Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Core Board › Core-3588JD4› F5CAB5 Pass Guide | Reliable F5CAB5 Exam Blueprint
New Topic
Print Previous Topic Next Topic

[Hardware] F5CAB5 Pass Guide | Reliable F5CAB5 Exam Blueprint

leowals265

135

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
135

【Hardware】 F5CAB5 Pass Guide | Reliable F5CAB5 Exam Blueprint

Posted at 2 hour before      View：6 | Replies：0        Print      Only Author   [Copy Link] 1#
DumpsTorrent are specialized in providing our customers with the most reliable and accurate F5CAB5 exam guide and help them pass their F5CAB5 exams by achieve their satisfied scores. With our F5CAB5 study materials, your exam will be a piece of cake. We have a lasting and sustainable cooperation with customers who are willing to purchase our F5CAB5 Actual Exam. We try our best to renovate and update our F5CAB5 study materials in order to help you fill the knowledge gap during your learning process, thus increasing your confidence and success rate.
May be you will meet some difficult or problems when you prepare for your F5CAB5 exam, you even want to give it up. It is no exaggeration to say that our study material is the most effective product for candidates to prepare for their exam. Because F5CAB5 exam torrent can help you to solve all the problems encountered in the learning process, F5CAB5 Practice Test will provide you with very flexible learning time so that you can easily pass the exam. At the same time, if you have any questions during the trial period of F5CAB5 quiz guide, you can feel free to communicate with our staffs, and we will do our best to solve all the problems for you.
Pass F5 F5CAB5 Certification with Ease Using DumpsTorrent Exam QuestionsMany don't find real F5CAB5 exam questions and face loss of money and time. DumpsTorrent made an absolute gem of study material which carries actual F5 F5CAB5 Exam Questions for the students so that they don't get confused in order to prepare for F5 F5CAB5 Exam and pass it with a good score. The F5 F5CAB5 practice test questions are made by examination after consulting with a lot of professionals and receiving positive feedback from them.
F5 BIG-IP Administration Support and Troubleshooting Sample Questions (Q38-Q43):NEW QUESTION # 38
Users are unable to reach an application. The BIG-IP Administrator checks the Configuration Utility and observes that the Virtual Server has a red diamond in front of the status. What is causing this issue?
  • A. The Virtual Server is receiving HTTPS traffic over HTTP virtual.
  • B. The Virtual Server is disabled.
  • C. All pool members are down.
  • D. All pool members have been disabled.
Answer: C
Explanation:
In the BIG-IP Configuration Utility, the status icon (shape and color) provides immediate feedback on why a virtual server is not working as expected81. A "Red Diamond" indicates that the object is "Offline" and unavailable to process traffic82. For a virtual server, this specific status typically means it has inherited an offline state from its mandatory backend resources8383. If all pool members associated with the virtual server have failed their health monitors, the virtual server will transition to a red diamond status because it has no healthy destination for incoming requests. This is distinct from a "Black Circle," which would indicate the virtual server has been manually "Disabled" by an administrator85858585. To troubleshoot a red diamond, the administrator must examine the associated pool and its members to determine why the health monitors are failing (e.g., server crashes, network path failures, or incorrect monitor strings). Resolving the health check failures on the pool members will return the virtual server to an "Available" (Green) status.

NEW QUESTION # 39
Refer to the exhibit.

