log:

1. [     7.879]
   
2. X.Org X Server 1.15.1
   
3. Release Date: 2014-04-13
   
4. [     7.879] X Protocol Version 11, Revision 0
   
5. [     7.879] Build Operating System: Linux 3.2.0-67-highbank armv7l Ubuntu
   
6. [     7.879] Current Operating System: Linux firefly 3.14.0 #129 SMP Mon Jun 6 15:15:00 CST 2016 armv7l
   
7. [     7.879] Kernel command line: earlyprintk=ttyS2,115200 console=tty0 console=ttyS2,115200 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 root=/dev/block/mtd/by-name/linuxroot linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00010000@0x00002000(boot),0x00002000@0x00012000(backup),-@0x00014000(linuxroot) storagemedia=emmc loader.timestamp=2015-01-21_16:36:44 androidboot.mode=emmc
   
8. [     7.879] Build Date: 12 February 2015  02:55:07PM
   
9. [     7.879] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
   
10. [     7.879] Current version of pixman: 0.30.2
    
11. [     7.879]    Before reporting problems, check http://wiki.x.org
    
12.     to make sure that you have the latest version.
    
13. [     7.879] Markers: (--) probed, (**) from config file, (==) default setting,
    
14.     (++) from command line, (!!) notice, (II) informational,
    
15.     (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    
16. [     7.879] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  1 08:00:07 1970
    
17. [     7.879] (==) Using config file: "/etc/X11/xorg.conf"
    
18. [     7.880] (==) Using config directory: "/etc/X11/xorg.conf.d"
    
19. [     7.880] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    
20. [     7.880] (==) ServerLayout "DefaultLayout"
    
21. [     7.880] (**) |-->Screen "DefaultScreen" (0)
    
22. [     7.880] (**) |   |-->Monitor "<default monitor>"
    
23. [     7.881] (**) |   |-->Device "Mali FBDEV"
    
24. [     7.881] (==) No monitor specified for screen "DefaultScreen".
    
25.     Using a default monitor configuration.
    
26. [     7.881] (**) Option "NoTrapSignals" "true"
    
27. [     7.881] (**) Option "DontZap" "false"
    
28. [     7.881] (**) Option "BlankTime" "0"
    
29. [     7.881] (**) Option "StandbyTime" "0"
    
30. [     7.881] (**) Option "SuspendTime" "0"
    
31. [     7.881] (**) Option "OffTime" "0"
    
32. [     7.881] (**) Option "IgnoreABI" "1"
    
33. [     7.881] (**) Ignoring ABI Version
    
34. [     7.881] (==) Automatically adding devices
    
35. [     7.881] (==) Automatically enabling devices
    
36. [     7.881] (==) Automatically adding GPU devices
    
37. [     7.881] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    
38. [     7.881]    Entry deleted from font path.
    
39. [     7.881] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    
40. [     7.881]    Entry deleted from font path.
    
41. [     7.881] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    
42. [     7.881]    Entry deleted from font path.
    
43. [     7.881] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
    
44. [     7.881]    Entry deleted from font path.
    
45. [     7.881] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    
46. [     7.881]    Entry deleted from font path.
    
47. [     7.881] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    
48. [     7.881]    Entry deleted from font path.
    
49. [     7.881] (==) FontPath set to:
    
50.     /usr/share/fonts/X11/misc,
    
51.     built-ins
    
52. [     7.881] (==) ModulePath set to "/usr/lib/arm-linux-gnueabihf/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    
53. [     7.881] (II) The server relies on udev to provide the list of input devices.
    
54.     If no devices become available, reconfigure udev or disable AutoAddDevices.
    
55. [     7.881] (II) Loader magic: 0xb6f93f10
    
56. [     7.881] (II) Module ABI versions:
    
57. [     7.881]    X.Org ANSI C Emulation: 0.4
    
58. [     7.881]    X.Org Video Driver: 15.0
    
59. [     7.881]    X.Org XInput driver : 20.0
    
60. [     7.881]    X.Org Server Extension : 8.0
    
61. [     7.882] (II) xfree86: Adding drm device (/dev/dri/card0)
    
62. [     7.882] Initializing built-in extension Generic Event Extension
    
63. [     7.882] Initializing built-in extension SHAPE
    
64. [     7.882] Initializing built-in extension MIT-SHM
    
65. [     7.882] Initializing built-in extension XInputExtension
    
66. [     7.882] Initializing built-in extension XTEST
    
67. [     7.882] Initializing built-in extension BIG-REQUESTS
    
68. [     7.882] Initializing built-in extension SYNC
    
69. [     7.882] Initializing built-in extension XKEYBOARD
    
70. [     7.882] Initializing built-in extension XC-MISC
    
71. [     7.882] Initializing built-in extension SECURITY
    
72. [     7.882] Initializing built-in extension XINERAMA
    
73. [     7.882] Initializing built-in extension XFIXES
    
74. [     7.882] Initializing built-in extension RENDER
    
75. [     7.882] Initializing built-in extension RANDR
    
76. [     7.882] Initializing built-in extension COMPOSITE
    
77. [     7.882] Initializing built-in extension DAMAGE
    
78. [     7.882] Initializing built-in extension MIT-SCREEN-SAVER
    
79. [     7.882] Initializing built-in extension DOUBLE-BUFFER
    
80. [     7.882] Initializing built-in extension RECORD
    
81. [     7.882] Initializing built-in extension DPMS
    
82. [     7.883] Initializing built-in extension Present
    
83. [     7.883] Initializing built-in extension DRI3
    
84. [     7.883] Initializing built-in extension X-Resource
    
85. [     7.883] Initializing built-in extension XVideo
    
86. [     7.883] Initializing built-in extension XVideo-MotionCompensation
    
87. [     7.883] Initializing built-in extension SELinux
    
88. [     7.883] Initializing built-in extension XFree86-VidModeExtension
    
89. [     7.883] Initializing built-in extension XFree86-DGA
    
90. [     7.883] Initializing built-in extension XFree86-DRI
    
91. [     7.883] Initializing built-in extension DRI2
    
92. [     7.883] (II) LoadModule: "glx"
    
93. [     7.886] (WW) Warning, couldn\'t open module glx
    
94. [     7.886] (II) UnloadModule: "glx"
    
95. [     7.886] (II) Unloading glx
    
96. [     7.886] (EE) Failed to load module "glx" (module does not exist, 0)
    
97. [     7.886] (II) LoadModule: "armsoc"
    
98. [     7.887] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so
    
99. [     7.888] (II) Module armsoc: vendor="X.Org Foundation"
    
100. [     7.888]    compiled for 1.15.1, module version = 0.0.1
     
101. [     7.888]    Module class: X.Org Video Driver
     
102. [     7.888]    ABI class: X.Org Video Driver, version 15.0
     
103. [     7.888] (II) ARMSOC: Driver for TI OMAP: exynos5
     
104. [     7.888] (++) using VT number 7
     
105. 
     
