Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Computer › IPC-M10R800-A3288C› HPE7-A07 Actual Real Exam & HPE7-A07 Test Question ...
New Topic
Print Previous Topic Next Topic

[General] HPE7-A07 Actual Real Exam & HPE7-A07 Test Questions & HPE7-A07 Dumps Tor

mattgre149

132

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
132

【General】 HPE7-A07 Actual Real Exam & HPE7-A07 Test Questions & HPE7-A07 Dumps Tor

Posted at before yesterday 16:31      View：4 | Replies：0        Print      Only Author   [Copy Link] 1#
BTW, DOWNLOAD part of Test4Sure HPE7-A07 dumps from Cloud Storage: https://drive.google.com/open?id=1zUg34BbbNdKcR6_47bquyZxPI5TdJ4z2
If you want to get a good job, and if you are not satisfied with your present situation, if you long to have a higher station in life. We think it is high time for you to try your best to gain the HPE7-A07 certification. Having our study materials, it will be very easy for you to get the certification in a short time. If you try purchase our study materials, you will find our HPE7-A07 question torrent will be very useful for you. We are confident that you will be attracted to our HPE7-A07 guide question.
HP HPE7-A07 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Troubleshooting: This topic of the HP HPE7-A07 exam assesses skills of a senior HP RF network engineer in troubleshooting. It also assesses the ability to remediate issues in campus networks. It is vital for ensuring network reliability and minimizing downtime in critical environments.
Topic 2
  • Authentication
  • Authorization: Senior HP RF network engineers are tested on their skills in designing and troubleshooting AAA configurations, including ClearPass integration. This ensures that network access is securely managed according to the customer's requirements.
Topic 3
  • Network Resiliency and Virtualization: This section of the Aruba Certified Campus Access Mobility Expert Written exam assesses the expertise of a senior HP RF network engineer in designing and troubleshooting mechanisms for resiliency, redundancy, and fault tolerance. It is crucial for maintaining uninterrupted network services.
Topic 4
  • WLAN: This HP HPE7-A07 Exam Topic tests the ability of a senior RF network engineer to design and troubleshoot RF attributes and wireless functions. It also includes building and troubleshooting wireless configurations, critical for optimizing WLAN performance in enterprise environments.
Topic 5
  • Network Stack: This topic of the HP HPE7-A07 exam evaluates the ability of a senior HP RF network engineer to analyze and troubleshoot network solutions based on customer issues. Mastery of this ensures effective problem resolution in complex network environments.

Free PDF Perfect HP - HPE7-A07 - Aruba Certified Campus Access Mobility Expert Written Exam Pass4sure Exam PrepWe have a lasting and sustainable cooperation with customers who are willing to purchase our HPE7-A07 actual exam. We try our best to renovate and update our HPE7-A07 study materials in order to help you fill the knowledge gap during your learning process, thus increasing your confidence and success rate. At the same time, HPE7-A07 Preparation baindumps can keep pace with the digitized world by providing timely application. You will never fell disappointed with our HPE7-A07 exam quiz.
HP Aruba Certified Campus Access Mobility Expert Written Exam Sample Questions (Q35-Q40):NEW QUESTION # 35
A customer's infrastructure is set up to use both primary and secondary gateway clusters on the SSID profile based on best practices. Why do they have an equal split of their 144 APs across the primary and secondary gateway clusters?
  • A. The primary and secondary gateway clusters are up, but the cluster preemption is not enabled.
  • B. The secondary gateway cluster is a homogeneous cluster with six nodes.
  • C. The secondary gateway cluster is a heterogeneous cluster with four nodes.
  • D. The primary and secondary gateway clusters are up, and the cluster preemption is enabled.
Answer: A
Explanation:
Comprehensive and Detailed Explanation (Verified Extract from HPE Aruba Networking AOS-10 Gateway and Cluster Design Documentation) When primary and secondary gateway clusters are defined in an SSID profile in AOS-10, the Access Points (APs) dynamically distribute their tunnel termination sessions based on the availability of both clusters.
If both clusters are operational and cluster preemption is not enabled, the APs maintain their current session distribution, resulting in an approximately equal split of AP tunnels across both clusters.
Aruba Documentation Extract:
"When both primary and secondary gateway clusters are reachable and cluster preemption is disabled, APs remain distributed across both clusters to maintain balance and prevent disruption."
"Cluster preemption, if enabled, causes APs associated with the secondary cluster to move back to the primary cluster once it becomes available, consolidating tunnel load." Thus:
* The equal split (72 APs per cluster) indicates both clusters are active,
* and cluster preemption is disabled (so APs remain distributed instead of failing back to the primary cluster).
Why the Other Options Are Incorrect:
* A. Cluster homogeneity/heterogeneity does not influence AP distribution behavior.
* B. If preemption were enabled, APs on the secondary cluster would fail back to the primary, not stay split.
* D. The number of nodes does not determine AP load balancing or distribution.
# Final Verified answer: C. The primary and secondary gateway clusters are up, but the cluster preemption is not enabled.
# Reference Sources (HPE Aruba Official Materials):
* Aruba AOS-10 Gateway Clustering and Redundancy Guide - AP Distribution and Preemption
* Aruba Central Network Design Guide - SSID Profile Gateway Assignment Behavior
* Aruba Certified Mobility Expert (ACMX) Study Guide - Gateway Clustering and Failover Logic

