Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Board › AIO-3399C› Quiz Unparalleled Valid Dumps HPE7-A03 Ebook - Aruba ...
New Topic
Print Previous Topic Next Topic

[General] Quiz Unparalleled Valid Dumps HPE7-A03 Ebook - Aruba Certified Campus Access Arc

carlfox850

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133

【General】 Quiz Unparalleled Valid Dumps HPE7-A03 Ebook - Aruba Certified Campus Access Arc

Posted at 3 hour before      View：3 | Replies：0        Print      Only Author   [Copy Link] 1#
DOWNLOAD the newest Test4Sure HPE7-A03 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1t3u5gQBoo5oXTK__a-NoZMdt8PtyXAav
Success in the HPE7-A03 test of the HP HPE7-A03 credential is essential in today's industry to verify the skills and get well-paying jobs in reputed firms around the whole globe. Earning the Aruba Certified Campus Access Architect Exam HPE7-A03 Certification sharpens your skills and helps you to accelerate your career in today's cut throat competition in the HP industry. It is not easy to clear the HPE7-A03 exam on the maiden attempt.
HP HPE7-A03 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Propose the Solution: The focal point of this topic is creating the design documentation and the final design. Moreover, the topic also focuses on presenting the solution.
Topic 2
  • Analyze Requirements: It focuses on determining possible high-level solutions. The topic also discusses mapping the needs into technical solutions and evaluating the proposed solution against project objectives and dependencies. Moreover, it also focuses on documenting assumptions.
Topic 3
  • Discover Requirements: This topic defines the goals and identifies the current environment and the objectives. Lastly, it also focuses on collecting information.
Topic 4
  • Architect the Solution: It measures your knowledge about identifying the solution options, designing high-level topologies, selecting the correct products, and determining the suitable overlay and underlay design. Additionally, the topic discusses how to verify that the design meets the original requirements.

HP HPE7-A03 Desktop-Based Practice Exam SoftwareOur HPE7-A03 exam torrent is available in PDF, software, and online three modes, which allowing you to switch learning materials on paper, on your phone or on your computer, and to study anywhere and anytime with the according version of HPE7-A03 practice test. Before you purchase the system, HPE7-A03 Practice Test provides you with a free trial service, so that customers can fully understand our system before buying; after the online payment is successful, you can receive mail from customer service in 5 to 10 minutes, and then immediately begin to learn HPE7-A03 training prep.
HP Aruba Certified Campus Access Architect Exam Sample Questions (Q11-Q16):NEW QUESTION # 11
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot location tracking in their four floors of corporate space. The APs are not Ideally placed to allow for smooth map transitions.
What could you add lo provide better tracking? (Select two.)
  • A. beacons
  • B. UXI sensors
  • C. more APs
  • D. tags
Answer: A,C
Explanation:
For improving Blue Dot location tracking in corporate spaces where access points (APs) are not ideally placed for smooth map transitions, adding more APs and deploying beacons are effective strategies. More APs can enhance the density and coverage of the Wi-Fi network, providing more data points for more accurate location tracking. Beacons, specifically designed for precise indoor positioning, can supplement Wi-Fi-based location services by broadcasting signals that mobile devices can use to determine their location with greater accuracy.
This combination ensures better tracking and smoother map transitions within the corporate space, enhancing the overall effectiveness of the Blue Dot location tracking solution.

NEW QUESTION # 12
it has been identified that the client's existing network is having to retransmit packets due to possible hardware or configuration issues. A review of hardware configuration and transport reliability will need to be assessed prior to completing the new design.
What should this phenomenon be classified as?
  • A.
  • B.
  • C.
Answer: B
Explanation:
The phenomenon where packets have to be retransmitted due to possible hardware or configuration issues is classified as "Loss," depicted in Option B. Packet loss occurs when one or more packets of data traveling across a network fail to reach their destination, which can be caused by errors in data transmission, typically resulting from network congestion, hardware failure, or configuration errors. When packet loss occurs, protocols like TCP ensure that the data is retransmitted so that the integrity of the communication is maintained. In a network design, ensuring the reliability of hardware and proper configuration is critical to minimize packet loss.