106. [     7.893] (WW) Falling back to old probe method for armsoc
     
107. [     7.893] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
     
108. [     7.893] (II) ARMSOC(0): Creating default Display subsection in Screen section
     
109.     "DefaultScreen" for depth/fbbpp 24/32
     
110. [     7.893] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32
     
111. [     7.893] (==) ARMSOC(0): RGB weight 888
     
112. [     7.893] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0)
     
113. [     7.893] (==) ARMSOC(0): Default visual is TrueColor
     
114. [     7.894] (II) ARMSOC(0): Chipset: exynos5
     
115. [     7.894] (II) ARMSOC(0): Setting the video modes ...
     
116. [     7.894] (II) ARMSOC(0): [CRTC:21] HW Cursor using [BO:1]
     
117. [     7.894] (II) ARMSOC(0): [CRTC:26] HW Cursor using [BO:2]
     
118. [     7.894] (II) ARMSOC(0): Output HDMI-1 has no monitor section
     
119. [     7.895] (II) ARMSOC(0): Output VGA-1 has no monitor section
     
120. [     7.895] (II) ARMSOC(0): EDID for output HDMI-1
     
121. [     7.896] (II) ARMSOC(0): EDID for output VGA-1
     
122. [     7.896] (II) ARMSOC(0): Output HDMI-1 disconnected
     
123. [     7.896] (II) ARMSOC(0): Output VGA-1 disconnected
     
124. [     7.896] (WW) ARMSOC(0): No outputs definitely connected, trying again...
     
125. [     7.896] (II) ARMSOC(0): Output HDMI-1 disconnected
     
126. [     7.896] (II) ARMSOC(0): Output VGA-1 disconnected
     
127. [     7.896] (WW) ARMSOC(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
     
128. [     7.896] (II) ARMSOC(0): Got KMS resources
     
129. [     7.896] (==) ARMSOC(0): DPI set to (96, 96)
     
130. [     7.896] (II) Loading sub module "dri2"
     
131. [     7.896] (II) LoadModule: "dri2"
     
132. [     7.896] (II) Module "dri2" already built-in
     
133. [     7.896] (II) Loading sub module "exa"
     
134. [     7.896] (II) LoadModule: "exa"
     
135. [     7.896] (II) Loading /usr/lib/xorg/modules/libexa.so
     
136. [     7.897] (II) Module exa: vendor="X.Org Foundation"
     
137. [     7.897]    compiled for 1.15.1, module version = 2.6.0
     
138. [     7.897]    ABI class: X.Org Video Driver, version 15.0
     
139. [     7.897] (II) Loading sub module "fb"
     
140. [     7.897] (II) LoadModule: "fb"
     
141. [     7.897] (II) Loading /usr/lib/xorg/modules/libfb.so
     
142. [     7.897] (II) Module fb: vendor="X.Org Foundation"
     
143. [     7.897]    compiled for 1.15.1, module version = 1.0.0
     
144. [     7.897]    ABI class: X.Org ANSI C Emulation, version 0.4
     
145. [     7.897] (--) Depth 24 pixmap format is 32 bpp
     
146. [     7.922] (II) ARMSOC(0): Initialized a depth-32 visual for XRGB8888
     
147. [     7.922] (II) ARMSOC(0): Soft EXA mode
     
148. [     7.923] (II) EXA(0): Driver allocated offscreen pixmaps
     
149. [     7.923] (II) EXA(0): Driver registered support for the following operations:
     
150. [     7.923] (II)         Solid
     
151. [     7.923] (II)         Copy
     
152. [     7.923] (II)         Composite (RENDER acceleration)
     
153. [     7.923] (II) ARMSOC(0): [DRI2] Setup complete
     
154. [     7.923] (II) ARMSOC(0): [DRI2]   DRI driver: armsoc
     
155. [     7.923] (==) ARMSOC(0): Backing store enabled
     
156. [     7.923] (==) ARMSOC(0): Silken mouse enabled
     
157. [     7.923] (II) ARMSOC(0): RandR 1.2 enabled, ignore the following RandR disabled message.
     
158. [     7.923] (==) ARMSOC(0): DPMS enabled
     
159. [     7.923] (--) RandR disabled
     
160. [     7.937] (II) SELinux: Disabled on system
     
161. [     7.987] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
     
162. [     7.992] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/display-subsystem.4/drm/card0
     
163. [     7.992] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
     
164. [     7.993] (II) config/udev: Adding input device gpio_ir_recv (/dev/input/event0)
     
165. [     7.993] (**) gpio_ir_recv: Applying InputClass "evdev keyboard catchall"
     
166. [     7.993] (II) LoadModule: "evdev"
     
167. [     7.993] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
     
168. [     7.996] (II) Module evdev: vendor="X.Org Foundation"
     
169. [     7.996]    compiled for 1.15.0, module version = 2.8.2
     
170. [     7.996]    Module class: X.Org XInput Driver
     
171. [     7.996]    ABI class: X.Org XInput driver, version 20.0
     
172. [     7.996] (II) Using input driver \'evdev\' for \'gpio_ir_recv\'
     
173. [     7.996] (**) gpio_ir_recv: always reports core events
     
174. [     7.996] (**) evdev: gpio_ir_recv: Device: "/dev/input/event0"
     
