Building Ubuntu image, but u-boot says Android

irenek

I built an Ubuntu image for ROC-RK3328-CC as described here:

http://wiki.t-firefly.com/ROC-RK3328-CC/linux_compile.html

I flashed it on SD card, but when I run it, all I see is a splash screen and in the serial console it gets to Linux  command prompt without booting rootfs.  I see the following in U-Boot serial console output, which seems to indicate that it thinks it's an Android image, even though I built Ubuntu image and the image file name (ROC-RK3328-CC-UBUNTU20180920-GPT-SDBOOT-20200909-1615.img) also indicates that this is an Ubuntu image.  Any idea why U-boot think's it's an Android image and how to fix it?  I am building U-boot from scratch.  Here is the U-boot output:

ANDROID: reboot reason: "recovery"
Fdt Ramdisk skip relocation
Booting IMAGE kernel at 0x00280000 with fdt at 0x8300000...


## Booting Android Image at 0x0027f800 ...

ronsmit570

Truly an impressive article, I’m grateful for your share. This is the C-TS422-2504 test dumps pdf exam that helped me advance in my career with a promotion and raise. It’s free today for all of you. Wishing you success!

craigro484

What an exceptional article, I appreciate you sharing it! Boot camp SPLK-1002 gives you a wealth of free content, created to assist you.

nedgray320

It truly opened my eyes to a new world of ideas. The Valid CSPAI test cram materials are excellent, and you can access them for free.