A BIG-IP Administrator needs to deploy an application on the BIG-IP system to perform SSL offload and re-encrypt the traffic to pool members. During testing, users are unable to connect to the application.
What must the BIG-IP Administrator do to resolve the issue? (Choose one answer)
  • A. Enable Forward Proxy in the SSL Profile (Client)
  • B. Configure Protocol Profile (Server) as splitsession-default-tcp
  • C. Configure an SSL Profile (Server)
  • D. Remove the configured SSL Profile (Client)
Answer: C
Explanation:
To successfully perform SSL offload and re-encryption on a BIG-IP system, the virtual server must be configured with both a Client SSL profile and a Server SSL profile. The Client SSL profile enables BIG-IP to decrypt inbound HTTPS traffic from clients, while the Server SSL profile is required to re-encrypt traffic before forwarding it to the pool members.
From the exhibit, the virtual server has a Client SSL profile configured, which allows BIG-IP to accept HTTPS connections from clients. However, there is no Server SSL profile attached, meaning BIG-IP attempts to send unencrypted HTTP traffic to pool members listening on HTTPS (port 443). This protocol mismatch causes the server-side SSL handshake to fail, resulting in users being unable to connect to the application.
This behavior is well documented in BIG-IP SSL troubleshooting guides: when backend servers expect HTTPS, a Server SSL profile is mandatory to establish a secure connection from BIG-IP to the pool members.
The other options are incorrect:
Removing the Client SSL profile (Option A) would break client-side HTTPS.
The server-side TCP profile (Option B) is unrelated to SSL encryption.
Forward Proxy (Option C) is only used for outbound SSL inspection scenarios.
Therefore, configuring an SSL Profile (Server) is the correct and required solution.

NEW QUESTION # 40
A BIG-IP Administrator observes the following pool member status message:
Pool /Common/testpool member /Common/10.120.0.5:8090 monitor status down
[/Common/http: up, /Common/http2: down; last error:]
Why is this pool member being marked down? (Choose one answer)
  • A. The pool member is currently only serving UDP traffic.
  • B. The pool member is currently only serving HTTP traffic.
  • C. The pool member is currently only serving TCP traffic.
  • D. The pool member is currently only serving HTTPS traffic.
Answer: B
Explanation:
The pool member is marked DOWN because it is monitored by multiple health monitors, specifically an HTTP monitor and an HTTP/2 monitor. The status message clearly shows that the HTTP monitor is UP, while the HTTP/2 monitor is DOWN. In BIG-IP, when multiple monitors are assigned to a pool member, the default behavior is AND logic, meaning all assigned monitors must succeed for the pool member to be considered healthy.
In this scenario, the server is responding successfully to standard HTTP (likely HTTP/1.1) requests but does not support or respond correctly to HTTP/2 requests. As a result, the HTTP/2 monitor fails, which causes the overall monitor status to be DOWN, even though HTTP traffic itself is working.
This behavior is expected and documented in BIG-IP monitoring logic. Unless the monitor rule is explicitly changed to "at least one of", a single failing monitor will mark the pool member down. Therefore, the correct conclusion is that the pool member is only serving HTTP traffic, not HTTP/2.
The resolution would be to either remove the HTTP/2 monitor, correct the application to support HTTP/2, or adjust the monitor rule to match the intended health-check logic.

NEW QUESTION # 41
A BIG-IP Administrator observes the following messages in the /var/log/ltm log:
warning tmm[pid]: 011e0002: sweeper_segment_cb_any: Aggressive mode /Common/default-eviction-policy activated (0) (global memory) (345209/690176 pages) warning tmm[pid]: 011e0003: Aggressive mode sweeper /Common/default-eviction-policy (0) (global memory) 1 connections killed warning tmm[pid]: 011e0003: Aggressive mode sweeper /Common/default-eviction-policy (0) (global memory) 1 connections killed warning tmm[pid]: 011e0003: Aggressive mode sweeper /Common/default-eviction-policy (0) (global memory) 1 connections killed What is happening when the BIG-IP Administrator sees the messages displayed above? (Choose two answers)
  • A. The BIG-IP system starts reaping connections; all the connections will be dropped
  • B. The global eviction policy is triggered due to TMM memory exhaustion
  • C. The global eviction policy is triggered due to swap memory being used too high
  • D. The BIG-IP system starts reaping connections; some connections will be dropped
Answer: B,D
Explanation:
Comprehensive and Detailed 150 to 250 Words Explanation From BIG-IP Administration, Support, and Troubleshooting Documents:
These log messages indicate that the BIG-IP system's Traffic Management Microkernel (TMM) has entered aggressive eviction mode due to high global memory utilization. When TMM memory consumption reaches critical thresholds, BIG-IP activates the default eviction policy to protect system stability and prevent a full traffic processing failure. This condition directly corresponds to Option A, where the global eviction policy is triggered because TMM memory resources are nearing exhaustion.
Once aggressive mode is activated, BIG-IP begins using the connection sweeper mechanism, which selectively terminates existing connections to free memory. The repeated log entries stating "1 connections killed" confirm that the system is reaping some connections, not all connections. This behavior matches Option C. The eviction process is incremental and controlled, targeting idle, low-priority, or least-recently-used connections first to minimize impact on active traffic.
Option B is incorrect because BIG-IP does not drop all connections during aggressive mode; it only removes enough connections to relieve memory pressure. Option D is also incorrect because TMM eviction is based on TMM global memory usage, not swap memory utilization. TMM does not rely on swap space in the same way the host Linux system does.
These messages are a critical warning sign that the system is under memory stress and may require traffic optimization, connection limits, or hardware scaling.