175. [     7.996] (--) evdev: gpio_ir_recv: Vendor 0x1 Product 0x1
     
176. [     7.996] (--) evdev: gpio_ir_recv: Found keys
     
177. [     7.996] (II) evdev: gpio_ir_recv: Configuring as keyboard
     
178. [     7.996] (**) Option "config_info" "udev:/sys/devices/gpio-ir-receiver.13/rc/rc0/input0/event0"
     
179. [     7.996] (II) XINPUT: Adding extended input device "gpio_ir_recv" (type: KEYBOARD, id 6)
     
180. [     7.996] (**) Option "xkb_rules" "evdev"
     
181. [     7.996] (**) Option "xkb_model" "pc105"
     
182. [     7.996] (**) Option "xkb_layout" "us"
     
183. [     7.997] (II) config/udev: Adding input device gpio-keys.12 (/dev/input/event3)
     
184. [     7.997] (**) gpio-keys.12: Applying InputClass "evdev keyboard catchall"
     
185. [     7.997] (II) Using input driver \'evdev\' for \'gpio-keys.12\'
     
186. [     7.997] (**) gpio-keys.12: always reports core events
     
187. [     7.997] (**) evdev: gpio-keys.12: Device: "/dev/input/event3"
     
188. [     7.997] (--) evdev: gpio-keys.12: Vendor 0x1 Product 0x1
     
189. [     7.997] (--) evdev: gpio-keys.12: Found keys
     
190. [     7.997] (II) evdev: gpio-keys.12: Configuring as keyboard
     
191. [     7.997] (**) Option "config_info" "udev:/sys/devices/gpio-keys.12/input/input3/event3"
     
192. [     7.997] (II) XINPUT: Adding extended input device "gpio-keys.12" (type: KEYBOARD, id 7)
     
193. [     7.997] (**) Option "xkb_rules" "evdev"
     
194. [     7.997] (**) Option "xkb_model" "pc105"
     
195. [     7.997] (**) Option "xkb_layout" "us"
     
196. [     7.998] (II) config/udev: Adding input device RockchipHDMI HDMI Jack (/dev/input/event2)
     
197. [     7.998] (II) No input driver specified, ignoring this device.
     
198. [     7.998] (II) This device may have been added with another device file.
     
199. [     7.999] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (gpio-rc-recv) (/dev/input/event1)
     
200. [     7.999] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): Applying InputClass "evdev pointer catchall"
     
201. [     7.999] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): Applying InputClass "evdev keyboard catchall"
     
202. [     7.999] (II) Using input driver \'evdev\' for \'MCE IR Keyboard/Mouse (gpio-rc-recv)\'
     
203. [     7.999] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): always reports core events
     
204. [     7.999] (**) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Device: "/dev/input/event1"
     
205. [     7.999] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Vendor 0 Product 0
     
206. [     7.999] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found 3 mouse buttons
     
207. [     7.999] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found relative axes
     
208. [     7.999] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found x and y relative axes
     
209. [     7.999] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found keys
     
210. [     7.999] (II) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Configuring as mouse
     
211. [     7.999] (II) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Configuring as keyboard
     
212. [     7.999] (**) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): YAxisMapping: buttons 4 and 5
     
213. [     7.999] (**) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
     
214. [     7.999] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
     
215. [     7.999] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (gpio-rc-recv)" (type: KEYBOARD, id 8)
     
216. [     7.999] (**) Option "xkb_rules" "evdev"
     
217. [     7.999] (**) Option "xkb_model" "pc105"
     
218. [     7.999] (**) Option "xkb_layout" "us"
     
219. [     8.000] (II) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): initialized for relative axes.
     
220. [     8.000] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) keeping acceleration scheme 1
     
221. [     8.000] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) acceleration profile 0
     
222. [     8.000] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) acceleration factor: 2.000
     
223. [     8.000] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) acceleration threshold: 4
     
224. [   171.238] (II) ARMSOC(0): hotplug=1, match=1
     
225. [   171.520] (II) ARMSOC(0): EDID vendor "RKC", prod id 17480
     
226. [   171.520] (II) ARMSOC(0): DDCModeFromDetailedTiming: Ignoring: We don\'t handle stereo.
     
227. [   171.521] (II) ARMSOC(0): Printing DDC gathered Modelines:
     
228. [   171.521] (II) ARMSOC(0): Modeline "472x295"x82.0   14.85  472 480 528 584  295 296 299 310 -hsync +vsync (25.4 kHz e)
     
229. [   171.521] (II) ARMSOC(0): Modeline "504x378"x84.0   21.07  504 520 568 632  378 379 382 397 -hsync +vsync (33.3 kHz e)
     
230. [   171.521] (II) ARMSOC(0): Modeline "600x375"x97.0   29.88  600 624 688 776  375 376 379 397 -hsync +vsync (38.5 kHz e)
     
231. [   171.521] (II) ARMSOC(0): Modeline "248x139"x64.0    2.30  248 232 248 248  139 140 143 145 -hsync +vsync (9.3 kHz e)
     
232. [   171.521] (II) ARMSOC(0): Modeline "1384x865"x93.0  159.63  1384 1480 1632 1880  865 866 869 913 -hsync +vsync (84.9 kHz e)
     
233. [   171.521] (II) ARMSOC(0): Modeline "248x2040"x1275.0  3135.89  248 272 304 360  2040 2041 2044 6832 -hsync +vsync (8710.8 kHz e)
     
234. [   171.521] (II) ARMSOC(0): Modeline "11744x376"x235.0  1637.85  11744 12632 13920 16096  376 377 380 433 -hsync +vsync (101.8 kHz e)
     
235. [   171.521] (II) ARMSOC(0): Modeline "4112x744"x465.0  2710.87  4112 4504 4968 5824  744 745 748 1001 -hsync +vsync (465.5 kHz e)
     
236. [   171.521] (II) ARMSOC(0): Modeline "2040x1275"x105.0  401.49  2040 2208 2432 2824  1275 1276 1279 1354 -hsync +vsync (142.2 kHz e)
     
237. [   171.521] (II) ARMSOC(0): Modeline "376x235"x76.0    8.23  376 376 408 440  235 236 239 246 -hsync +vsync (18.7 kHz e)
     
238. [   171.521] (II) ARMSOC(0): Modeline "744x465"x62.0   27.97  744 768 840 936  465 466 469 482 -hsync +vsync (29.9 kHz e)
     
