Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Computer › IPC-M10R800-A3399C› HPE7-A06問題トレーリング、HPE7-A06合格問題
New Topic
Print Previous Topic Next Topic

[General] HPE7-A06問題トレーリング、HPE7-A06合格問題

johnree759

127

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
127

【General】 HPE7-A06問題トレーリング、HPE7-A06合格問題

Posted at yesterday 05:47      View：7 | Replies：0        Print      Only Author   [Copy Link] 1#
さらに、MogiExam HPE7-A06ダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1Ar3-YBdGzgLV52nV1mkabR2ErPTyJ8aL
大量の時間と金銭をかかるのに比べて、正しい仕方は肝心なことです。もしあなたはHP　HPE7-A06試験に準備しているなら、あんたのための整理される備考資料はあなたにとって最善のオプションです。我々の目標はあなたに試験にうまく合格させることです。弊社の誠意を信じてもらいたいし、HP　HPE7-A06試験2成功するのを祈って願います。
ソフトウェアバージョンは、HPE7-A06試験準備の3つのバージョンの1つです。ソフトウェアバージョンには、他のバージョンとは異なる多くの機能があります。一方、HPE7-A06テスト問題のソフトウェアバージョンは、すべてのユーザーの実際の試験をシミュレートできます。テスト環境を実際にシミュレートすることにより、学習コースで自己欠陥を学び、修正する機会が得られます。一方、オペレーティングシステムでHPE7-A06トレーニングガイドのソフトウェアバージョンを適用することはできますが。
試験の準備方法-100％合格率のHPE7-A06問題トレーリング試験-素晴らしいHPE7-A06合格問題HPE7-A06試験には多くの利点があり、HP購入する価値があります。購入前にHPE7-A06ガイドの質問デモをダウンロードして試用し、支払いが完了したらすぐに使用できます。支払いが完了したら、5〜10分以内に送信します。その後、あなたはそれを学び、実践することができます。HPE Campus Access Switching Expert Written Exam試験に合格するための最新のHPE7-A06試験問題があることを確認するために、HPE7-A06トレント質問を頻繁に更新します。 HPE7-A06試験に合格すると、大企業に入社して賃金を2倍にすることができます。
HPE Campus Access Switching Expert Written Exam 認定 HPE7-A06 試験問題 (Q95-Q100):質問 # 95
Refer to the exhibit and cede sample.

What is the effect when you add thestatement "neighbor 10.2.0.3 send-community both" to the ipv4 address family? (Select two.)
  • A. The feature will be enabled without consequence to the R1established session with R2.
  • B. It causes R1to negotiate for the ability to import and export all type-1 and lype-2 communities with R2.
  • C. It causes R1 to negotiate the ability to send and receive standard and extended communities with R2.
  • D. Itcauses R1to allow the exchange ofcommunities with NLRI records in both inbound and outbound direction
  • E. It will cause existing BGP peering between R1and R2 to flap.
正解：C、E
解説：
The question asks for the effects of adding the command neighbor 10.2.0.3 send-community both to the BGP configuration under the IPv4 address family context for neighbor R2 (10.2.0.3) on router R1.
* send-community both:This command instructs R1 to send both standard (RFC 1997) and extended (RFC 4360) BGP community attributes to neighbor R2. By default, communities are not sent.
* BGP Capability Negotiation:Adding or changing features like community advertisement modifies the BGP capabilities exchanged between neighbors during session establishment. Any change to these capabilities requires the BGP session to be reset (flap) so that the peers can renegotiate using the new capabilities.
* Analysis of Options (Select Two):
* A: Correct (partially). It enables R1 tosendstandard and extended communities. The ability to receivedepends on the peer and local config. The capability isnegotiatedupon session reset.
* B: Incorrect. Changing capabilities requires the session to flap; it's not without consequence.
* C: Incorrect. It primarily enablesoutboundsending from R1. Inbound acceptance is implicit if the neighbor is activated.
* D: Correct. Modifying BGP neighbor capabilities, such as enabling send-community, necessitates a BGP session reset (flap) for the change to take effect.
* E: Incorrect terminology ("import/export", "type-1/type-2 communities").
* Conclusion:The command enables R1 to send communities (A describes the purpose/capability), and adding this command to an existing session will cause the session to flap for renegotiation (D describes the immediate consequence).
References:RFC 1997, RFC 4360, AOS-CX BGP Configuration Guide (communities, neighbor configuration). This relates to the "Routing" (16%) objective.

