Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Computer › EC-A3399ProC› Examcollection FCSS_SDW_AR-7.4 Dumps, FCSS_SDW_AR-7. ...
New Topic
Print Previous Topic Next Topic

[General] Examcollection FCSS_SDW_AR-7.4 Dumps, FCSS_SDW_AR-7.4 Valuable Feedback

benford371

131

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
131

【General】 Examcollection FCSS_SDW_AR-7.4 Dumps, FCSS_SDW_AR-7.4 Valuable Feedback

Posted at 12 hour before      View：19 | Replies：0        Print      Only Author   [Copy Link] 1#
2026 Latest Actual4Dumps FCSS_SDW_AR-7.4 PDF Dumps and FCSS_SDW_AR-7.4 Exam Engine Free Share: https://drive.google.com/open?id=1ojIC25296ofkcd5UL4wZj4yyl0zWe4pt
We also fully consider the characteristics of the user on studying the FCSS_SDW_AR-7.4 exam questions. For example, many people who choose to obtain a FCSS_SDW_AR-7.4 certificate don't have a lot of time to prepare for the exam. Based on this point, our team of experts really took a lot of thought in the layout of the content. The contents of FCSS_SDW_AR-7.4 Exam Materials are carefully selected by experts. We hope you can get the most effective knowledge in the shortest possible time.
Fortinet FCSS_SDW_AR-7.4 Exam Syllabus Topics:
TopicDetails
Topic 1
  • SD-WAN Configuration: This section of the exam measures the skills of network engineers and covers configuring a basic SD-WAN setup. Candidates are expected to demonstrate their ability to define SD-WAN members and zones effectively, ensuring foundational network segmentation and management.
Topic 2
  • Centralized Management: This domain evaluates network administrators’ competence in deploying and managing SD-WAN configurations centrally using FortiManager. It includes tasks such as implementing branch configurations and utilizing overlay templates to streamline network management.
Topic 3
  • Advanced IPsec: Intended for security engineers, this section covers the deployment of advanced IPsec topologies for SD-WAN, including hub-and-spoke models, ADVPN configurations, and complex multi-hub or multi-region deployments. Candidates need to demonstrate expertise in securing wide-area networks using IPsec technologies.
Topic 4
  • SD-WAN Troubleshooting: This part assesses the troubleshooting skills of network support specialists. Candidates should be able to diagnose and resolve issues related to SD-WAN rules, session behaviors, routing inconsistencies, and ADVPN connectivity problems to maintain seamless network operations.

FCSS - SD-WAN 7.4 Architect exam training dumps & FCSS_SDW_AR-7.4 free latest pdf & FCSS - SD-WAN 7.4 Architect latest torrent vceIf you study with our FCSS_SDW_AR-7.4 exam questions, you are bound to get the certification. The scientific design of FCSS_SDW_AR-7.4 preparation quiz allows you to pass exams faster, and the high passing rate will also make you more at ease. In this age of anxiety, being able to meet such a product is really fortunate for you. Choosing FCSS_SDW_AR-7.4 training engine will make you feel even more powerful. You can improve your ability more easily. When others work hard, you are already ahead!
Fortinet FCSS - SD-WAN 7.4 Architect Sample Questions (Q46-Q51):NEW QUESTION # 46
Refer to the exhibit that shows event logs on FortiGate. Based on the output shown in the exhibit, what can you say about the tunnels on this device?

  • A. The VPN tunnel HUB1-VPN1_0 is a shortcut tunnel.
  • B. There is one shortcut tunnel built from master tunnel VPN4.
  • C. The device steers voice traffic through the VPN tunnel HUB1-VPN3.
  • D. The master tunnel HU82-VPN3 cannot accept ADVPN shortcuts.
Answer: A
Explanation:
The "advpnsc" log field indicates whether a VPN event is based on an ADVPN shortcut. A value of "1" indicates the tunnel is an ADVPN shortcut, and "0" indicates it is not.
In the event logs, the log entry with "vpntunnel="HUB1-VPN1_0"" shows "advpnsc=1", which signifies that HUB1-VPN1_0 is a shortcut tunnel.
https://docs.fortinet.com/docume ... -field-to-identify- advpn-shortcuts-in-vpn-logs

NEW QUESTION # 47
Refer to the exhibit, which shows the SD-WAN rule status and configuration. Based on the exhibit, which change in the measured packet loss will make HUB1-VPN3 the new preferred member?