239. [   171.521] (II) ARMSOC(0): Modeline "248x155"x79.0    3.40  248 232 256 264  155 156 159 163 -hsync +vsync (12.9 kHz e)
     
240. [   171.521] (II) ARMSOC(0): Modeline "0x5"x522.0    0.00  0 0 0 0  5 6 9 8 -hsync +vsync (4.2 kHz e)
     
241. [   171.521] (II) ARMSOC(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
     
242. [   171.521] (II) ARMSOC(0): Modeline "640x480"x0.0   25.18  640 648 744 800  480 482 484 525 -hsync -vsync (31.5 kHz e)
     
243. [   171.521] (II) ARMSOC(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
     
244. [   171.521] (II) ARMSOC(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
     
245. [   171.521] (II) ARMSOC(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
     
246. [   171.521] (II) ARMSOC(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
     
247. [   171.521] (WW) ARMSOC(0): Output HDMI-1: Strange aspect ratio (522/32), consider adding a quirk
     
248. [   171.521] (II) ARMSOC(0): EDID vendor "RKC", prod id 17480
     
249. [   171.521] (II) ARMSOC(0): DDCModeFromDetailedTiming: Ignoring: We don\'t handle stereo.
     
250. [   171.521] (II) ARMSOC(0): Printing DDC gathered Modelines:
     
251. [   171.521] (II) ARMSOC(0): Modeline "472x295"x82.0   14.85  472 480 528 584  295 296 299 310 -hsync +vsync (25.4 kHz e)
     
252. [   171.521] (II) ARMSOC(0): Modeline "504x378"x84.0   21.07  504 520 568 632  378 379 382 397 -hsync +vsync (33.3 kHz e)
     
253. [   171.521] (II) ARMSOC(0): Modeline "600x375"x97.0   29.88  600 624 688 776  375 376 379 397 -hsync +vsync (38.5 kHz e)
     
254. [   171.521] (II) ARMSOC(0): Modeline "248x139"x64.0    2.30  248 232 248 248  139 140 143 145 -hsync +vsync (9.3 kHz e)
     
255. [   171.521] (II) ARMSOC(0): Modeline "1384x865"x93.0  159.63  1384 1480 1632 1880  865 866 869 913 -hsync +vsync (84.9 kHz e)
     
256. [   171.521] (II) ARMSOC(0): Modeline "248x2040"x1275.0  3135.89  248 272 304 360  2040 2041 2044 6832 -hsync +vsync (8710.8 kHz e)
     
257. [   171.521] (II) ARMSOC(0): Modeline "11744x376"x235.0  1637.85  11744 12632 13920 16096  376 377 380 433 -hsync +vsync (101.8 kHz e)
     
258. [   171.521] (II) ARMSOC(0): Modeline "4112x744"x465.0  2710.87  4112 4504 4968 5824  744 745 748 1001 -hsync +vsync (465.5 kHz e)
     
259. [   171.521] (II) ARMSOC(0): Modeline "2040x1275"x105.0  401.49  2040 2208 2432 2824  1275 1276 1279 1354 -hsync +vsync (142.2 kHz e)
     
260. [   171.521] (II) ARMSOC(0): Modeline "376x235"x76.0    8.23  376 376 408 440  235 236 239 246 -hsync +vsync (18.7 kHz e)
     
261. [   171.522] (II) ARMSOC(0): Modeline "744x465"x62.0   27.97  744 768 840 936  465 466 469 482 -hsync +vsync (29.9 kHz e)
     
262. [   171.522] (II) ARMSOC(0): Modeline "248x155"x79.0    3.40  248 232 256 264  155 156 159 163 -hsync +vsync (12.9 kHz e)
     
263. [   171.522] (II) ARMSOC(0): Modeline "0x5"x522.0    0.00  0 0 0 0  5 6 9 8 -hsync +vsync (4.2 kHz e)
     
264. [   171.522] (II) ARMSOC(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
     
265. [   171.522] (II) ARMSOC(0): Modeline "640x480"x0.0   25.18  640 648 744 800  480 482 484 525 -hsync -vsync (31.5 kHz e)
     
266. [   171.522] (II) ARMSOC(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
     
267. [   171.522] (II) ARMSOC(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
     
268. [   171.522] (II) ARMSOC(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
     
269. 
     
270. [   171.522] (II) ARMSOC(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
     

Copy the code

If I boot up OS while HDMI is already connected, I am getting this one:

1. [     9.421]
   
2. X.Org X Server 1.15.1
   
3. Release Date: 2014-04-13
   
4. [     9.421] X Protocol Version 11, Revision 0
   
5. [     9.421] Build Operating System: Linux 3.2.0-67-highbank armv7l Ubuntu
   
6. [     9.421] Current Operating System: Linux firefly 3.14.0 #129 SMP Mon Jun 6 15:15:00 CST 2016 armv7l
   
7. [     9.421] Kernel command line: earlyprintk=ttyS2,115200 console=tty0 console=ttyS2,115200 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 root=/dev/block/mtd/by-name/linuxroot linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00010000@0x00002000(boot),0x00002000@0x00012000(backup),-@0x00014000(linuxroot) storagemedia=emmc loader.timestamp=2015-01-21_16:36:44 androidboot.mode=emmc
   
8. [     9.421] Build Date: 12 February 2015  02:55:07PM
   
9. [     9.421] xorg-server 2:1.15.1-0ubuntu2.7 (For technical support please see http://www.ubuntu.com/support)
   
10. [     9.421] Current version of pixman: 0.30.2
    
11. [     9.421]    Before reporting problems, check http://wiki.x.org
    
12.     to make sure that you have the latest version.
    
13. [     9.421] Markers: (--) probed, (**) from config file, (==) default setting,
    
14.     (++) from command line, (!!) notice, (II) informational,
    
15.     (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    
16. [     9.421] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  1 08:00:09 1970
    
17. [     9.422] (==) Using config file: "/etc/X11/xorg.conf"
    
18. [     9.422] (==) Using config directory: "/etc/X11/xorg.conf.d"
    
19. [     9.422] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    
20. [     9.422] (==) ServerLayout "DefaultLayout"
    
21. [     9.422] (**) |-->Screen "DefaultScreen" (0)
    
22. [     9.422] (**) |   |-->Monitor "<default monitor>"
    
23. [     9.423] (**) |   |-->Device "Mali FBDEV"
    
24. [     9.423] (==) No monitor specified for screen "DefaultScreen".
    
