Why am I getting AdbCommandRejectedException getting properties for device ?????

stillgoing

Hello:

I'm attempting to install a simple test app on the RK3288, thus far without success.

When attempting to debug the app Android Studio, a line is displayed in the AS console window stating it is "waiting on device."

In the terminal window used to start adb server, the following line is displayed multiple times:

AdbCommandRejectedException getting properties for device ????????????

From the same terminal window, "adb devices" returns this:

List of devices attached
????????????        no permissions

Can someone help me understand why this is happening?

Fwiw, my environment is Ubuntu 14.04.2 64-bit, Android Studio 1.1.0

Thank you.

solid

you need to add udev rules or a usb.ini file from lsusb

stillgoing

Thank you for the response.

Itwas my understanding that udev rules had been set up already according to the instructions on the wiki page "ADB Usage" -> "ADB Installation under Ubuntu":

http://wiki.t-firefly.com/index.php/Fir ... der_Ubuntu

Find below what I did according to that page. Are you saying that I need to do something different? Are these instructions for the RK3288 under Ubuntu incorrect or missing something?

Add device identity:
===================

mkdir -p ~/.android
vi ~/.android/adb_usb.ini
# append following line
0x2207


Add udev rule:
==============
sudo vi /etc/udev/rules.d/51-android.rules
# append following line:
SUBSYSTEM=="usb", ATTR{idVendor}=="2207", MODE="0666"


plug the USB OTG cable out, then plug in, or run the following
commands, to make udev rule take effect:
=======================================

sudo udevadm control --reload-rules
sudo udevadm trigger

busybee

So copy the adb to /usr/bin for convenience.

Do:

sudo adb kill-server

sudo adb shell

To see if you can get a shell of the device.

This is to confirm if permission is the root cause of your problem.

stillgoing

busybee:

I did as you suggested above, am still running into the same problem attempting to connect to adb over usb.

However,  I can connect to adb over ethernet.  So...I have serial-over-usb debug console, usb OTG  for flashing, and ethernet for adb - with that combination everything is working to the extent needed.

Will update this thread when (or if) I finally resolve the adb-over-usb problem.

adamgra363

I truly appreciate your article; the content really left me in awe! Free SAE-C01 valid exam pattern to help you enhance your IT skills. Wishing you good luck!

ethangr983

This is such a motivational piece, thank you for sharing! Study guide SPLK-4001 pdf provides quality content, and it’s completely free.

scottle446

I’m giving this a like without a second thought. Good luck on your exams! Here are the free Certified OMG-OCSMP-MBF200 questions questions to help you out!