ROC-RK3328-PC alternative way to go to MuskRom

mara

ROC-RK3328-PC does not go into the MaskRom mode according to the official instructions. Is there another way to switch to MaskRom mode, since when testing the bootloader, it was not completely recorded.

zhangzhenzhao

According to the wiki operation, you can enter the maskroom mode. When the machine is not powered on, short circuit CLK and GND, and then power on the machine to enter the maskroom. This is the only way to enter the maskroom.
C:\Users\azhan\Desktop\11.png

mara

zhangzhenzhao Posted at 8/2/2022 09:37
According to the wiki operation, you can enter the maskroom mode. When the machine is not powered on ...

I know about the wiki (I also gave a link to it), but at the moment, by closing the CLK and GND pins, it is impossible to transfer the board to MaskRom (maybe in previous times I could get to nearby elements when closing), so the question arises how much the CLK pin I'm connected to EMMC and not through nearby lying elements.

tedwhit600

市場對IT專業人員的需求越來越多，獲得Oracle 1Z0-1056-24認證會讓您更有優勢，平均工資也會高出20%，并能獲得更多的晉升機會。對于希望獲得1Z0-1056-24認證的專業人士來說，我們考古題是復習并通過考試的可靠題庫，同時幫助準備參加認證考試考生獲得1Z0-1056-24認證。我們確保為客戶提供高品質的Oracle 1Z0-1056-24考古題資料，這是我們聘請行業中最資深的專家經過整理而來，保證大家的考試高通過率。