25.     Using a default monitor configuration.
    
26. [     9.423] (**) Option "NoTrapSignals" "true"
    
27. [     9.423] (**) Option "DontZap" "false"
    
28. [     9.423] (**) Option "BlankTime" "0"
    
29. [     9.423] (**) Option "StandbyTime" "0"
    
30. [     9.423] (**) Option "SuspendTime" "0"
    
31. [     9.423] (**) Option "OffTime" "0"
    
32. [     9.423] (**) Option "IgnoreABI" "1"
    
33. [     9.423] (**) Ignoring ABI Version
    
34. [     9.423] (==) Automatically adding devices
    
35. [     9.423] (==) Automatically enabling devices
    
36. [     9.423] (==) Automatically adding GPU devices
    
37. [     9.423] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    
38. [     9.423]    Entry deleted from font path.
    
39. [     9.423] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    
40. [     9.423]    Entry deleted from font path.
    
41. [     9.423] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    
42. [     9.423]    Entry deleted from font path.
    
43. [     9.423] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
    
44. [     9.423]    Entry deleted from font path.
    
45. [     9.423] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    
46. [     9.423]    Entry deleted from font path.
    
47. [     9.423] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    
48. [     9.423]    Entry deleted from font path.
    
49. [     9.423] (==) FontPath set to:
    
50.     /usr/share/fonts/X11/misc,
    
51.     built-ins
    
52. [     9.423] (==) ModulePath set to "/usr/lib/arm-linux-gnueabihf/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    
53. [     9.423] (II) The server relies on udev to provide the list of input devices.
    
54.     If no devices become available, reconfigure udev or disable AutoAddDevices.
    
55. [     9.423] (II) Loader magic: 0xb6f6af10
    
56. [     9.423] (II) Module ABI versions:
    
57. [     9.423]    X.Org ANSI C Emulation: 0.4
    
58. [     9.423]    X.Org Video Driver: 15.0
    
59. [     9.423]    X.Org XInput driver : 20.0
    
60. [     9.423]    X.Org Server Extension : 8.0
    
61. [     9.424] (II) xfree86: Adding drm device (/dev/dri/card0)
    
62. [     9.424] Initializing built-in extension Generic Event Extension
    
63. [     9.424] Initializing built-in extension SHAPE
    
64. [     9.424] Initializing built-in extension MIT-SHM
    
65. [     9.424] Initializing built-in extension XInputExtension
    
66. [     9.424] Initializing built-in extension XTEST
    
67. [     9.424] Initializing built-in extension BIG-REQUESTS
    
68. [     9.424] Initializing built-in extension SYNC
    
69. [     9.424] Initializing built-in extension XKEYBOARD
    
70. [     9.424] Initializing built-in extension XC-MISC
    
71. [     9.424] Initializing built-in extension SECURITY
    
72. [     9.424] Initializing built-in extension XINERAMA
    
73. [     9.424] Initializing built-in extension XFIXES
    
74. [     9.424] Initializing built-in extension RENDER
    
75. [     9.424] Initializing built-in extension RANDR
    
76. [     9.424] Initializing built-in extension COMPOSITE
    
77. [     9.424] Initializing built-in extension DAMAGE
    
78. [     9.424] Initializing built-in extension MIT-SCREEN-SAVER
    
79. [     9.424] Initializing built-in extension DOUBLE-BUFFER
    
80. [     9.424] Initializing built-in extension RECORD
    
81. [     9.424] Initializing built-in extension DPMS
    
82. [     9.424] Initializing built-in extension Present
    
83. [     9.424] Initializing built-in extension DRI3
    
84. [     9.424] Initializing built-in extension X-Resource
    
85. [     9.424] Initializing built-in extension XVideo
    
86. [     9.424] Initializing built-in extension XVideo-MotionCompensation
    
87. [     9.424] Initializing built-in extension SELinux
    
88. [     9.424] Initializing built-in extension XFree86-VidModeExtension
    
89. [     9.425] Initializing built-in extension XFree86-DGA
    
90. [     9.425] Initializing built-in extension XFree86-DRI
    
91. [     9.425] Initializing built-in extension DRI2
    
92. [     9.425] (II) LoadModule: "glx"
    
93. [     9.428] (WW) Warning, couldn\'t open module glx
    
94. [     9.428] (II) UnloadModule: "glx"
    
95. [     9.428] (II) Unloading glx
    
96. [     9.428] (EE) Failed to load module "glx" (module does not exist, 0)
    
97. [     9.428] (II) LoadModule: "armsoc"
    
98. [     9.429] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so
    
99. [     9.430] (II) Module armsoc: vendor="X.Org Foundation"
    
100. [     9.430]    compiled for 1.15.1, module version = 0.0.1
     
101. [     9.430]    Module class: X.Org Video Driver
     
102. [     9.430]    ABI class: X.Org Video Driver, version 15.0
     
103. [     9.430] (II) ARMSOC: Driver for TI OMAP: exynos5
     
104. [     9.430] (++) using VT number 7
     
105. 
     
106. [     9.436] (WW) Falling back to old probe method for armsoc
     
107. [     9.436] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
     
108. [     9.436] (II) ARMSOC(0): Creating default Display subsection in Screen section
     
109.     "DefaultScreen" for depth/fbbpp 24/32
     
110. [     9.436] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32
     
111. [     9.436] (==) ARMSOC(0): RGB weight 888
     
112. [     9.436] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0)
     
113. [     9.436] (==) ARMSOC(0): Default visual is TrueColor
     
114. [     9.436] (II) ARMSOC(0): Chipset: exynos5
     
115. [     9.436] (II) ARMSOC(0): Setting the video modes ...
     