NEW QUESTION # 13
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security on the wired network infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks. For their POS systems, they need a low-latency network connection between the POS system and the POS server in the data center on the ship. Also, the CSO wants to enhance the WLAN security as well by tunneling all user traffic.
What solution fits the customer's requirements?
  • A. Standardize on Aruba 6200 switches for the edge. 8325 for the RR. 8360 for the stub/border, and utilize Aruba Central NetConductor
  • B. Standardize on Aruba 6300 switches for the edge. 8325 for the RR. 8360 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor.
  • C. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8360 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor.
  • D. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8360 for the stub/border, and utilize Aruba Central NetConductor
  • E. Standardize on Aruba 6300 switches for the edge. 8320 for the RR. 8320 for the stub/border. 9240 for the WLAN Gateway, and utilize Aruba Central NetConductor
Answer: C
Explanation:
Considering the global cruise line company's requirement to enhance wired network security while ensuring low-latency connections for POS systems and tunneling all user traffic for WLAN security, the most fitting solution involves a combination of Aruba switches and gateway along with a network management and orchestration tool. Specifically, standardizing on Aruba 6300 switches for the edge layer caters to the need for high-performance, fan-less switches with 10GbE uplinks, matching the requirement for upgraded cabin and technical room connections. The Aruba 8320 as a Route Reflector (RR) and Aruba 8360 for the stub/border provide a robust core and distribution layer with high throughput and redundancy. The inclusion of a 9240 WLAN Gateway addresses the need for secure WLAN user traffic tunneling. Utilizing Aruba Central NetConductor enhances network management efficiency, security policy enforcement, anddynamic segmentation across the wired and wireless infrastructure, aligning with the ESP architecture from Aruba and meeting the company's security enhancement objectives.

NEW QUESTION # 14
it has been identified that the client's existing network is having to retransmit packets due to possible hardware or configuration issues. A review of hardware configuration and transport reliability will need to be assessed prior to completing the new design.
What should this phenomenon be classified as?
  • A.
  • B.
  • C.
Answer: B
Explanation:
The phenomenon where packets have to be retransmitted due to possible hardware or configuration issues is classified as "Loss," depicted in Option B. Packet loss occurs when one or more packets of data traveling across a network fail to reach their destination, which can be caused by errors in data transmission, typically resulting from network congestion, hardware failure, or configuration errors. When packet loss occurs, protocols like TCP ensure that the data is retransmitted so that the integrity of the communication is maintained. In a network design, ensuring the reliability of hardware and proper configuration is critical to minimize packet loss.

NEW QUESTION # 15
You are going with a 3-tier design and need to calculate the oversubscription ratio on the Access.
Distribution. Core, and ToR Layer. What is a suitable oversubscription ratio for each layer?

Answer:
Explanation:

Explanation:
Access - 20:1
Aggregation - 4:1
Core - 2:1
ToR - Not typically applicable in a 3-tier design; however, if ToR were used, it could be 24:1 or better depending on the specific design and requirements.

NEW QUESTION # 16
......
What companies need most now is the talents with comprehensive strength. How to prove your strength? It's time to get an internationally certified HPE7-A03 certificate! Our HPE7-A03 exam questions are definitely the leader in this industry. In many ways, our HPE7-A03 Real Exam has their own unique advantages. The first and the most important aspect is the pass rate which is concerned by the most customers, we have a high pas rate as 98% to 100%, which is unique in the market!
HPE7-A03 Valid Dumps Book: https://www.test4sure.com/HPE7-A03-pass4sure-vce.html
BONUS!!! Download part of Test4Sure HPE7-A03 dumps for free: https://drive.google.com/open?id=1t3u5gQBoo5oXTK__a-NoZMdt8PtyXAav
https://www.crampdf.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list