NEW QUESTION # 36
An AOS-10 multi-site deployment has sites with AP-only bridged SSIDs and other sites with APs and gateways operating tunneled SSIDs. Client session state sync errors exist between secure lab environments and public-facing areas at several sites.
What is causing the issues?
  • A. The sites with issues are the overlay AP with gateway sites because the connection to HPE Aruba Networking Central is interrupted.
  • B. The affected clients are associated with an SSID with 11r and 11k disabled.
  • C. The sites with issues are the AP-only deployments because the connection to HPE Aruba Networking Central is interrupted.
  • D. The DTLS connections are down between APs in the lab and APs in public areas.
Answer: D
Explanation:
* In AOS-10, client session/state synchronization for seamless roaming relies on a secure DTLS control channel between the devices that hold client state.
* In AP-only (bridged) sites, APs synchronize session/PMK state AP-to-AP over DTLS within the site.
* In tunneled SSID sites, the gateway cluster synchronizes client state among its members; APs still maintain DTLS control sessions for coordination.
* If security boundaries (e.g., firewall rules separating lab and public areas) block DTLS between those APs/segments, session state cannot sync, and the system reports state-sync errors, exactly as observed.
* This is independent of Central connectivity and not caused by 11r/11k being disabled; the error specifically indicates control-plane (DTLS) reachability problems between the APs in those areas.
References: Aruba AOS-10 Multi-Site and Roaming design guidance-DTLS control connections required for client session/state synchronization across APs and between APs and gateways.

NEW QUESTION # 37
A customer's infrastructure is set up to use both primary and secondary gateway clusters on the SSID profile based on best practices What is a valid cause tor having an equal spirt in APs connected to the primary and secondary gateway clusters?
  • A. The secondary gateway cluster is homogeneous
  • B. The primary gateway cluster is up. out some APs are unable to reach the primary gateway cluster. These APs would connect to the secondary gateway cluster
  • C. The primary gateway cluster is up. out some APs cannot reach the secondary gateway cluster. These APs would connect to the secondary gateway cluster
  • D. The secondary gateway cluster is heterogeneous
Answer: B
Explanation:
In a high availability setup where both primary and secondary gateway clusters are present, APs are typically designed to connect to the primary cluster. If the APs are equally split between the primary and secondary, this may indicate that some APs cannot reach the primary cluster due to connectivity issues or reachability constraints, thus falling back to the secondary cluster.

NEW QUESTION # 38
in a WLAN network with a tunneled SSID. you see the following events in HPE Aruba Networking Central:

The customer asks you to investigate log messages What should you tell them?
  • A. This indicates a security issue. The client with a MAC address ending with 37 18;0d Is performing a Denial-of-Service attack on your network. You should track down the client and remove it from the network.
  • B. This is normal, expected behavior. No further actions are needed.
  • C. This indicates a client WLAN driver issue for the client with a MAC address ending with 37:18
    :Od. You should upgrade the client WLAN driver.
  • D. There is a roaming issue Enable Fast Roaming 802.11r and OKC to resolve the issue.
Answer: B
Explanation:
The event log showing PMK (Pairwise Master Key) and OKC (Opportunistic Key Caching) key add/update and delete operations is indicative of normal client behavior in a WLAN environment. These events are part of the standard process for maintaining client session security and do not necessarily indicate any issue.

