Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › iCore-3568JQ› Pass Guaranteed Quiz F5 - F5CAB4–Reliable Braindump ...
New Topic
Print Previous Topic Next Topic

[General] Pass Guaranteed Quiz F5 - F5CAB4–Reliable Braindumps Torrent

henryjo519

135

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
135

【General】 Pass Guaranteed Quiz F5 - F5CAB4–Reliable Braindumps Torrent

Posted at 4 hour before      View：15 | Replies：0        Print      Only Author   [Copy Link] 1#
It is difficult to get the F5CAB4 certification for you need have extremely high concentration to have all test sites in mind. Our F5CAB4 learning questions can successfully solve this question for the content are exactly close to the changes of the real exam. When you grasp the key points, nothing will be difficult for you anymore. Our professional experts are good at compiling the F5CAB4 training guide with the most important information. Believe in us, and your success is 100% guaranteed!
F5 F5CAB4 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Identify and report current device status: This domain covers monitoring BIG-IP operational status through LCD panels, dashboards, Network Map, GUI
  • TMSH commands, and checking high availability states.
Topic 2
  • Apply procedural concepts required to create, manage, and restore a UCS archive: This domain covers UCS backup and restore procedures, understanding backup use cases, proper storage practices, and UCS file contents including private keys.
Topic 3
  • Given a scenario, determine device upgrade eligibility: This domain covers determining appropriate timing for software and platform upgrades and strategies to minimize downtime during upgrades.
Topic 4
  • Identify management connectivity configurations: This section focuses on understanding management access configurations, including management IP addresses, port lockdown settings, remote connectivity verification, and troubleshooting access issues.
Topic 5
  • Explain authentication methods: This section focuses on user management including creating
  • modifying users, configuring remote authentication providers, and implementing group-based access control.
Topic 6
  • Given a scenario, interpret Service status: This section teaches interpreting service states, analyzing netstat output, and determining whether services are listening on specific ports.
Topic 7
  • Apply procedural concepts required to manage the state of a high availability pair: This domain covers controlling and monitoring failover states in high availability pairs, including forcing standby
  • offline modes, reporting failover status, and verifying device trust.
Topic 8
  • Identify configured system services: This domain covers verifying proper configuration of essential services including DNS, NTP, SNMP, and syslog.

100% Pass Quiz F5 - Updated F5CAB4 - BIG-IP Administration Control Plane Administration Braindumps TorrentNo one lose interest during using our F5CAB4 actual exam and become regular customers eventually. With free demos to take reference, as well as bountiful knowledge to practice, even every page is carefully arranged by our experts, our F5CAB4 Exam Materials are successful with high efficiency and high quality to navigate you throughout the process. If you pay attention to using our F5CAB4 practice engine, thing will be solved easily.
F5 BIG-IP Administration Control Plane Administration Sample Questions (Q24-Q29):NEW QUESTION # 24
An organization is performing a major release upgrade to its BIG-IP system. The system is under medium load and has enough disk space to perform the upgrade.
Which pre-upgrade task is disruptive to regular system performance and should be performed during a maintenance window? (Choose one answer)
  • A. Generate a UCS
  • B. Create a QKView
  • C. tmsh save sys config
  • D. Reactivate the license
Answer: D
Explanation:
Reactivating a BIG-IP license is a traffic-disruptive operation. During the license reactivation process, the BIG-IP system performs a configuration reload, which results in a temporary interruption of all traffic processing. Because traffic handling is affected, F5 explicitly recommends scheduling license updates during a maintenance window.
This behavior is documented in F5 Knowledge Base articles, which state that license reactivation impacts traffic and must be planned accordingly during upgrades or system changes.
The other options are not considered disruptive:
* Creating a QKView is primarily a diagnostic task and does not interrupt traffic.
* Running tmsh save sys config only saves the running configuration to disk.
* Generating a UCS is resource-intensive but does not reload configuration or interrupt traffic processing.

NEW QUESTION # 25
A BIG-IP Administrator needs to load a UCS file but must exclude the license file.
How should the administrator perform this task? (Choose one answer)
  • A. From the CLI with command tmsh load /sys ucs <ucs filename> no-license
  • B. From the GUI, select the UCS file, uncheck the license box, and click Restore
  • C. From the CLI with command tmsh load /sys ucs <ucs filename>
  • D. From the GUI, select the UCS file and click Restore
Answer: A
Explanation:
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Administration documents:
When restoring a User Configuration Set (UCS) file, BIG-IP allows administrators to selectively exclude the license during the restore process. From the CLI, this is accomplished using the no-license option with the tmsh load /sys ucs command.
The command:
tmsh load /sys ucs <ucs filename> no-license
restores:
System configuration
Certificates and keys
Device and traffic objects
while explicitly excluding the license file, which is required when:
Migrating configurations between devices
Restoring to hardware with a different license
Avoiding license conflicts or overwrites
Why the other options are incorrect:
A does not provide the option to exclude the license.
B restores the UCS including the license, which does not meet the requirement.
D is incorrect because the BIG-IP GUI does not provide a checkbox to exclude the license during UCS restore.
Therefore, the correct and supported method is C.

