DM-M10R800 does not work

eschoi@huvitz.c

I connected DM-M10R800 LVDS LCD with AIO-3399J Board.
and powered up.  and booting... but LVDS LCD did not work.
No response. what do I check?

leung先森

http://wiki.t-firefly.com/zh_CN/AIO-3399J/module_display.html#id4

eschoi@huvitz.c

thanks..  can I  use LCD with Linux ubuntu?
Is the command  same with android?

eschoi@huvitz.c

I hope Linux ubuntu Image that supports  LVDS LCD display funtion

leung先森

eschoi@huvitz.c Posted at 8/24/2018 19:11
I hope Linux ubuntu Image that supports  LVDS LCD display funtion

Linux Image will be released. Be patient .You can do it yourself. Just use the dts  rk3399-firefly-aio-3399j-lvds.dts

eschoi@huvitz.c

leung先森 Posted at 8/27/2018 10:55
Linux Image will be released. Be patient .You can do it yourself. Just use the dts  rk3399-firefl ...

I tried with command below
make rk3399-firefly-aio-linux-lvds.img -j4
but no response, no backlight, no display
what can I do next?

leung先森

eschoi@huvitz.c Posted at 9/5/2018 10:48
I tried with command below
make rk3399-firefly-aio-linux-lvds.img -j4
but no response, no backli ...

rk3399-firefly-aio-linux-lvds.rar (7.13 KB, Down times: 4)

9/5/2018 15:12 Uplaod

Click on the file name to download attach

eschoi@huvitz.c

thanks...I found solutiion..
I need to change PWM default-brightness-level  from 200 to 100
and then backlight was turned on

cocacola89

No doubt this is an excellent article, I have gained a lot of knowledge after reading Good luck. The topic of the blog is great, there is almost everything to read. thanks! run 3

derekgr503

Your article was so impactful, thank you for sharing it. Downloadable C-BCBDC-2505 PDF helped me get ahead in my career and earn more. Now, I’m offering it to you for free!