Using imx219 camera with thunder boot

boarsystem

799959745 Posted at 5/11/2022 09:20
A Thunder Boot is fine. But the Quick Snapshot mode has not been tried, it should also be possible ...

I have ordered the OS04A10 camera, so hopefully I can use it with Thunder Boot with or without Snapshot Mode.

Fuzzy1

Some more questions:


1.

I noticed that there are Quick Snapshot MCU firmware for imx415 (rv1126_riscv_imx415_3864_2192_SGBRG10_compact_v1.00.bin),  os04c10 (rv1126_riscv_os04c10_2688_1520_SBGGR10_compact_v1.10.bin) and sc210iot (rv1126_riscv_sc210iot_1920_1080_SBGGR10_compact_v1.00.bin) but not for OS04A10.

Is there Quick Snapshot firmware available for OS04A10?

2.

Has the document Rockchip_Developer_Guide_RV1126_RV1109_Battery_Product_EN.pdf been updated recently by Rockchip? Current version in the Firefly SDK is v1.6.1.

3.

Does additional information exist about how to program the MCU? The documentation mentions for example the directory bsp/rockchip/rv1126-riscv but I can't find a similar path in the Firefly SDK.

799959745

Fuzzy1 Posted at 5/13/2022 05:13
Some more questions:

There is no firmware for taking quick pictures. But it supports quick photo shooting. You can try it out by following the documentation first.

Fuzzy1

I read the information provided in Rockchip_Developer_Guide_RV1126_RV1109_Battery_Product_EN.pdf, but there is really no information about how to write code for the MCU.

Is there additional documentation somewhere?

Is there source files for the MCU that can be studied and compiled?

799959745

Fuzzy1 Posted at 5/14/2022 19:53
I read the information provided in Rockchip_Developer_Guide_RV1126_RV1109_Battery_Product_EN.pdf, bu ...

This part of rockchip has not released relevant information.

Fuzzy1

I found out that if I use I2C1 instead of I2C2 it works fine. So there's probably some kind of bug which prevents using I2C2 with Thunder Boot enabled.