Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Computer › EC-A3288C› Valid Test PCNSE Tips | Test PCNSE Voucher
New Topic
Print Previous Topic Next Topic

[General] Valid Test PCNSE Tips | Test PCNSE Voucher

leoford579

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133

【General】 Valid Test PCNSE Tips | Test PCNSE Voucher

Posted at yesterday 22:43      View：17 | Replies：0        Print      Only Author   [Copy Link] 1#
2026 Latest ITexamReview PCNSE PDF Dumps and PCNSE Exam Engine Free Share: https://drive.google.com/open?id=1c50hE0fsCdYapVBllxcAmbum5VFv-AJJ
Undergoing years of corrections and amendments, our PCNSE exam questions have already become perfect. They are promising practice materials with no errors. We are intransigent to the quality issue and you can totally be confident about their proficiency sternly. As indicator on your way to success, our practice materials can navigate you through all difficulties in your journey. Every challenge cannot be dealt like walk-ins, but our PCNSE simulating practice can make your review effective. That is why they are professional model in the line.
To save resources of our customers, we offer Real PCNSE Exam Questions that are enough to master for PCNSE certification exam. Our Palo Alto Networks PCNSE Exam Dumps are designed by experienced industry professionals and are regularly updated to reflect the latest changes in the Palo Alto Networks Certified Network Security Engineer Exam exam content.
100% Pass Accurate PCNSE - Valid Test Palo Alto Networks Certified Network Security Engineer Exam TipsWhy do we need so many certifications? One thing has to admit, more and more certifications you own, it may bring you more opportunities to obtain a better job, earn more salary. This is the reason why we need to recognize the importance of getting the test PCNSE certification. Our passing rate is 98%-100% and there is little possibility for you to fail in the exam. But if you are unfortunately to fail in the exam we will refund you in full immediately. Some people worry that if they buy our PCNSE Exam Questions they may fail in the exam and the procedure of the refund is complicated.
Palo Alto Networks Certified Security Engineer (PCNSE) Certification Exam is a highly sought-after certification for professionals in the cybersecurity industry. It is designed to validate the skills and knowledge of candidates in the areas of network security using the Palo Alto Networks Next-Generation Firewall. The PCNSE certification exam covers a wide range of topics, including firewall configuration, network security, advanced threat protection, and VPN technologies, among others.
The PCNSE Certification is designed to validate the skills and knowledge of security professionals who are responsible for deploying, configuring, and managing Palo Alto Networks’ next-generation firewalls. Palo Alto Networks Certified Network Security Engineer Exam certification exam covers a wide range of topics, including network security, threat prevention, VPNs, and management and troubleshooting of Palo Alto Networks devices.
PCNSE: Key DetailsThe PCNSE Exam is an 80-minute test with 75 questions, which have to be answered within the allocated time. The questions are presented in the following formats: matching, scenarios with graphics, and multiple choice. The exam is available in English and Japanese and costs $160. However, keep in mind that the prices can vary by country and depend on various factors. PCNSE is hosted by Pearson VUE that has the testing centers in major cities worldwide, but you can sit for this exam online as well.
Palo Alto Networks Certified Network Security Engineer Exam Sample Questions (Q21-Q26):NEW QUESTION # 21
A company wants to install a NGFW firewall between two core switches on a VLAN trunk link. They need to assign each VLAN to its own zone and to assign untagged (native) traffic to its own zone.
Which option differentiates multiple VLANs into separate zones?
  • A. Create VLAN objects for each VLAN and assign VLAN interfaces matching each VLAN ID. Repeat for every additional VLAN and use a VLAN ID of 0 for untagged traffic. Assign each interface/subinterface to a unique zone.
  • B. Create V-Wire objects with two V-Wire subinterfaces and assign only a single VLAN ID to the "Tag Allowed" field of the V-Wire object. Repeat for every additional VLAN and use a VLAN ID of 0 for untagged traffic. Assign each interface/subinterface to a unique zone.
  • C. Create Layer 3 subinterfaces that are each assigned to a single VLAN ID and a common virtual router.
    The physical Layer 3 interface would handle untagged traffic. Assign each interface/subinterface to a unique zone. Do not assign any interface an IP address.
  • D. Create V-Wire objects with two V-Wire interfaces and define a range of "0-4096" in the "Tag Allowed" field of the V-Wire object.
Answer: C
Explanation:
Explanation

NEW QUESTION # 22
An administrator notices interface ethernet1/2 failed on the active firewall in an active I passive firewall high availability(HA) pair.

