Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Board › AIO-3588JD4› Pass4sure CWNA-109 Dumps Pdf & Valid Test CWNA-109 ...
New Topic
Print Previous Topic Next Topic

[Hardware] Pass4sure CWNA-109 Dumps Pdf & Valid Test CWNA-109 Braindumps

keithbe272

136

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
136

【Hardware】 Pass4sure CWNA-109 Dumps Pdf & Valid Test CWNA-109 Braindumps

Posted at yesterday 10:31      View：19 | Replies：0        Print      Only Author   [Copy Link] 1#
2026 Latest TestPassKing CWNA-109 PDF Dumps and CWNA-109 Exam Engine Free Share: https://drive.google.com/open?id=1LE-dJDFnJQ8Rorp7Hl5b2w-33gmcHlIL
All these three CWNP CWNA-109 practice exam formats provide a user-friendly interface to users. The CWNP CWNA-109 PDF questions file is very installed on any device and operating system. After the quick CWNP CWNA-109 Pdf Dumps file installation you can run this file anywhere and anytime and start CWNA-109 exam preparation.
The operating system of CWNA-109 exam practice has won the appreciation of many users around the world. Within five to ten minutes after your payment is successful, our operating system will send a link to CWNA-109 Training Materials to your email address. After our CWNA-109 study guide update, our operating system will also send you a timely message to ensure that you will not miss a single message.
Valid Test CWNP CWNA-109 Braindumps | CWNA-109 Reliable Cram MaterialsTestPassKing is a reliable study center providing you the valid and correct CWNA-109 questions & answers for boosting up your success in the actual test. CWNA-109 PDF file is the common version which many candidates often choose. If you are tired with the screen for study, you can print the CWNA-109 Pdf Dumps into papers. With the pdf papers, you can write and make notes as you like, which is very convenient for memory. We can ensure you pass with CWNA-109 study torrent at first time.
CWNP Wireless Network Administrator (CWNA) Sample Questions (Q16-Q21):NEW QUESTION # 16
The IEEE 802.11-2012 standard requires VHT capable devices to be backward compatible with devices using which other 802.11 physical layer specifications (PHYs)?
  • A. OFDM
  • B. HR/DSSS
  • C. DSSS-OFDM
  • D. ERP-PBCC
Answer: A
Explanation:
OFDM (Orthogonal Frequency Division Multiplexing) is the physical layer specification (PHY) that VHT capable devices must be backward compatible with according to the IEEE 802.11-2012 standard. VHT (Very High Throughput) is a PHY and MAC enhancement that is defined in the IEEE 802.11ac amendment and is also known as Wi-Fi 5. VHT operates only in the 5 GHz band and uses features such as wider channel bandwidths (up to 160 MHz), higher modulation schemes (up to 256-QAM), more spatial streams (up to eight), multi-user MIMO (MU-MIMO), beamforming, and VHT PHY and MAC enhancements. VHT can achieve data rates up to 6.9 Gbps.
According to the IEEE 802.11-2012 standard, VHT capable devices must be backward compatible with devices using OFDM PHY, which is defined in the IEEE 802.11a amendment and is also used by IEEE 802.11 g, IEEE 802.11n, and IEEE 802.11h amendments. OFDM operates in both the 2.4 GHz and 5 GHz bands and uses features such as subcarriers, symbols, guard intervals, and OFDM PHY and MAC enhancements. OFDM can achieve data rates up to 54 Mbps.
Backward compatibility means that VHT capable devices can interoperate with OFDM devices on the same network by using common features and parameters that are supported by both PHYs. For example, VHT capable devices can use a channel bandwidth of 20 MHz, a modulation scheme of BPSK, QPSK, or 16-QAM, one spatial stream, no beamforming, and OFDM PHY and MAC headers when communicating with OFDM devices. Backward compatibility also means that VHT capable devices can fall back to OFDM mode when the signal quality or SNR is too low for VHT mode. References: 1, Chapter 3, page 123; 2, Section 3.2

