Network performance

pacopad

Hi everybody

My board has ethernet problems in 1000/full mode , iperf output indicates 1,5mbps in tcp. When i force 100/full i got 90mbps in iperf. Résults are the same under linux and android

Is it a kernel bug ??

Thx you

Pacopad

zhansb

show the attachme which include kernel log when connect 1000 mode.

pacopad

Hi Zhansb,

here is the full boot log http://pastebin.com/KhHqCQwb

Then when i put the wire in 100Mbps switch

[  326.247106] libphy: stmmac-0:01 - Link is Down

[  336.087163] stmmc_pltfr_fix_mac_speed: fix speed to 100

[  336.087181] stmmc_pltfr_fix_mac_speed: fix speed for RGMII

[  336.087190] libphy: stmmac-0:01 - Link is Up - 100/Full

I got packet loss when i ping a computer on my network.

ping 192.168.1.1

PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.

64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.874 ms

64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.499 ms

64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.417 ms

64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.622 ms

64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.495 ms

64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.390 ms

64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=0.415 ms

64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=0.461 ms

64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=0.415 ms

64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=0.469 ms

64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=0.427 ms

64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=0.491 ms

64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=0.440 ms

64 bytes from 192.168.1.1: icmp_seq=17 ttl=64 time=0.611 ms

64 bytes from 192.168.1.1: icmp_seq=18 ttl=64 time=0.583 ms

64 bytes from 192.168.1.1: icmp_seq=19 ttl=64 time=0.441 ms

64 bytes from 192.168.1.1: icmp_seq=20 ttl=64 time=0.510 ms

64 bytes from 192.168.1.1: icmp_seq=21 ttl=64 time=0.579 ms

^C

--- 192.168.1.1 ping statistics ---

21 packets transmitted, 18 received, 14% packet loss, time 19994ms

rtt min/avg/max/mdev = 0.390/0.507/0.874/0.115 ms

I'm an IT Tech so i got all basic verifications, i changed switch and wires. My network is ok with other computers and devices.

Thx for your help

Pacopad

zhansb

make sure your network cable and router support 1000M?

if they are correct ,the log will be like this:

[  453.385496] stmmc_pltfr_fix_mac_speed: fix speed to 1000
[  453.385735] stmmc_pltfr_fix_mac_speed: fix speed for RGMII
[  453.385844] libphy: stmmac-0:01 - Link is Up - 1000/Full

pacopad

Hi,

The 1000/full logs are in the pastebin Line 1135.

My network is giga ok , working good with computer and PS3 and synology ds415

Please could you give me a réal way to Check ?? I tryed at office i got same matter, is my board défective ???

Pacopad

Andy

try connect device and computer directly .
set a static ip for device . make sure the same network segment and under the 1000/Full environment
try to ping your computer again .check the Packet loss rate and iperf your computer ip again.

pacopad

Here are results of my tests

COMPUTER <-> FIREFLY DIRECTLY CONNECTED 1000/FULL

Mac-Pro:~ pacopad$ iperf -c 192.168.1.151 -i2 -t120

------------------------------------------------------------

Client connecting to 192.168.1.151, TCP port 5001

TCP window size:  129 KByte (default)

------------------------------------------------------------

[  4] local 192.168.1.1 port 50131 connected with 192.168.1.151 port 5001

[ ID] Interval       Transfer     Bandwidth

[  4]  0.0- 2.0 sec   256 KBytes  1.05 Mbits/sec

[  4]  2.0- 4.0 sec   256 KBytes  1.05 Mbits/sec

[  4]  4.0- 6.0 sec   128 KBytes   524 Kbits/sec

[  4]  6.0- 8.0 sec   128 KBytes   524 Kbits/sec

[  4]  8.0-10.0 sec  0.00 Bytes  0.00 bits/sec

[  4] 10.0-12.0 sec   128 KBytes   524 Kbits/sec

[  4] 12.0-14.0 sec  0.00 Bytes  0.00 bits/sec

^C[  4] 14.0-16.0 sec   128 KBytes   524 Kbits/sec

[  4] 16.0-18.0 sec  0.00 Bytes  0.00 bits/sec

[  4] 18.0-20.0 sec  0.00 Bytes  0.00 bits/sec

[  4] 20.0-22.0 sec  0.00 Bytes  0.00 bits/sec

[  4]  0.0-23.7 sec  1.12 MBytes   399 Kbits/sec

COMPUTER <-> FIREFLY DIRECTLY CONNECTED 100/FULL FORCED ON FIREFLY

Mac-Pro:~ pacopad$ iperf -c 192.168.1.151 -i2 -t120

------------------------------------------------------------

Client connecting to 192.168.1.151, TCP port 5001

TCP window size:  129 KByte (default)

------------------------------------------------------------

[  4] local 192.168.1.1 port 50137 connected with 192.168.1.151 port 5001

[ ID] Interval       Transfer     Bandwidth

[  4]  0.0- 2.0 sec  22.8 MBytes  95.4 Mbits/sec

[  4]  2.0- 4.0 sec  22.6 MBytes  94.9 Mbits/sec

[  4]  4.0- 6.0 sec  22.5 MBytes  94.4 Mbits/sec

[  4]  6.0- 8.0 sec  22.4 MBytes  93.8 Mbits/sec

[  4]  8.0-10.0 sec  22.4 MBytes  93.8 Mbits/sec

[  4] 10.0-12.0 sec  22.4 MBytes  93.8 Mbits/sec

[  4] 12.0-14.0 sec  22.6 MBytes  94.9 Mbits/sec

[  4] 14.0-16.0 sec  22.1 MBytes  92.8 Mbits/sec

[  4] 16.0-18.0 sec  22.5 MBytes  94.4 Mbits/sec

^C[  4]  0.0-19.4 sec   218 MBytes  94.3 Mbits/sec

COMPUTER <-> NAS SYNOLOGY THROUGH NETWORK

Mac-Pro:~ pacopad$ iperf -c 192.168.1.2 -i2 -t120

------------------------------------------------------------

Client connecting to 192.168.1.2, TCP port 5001

TCP window size:  129 KByte (default)

------------------------------------------------------------

[  4] local 192.168.1.1 port 50159 connected with 192.168.1.2 port 5001

[ ID] Interval       Transfer     Bandwidth

[  4]  0.0- 2.0 sec   223 MBytes   935 Mbits/sec

[  4]  2.0- 4.0 sec   223 MBytes   934 Mbits/sec

[  4]  4.0- 6.0 sec   223 MBytes   935 Mbits/sec

[  4]  6.0- 8.0 sec   223 MBytes   934 Mbits/sec

[  4]  8.0-10.0 sec   223 MBytes   934 Mbits/sec

[  4] 10.0-12.0 sec   223 MBytes   935 Mbits/sec

[  4] 12.0-14.0 sec   223 MBytes   934 Mbits/sec

[  4] 14.0-16.0 sec   223 MBytes   934 Mbits/sec

[  4] 16.0-18.0 sec   223 MBytes   935 Mbits/sec

^C[  4]  0.0-18.7 sec  2.04 GBytes   935 Mbits/sec

It really think there is a problem and that's not located on my network

I 'll try to compile a 3.17 kernel to see if there are changes

Thx

Pacopad