116. [     9.436] (II) ARMSOC(0): [CRTC:21] HW Cursor using [BO:1]
     
117. [     9.436] (II) ARMSOC(0): [CRTC:26] HW Cursor using [BO:2]
     
118. [     9.437] (II) ARMSOC(0): Output HDMI-1 has no monitor section
     
119. [     9.438] (II) ARMSOC(0): Output VGA-1 has no monitor section
     
120. [     9.439] (II) ARMSOC(0): EDID for output HDMI-1
     
121. [     9.439] (II) ARMSOC(0): Manufacturer: RKC  Model: 4448  Serial#: 1
     
122. [     9.439] (II) ARMSOC(0): Year: 2004  Week: 20
     
123. [     9.439] (II) ARMSOC(0): EDID Version: 1.3
     
124. [     9.439] (II) ARMSOC(0): Digital Display Input
     
125. [     9.439] (II) ARMSOC(0): Max Image Size [cm]: horiz.: 80  vert.: 45
     
126. [     9.439] (II) ARMSOC(0): Gamma: 2.20
     
127. [     9.439] (II) ARMSOC(0): No DPMS capabilities specified
     
128. [     9.439] (II) ARMSOC(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
     
129. [     9.439] (II) ARMSOC(0): First detailed timing is preferred mode
     
130. [     9.439] (II) ARMSOC(0): redX: 0.625 redY: 0.340   greenX: 0.280 greenY: 0.595
     
131. [     9.439] (II) ARMSOC(0): blueX: 0.155 blueY: 0.070   whiteX: 0.283 whiteY: 0.298
     
132. [     9.439] (II) ARMSOC(0): Manufacturer\'s mask: 0
     
133. [     9.439] (II) ARMSOC(0): #0: hsize: 472  vsize 295  refresh: 82  vid: 5660
     
134. [     9.439] (II) ARMSOC(0): #0: hsize: 504  vsize 378  refresh: 84  vid: 22560
     
135. [     9.439] (II) ARMSOC(0): #0: hsize: 600  vsize 375  refresh: 97  vid: 9516
     
136. [     9.439] (II) ARMSOC(0): #0: hsize: 248  vsize 139  refresh: 64  vid: 50176
     
137. [     9.439] (II) ARMSOC(0): #0: hsize: 1384  vsize 865  refresh: 93  vid: 8590
     
138. [     9.439] (II) ARMSOC(0): #1: hsize: 2040  vsize 1275  refresh: 105  vid: 11744
     
139. [     9.439] (II) ARMSOC(0): #1: hsize: 376  vsize 235  refresh: 76  vid: 4112
     
140. [     9.439] (II) ARMSOC(0): #1: hsize: 744  vsize 465  refresh: 62  vid: 574
     
141. [     9.439] (II) ARMSOC(0): #1: hsize: 248  vsize 155  refresh: 79  vid: 4864
     
142. [     9.439] (II) ARMSOC(0): #1: hsize: 1384  vsize 865  refresh: 93  vid: 8590
     
143. [     9.439] (II) ARMSOC(0): Supported detailed timing:
     
144. [     9.439] (II) ARMSOC(0): clock: 74.2 MHz   Image Size:  522 x 32 mm
     
145. [     9.439] (II) ARMSOC(0): h_active: 1280  h_sync: 1280  h_sync_end 1320 h_blank_end 1650 h_border: 32
     
146. [     9.440] (II) ARMSOC(0): v_active: 720  v_sync: 724  v_sync_end 729 v_blanking: 750 v_border: 32
     
147. [     9.440] (II) ARMSOC(0): Stereo: left channel on sync
     
148. [     9.440] side-by-side interleaved(II) ARMSOC(0): Monitor name: GENERIC
     
149. [     9.440] (II) ARMSOC(0): Supported detailed timing:
     
150. [     9.440] (II) ARMSOC(0): clock: 74.2 MHz   Image Size:  708 x 398 mm
     
151. [     9.440] (II) ARMSOC(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
     
152. [     9.440] (II) ARMSOC(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
     
153. [     9.440] (II) ARMSOC(0): Supported detailed timing:
     
154. [     9.440] (II) ARMSOC(0): clock: 25.2 MHz   Image Size:  530 x 398 mm
     
155. [     9.440] (II) ARMSOC(0): h_active: 640  h_sync: 648  h_sync_end 744 h_blank_end 800 h_border: 8
     
156. [     9.440] (II) ARMSOC(0): v_active: 480  v_sync: 482  v_sync_end 484 v_blanking: 525 v_border: 8
     
157. [     9.440] (II) ARMSOC(0): Supported detailed timing:
     
158. [     9.440] (II) ARMSOC(0): clock: 27.0 MHz   Image Size:  531 x 398 mm
     
159. [     9.440] (II) ARMSOC(0): h_active: 1440  h_sync: 1478  h_sync_end 1602 h_blank_end 1716 h_border: 0
     
160. [     9.440] (II) ARMSOC(0): v_active: 240  v_sync: 244  v_sync_end 247 v_blanking: 262 v_border: 0
     
161. [     9.440] (II) ARMSOC(0): Supported detailed timing:
     
162. [     9.440] (II) ARMSOC(0): clock: 148.5 MHz   Image Size:  708 x 398 mm
     
163. [     9.440] (II) ARMSOC(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
     
164. [     9.441] (II) ARMSOC(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
     
165. [     9.441] (II) ARMSOC(0): Number of EDID sections to follow: 1
     
166. [     9.441] (II) ARMSOC(0): EDID (in hex):
     
167. [     9.441] (II) ARMSOC(0):    00ffffffffffff004963484401000000
     
168. [     9.441] (II) ARMSOC(0):    140e010380502d780a0dc9a057479827
     
169. [     9.441] (II) ARMSOC(0):    12484c00000001010101010101010101
     
170. [     9.441] (II) ARMSOC(0):    010101010101000000fa001c1620582c
     
171. [     9.441] (II) ARMSOC(0):    2500c48e2100000a000000fa00e02d10
     
172. [     9.441] (II) ARMSOC(0):    103e0200138e2100000a011d007251d0
     
173. [     9.441] (II) ARMSOC(0):    1e20002845000a2020202020000000fc
     
174. [     9.441] (II) ARMSOC(0):    0047454e455249430a20202020200150
     
175. [     9.441] (WW) ARMSOC(0): Output HDMI-1: Strange aspect ratio (522/32), consider adding a quirk
     
176. [     9.441] (II) ARMSOC(0): EDID vendor "RKC", prod id 17480
     
177. [     9.441] (II) ARMSOC(0): DDCModeFromDetailedTiming: Ignoring: We don\'t handle stereo.
     
