Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › Core-1126-JD4› NSE5_SSE_AD-7.6 Valid Test Topics | Practice Test NS ...
New Topic
Print Previous Topic Next Topic

[General] NSE5_SSE_AD-7.6 Valid Test Topics | Practice Test NSE5_SSE_AD-7.6 Fee

tonymil522

134

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
134

【General】 NSE5_SSE_AD-7.6 Valid Test Topics | Practice Test NSE5_SSE_AD-7.6 Fee

Posted at yesterday 14:14      View：2 | Replies：0        Print      Only Author   [Copy Link] 1#
Our PassLeader devote themselves for years to develop the NSE5_SSE_AD-7.6 exam software to help more people who want to have a better development in IT field to pass NSE5_SSE_AD-7.6 exam. Although there are so many exam materials about NSE5_SSE_AD-7.6 exam, the NSE5_SSE_AD-7.6 exam software developed by our PassLeader professionals is the most reliable software. Practice has proved that almost all those who have used the software we provide have successfully passed the NSE5_SSE_AD-7.6 Exam. Many of them just use spare time preparing for NSE5_SSE_AD-7.6 Fortinet exam, and they are surprised to pass the certificated exam.
Fortinet NSE5_SSE_AD-7.6 Exam Syllabus Topics:
TopicDetails
Topic 1
  • SASE Deployment: This domain covers FortiSASE administration settings, user onboarding methods, and integration with SD-WAN infrastructure.
Topic 2
  • Analytics: This domain covers analyzing SD-WAN and FortiSASE logs to monitor traffic behavior, identify security threats, and generate reports.
Topic 3
  • Decentralized SD-WAN: This domain covers basic SD-WAN implementation including configuring members, zones, and performance SLAs to monitor network quality.
Topic 4
  • Rules and Routing: This section addresses configuring SD-WAN rules and routing policies to control and direct traffic flow across different links.
Topic 5
  • Secure Internet Access (SIA) and Secure SaaS Access (SSA): This section focuses on implementing security profiles for content inspection and deploying compliance rules to managed endpoints.

Practice Test NSE5_SSE_AD-7.6 Fee, NSE5_SSE_AD-7.6 Reliable Exam BookNSE5_SSE_AD-7.6 is so flexible that you can easily change the timings, types of questions, and topics for each mock exam. PassLeader's Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator practice test contains all the important questions that will appear in the actual NSE5_SSE_AD-7.6 Exam. We design and update our Fortinet NSE5_SSE_AD-7.6 exam questions after receiving precious feedback. You can try a demo and sample of NSE5_SSE_AD-7.6 exam questions before purchasing.
Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator Sample Questions (Q24-Q29):NEW QUESTION # 24
What is a key use case for FortiSASE Secure Internet Access (SIA) in an agentless deployment? (Choose one answer)
  • A. It acts as a secure web gateway (SWG) distributing a PAC file for explicit web proxy use, securing HTTP and HTTPS traffic with a full security stack, and is ideal for unmanaged endpoints like contractors.
  • B. It distributes a PAC file to secure non-web traffic protocols and applies antivirus protection only for managed endpoints.
  • C. It requires FortiClient endpoints and supports ZTNA tags to secure all network traffic for unmanaged endpoints.
  • D. It provides secure web browsing by isolating browser sessions and enforcing data loss prevention for temporary employees.
Answer: A
Explanation:
According to theFortiSASE 7.6 Administration Guideand theFCP - FortiSASE 24/25 Administrator curriculum, the Agentless deployment mode-commonly referred to asSecure Web Gateway (SWG)mode- is a vital component of the Secure Internet Access (SIA) framework.
* Deployment Mechanism: In an agentless deployment, FortiSASE functions as an explicit web proxy.
This is achieved by distributing aPAC (Proxy Auto-Configuration) fileto the user's browser, which instructs the device to send its web traffic to the nearest FortiSASE Point of Presence (PoP).
* Target Use Case: This mode is specifically designed forunmanaged endpoints, such as those used by contractors, partners, or temporary workers, where the organization does not have the authority or capability to install the FortiClient agent.
* Security Capabilities: Even without an agent, FortiSASE applies afull security stackto the redirected traffic. This includesWeb Filtering,Anti-Malware,SSL Inspection, andInline-CASBto secure HTTP and HTTPS sessions.
* Protocol Limitations: Because it relies on proxy settings, this mode is limited to web protocols (HTTP
/HTTPS) and does not inherently secure non-web traffic like ICMP, DNS, or custom TCP/UDP applications unless they are specifically proxied.
Why other options are incorrect:
* Option A: While it provides secure browsing, session isolation (RBI) is a specific feature that can be used in either mode; the defining characteristic of the agentless use case is the proxy-based redirection for unmanaged devices.
* Option C: A PAC file can only secure web traffic (protocols that support proxying), not non-web traffic protocols.
* Option D: Agentless mode is the opposite of requiring FortiClient; ZTNA tags generally require the FortiClient agent to provide the necessary telemetry for tag evaluation.

