Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

[Android]Firefly RK3399's Freeze state on Booting !!

58

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
58

[Android]Firefly RK3399's Freeze state on Booting !!

Posted at 6/22/2017 10:38:21      View:6015 | Replies:5        Print      Only Author   [Copy Link] 1#
Hi,

I confuse due to Rk3399's Freeze state on booting. (attached capure image file )
If anyone know it, please help me.


1. Our HW spec : ~ same Firefly reference components
RK3399, DDR( K4B8G1646D-MYK0_8Gb,1600)x4 ,Emmc(32GB), etc.

2. I tried other firefly other image file, but result's same condition !
_Firefly-RK3399_Android6.0_170409
_Firefly-RK3399_Android6.0.1_170515
_Firefly-RK3399_Android7.1.1_170516


3. Debug message ;
===========================================================================================
▒▒@@@` `@@@ `@`   @`@H@`@p@`N@@B@ & 0`BB``@@b@8 pDDDDDD0  @@ B
"  00  0B@HbpbH@`@`@p``N@@B@ &00`BF`D@@b@8 pDDDDDD0  @
"   $0 0B@Hbpb`H@`DN`H``N@@   &0DD0
@b`H@HN`p
"   0  0B@Hbpb`H@`DN`H``N@@   "0@F@b`@`H@HN`p`@p0 pDD0     d@`0 pDDDDDD0  @@$    b@p@0 p
"   0$ 0B@Hbpb`H@`DN`H``N@@  " 0 BH@HN`p`@p0 p @@    vHb0 pfDFDffC0 5db2 00 size: 0x1000)
[    1.351609] D1:camsys_init_ext_fsh_module(20): init external flash module
[    1.351620] D1:camsys_platform_probe(1557): Probe ff910000.isp device success
[    1.352815] D1:camsys_platform_probe(1399): compatible is rockchip,rk3399-isp
[    1.352815]
[    1.352832] E:camsys_soc_init(51): camsys_soc_init exit!
[    1.352883] D1:camsys_mipiphy_probe_cb(205): ff920000.isp mipi phy0 probe success (reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    1.352883]
[    1.352905iphy_probe_cb(205): ff920000.isp mipi phy1 probe success (reg_ph  size: 0x0)
[    1.352905]
[    1.352954] D1:camsys_mipiphy_u_base=0xffffff800ae2e000
[    1.352983] D1:camsys_mipiphy_probxffffff800b140000
[    1.353536] D1:camsys_platform_probe(1527)y:
[    1.353549] D1:camsys_platform_probe(1543):  Register memir: 0xffffff800b120000 size: 0x10000)
amsys_init_ext_fsh_module(20): init external flash modulexffffffc005dcd000 size: 0x1000)
[    latform_probe(1557): Probe ff920000.isp device success
[    1.ly_register: Expected proper parent device for 'test_ac'
[    1_register: Expected proper parent device for 'test_battery'
[  ermal_zone2: power_allocator: sustainable_power will be estimateer_supply_register: Expected proper parent device for 'test_usb'v8_dvp: supplied by vcc3v3_sys
[    1.355157] vcca1v8_codec: su
                                [    1.355254] vcc_sd: supplied by vcc3v3_sys
[    1.355348] vcc3v3_sys
[    1.356626] rk_tsadcv2_temp_to_code: Invalid conve3, temperature=2147483647
[    1.357162] device-mapper: uevent:57434] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialism
[    1.357548] Bluetooth: HCI UART driver ver 2.3
[    1.357RT protocol H4 registered
[    1.357571] Bluetooth: HCI UART pr[    1.357987] vdd_cpu_l: supplied by vcc3v3_sys
[    1.358951]y vcc5v0_sys
[    1.360473] sdhci: Secure Digital Host Controll[    1.360486] sdhci: Copyright(c) Pierre Ossman
[    1.360499]Multimedia Card Interface Driver
[    1.361291] dwmmc_rockchip supports 32-bit address mode.
[    1.361374] dwmmc_rockchip fe3ternal DMA controller.
[    1.361395] dwmmc_rockchip fe310000.d
[    1.361449] dwmmc_rockchip fe310000.dwmmc: DW MMC controllest data width,256 deep fifo
[    1.361516] dwmmc_rockchip fe310gulator found
[    1.361528] dwmmc_rockchip fe310000.dwmmc: No [    1.362279] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-   1.362329] dwmmc_rockchip fe320000.dwmmc: Using internal DMA c dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.3623820000.dwmmc: DW MMC controller at irq 26,32 bit host data width,.362493] dwmmc_rockchip fe320000.dwmmc: No vmmc regulatop-iodomain io-domains: Setting to 3300000 done
[    1.362868] rmains: Setting to 3300000 done
[    1.378114] mmc_host mmc0: Bu0000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.395082] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.395364] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.397014] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.397034] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.430034] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.431033] hidraw: raw HID events driver (C) Jiri Kosina
[    1.436213] usbcore: registered new interface driver usbhid
[    1.436250] usbhid: USB HID core driver
[    1.436357] inv_mpu_iio: inv_mpu_init:747
[    1.437107] ashmem: initialized
[    1.438502] ff100000.saradc supply vref not found, using dummy regulator
[    1.440070] rknandbase v1.1 2016-01-08
[    1.440589] usbcore: registered new interface driver snd-usb-audio
[    1.456575] u32 classifier
[    1.456592]     Actions configured
[    1.456646] Netfilter messages via NETLINK v0.30.