178. [     9.441] (II) ARMSOC(0): Printing DDC gathered Modelines:
     
179. [     9.441] (II) ARMSOC(0): Modeline "472x295"x82.0   14.85  472 480 528 584  295 296 299 310 -hsync +vsync (25.4 kHz e)
     
180. [     9.441] (II) ARMSOC(0): Modeline "504x378"x84.0   21.07  504 520 568 632  378 379 382 397 -hsync +vsync (33.3 kHz e)
     
181. [     9.442] (II) ARMSOC(0): Modeline "600x375"x97.0   29.88  600 624 688 776  375 376 379 397 -hsync +vsync (38.5 kHz e)
     
182. [     9.442] (II) ARMSOC(0): Modeline "248x139"x64.0    2.30  248 232 248 248  139 140 143 145 -hsync +vsync (9.3 kHz e)
     
183. [     9.442] (II) ARMSOC(0): Modeline "1384x865"x93.0  159.63  1384 1480 1632 1880  865 866 869 913 -hsync +vsync (84.9 kHz e)
     
184. [     9.442] (II) ARMSOC(0): Modeline "248x2040"x1275.0  3135.89  248 272 304 360  2040 2041 2044 6832 -hsync +vsync (8710.8 kHz e)
     
185. [     9.442] (II) ARMSOC(0): Modeline "11744x376"x235.0  1637.85  11744 12632 13920 16096  376 377 380 433 -hsync +vsync (101.8 kHz e)
     
186. [     9.442] (II) ARMSOC(0): Modeline "4112x744"x465.0  2710.87  4112 4504 4968 5824  744 745 748 1001 -hsync +vsync (465.5 kHz e)
     
187. [     9.442] (II) ARMSOC(0): Modeline "2040x1275"x105.0  401.49  2040 2208 2432 2824  1275 1276 1279 1354 -hsync +vsync (142.2 kHz e)
     
188. [     9.442] (II) ARMSOC(0): Modeline "376x235"x76.0    8.23  376 376 408 440  235 236 239 246 -hsync +vsync (18.7 kHz e)
     
189. [     9.442] (II) ARMSOC(0): Modeline "744x465"x62.0   27.97  744 768 840 936  465 466 469 482 -hsync +vsync (29.9 kHz e)
     
190. [     9.442] (II) ARMSOC(0): Modeline "248x155"x79.0    3.40  248 232 256 264  155 156 159 163 -hsync +vsync (12.9 kHz e)
     
191. [     9.442] (II) ARMSOC(0): Modeline "0x5"x522.0    0.00  0 0 0 0  5 6 9 8 -hsync +vsync (4.2 kHz e)
     
192. [     9.442] (II) ARMSOC(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
     
193. [     9.442] (II) ARMSOC(0): Modeline "640x480"x0.0   25.18  640 648 744 800  480 482 484 525 -hsync -vsync (31.5 kHz e)
     
194. [     9.442] (II) ARMSOC(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
     
195. [     9.442] (II) ARMSOC(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
     
196. [     9.442] (II) ARMSOC(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
     
197. [     9.442] (II) ARMSOC(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
     
198. [     9.442] (II) ARMSOC(0): Printing probed modes for output HDMI-1
     
199. [     9.442] (II) ARMSOC(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz eP)
     
200. [     9.442] (II) ARMSOC(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
     
201. [     9.442] (II) ARMSOC(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
     
202. [     9.442] (II) ARMSOC(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
     
203. [     9.442] (II) ARMSOC(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
     
204. [     9.442] (II) ARMSOC(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
     
205. [     9.442] (II) ARMSOC(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
     
206. [     9.442] (II) ARMSOC(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 -hsync -vsync (31.5 kHz e)
     
207. [     9.442] (II) ARMSOC(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
     
208. [     9.443] (II) ARMSOC(0): EDID for output VGA-1
     
209. [     9.443] (II) ARMSOC(0): Output HDMI-1 connected
     
210. [     9.443] (II) ARMSOC(0): Output VGA-1 disconnected
     
211. [     9.443] (II) ARMSOC(0): Using exact sizes for initial modes
     
212. [     9.443] (II) ARMSOC(0): Output HDMI-1 using initial mode 1280x720
     
213. [     9.443] (II) ARMSOC(0): Got KMS resources
     
214. [     9.443] (**) ARMSOC(0): Display dimensions: (800, 450) mm
     
215. [     9.443] (**) ARMSOC(0): DPI set to (40, 40)
     
216. [     9.443] (II) Loading sub module "dri2"
     
217. [     9.443] (II) LoadModule: "dri2"
     
218. [     9.443] (II) Module "dri2" already built-in
     
219. [     9.443] (II) Loading sub module "exa"
     
220. [     9.443] (II) LoadModule: "exa"
     
221. [     9.444] (II) Loading /usr/lib/xorg/modules/libexa.so
     
222. [     9.444] (II) Module exa: vendor="X.Org Foundation"
     
223. [     9.444]    compiled for 1.15.1, module version = 2.6.0
     
224. [     9.444]    ABI class: X.Org Video Driver, version 15.0
     
225. [     9.444] (II) Loading sub module "fb"
     
226. [     9.444] (II) LoadModule: "fb"
     
227. [     9.444] (II) Loading /usr/lib/xorg/modules/libfb.so
     
228. [     9.445] (II) Module fb: vendor="X.Org Foundation"
     
229. [     9.445]    compiled for 1.15.1, module version = 1.0.0
     
230. [     9.445]    ABI class: X.Org ANSI C Emulation, version 0.4
     
231. [     9.445] (--) Depth 24 pixmap format is 32 bpp
     
232. [     9.472] (II) ARMSOC(0): Initialized a depth-32 visual for XRGB8888
     
233. [     9.472] (II) ARMSOC(0): Soft EXA mode
     
234. [     9.472] (II) EXA(0): Driver allocated offscreen pixmaps
     
235. [     9.472] (II) EXA(0): Driver registered support for the following operations:
     
236. [     9.472] (II)         Solid
     
237. [     9.472] (II)         Copy
     
238. [     9.472] (II)         Composite (RENDER acceleration)
     
239. [     9.472] (II) ARMSOC(0): [DRI2] Setup complete
     
240. [     9.472] (II) ARMSOC(0): [DRI2]   DRI driver: armsoc
     
241. [     9.472] (==) ARMSOC(0): Backing store enabled
     
242. [     9.472] (==) ARMSOC(0): Silken mouse enabled
     
243. [     9.474] (II) ARMSOC(0): RandR 1.2 enabled, ignore the following RandR disabled message.
     
