Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › Core-3128J› Authentic NSE4_FGT_AD-7.6 Exam Questions, NSE4_FGT_A ...
New Topic
Print Previous Topic Next Topic

[General] Authentic NSE4_FGT_AD-7.6 Exam Questions, NSE4_FGT_AD-7.6 Certification Practice

roystar745

138

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
138

【General】 Authentic NSE4_FGT_AD-7.6 Exam Questions, NSE4_FGT_AD-7.6 Certification Practice

Posted at yesterday 20:50      View：5 | Replies：0        Print      Only Author   [Copy Link] 1#
We can make sure that if you purchase our NSE4_FGT_AD-7.6 exam questions, you will have the right to enjoy our perfect after sale service and the high quality products. So do not hesitate and buy our NSE4_FGT_AD-7.6 study guide, we believe you will find surprise from our exam products. And not only you can enjoy the service before you pay for our NSE4_FGT_AD-7.6 learning guide, you can also have the right to have free updates for one year after your purchase.
Fortinet NSE4_FGT_AD-7.6 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Firewall Policies and Authentication: This domain focuses on creating firewall policies, configuring SNAT and DNAT for address translation, implementing various authentication methods, and deploying FSSO for user identification.
Topic 2
  • Content Inspection: This domain addresses inspecting encrypted traffic using certificates, understanding inspection modes and web filtering, configuring application control, deploying antivirus scanning modes, and implementing IPS for threat protection.
Topic 3
  • VPN: This domain focuses on implementing meshed or partially redundant IPsec VPN topologies for secure connections.
Topic 4
  • Routing: This domain covers configuring static routes for packet forwarding and implementing SD-WAN to load balance traffic across multiple WAN links.
Topic 5
  • Deployment and System Configuration: This domain covers initial FortiGate setup, logging configuration and troubleshooting, FGCP HA cluster configuration, resource and connectivity diagnostics, FortiGate cloud deployments (CNF and VM), and FortiSASE administration with user onboarding.

Fortinet Focus on What’s Important of NSE4_FGT_AD-7.6  Authentic Exam QuestionsAccording to different kinds of questionnaires based on study condition among different age groups, our NSE4_FGT_AD-7.6 test prep is totally designed for these study groups to improve their capability and efficiency when preparing for NSE4_FGT_AD-7.6 exams, thus inspiring them obtain the targeted NSE4_FGT_AD-7.6 certificate successfully. There are many advantages of our NSE4_FGT_AD-7.6 question torrent that we are happy to introduce you and you can pass the NSE4_FGT_AD-7.6 exam for sure.
Fortinet NSE 4 - FortiOS 7.6 Administrator Sample Questions (Q37-Q42):NEW QUESTION # 37
An administrator suspects that the Collector Agent is not forwarding login events to FortiGate.
What is the most effective troubleshooting step?
  • A. Restart the domain controller to refresh authentication services.
  • B. Verify if DC agent is enabled on the FortiGate.
  • C. Check if TCP port 8000 is open between the collector agent and FortiGate.
  • D. Verify if FortiGate is set to use LDAP authentication instead of FSSO.
Answer: C
Explanation:
The Collector Agent communicates with FortiGate over TCP port 8000. Ensuring this port is open and reachable is essential for forwarding login events.

NEW QUESTION # 38
Refer to the exhibit. The administrator configured SD-WAN rules and set the FortiGate traffic log page to display SD-WAN-specific columns: SD-WAN Quality and SD- WAN Rule Name.
FortiGate allows the traffic according to policy ID 1 placed at the top. This is the policy that allows SD-WAN traffic. Despite these settings, the traffic logs do not show the name of the SD-WAN rule used to steer those traffic flows.
What could be the reason?

  • A. FortiGate load balanced the traffic according to the implicit SD-WAN rule.
  • B. Destinations in the SD-WAN rules are configured for each application, but feature visibility is not enabled.
  • C. SD-WAN rule names do not appear immediately. The administrator must refresh the page.
  • D. There is no application control profile applied to the firewall policy.
Answer: A
Explanation:
The SD-WAN traffic log does not display an SD-WAN rule name because the traffic is being forwarded by the implicit SD-WAN rule. If no explicit SD-WAN rule matches the traffic, FortiGate falls back to the default implicit rule, which balances traffic based on the configured strategy (such as volume or sessions). Since no explicit rule applied, the rule name field remains blank in the logs.

NEW QUESTION # 39
Refer to the exhibit.

Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)
  • A. Administrators must restart FortiGate to allow new sessions.
  • B. FortiGate drops new sessions requiring inspection.
  • C. FortiGate skips quarantine actions.
  • D. Administrators cannot change the configuration.
Answer: C,D

NEW QUESTION # 40
Refer to the exhibit. The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity. What must the administrator configure to answer this specific request from the NOC team?

  • A. Ensure that all NOC_Access users are assigned the super_admin role to guarantee access
  • B. Increase the admintimeout value under config system accprofile NOC_Access.
  • C. Move NOC_Access to the top of the list to ensure all profile settings take effect.
  • D. Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.
Answer: B
Explanation:
The admintimeout setting in the admin access profile controls the inactivity timeout for GUI sessions. Increasing this value will extend the session duration before automatic disconnection.

NEW QUESTION # 41
You have configured an application control profile, set peer-to-peer traffic to Block under the Categories tab.
and applied it to the firewall policy. However, your peer-to-peer traffic on known ports is passing through the FortiGate without being blocked.
What FortiGate settings should you check to resolve this issue?
  • A. Application and Filter Overrides
  • B. FortiGuard category ratings
  • C. Replacement Messages for UDP-based Applications
  • D. Network Protocol Enforcement
Answer: D
Explanation:
When the Application sensor receives traffic on that port, the protocol decoder will try to determine if the received data matches the HTTPS traffic In this case it will not match because it is P2P traffic, so this will class as violation and blocked The protocol decoder also try to determine what type of traffic it is, and even if it could not figure out it is P2P traffic, it still count as a violation because even though it does not know what it is, it knows for fact it is not HTTPS

NEW QUESTION # 42
......
It is our promissory announcement that you will get striking by these viable ways. So do not feel giddy among tremendous materials in the market ridden-ed by false materials. With great outcomes of the passing rate upon to 98-100 percent, our NSE4_FGT_AD-7.6 practice materials are totally the perfect one. Different from all other bad quality practice materials that cheat you into spending much money on them, our NSE4_FGT_AD-7.6 practice materials are the accumulation of professional knowledge worthy practicing and remembering.
NSE4_FGT_AD-7.6 Certification Practice: https://www.prep4cram.com/NSE4_FGT_AD-7.6_exam-questions.html
https://kr.fast2test.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list