NEW QUESTION # 26
A BIG-IP administrator is troubleshooting inconsistent configuration objects on devices in a device group.
The administrator uses the command:
tmsh run /cm watch-devicegroup-device
and observes the following output:
devices <devgroup> device clu_id cl_orig cl_time last_sync
20:21 sync_test bigip_a 3273 bigip_a 14:27:00
20:21 sync_test bigip_b 1745 bigip_b 13:52:34 13:42:04
20:21 sync_test bigip_c 1745 bigip_a 13:52:34 13:42:04
What two conclusions can be made about this output? (Choose two answers)
  • A. bigip_a has the latest configuration.
  • B. The correct configuration exists on bigip_b and bigip_c because their cluster times match.
  • C. Two of the devices in the device group have a configuration that is out of date.
  • D. The config from bigip_c was synced to the other devices in the device group during the most recent ConfigSync.
  • E. The correct configuration exists on bigip_a and bigip_c because their cluster times match.
Answer: A,C
Explanation:
watch-devicegroup-device shows (among other columns) the commit ID (cid.id / shown here as clu_id), the originating device for that commit (cid-orig / shown here as cl_orig), and the time the configuration change was made (cid.time / shown here as cl_time). The highest/newest commit ID and its time represent the most recent configuration change seen among the devices. (clouddocs.f5.com)
* bigip_a has the latest configuration (A) because it shows commit ID 3273 at 14:27:00, which is newer than commit ID 1745 at 13:52:34 on bigip_b and bigip_c. (clouddocs.f5.com)
* Two devices are out of date (B) because bigip_b and bigip_c are still on the older commit ID 1745, so they do not match the latest commit shown on bigip_a. (clouddocs.f5.com) Why the other options are not supported by this output:
* C is not supported: bigip_c is not showing a newer commit than the others; it's on the older commit (1745), so it's not the source of the most recent change. The output's cid-orig column is what tells you where the change was made. (clouddocs.f5.com)
* D/E are incorrect logic: matching cid.time between two devices only indicates they share the same change timestamp/commit, not that it is the correct or latest configuration. The "latest" is indicated by the newest commit ID/time (here, bigip_a). (clouddocs.f5.com)

NEW QUESTION # 27
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Utility and navigates to Device Management > Traffic Group. However, "Force to Standby" is greyed out.
What is causing this issue?
  • A. The BIG-IP Administrator is NOT logged into command line to tail over
  • B. The BIG-IP Administrator is logged in as administrator
  • C. The BIG-IP Administrator is logged in as root
  • D. The BIG-IP Administrator is on the Standby Device
Answer: D
Explanation:
In a High Availability pair, the "Force to Standby" action is a Control Plane command used to trigger a manual failover. This option is only logical and available on the device that is currently in the Active state. If the button is greyed out, it indicates that the administrator is already logged into the Standby unit, which has no active traffic groups to relinquish.

NEW QUESTION # 28
The BIG-IP Administrator has modified an iRule on one device of an HA pair. The BIG-IP Administrator notices there is NO traffic on the BIG-IP device in which they are logged into. What should the BIG-IP Administrator do to verify if the iRule works correctly?
  • A. Push configuration from this device to the group and start to monitor traffic on this device
  • B. Pull configuration to this device to the cluster and start to monitor traffic on this device
  • C. Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device
  • D. Log in to the other device in the cluster, push configuration from it, and start to monitor traffic on that device
Answer: C
Explanation:
Comprehensive and Detailed Explanation From BIG-IP Administration Control Plane Adminis44tration documents: In a45n Active/Standby HA pair, application traffic only flows through the Active device. If an administrator makes a change on the Standby device (which has no traffic), they must synchronize the configuration to the Active device to test it. The procedural step is to log into the Active device and "pull" the configuration from the Standby device (or push from Standby) so the Active device can process traffic using the new iRule

NEW QUESTION # 29
......
If you really intend to pass the F5CAB4 exam, our software will provide you the fast and convenient learning and you will get the best study materials and get a very good preparation for the exam. The content of the F5CAB4 guide torrent is easy to be mastered and has simplified the important information. What’s more, our F5CAB4 prep torrent conveys more important information with less questions and answers. The learning is relaxed and highly efficiently.
Reliable F5CAB4 Exam Dumps: https://www.prep4away.com/F5-certification/braindumps.F5CAB4.ete.file.html
https://www.kaoguti.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list