Linux SDK Build Error

tm-mec

Hello,
I'm using the Linux SDK, an rk3566 aio board.

I build it with this commands:
./build.sh aio-3566-jd4-ubuntu.mk
./build.sh

But when building it the device doesn't start and is throwing an error, does someone have an idea?

1. mount: mounting /dev/mmcblk1p6 on /root failed: Invalid argument
   
2. done.
   
3. Begin: Running /scripts/local-bottom ... done.
   
4. Begin: Running /scripts/init-bottom ... [    4.651715] vendor storage:20190527 r                                                                                                                                                             et = -1
   
5. [    4.835173] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
   
6. Warning: overlayroot: configuring overlayroot with driver=overlay mode=device op                                                                                                                                                             ts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
   
7. [    4.963550] EXT4-fs (mmcblk1p7): recovery complete
   
8. [    4.965832] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. O                                                                                                                                                             pts: (null)
   
9. mount: mounting /root on /root-ro failed: Invalid argument
   
10. Failure: overlayroot: failed to move root away from /root to /root-ro
    
11. mount: mounting /dev on /root/dev failed: No such file or directory
    
12. mount: mounting /dev on /root/dev failed: No such file or directory
    
13. Warning: Something odd, no /lib/modules/4.19.219 in initramfs.
    
14. done.
    
15. mount: mounting /run on /root/run failed: No such file or directory
    
16. run-init: current directory on the same filesystem as the root: error 0
    
17. Target filesystem doesn't have requested /sbin/init.
    
18. run-init: current directory on the same filesystem as the root: error 0
    
19. run-init: current directory on the same filesystem as the root: error 0
    
20. run-init: current directory on the same filesystem as the root: error 0
    
21. run-init: current directory on the same filesystem as the root: error 0
    
22. run-init: current directory on the same filesystem as the root: error 0
    
23. No init found. Try passing init= bootarg.
    
24. 
    
25. 
    
26. BusyBox v1.27.2 (Ubuntu 1:1.27.2-2ubuntu3.2) built-in shell (ash)
    
27. Enter 'help' for a list of built-in commands.
    
28. 
    
29. (initramfs) [    5.848415] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
    
30. [    6.861753] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
    
31. [    7.875081] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
    
32. [    8.888413] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
    
33. [    9.901730] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
    
34. [   10.915082] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
    
35. [   11.928402] rk-pcie 3c0000000.pcie: PCIe Link Fail
    
36. [   11.928469] rk-pcie 3c0000000.pcie: failed to initialize host
    
37. [   32.061826] vcc5v0_otg: disabling
    
38. [   32.061903] vcc3v3_lcd0_n: disabling
    

Copy the code

Liuth

have you put the ubuntu rootfs under SDK/ubuntu_rootfs/ and rename it to rk356x_ubuntu_rootfs.img ?
https://wiki.t-firefly.com/en/Co ... d-ubuntu-filesystem

tm-mec

Liuth Posted at 5/11/2022 09:26
have you put the ubuntu rootfs under SDK/ubuntu_rootfs/ and rename it to rk356x_ubuntu_rootfs.img ?
...

yes