NEW QUESTION # 42
A BIG-IP Administrator needs to determine why only one pool member is showing connections from the virtual server, resulting in uneven load balancing.
What two reasons would cause uneven load balancing? (Choose two answers)
  • A. The virtual server is marked down.
  • B. Monitors have marked down multiple pool members.
  • C. All pool members are marked down.
  • D. The pool has a persistence profile configured.
Answer: B,D
Explanation:
Uneven load balancing on a BIG-IP system typically occurs when traffic is not distributed evenly across all available pool members. One common reason is that monitors have marked down multiple pool members (Option B). When health monitors fail for specific pool members, BIG-IP automatically removes those members from load-balancing decisions. As a result, traffic is sent only to the remaining healthy member, creating the appearance that load balancing is not functioning correctly. This behavior is expected and aligns with BIG-IP's design to ensure traffic is sent only to healthy resources.
Another frequent cause is the presence of a persistence profile on the pool or virtual server (Option C). Persistence (such as source address or cookie persistence) forces subsequent client connections to be sent to the same pool member for session continuity. While persistence is critical for certain applications, it can override the load-balancing algorithm and cause most or all traffic to be directed to a single pool member, especially during low traffic volumes or testing scenarios.
The other options are incorrect because a virtual server marked down (Option A) would not pass traffic at all, and all pool members marked down (Option D) would result in no connections rather than uneven distribution. This analysis follows standard BIG-IP troubleshooting methodology using pool status, monitor results, and persistence configuration review.

NEW QUESTION # 43
......
DumpsTorrent is so popular for the reason that our F5CAB5 exam preparations are infallible to offer help and we will offer incessant help. On one hand, all content of our F5CAB5 study materials can radically give you the best backup to make progress. All related updates of the F5CAB5 learning guide will be sent to your mailbox. In a sense, our F5CAB5 training questions are classy and can broaden your preview potentially.
Reliable F5CAB5 Exam Blueprint: https://www.dumpstorrent.com/F5CAB5-exam-dumps-torrent.html
You will get the F5CAB5 exam dumps within ten minutes, The F5 F5CAB5 latest pdf vce is attached with detailed analysis for questions where available, F5 F5CAB5 Pass Guide We will offer you 24/7 customer assisting to support you in case you may meet some troubles like downloading, You will pass your exam with our F5CAB5 certification exam dump.
You can also share libraries with other Creative Cloud users, The status of the policy is located in the lower-right part of the SmartDashboard frame, You will get the F5CAB5 Exam Dumps within ten minutes.
Enhance Your Success Rate with DumpsTorrent's F5 F5CAB5 Exam DumpsThe F5 F5CAB5 latest pdf vce is attached with detailed analysis for questions where available, We will offer you 24/7 customer assisting to support you in case you may meet some troubles like downloading.
You will pass your exam with our F5CAB5 certification exam dump, Just as exactly, to obtain the certification of F5CAB5 exam braindumps, you will do your best to pass the according exam without giving up.
https://www.premiumvcedump.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list