NEW QUESTION # 17
You administer a WLAN that offers a guest SSID of GUESTNWORK. Users connect to the GUESTNWORK SSID, but report that they cannot browse the Internet. The devices simply report no Internet connection. What common problem causes this scenario?
  • A. IP routing issues
  • B. Captive portal issues
  • C. NTP issues
  • D. Hardware issues
Answer: B
Explanation:
A common problem that causes this scenario is captive portal issues. A captive portal is a web page that requires users to authenticate or accept terms and conditions before accessing the Internet through a WLAN.
A captive portal is often used for guest networks to provide security and control over the network access. A captive portal works by intercepting the user's web requests and redirecting them to the portal page until the user completes the required action. However, sometimes the captive portal may not work properly due to various reasons, such as browser settings, firewall rules, DNS configuration, or network errors. This can prevent the user from browsing the Internet or seeing the portal page. To troubleshoot captive portal issues, you can try to use a different browser, clear the browser cache and cookies, disable any VPN or proxy settings, manually enter the portal URL, or contact the network administrator. NTP issues, hardware issues, or IP routing issues are not common problems that cause this scenario. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 343; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 333.

NEW QUESTION # 18
What can an impedance mismatch in the RF cables and connectors cause?
  • A. Increased range of the RF signal
  • B. Fewer MCS values in the MCS table
  • C. Increased amplitude of the RF signal
  • D. Excessive VSWR
Answer: D
Explanation:
VSWR stands for Voltage Standing Wave Ratio, which is a measure of how well the impedance of the RF cable and connectors matches the impedance of the transmitter and the antenna. Impedance is the opposition to the flow of alternating current in an RF circuit, and it depends on the frequency, resistance, capacitance, and inductance of the components. A perfect impedance match would have a VSWR of 1:1, meaning that all the power is transferred from the transmitter to the antenna, and none is reflected back. However, in reality, there is always some degree of mismatch, which causes some power to be reflected back to the transmitter, creating standing waves along the cable. This reduces the efficiency and performance of the wireless system, and can also damage the transmitter. Excessive VSWR can be caused by using poor quality or damaged cables and connectors, or by using components that have different impedance ratings123. References: CWNA-
109 Study Guide, Chapter 2: Radio Frequency Fundamentals, page 90; CWNA-109 Study Guide, Chapter 2:
Radio Frequency Fundamentals, page 86; CWNP website, CWNA Certification.

NEW QUESTION # 19
A non-802.11 device is suspected of causing interference on the WLAN. You are not certain of the location or type of device. What is the best solution for locating this non-802.11 device?
  • A. Laptop-based spectrum analyzer with an omni-directional antenna
  • B. Laptop-based spectrum analyzer with an omni-directional antenna
  • C. Laptop-based spectrum analyzer with a directional antenna
  • D. Access point spectrum analyzer
Answer: C
Explanation:
A laptop-based spectrum analyzer with a directional antenna is the best solution for locating a non-802.11 device that is suspected of causing interference on the WLAN. A spectrum analyzer is a device or a software application that can measure and display the frequency spectrum of electromagnetic signals in a given range.
A spectrum analyzer can show the amplitude, frequency, bandwidth, modulation, and other characteristics of different signals in the spectrum, which can help identify their sources and types. A spectrum analyzer can also detect non-802.11 devices that may cause interference on the WLAN, such as microwave ovens, cordless phones, Bluetooth devices, or radar systems. A laptop-based spectrum analyzer is a software application that runs on a laptop computer and uses an external USB adapter as its RF interface. A laptop-based spectrum analyzer has the advantage of being portable, flexible, and cost-effective compared to a hardware-based spectrum analyzer. A directional antenna is an antenna that radiates or receives RF signals more strongly in one direction than in others. A directional antenna has a high gain and a narrow beamwidth, which means it can focus the RF energy in a specific direction and reduce the interference from other directions. A directional antenna can also increase the range and sensitivity of the RF signal detection. To locate a non-802.11 device that is causing interference on the WLAN, a laptop-based spectrum analyzer with a directional antenna can be used to perform a technique called RF hunting or triangulation. This technique involves pointing the directional antenna in different directions and observing the signal strength and characteristics of the interfering device on the spectrum analyzer. By moving around and changing the direction of the antenna, the location of the interfering device can be estimated based on where the signal strength is highest and most consistent. References: 1, Chapter 7, page 282; 2, Section 4.3