NEW QUESTION # 25

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over HUB1-VPN1. However, the traffic is routed over HUB1-VPN3.
Based on the output shown in the exhibit, which two reasons, individually or together, could explain the observed behavior? (Choose two.)
  • A. The traffic matches a regular policy route configured with HUB1-VPN3 as the outgoing device.
  • B. HUB1-VPN3 has a lower route priority value (higher priority) than HUB1-VPN1.
  • C. HUB1-VPN1 does not have a valid route to the destination.
  • D. HUB1-VPN3 has a higher member configuration priority than HUB1-VPN1.
Answer: B,C
Explanation:
According to theSD-WAN 7.6 Core Administratorcurriculum and the diagnostic outputs shown in the exhibit, the reason traffic is steered toHUB1-VPN3instead of the expectedHUB1-VPN1(defined in SD-WAN rule ID 1) can be explained by two core routing principles in FortiOS:
* Valid Route Requirement (Option A): In thediagnose sys sdwan service 4output (which corresponds to Rule ID 1), it shows the rule has membersHUB1-VPN1,HUB1-VPN2, andHUB1-VPN3. A key principle of SD-WAN steering is that for a member to be "selectable" by a rule, itmust have a valid route to the destinationin the routing table (RIB/FIB). If the routing table output (the third section of the exhibit) shows a route to 10.0.0.0/8 viaHUB1-VPN3butnotthroughHUB1-VPN1, the SD-WAN engine will skip HUB1-VPN1 entirely because it is considered a "non-reachable" path for that specific destination.
* Policy Route Precedence (Option D): In the FortiOS route lookup hierarchy,Regular Policy Routes (PBR)are evaluatedbeforeSD-WAN rules. If an administrator has configured a traditional Policy Route (found underNetwork > Policy Routes) that matches traffic destined for 10.0.0.0/8 and specifiesHUB1- VPN3as the outgoing interface, the FortiGate will forward the packet based on that policy route and will never evaluate the SD-WAN rulesfor that session. This "bypass" occurs regardless of whether the SD- WAN rule would have chosen a "better" link.
Why other options are incorrect:
* Option B: While member configuration priority (cfg_order) is a tie-breaker in some strategies, the SD- WAN rule logic is only applied if the routing table allows it or if a higher-priority policy route doesn't intercept the traffic first.
* Option C: Lower route priority (which means higher preference in the RIB) affects theImplicit Rule (standard routing). However, SD-WAN rules are designed tooverrideRIB priority for matching traffic.
If HUB1-VPN1 was a valid candidate and no Policy Route existed, the SD-WAN rule would typically ignore RIB priority to enforce its own steering strategy.

NEW QUESTION # 26
Refer to the exhibit.

Which two statements about the Vulnerability summary dashboard in FortiSASE are correct? (Choose two.)
  • A. The dashboard allows the administrator to drill down and view CVE data and severity classifications.
  • B. Vulnerability scan is disabled in the endpoint profile.
  • C. The dashboard shows the vulnerability score for unknown applications.
  • D. Automatic vulnerability patching can be enabled for supported applications.
Answer: A,D
Explanation:
Based on theFortiSASE 7.6 (and later 2025 versions)curriculum and administration guides, the Vulnerability summary dashboard is a key component of the endpoint security posture management.
* Drill Down Capability (Option C): According to theFortiSASE Administration Guide, the Vulnerability summary widget on the Security dashboard is interactive. An administrator can click on specific risk categories (e.g., Critical, High) or application types (e.g., Operating System, Web Client) to drill down. This action opens a detailed pane showing the specific affected endpoints, associatedCVE identifiers, and severity classifications based on the CVSS standard.
* Automatic Vulnerability Patching (Option D): In theFortiSASE 7.6/2025feature sets, the endpoint profile configuration (underEndpoint > Configuration > Profiles) includes an "Automatic Patching" section. This feature allows the system to automatically install security updates for supported third- party applications and the underlying operating system (Windows/macOS) when vulnerabilities are detected. Furthermore, administrators can schedule these patches directly from theVulnerability Summarywidget by selecting specific vulnerabilities.
Why other options are incorrect:
* Option A: The dashboard categories (Operating System, Web Client, Microsoft Office, etc.) are based on known software signatures. While there is an "Other" category, the dashboard primarily provides scores for recognized applications where CVE data is available.
* Option B: The exhibit shows active data (157 total vulnerabilities), which indicates that the vulnerability scan is enabledand currently reporting data from the endpoints. If it were disabled, the widget would be empty or show zeros.