質問 # 96
Refer to the exhibit.

A gateway cluster needs to be connected to the VSX-enabled switches where MC-LAG is configured What Is a possible constraint?
  • A. lacp mode active needs to be configured on the gateways when usingstatic-activate" mode.
  • B. LACP is not supported during the initial provisioning and needs to be turned off.
  • C. LLDP needs to be enabled to detect LACP-configured interfaces.
  • D. The command lacp fallback is missing on the interface lag level.
正解：B
解説：
The question asks about a possible constraint when connecting an Aruba Gateway Cluster to upstream VSX switches using an MC-LAG.
* Scenario:Gateway Cluster acts as a single logical device forming an LACP LAG. The VSX switches are configured with MC-LAG, allowing the gateway cluster to bundle links across the two physical VSX switches.
* LACP & Initial ProvisioningACP requires negotiation (exchange of LACP PDUs) between both ends of the link bundle to activate the LAG. During initial gateway provisioning (ZTP, OTP), the gateway might be in a minimal state without its full configuration, including LACP parameters. If the VSX switch ports are configured strictly for LACP active mode, the LAG might not form until the gateway is fully provisioned and running LACP. This lack of connectivity during provisioning is a constraint.
* Analysis of Options:
* A: lacp mode active is standard, but the issue is during provisioning, not runtime mode choice.
"static-activate" is unrelated.
* B: Theabsenceof lacp fallback could be the constraint. Fallback allows connectivity if LACP doesn't establish, which is useful during provisioning.
* C: LLDP is not required for LACP.
* D: Correctly identifies the constraint: Standard LACP required by the switch might not be supported or active on the gateway during its initial provisioning phase, potentially hindering the setup process. Workarounds like disabling LACP or enabling LACP fallback on the switch ports during this phase are often necessary.
* ConclusionACP incompatibility during the initial provisioning phase of the gateway cluster is a common constraint when connecting to switches requiring LACP for the LAG.
References:Aruba Gateway Installation Guides, AOS-CX MC-LAG Configuration Guide, LACP Standard (IEEE 802.3ad). This relates to "Connectivity" (9%) and "Network Resiliency and virtualization" (8%).

質問 # 97
Drag and Drop Question
Match the customer requirement with the relevant commands.

正解：
解説：


質問 # 98
Ever since a recent firewall change at your WAN/lnternet edge, the 8GP state in your VSX pair has not returned to Established. What should you check to restore BGP functionality at the site?
  • A. Confirm that appropriate TCP ports are still allowed.
  • B. Restart the routing service so thatBGP auto-discovers its neighbors.
  • C. Confirm that BGP Peer AS has not changed.
  • D. Restart NAT service for the BGP interface.
正解：A
解説：
The BGP state on a VSX pair is stuck (not 'Established') after a recent firewall change at the WAN/Internet edge, where the BGP peering likely occurs.
* BGP and Firewalls:BGP establishes sessions usingTCP port 179. Firewalls located between BGP peers must explicitly permit TCP port 179 traffic bidirectionally for the peering to establish and maintain. Firewall changes are a frequent cause of broken BGP sessions.
* Troubleshooting Steps After Firewall Change:The most logical first step is to verify that the firewall change did not inadvertently block TCP port 179 between the configured BGP neighbor IP addresses.
* Analysis of Options:
* A: Restarting routing service is disruptive and not the first step.
* B: Confirming that appropriate TCP ports (specifically 179) are still allowed through the firewall directly addresses the most probable cause related to the firewall change event.
* C: Restarting NAT service is likely irrelevant unless NAT is incorrectly configured for BGP peers.
* D: Confirming the peer AS is a basic configuration check but less likely related to thefirewall changeevent than port blocking.
* Conclusion:Given the problem occurred immediately following a firewall change, verifying that the firewall still permits TCP port 179 between the BGP peers is the most direct and likely troubleshooting step.
References:BGP protocol specifications (RFC 4271), Firewall management principles, Network troubleshooting methodology. This relates to "Routing" (16%), "Security" (10%), and "Troubleshooting" (10%) objectives.