NEW QUESTION # 20
When using a spectrum to look for non Wi-Fi interference sources, you notice significant interference across the entire 2.4 GHz band (not on a few select frequencies) within the desktop area of a users workspace, but the interference disappears quickly after just 2 meters. What is the most likely cause of this interference?
  • A. USB 3 devices in the user's work area
  • B. Unintentional radiation from the PC power supply
  • C. Bluetooth devices in the user's work area
  • D. Excess RF energy from a nearby AP
Answer: A
Explanation:
USB 3 devices in the user's work area are the most likely cause of this interference when using a spectrum analyzer to look for non-Wi-Fi interference sources. A spectrum analyzer is a tool that measures and visualizes the radio frequency activity and interference in the wireless environment. A spectrum analyzer can show the spectrum usage and energy levels on each frequency band or channel and help identify and locate the sources of interference. Interference is any unwanted signal that disrupts or degrades the intended signal on a wireless channel. Interference can be caused by various sources, such as other Wi-Fi devices, non-Wi-Fi devices, or natural phenomena. Interference can affect WLAN performance and quality by causing signal loss, noise, distortion, or errors. USB 3 devices are non-Wi-Fi devices that use USB 3.0 technology to transfer data at high speeds between computers and peripherals, such as hard drives, flash drives, cameras, or printers.
USB 3 devices can generate electromagnetic radiation that interferes with Wi-Fi signals in the 2.4 GHz band, especially when they are close to Wi-Fi devices or antennas. USB 3 devices can cause significant interference across the entire 2.4 GHz band (not on a few select frequencies) within the desktop area of a user's workspace, but the interference disappears quickly after just 2 meters. This is because USB 3 devices emit broadband interference that affects all channels in the 2.4 GHz band with a high intensity near the source but a low intensity at a distance due to attenuation. The other options are not likely to cause this interference pattern when using a spectrum analyzer to look for non-Wi-Fi interference sources. Bluetooth devices in the user's work area are non-Wi-Fi devices that use Bluetooth technology to communicate wirelessly between computers and peripherals, such as keyboards, mice, headphones, or speakers. Bluetooth devices can cause interference with Wi-Fi signals in the 2.4 GHz band, but they use frequency hopping spread spectrum (FHSS) technique that changes frequencies rapidly and randomly within a range of 79 channels. Therefore, Bluetooth devices do not cause significant interference across the entire 2.4 GHz band (not on a few select frequencies), but rather intermittent interference on some channels at different times. Excess RF energy from a nearby AP is not a non-Wi-Fi interference source but rather a Wi-Fi interference source that occurs when an AP transmits more power than necessary for its coverage area. Excess RF energy from a nearby AP can cause co- channel interference (CCI) with other APs or client devices that use the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium,

NEW QUESTION # 21
......
We all know, the IT industry is a new industry, and it is one of the chains promoting economic development, so its important role can not be ignored. Our TestPassKing's CWNA-109 exam training materials is the achievement of TestPassKing's experienced IT experts with constant exploration, practice and research for many years. Its authority is undeniable. If you buy our CWNA-109 VCE Dumps, we will provide one year free renewal service.
Valid Test CWNA-109 Braindumps: https://www.testpassking.com/CWNA-109-exam-testking-pass.html
CWNP Pass4sure CWNA-109 Dumps Pdf This professionally designed desktop practice exam software is customizable, which helps you to adjust timings and questions of the mock tests, The CWNP CWNA-109 materials of TestPassKing offer a lot of information for your exam guide, including the questions and answers, CWNP Pass4sure CWNA-109 Dumps Pdf We are committed to helping you pass the exam and get the certificate as soon as possible.
The process for creating a server varies from platform to platform, CWNA-109 but this chapter shows specifically how to configure and set up a single server within the Windows environment.
There's no continuous story line that has to be maintained, This professionally CWNA-109 Reliable Cram Materials designed desktop practice exam software is customizable, which helps you to adjust timings and questions of the mock tests.
Latest updated CWNP Pass4sure CWNA-109 Dumps Pdf Are Leading Materials & Top CWNA-109: CWNP Wireless Network Administrator (CWNA)The CWNP CWNA-109 Materials of TestPassKing offer a lot of information for your exam guide, including the questions and answers, We are committed to helping you pass the exam and get the certificate as soon as possible.
The TestPassKing is a leading platform that offers valid, updated, and real CWNA-109 Questions that are particularly designed for quick and complete CWNA-109 exam preparation.
We update our questions frequently.
P.S. Free 2026 CWNP CWNA-109 dumps are available on Google Drive shared by TestPassKing: https://drive.google.com/open?id=1LE-dJDFnJQ8Rorp7Hl5b2w-33gmcHlIL
https://www.itpass4sure.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list