Want to use GPIO as SPI in ROC-RK3328-CC

zainiboi21

Dear Team, I'm using Roc-rk3328-CC Board fro utilizing its GPIOs to make use of SPI pins. I am unable to find a proper solution to my problem because i tried multiple methods like: https://github.com/Leapo/Rock64-R64.GPIO , https://github.com/rm-hull/spidev-test , https://github.com/chenphilip888/roc-rk3328-cc-python-gpio and many more as well. Let me know what is the best solution to my issue as i am using Ubuntu 18.04 in my board. Thanks.

895816513

Is the pin you want to use a multiplexed SPI pin, and if so, you can use SPI. If it is just an ordinary gpio pin, our team does not have a related solution if we want to simulate it as an SPI pin.

zainiboi21

i have already enabled uart, and i2c on it and these both are working fine. but i am unable to find a proper solution to enable SPI on my board.
no, it is mentioned that it is an spi pin. having csn0 and CE as well on the data sheet.

zainiboi21

Still waiting for the team to assist in this regard. I have followed up all documentations, but no one works.