NEW QUESTION # 27
Which two delivery methods are used for installing FortiClient on a user's laptop? (Choose two.)
  • A. Download the installer directly from the FortiSASE portal.
  • B. Configure automatic installation through an API to the user's laptop.
  • C. Send an invitation email to selected users containing links to FortiClient installers.
  • D. Use zero-touch installation through a third-party application store.
Answer: A,C
Explanation:
TheFortiSASE 7.6 Administration Guideoutlines the standard onboarding procedures for deploying the FortiClientagent to remote endpoints. There are two primary user-facing delivery methods:
* Download from the FortiSASE portal (Option B):Administrators can provide users with access to the FortiSASE portal where they can directly download apre-configured installer. This installer is uniquely tied to the organization's SASE instance, ensuring the client automatically registers to the correct cloud EMS upon installation.
* Invitation Email (Option C):This is the most common administrative method. The FortiSASE portal (via its integrated EMS) allows administrators to send an invitation email to specific users or groups.
This email contains direct download links for various operating systems (Windows, macOS, Linux) and the necessary invitation code for zero-touch registration.
Why other options are incorrect:
* Option A:While third-party stores (like the App Store or Google Play) are used for mobile devices,
"zero-touch installation through a third-party store" is not the standard curriculum-defined method for laptops(Windows/macOS) in a SASE environment.
* Option D:FortiSASE does not use a direct "API to the user's laptop" for automatic installation. While MDM/GPO (centralized deployment) is supported, it is not described as an API-based auto-installation in the core curriculum.

NEW QUESTION # 28
An existing Fortinet SD-WAN customer who has recently deployed FortiSASE wants to have a comprehensive view of, and combined reports for, both SD-WAN branches and remote users. How can the customer achieve this?
  • A. Forward the logs from FortiGate to FortiSASE.
  • B. Forward the logs from the external SD-WAN FortiAnalyzer to FortiSASE.
  • C. Forward the logs from FortiSASE to the external FortiAnalyzer.
  • D. Forward the logs from FortiSASE to Fortinet SOCaaS.
Answer: C
Explanation:
For customers with hybrid environments (on-premises SD-WAN branches and remote FortiSASE users), the FortiOS 7.6andFortiSASEcurriculum recommends centralized log aggregation for unified visibility.
* Centralized Reporting:The standard architectural best practice is toforward logs from FortiSASE to an external FortiAnalyzer (Option C).
* Unified View:Since the customer's on-premises FortiGate SD-WAN branches are already sending logs to an existing FortiAnalyzer, adding the FortiSASE log stream to that sameFortiAnalyzerallows for the creation ofcombined reports.
* Fabric Integration:This setup leverages theSecurity Fabric, enabling the FortiAnalyzer to provide a single pane of glass for monitoring security events, application usage, and SD-WAN performance metrics across the entire distributed network.
Why other options are incorrect:
* Option A:SOCaaSis a managed service for threat monitoring, not a primary tool for an administrator to generate combined SD-WAN/SASE operational reports.
* Option B:FortiSASE is not designed to act as a log collector or reporting hub for external on-premises FortiGates.
* Option Data flows from the source (FortiSASE) to the collector (FortiAnalyzer), not the other way around.

NEW QUESTION # 29
......
As we all know, examination is a difficult problem for most students, but getting the test NSE5_SSE_AD-7.6 certification and obtaining the relevant certificate is of great significance to the workers. Fortunately, however, you don't have to worry about this kind of problem anymore because you can find the best solution- NSE5_SSE_AD-7.6 practice materials. With our technology and ancillary facilities of the continuous investment and research, our company's future is a bright, the NSE5_SSE_AD-7.6 study tools have many advantages, and the pass rate of our NSE5_SSE_AD-7.6 exam questions is as high as 99% to 100%.
Practice Test NSE5_SSE_AD-7.6 Fee: https://www.passleader.top/Fortinet/NSE5_SSE_AD-7.6-exam-braindumps.html
https://www.torrentvalid.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list