Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Board › AIO-3288J› Reliable JN0-637 Test Prep & JN0-637 Latest Exam G ...
New Topic
Print Previous Topic Next Topic

[General] Reliable JN0-637 Test Prep & JN0-637 Latest Exam Guide

samwalk892

127

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
127

【General】 Reliable JN0-637 Test Prep & JN0-637 Latest Exam Guide

Posted at 13 hour before      View：11 | Replies：0        Print      Only Author   [Copy Link] 1#
BONUS!!! Download part of Easy4Engine JN0-637 dumps for free: https://drive.google.com/open?id=1LUrPG1G1vnQ_brskc-5A1XKPSmIhA78Y
Our JN0-637 exam training material is organized by high experienced IT workers. Our IT elite team offer new version of JN0-637 Exam real questions gradually, which aims to ensure examinees pass JN0-637 test in one time.
These Juniper JN0-637 dumps are real, updated, and error-free. It provides you with the essential Juniper JN0-637 exam knowledge that you need to prepare and pass the Juniper JN0-637 certification test with high scores. You can easily use all these three Juniper JN0-637 Exam Questions format. These formats are compatible with all devices, operating systems, and the latest browsers.
Quiz Updated JN0-637 - Reliable Security, Professional (JNCIP-SEC) Test PrepIf you are going to buying the JN0-637 learning materials online, the safety for the website is quite important. We have professional technicians to examine the website every day, therefore we can provide you with a clean and safe shopping environment. JN0-637 learning materials of us contain the most knowledge points for the exam, and it will not only help you to get a certificate successfully but also improve your ability in the process of learning. We also offer you free update for one year if you buy JN0-637 Exam Dumps from us.
Juniper JN0-637 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Multinode High Availability (HA): In this topic, aspiring networking professionals get knowledge about multinode HA concepts. To pass the exam,  candidates must learn to configure or monitor HA systems.
Topic 2
  • Advanced IPsec VPNs: Focusing on networking professionals, this part covers advanced IPsec VPN concepts and requires candidates to demonstrate their skills in real-world applications.
Topic 3
  • Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.
Topic 4
  • Advanced Policy-Based Routing (APBR): This topic emphasizes on advanced policy-based routing concepts and practical configuration or monitoring tasks.
Topic 5
  • Logical Systems and Tenant Systems: This topic of the exam explores the concepts and functionalities of logical systems and tenant systems.
Topic 6
  • Automated Threat Mitigation: This topic covers Automated Threat Mitigation concepts and emphasizes implementing and managing threat mitigation strategies.
Topic 7
  • Advanced Network Address Translation (NAT): This section evaluates networking professionals' expertise in advanced NAT functionalities and their ability to manage complex NAT scenarios.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q33-Q38):NEW QUESTION # 33
Refer to the Exhibit:

Which two statements about the configuration shown in the exhibit are correct?
  • A. The local peer is assigned a dynamic IP address.
  • B. The remote IKE gateway IP address is 203.0.113.100.
  • C. The remote peer is assigned a dynamic IP address.
  • D. The local IKE gateway IP address is 203.0.113.100.
Answer: B,C
Explanation:
The two statements about the configuration shown in the exhibit are correct are:
A) The remote IKE gateway IP address is 203.0.113.100. The exhibit shows that the address option under the gateway statement is set to 203.0.113.100, which specifies the IP address of the primary IKE gateway. The address option is used to configure the IP address or the hostname of the remote peer that has a static IP address1.
D) The remote peer is assigned a dynamic IP address. The exhibit shows that the dynamic option under the gateway statement is configured with various attributes, such as general-ikeid, ike-user-type, and user-at-hostname. The dynamic option is used to configure the identifier for the remote gateway with a dynamic IP address. The dynamic option also enables the SRX Series device to accept multiple connections from remote peers that have the same identifier2.
The other statements are incorrect because:
B) The local peer is not assigned a dynamic IP address, but a static IP address. The exhibit shows that the local-address option under the gateway statement is set to 192.0.2.100, which specifies the IP address of the local IKE gateway. The local-address option is used to configure the IP address of the local peer that has a static IP address1.
C) The local IKE gateway IP address is not 203.0.113.100, but 192.0.2.100, as explained above.
Reference: gateway (Security IKE) dynamic (Security IKE)

NEW QUESTION # 34
Exhibit

Referring to the exhibit, which two statements are true about the CAK status for the CAK named
"FFFP"? (Choose two.)
  • A. CAK is not used for encryption and decryption of the MACsec session.
  • B. SAK is not generated using this key.
  • C. SAK is successfully generated using this key.
  • D. CAK is used for encryption and decryption of the MACsec session.
Answer: B,D

NEW QUESTION # 35
You want to test how the device handles a theoretical session without generating traffic on the Junos security device.
Which command is used in this scenario?
  • A. show security match-policies
  • B. show security policies
  • C. show security flow session
  • D. request security policies check
Answer: D
Explanation:
The request security policies check command allows you to simulate a session through the SRX device, checking the security policy action that would apply without needing to send real traffic. This helps in validating configurations before actual deployment. For more details, see Juniper Security Policies Testing.
The command request security policies check is used to test how a Junos security device handles a theoretical session without generating actual traffic. This command is useful for validating how security policies would be applied to a session based on various parameters like source and destination addresses, application type, and more.
* Explanation of Answer A (request security policies check):
* This command allows you to simulate a session and verify which security policies would be applied to the session. It's a proactive method to test security policy configurations without the need to generate real traffic.
* Example usage:
bash
request security policies check from-zone trust to-zone untrust source 10.1.1.1 destination 192.168.1.1 protocol tcp application junos-https Juniper Security Reference:
* Security Policies Check: This command provides a way to simulate and verify security policy behavior without actual traffic. Reference: Juniper Security Policy Documentation.

NEW QUESTION # 36
Exhibit:


You are having problems configuring advanced policy-based routing.
What should you do to solve the problem?
  • A. Remove the default static route from the main instance configuration.
  • B. Change the routing instance to a virtual router instance.
  • C. Apply a policy to the APBR RIB group to only allow the exact routes you need.
  • D. Change the routing instance to a forwarding instance.
Answer: D

NEW QUESTION # 37
You are configuring advanced policy-based routing. You have created a static route with next hop of an interface in your inet.0 routing table


Referring to the exhibit, what should be changed to solve this issue?
  • A. You should change the routing instance type to virtual-router.
  • B. You should delete the interface-routes configuration under the routing-options hierarchy.
  • C. You should move the static route configuration to the main routing instance.
  • D. You should move the inet. o table before the routing instance table in your rib-groups configuration.
Answer: D

NEW QUESTION # 38
......
In recent years, many people are interested in Juniper certification exam. So, Juniper JN0-637 test also gets more and more important. As the top-rated exam in IT industry, JN0-637 certification is one of the most important exams. With JN0-637 certificate, you can get more benefits. If you want to attend the exam, Easy4Engine Juniper JN0-637 questions and answers can offer you convenience. The dumps are indispensable and the best.
JN0-637 Latest Exam Guide: https://www.easy4engine.com/JN0-637-test-engine.html
What's more, part of that Easy4Engine JN0-637 dumps now are free: https://drive.google.com/open?id=1LUrPG1G1vnQ_brskc-5A1XKPSmIhA78Y
https://www.itexamdownload.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list