Based on the image below, what - if any - action was taken by the active firewall when the link failed?
  • A. The active firewall failed over to the passive HA member due to an AE1 Link Group failure.
  • B. No action was taken because interface ethernet1/1 did not fail.
  • C. No action was taken because Path Monitoring is disabled.
  • D. The active firewall failed over to the passive HA member because "any" is selected for the Link Monitoring "Failure Condition".
Answer: B
Explanation:
It is set to "all", it means that all of the selected links (1/1 and 1/2) have to fail in order to failover

NEW QUESTION # 23
An administrator receives the following error message:
"IKE phase-2 negotiation failed when processing Proxy ID. Received local id 192.168 33 33/24 type IPv4 address protocol 0 port 0, received remote id 172.16 33.33/24 type IPv4 address protocol 0 port 0." How should the administrator identify the root cause of this error message?
  • A. Verify that the IP addresses can be pinged and that routing issues are not causing the connection failure
  • B. In the IKE Gateway configuration, verify that the IP address for each VPN peer is accurate
  • C. Check whether the VPN peer on one end is set up correctly using policy-based VPN
  • D. In the IPSec Crypto profile configuration, verify that PFS is either enabled on both VPN peers or disabled on both VPN peers.
Answer: C
Explanation:
Explanation
https://docs.paloaltonetworks.co ... erpret-vpn-error-me The VPN peer on one end is using policy-based VPN. You must configure a Proxy ID on the Palo Alto Networks firewall.
https://docs.paloaltonetworks.co ... erpret-vpn-error-me

NEW QUESTION # 24
Which component enables you to configure firewall resource protection settings?
  • A. DoS Protection Profile
  • B. Zone Protection Profile
  • C. QoS Profile
  • D. DoS Protection policy
Answer: A
Explanation:
https://knowledgebase.paloaltone ... =kA10g000000ClHDCA0

NEW QUESTION # 25
View the GlobalProtect configuration screen capture.

What is the purpose of this configuration?
  • A. It enables a client to perform a reverse DNS lookup on 192.168.10.1 to detect that it is an internal client.
  • B. It configures the tunnel address of all internal clients to an IP address range starting at 192.168.10.1.
  • C. It forces the firewall to perform a dynamic DNS update, which adds the internal gateway's hostname and IP address to the DNS server.
  • D. It forces an internal client to connect to an internal gateway at IP address 192.168.10.1.
Answer: A
Explanation:
Reference:
https://www.paloaltonetworks.com ... e/globalprotect-por the-globalprotect-client-authentication-configurations/define-the-globalprotect-agent-configurations
"Select this option to allow the GlobalProtect agent to determine if it is inside the enterprise network.
This option applies only to endpoints that are configured to communicate with internal gateways.When the user attempts to log in, the agent does a reverse DNS lookup of an internal host using the specified Hostname to the specified IP Address. The host serves as a reference point that is reachable if the endpoint is inside the enterprise network. If the agent finds the host, the endpoint is inside the network and the agent connects to an internal gateway; if the agent fails to find the internal host, the endpoint is outside the network and the agent establishes a tunnel to one of the external gateways"

NEW QUESTION # 26
......
Maybe you often come up with great new ideas from daydream, but you can not do anything. Do you have some trouble passing Palo Alto Networks PCNSE Exam? Turn on your computer, click ITexamReview. Then, you will find the dumps torrent you need. After you purchase our products, we provide free updates for a year. 100% guarantee to get the certification.
Test PCNSE Voucher: https://www.itexamreview.com/PCNSE-exam-dumps.html
BTW, DOWNLOAD part of ITexamReview PCNSE dumps from Cloud Storage: https://drive.google.com/open?id=1c50hE0fsCdYapVBllxcAmbum5VFv-AJJ
https://www.verifieddumps.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list