  • A. When HUB1-VPN3 has 4% packet loss
  • B. When HUB1-VPN1 has 12% packet loss
  • C. When HUB1-VPN1 has 4% packet loss
  • D. When all three members have the same packet loss
Answer: B
Explanation:
The SD-WAN rule is in priority mode, and the current priority-members are set as 6 4 5, which means:
- 1st priority: HUB1-VPN3 (seq 6)
- 2nd priority: HUB1-VPN1 (seq 4)
- 3rd priority: HUB1-VPN2 (seq 5)
Currently, HUB1-VPN1 is selected (even though it's not the first in priority) because its packet loss (2%) is better than the higher-priority VPN3 (12%).
FortiGate will prefer a higher-priority member only if its link cost (here, packet loss) is below the link-cost-threshold, which is set to 0.
So, for HUB1-VPN3 to become the new preferred member, all higher-priority members (VPN1 and VPN2) must have equal or higher packet loss than VPN3.
If HUB1-VPN1 increases to 12% packet loss, equal to VPN3, then FortiGate will select VPN3 (priority 6) due to its higher configured priority.

NEW QUESTION # 48
Refer to the exhibits.


The exhibits show the SD-WAN zone configuration of an SD-WAN template prepared on FortiManager and the policy package configuration.
When the administrator tries to install the configuration changes, FortiManager fails to commit.
What should the administrator do to fix the issue?
  • A. Configure branch1_fgt as the installation target for policy 3.
  • B. Configure HUB1 as the destination of policy 3.
  • C. Configure a normalized interface for the IPsec tunnel HUB1-VPN1.
  • D. Configure both HUB1-VPN1 and HUB1-VPN2 as the destination of policy 3
Answer: B
Explanation:
Policy 3 points traffic To = HUB1-VPN1, which is an SD-WAN member interface. In SD-WAN you must reference the SD-WAN zone (the logical interface) in policies, not its member tunnels. Change the policy's To interface to the zone HUB1, and the install will succeed.

NEW QUESTION # 49
You configured an SD-WAN rule with the best quality strategy and selected the predefined health check, Default_FortiGuard, to check the link performances against FortiGuard servers.
For the quality criteria, you selected Custom-profile-1.
Which factors does FortiGate use, and in which order. to determine the link that it should use to steer the traffic?
  • A. Latency - Member configuration order - Link cost threshold
  • B. Link quality index - Member configuration order - Link cost threshold
  • C. Links that meet the SLA targets - Member configuration order - Member local cost
  • D. Latency - Jitter - Packet loss - Bibandwidth - Member configuration order
Answer: C
Explanation:
With the Best Quality strategy, FortiGate first checks which links meet the SLA targets defined in the selected performance SLA (in this case, Custom-profile-1). Among those qualified links, FortiGate then uses the member configuration order to decide preference. If multiple links still qualify, it finally considers the member local cost to select the best path.

NEW QUESTION # 50
You have configured the performance SLA with the probe mode as Prefer Passive.
What are two observable impacts of this configuration? (Choose two.)
  • A. FortiGate can offload the traffic that is subject to passive monitoring to hardware.
  • B. After FortiGate switches to active mode, the SLA performance rule falls back to passive monitoring after 3 minutes.
  • C. During passive monitoring, the SLA performance rule cannot detect dead members.
  • D. FortiGate passively monitors the member if TCP traffic is passing through the member.
  • E. FortiGate passively monitors the member if ICMP traffic is passing through the member.
Answer: D,E
Explanation:
FortiGate passively monitors the member if TCP traffic is passing through the member → With Prefer Passive mode, FortiGate inspects existing traffic (like TCP flows) to measure performance metrics without generating its own probes.
FortiGate passively monitors the member if ICMP traffic is passing through the member → Similarly, when ICMP flows exist, FortiGate uses them for SLA checks.

NEW QUESTION # 51
......
No matter you are exam candidates of high caliber or newbies, our Fortinet FCSS_SDW_AR-7.4 exam quiz will be your propulsion to gain the best results with least time and reasonable money. Not only because the outstanding content of Fortinet FCSS_SDW_AR-7.4 Real Dumps that produced by our professional expert but also for the reason that we have excellent vocational moral to improve our Fortinet FCSS_SDW_AR-7.4 learning materials quality.
FCSS_SDW_AR-7.4 Valuable Feedback: https://www.actual4dumps.com/FCSS_SDW_AR-7.4-study-material.html
DOWNLOAD the newest Actual4Dumps FCSS_SDW_AR-7.4 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1ojIC25296ofkcd5UL4wZj4yyl0zWe4pt
https://www.koreadumps.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list