NEW QUESTION # 39
A BGP routing table contains multiple routes to the same destination prefix.
Referring to the table below, which route would be marked with a ">" symbol?

  • A. A
  • B. E
  • C. C
  • D. B
  • E. D
Answer: B
Explanation:
The Aruba AOS-CX BGP Best Path Selection Process determines which route becomes the active (>) route in the BGP routing table.
This process is consistent with RFC 4271 but detailed in HPE's Aruba AOS-CX Routing Guide and ACSP Study Guide - BGP and Dynamic Routing.
Extract 1 - BGP Path Selection Hierarchy (Aruba AOS-CX Routing Guide)
"When multiple BGP routes exist to the same destination, the router uses the following decision sequence to select the best path:
* Highest LOCAL_PREFERENCE
* Lowest AS_PATH length
* Lowest ORIGIN type (IGP 'i' preferred over EGP 'e', preferred over Incomplete '?')
* Lowest MULTI_EXIT_DISC (MED) if received from the same AS
* Lowest IGP cost to the next hop (closest exit)
* Lowest BGP router ID as tie-breaker."
Extract 2 - Aruba Certified Switching Professional (ACSP) Study Guide - BGP Path Decision
"Local Preference is the first and most significant criterion within a single AS.
A higher Local Preference value indicates a preferred exit.
If multiple routes have equal Local Preference, the router compares their Origin Codes.
An Origin Code of 'i' (IGP) is preferred over '?' (Incomplete).
If still tied, the route with the lowest IGP cost to the next-hop is chosen as best." Step-by-Step Application to the Table Step 1 - Local Preference
* Routes B, D, and E have Local Preference = 100
* Routes A and C have Local Preference = 0
# Routes A and C are eliminated.
Remaining candidates: B, D, E
Step 2 - Origin Code
* D and E: Origin Code = i (IGP) # Preferred
* B: Origin Code = ? (Incomplete) # Less preferred
# Eliminate B
Remaining candidates: D, E
Step 3 - MED / Metric
Both D and E have Metric = 0 # Still tied
Step 4 - IGP Cost / Administrative Distance
* D: Distance = 200
* E: Distance = 20
According to ArubaOS-CX:
"When all BGP attributes are equal, the route with the lowest internal cost (shortest IGP distance) to the next-hop is selected."
# E wins because it has a lower distance (20 < 200)
Extract 3 - ArubaOS-CX Routing Reference
"The route that wins the selection process is marked with a '>' symbol in the routing table.
This route is installed in the forwarding table and used for traffic forwarding." Final Explanation
* Route E has:
* Highest Local Preference (100)
* Best Origin (IGP 'i')
* Lowest IGP distance (20)
Hence, Route E is selected as the best path, and the ">" symbol is placed beside it in the BGP routing table.
# Final Verified answer: E
# Official Aruba Documentation References:
* Aruba AOS-CX Routing Guide - Section: BGP Best Path Selection Criteria
* Aruba Certified Switching Professional (ACSP) Study Guide - Module: BGP and Path Selection Logic
* Aruba AOS-CX Configuration and Management Guide - Command: show ip bgp summary / route selection

NEW QUESTION # 40
......
It is a truth universally acknowledged that there are more and more people in pursuit of the better job and a better life in the competitive world, especially these people who cannot earn a nice living. A lot of people has regard passing the HPE7-A07 exam as the best and even only one method to achieve their great goals, because they cannot find the another method that is easier than the exam to help them to make their dreams come true, and more importantly, the way of passing the HPE7-A07 Exam can help them save a lot of time. So a growing number of people have set out to preparing for the exam in the past years in order to gain the higher standard life and a decent job. As is known to us, the exam has been more and more difficult for all people to pass, but it is because of this, people who have passed the HPE7-A07 exam successfully and get the related certification will be taken seriously by the leaders from the great companies.
Test HPE7-A07 Question: https://www.test4sure.com/HPE7-A07-pass4sure-vce.html
BTW, DOWNLOAD part of Test4Sure HPE7-A07 dumps from Cloud Storage: https://drive.google.com/open?id=1zUg34BbbNdKcR6_47bquyZxPI5TdJ4z2
https://www.pass4surecert.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list