質問 # 99
A customer has configured 802.1X authentication with MAC authentication fallback and is complaining that printers are not accessible with the new configuration below.
You can see a successful entry in HPE Aruba Networking ClearPass Access Tracker assigning the correct user role and you have confirmed that the printer MAC address is being learned in the correct VLAN. However, the printer network settings show an IP address starting with 169.254.

Which configuration change would you recommend to resolve the issue?
interface 1/1/1
  • A. aaa authentication port-access auth-precedence mac-auth dot1x
    aaa authentication allow-fail-through
  • B. interface 1/1/1
  • C. aaa authentication port-access auth-priority dot1x mac-auth
  • D. port-access onboarding-method concurrent enable
    interface 1/1/1
正解：A
解説：
Printers don't do 802.1X. With the default order, the switch waits for 802.1X to fail before trying MAC authentication, causing DHCP to time out and the printer to self-assign a 169.254 address.
Set the authentication order so MAC auth is tried first:
interface 1/1/1
aaa authentication port-access auth-precedence mac-auth dot1x
This lets the printer authenticate immediately via MAC and obtain a DHCP address in the correct VLAN.

質問 # 100
......
MogiExamが提供した対応性の訓練問題をテストにして初めてHPのHPE7-A06認定試験に参加する受験者の最もよいな選択でございます。真実試験問題が似てるのを確保することができて一回合格するのは目標にしています。もし試験に失敗したら、弊社が全額で返金いたします。
HPE7-A06合格問題: https://www.mogiexam.com/HPE7-A06-exam.html
HPE7-A06試験問題の質問と回答の内容は洗練されており、最も重要な情報に焦点を当てています、そして、それらの有用なリソースをHP HPE7-A06学習資料に追加します、お客様に安心させるために、我々は「HPE7-A06試験に失敗したら、全額で資料の料金を返金します、さらに、HPE7-A06学習資料が古くなっているのではないかと思われるかもしれません、HP HPE7-A06問題トレーリング 時々に、選択は努力より大切です、我々のHPE7-A06練習テスト問題は多くの優秀な候補者の中で勝ちたいときに、あなたが多くの知識を学ぶのに役立ち、大きな助けとなります、この目標を実現するようには、我が社MogiExamのは試験改革のとともにめざましく推進していき、最も専門的なHPE7-A06問題集をリリースしています。
それならせめて、稔と小湊鐵道へ行く予定ぐらいは死守したかった、兄弟になる、HPE7-A06試験問題の質問と回答の内容は洗練されており、最も重要な情報に焦点を当てています、そして、それらの有用なリソースをHP HPE7-A06学習資料に追加します。
最高の参考書でHP HPE7-A06認定試験に合格しようお客様に安心させるために、我々は「HPE7-A06試験に失敗したら、全額で資料の料金を返金します、さらに、HPE7-A06学習資料が古くなっているのではないかと思われるかもしれません、時々に、選択は努力より大切です。
無料でクラウドストレージから最新のMogiExam HPE7-A06 PDFダンプをダウンロードする：https://drive.google.com/open?id=1Ar3-YBdGzgLV52nV1mkabR2ErPTyJ8aL
https://www.pass4cram.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list