244. [     9.475] (==) ARMSOC(0): DPMS enabled
     
245. [     9.475] (--) RandR disabled
     
246. [     9.488] (II) SELinux: Disabled on system
     
247. [     9.490] (II) ARMSOC(0): Setting screen physical size to 338 x 190
     
248. [     9.547] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
     
249. [     9.552] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/display-subsystem.4/drm/card0
     
250. [     9.552] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
     
251. [     9.553] (II) config/udev: Adding input device gpio_ir_recv (/dev/input/event0)
     
252. [     9.553] (**) gpio_ir_recv: Applying InputClass "evdev keyboard catchall"
     
253. [     9.553] (II) LoadModule: "evdev"
     
254. [     9.553] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
     
255. [     9.560] (II) Module evdev: vendor="X.Org Foundation"
     
256. [     9.561]    compiled for 1.15.0, module version = 2.8.2
     
257. [     9.561]    Module class: X.Org XInput Driver
     
258. [     9.561]    ABI class: X.Org XInput driver, version 20.0
     
259. [     9.561] (II) Using input driver \'evdev\' for \'gpio_ir_recv\'
     
260. [     9.561] (**) gpio_ir_recv: always reports core events
     
261. [     9.561] (**) evdev: gpio_ir_recv: Device: "/dev/input/event0"
     
262. [     9.561] (--) evdev: gpio_ir_recv: Vendor 0x1 Product 0x1
     
263. [     9.561] (--) evdev: gpio_ir_recv: Found keys
     
264. [     9.561] (II) evdev: gpio_ir_recv: Configuring as keyboard
     
265. [     9.561] (**) Option "config_info" "udev:/sys/devices/gpio-ir-receiver.13/rc/rc0/input0/event0"
     
266. [     9.561] (II) XINPUT: Adding extended input device "gpio_ir_recv" (type: KEYBOARD, id 6)
     
267. [     9.561] (**) Option "xkb_rules" "evdev"
     
268. [     9.561] (**) Option "xkb_model" "pc105"
     
269. [     9.561] (**) Option "xkb_layout" "us"
     
270. [     9.562] (II) config/udev: Adding input device gpio-keys.12 (/dev/input/event3)
     
271. [     9.562] (**) gpio-keys.12: Applying InputClass "evdev keyboard catchall"
     
272. [     9.562] (II) Using input driver \'evdev\' for \'gpio-keys.12\'
     
273. [     9.562] (**) gpio-keys.12: always reports core events
     
274. [     9.562] (**) evdev: gpio-keys.12: Device: "/dev/input/event3"
     
275. [     9.562] (--) evdev: gpio-keys.12: Vendor 0x1 Product 0x1
     
276. [     9.562] (--) evdev: gpio-keys.12: Found keys
     
277. [     9.562] (II) evdev: gpio-keys.12: Configuring as keyboard
     
278. [     9.562] (**) Option "config_info" "udev:/sys/devices/gpio-keys.12/input/input3/event3"
     
279. [     9.562] (II) XINPUT: Adding extended input device "gpio-keys.12" (type: KEYBOARD, id 7)
     
280. [     9.562] (**) Option "xkb_rules" "evdev"
     
281. [     9.562] (**) Option "xkb_model" "pc105"
     
282. [     9.562] (**) Option "xkb_layout" "us"
     
283. [     9.563] (II) config/udev: Adding input device RockchipHDMI HDMI Jack (/dev/input/event2)
     
284. [     9.563] (II) No input driver specified, ignoring this device.
     
285. [     9.563] (II) This device may have been added with another device file.
     
286. [     9.563] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (gpio-rc-recv) (/dev/input/event1)
     
287. [     9.563] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): Applying InputClass "evdev pointer catchall"
     
288. [     9.563] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): Applying InputClass "evdev keyboard catchall"
     
289. [     9.563] (II) Using input driver \'evdev\' for \'MCE IR Keyboard/Mouse (gpio-rc-recv)\'
     
290. [     9.564] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): always reports core events
     
291. [     9.564] (**) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Device: "/dev/input/event1"
     
292. [     9.564] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Vendor 0 Product 0
     
293. [     9.564] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found 3 mouse buttons
     
294. [     9.564] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found relative axes
     
295. [     9.564] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found x and y relative axes
     
296. [     9.564] (--) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Found keys
     
297. [     9.564] (II) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Configuring as mouse
     
298. [     9.564] (II) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): Configuring as keyboard
     
299. [     9.564] (**) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): YAxisMapping: buttons 4 and 5
     
300. [     9.564] (**) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
     
301. [     9.564] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
     
302. [     9.564] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (gpio-rc-recv)" (type: KEYBOARD, id 8)
     
303. [     9.564] (**) Option "xkb_rules" "evdev"
     
304. [     9.564] (**) Option "xkb_model" "pc105"
     
305. [     9.564] (**) Option "xkb_layout" "us"
     
306. [     9.564] (II) evdev: MCE IR Keyboard/Mouse (gpio-rc-recv): initialized for relative axes.
     
307. [     9.564] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) keeping acceleration scheme 1
     
308. [     9.564] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) acceleration profile 0
     
309. [     9.564] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) acceleration factor: 2.000
     
310. 
     
311. [     9.564] (**) MCE IR Keyboard/Mouse (gpio-rc-recv): (accel) acceleration threshold: 4

Copy the code

isle

we haven't see  the  Modeline 800X480

Alexander

Yes, but how can i fix it? If I connect same display via VGA, Modeline 800x480 is present and display is working with native resolution. The largest problem is that display, if connected via HDMI, shows absolutely nothing.

isle

Have you tested on another firefly board?