[    1.456714] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.457081] ctnetlink v0.93: registering with nfnetlink.
[    1.457808] xt_time: kernel timezone is -0000
[    1.458821] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.458970] arp_tables: (C) 2002 David S. Miller
[    1.459470] Initializing XFRM netlink socket
[    1.459930] NET: Registered protocol family 10
[    1.460793] mip6: Mobile IPv6
[    1.460830] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.462327] sit: IPv6 over IPv4 tunneling driver
[    1.462798] NET: Registered protocol family 17
[    1.462831] NET: Registered protocol family 15
[    1.462876] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.463929] Bridge firewalling registered
[    1.463944] Ebtables v2.0 registered
[    1.464152] Bluetooth: RFCOMM TTY layer initialized
[    1.464168] Bluetooth: RFCOMM socket layer initialized
[    1.464195] Bluetooth: RFCOMM ver 1.11
[    1.464217] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.464227] Bluetooth: BNEP filters: protocol multicast
[    1.464242] Bluetooth: BNEP socket layer initialized
[    1.464257] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.464271] Bluetooth: HIDP socket layer initialized
[    1.464305] l2tp_core: L2TP core 464326] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.464342] [kill_wlan_init
ILL]: wlan_platdata_parse_dt: enable wifi power control.KILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    1]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3,64777] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.46478 rfkill_wlan_probe
[    1.464842] [BT_RFKILL]: Enter rfkill_rk_T_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_g [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,rese5233] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT 1.465263] [BT_RFKILL]: bluetooth_platdata_parse_dt: get propert
[    1.465592] [BT_RFKILL]: Request irq for bt wakeup host
[ L]: ** disable irq
[    1.465771] [BT_RFKILL]: bt_default devic.465920] sensor_register_slave:mpu6880_gyro,id=47
[    1.466444setend emulation handler
[    1.466640] schedtune: init normali  1.466655] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222
[ PU[1]            min_pwr:     0 max_pwr:   222
[    1.466693] s      min_pwr:     0 max_pwr:   222
[    1.466704] schedtune: Cpwr:     0 max_pwr:   222
[    1.466716] schedtune: CLUSTER[4-5ax_pwr:  1108
[    1.466727] schedtune: CPU[4]            min_p108
[    1.466738] schedtune: CPU[5]            min_pwr:     0 1.466749] schedtune: SYSTEM            min_pwr:   121 max_pwr:  edtune: using normalization constants mul: 3862781856 sh1: 1 sh2schedtune: verify normalization constants...
[    1.466781] sch4313 => norm_pwr:  1024
[    1.466792] schedtune: max_pwr/2^1:
tune: max_pwr/2^3:  539 => norm_pwr:   127  1.466801] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
[    1.466820] sched9 => norm_pwr:    63
[    1.466830] schedtune: max_pwr/2^5:  13    1.467664] registered taskstats version 1
[    1.470930] Fre4K (ffffffc0f5c00000 - ffffffc0f6c00000)
[    1.472083] mmc1: Mot set
[    1.473982] vdd_gpu: supplied by vcc5v0_sys
[    1.4ied as 0x0860 r2p0 status 0
[    1.483914] mmc1: new HS400 Enha address 0001
[    1.484151] I : [File] : drivers/gpu/arm/midgabase_devfreq.c; [Line] : 265; [Func] : kbase_devfreq_init(); sucel_simple.
[    1.484767] mali ff9a0000.gpu: Probed as mali0
[1: mmc1:0001 BJNB4R 29.1 GiB
[    1.486618] mmcblk1boot0: mmc14.00 MiB
[    1.488316] xhci-hcd xhci-hcd.2.auto: xHCI Host Con] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus644] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version
[    1.488714] xhci-hcd xhci-hcd.2.auto: irq 232, io mem 0xfe8usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  duct: xHCI Host Controller
[    1.488942] usb usb5: Manufactured
[    1.488957] usb usb5: SerialNumber: xhci-hcd.2.auto
[    USB hub found
[    1.489626] hub 5-0:1.0: 1 port detected
[   hcd.2.auto: xHCI Host Controller
[    1.490023] xhci-hcd xhci-h registered, assigned bus number 6
[    1.490104] usb usb6: We hms for LPM for this host, disabling LPM.
[    1.490218] usb usd, idVendor=1d6b, idProduct=0003
[    1.490238] usb usb6: New U3, Product=2, SerialNumber=1
[    1.490255] usb usb6: Product: [    1.490270] usb usb6: Manufacturer: Linux 4.4.16 xhci-hcd
[ erialNumber: xhci-hcd.2.auto
[    1.490887] mmcblk1boot1: mmc1:2 4.00 MiB
[    1.491003] hub 6-0:1.0: USB hub found
[    1.49rt detected
[    1.493226] xhci-hcd xhci-hcd.2.auto: remove, stusb usb6: USB disconnect, device number 1
[    1.495140] mmcblkR partition 3 4.00 MiB
[    1.495619]  parameter: 0x000000000 -   1.495638]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[   0x000800000 -- 0x000c00000 (4 MB)
[    1.495668]       misc: 0x00 (4 MB)
[    1.495682]   resource: 0x001000000 -- 0x0020000006]     kernel: 0x002000000 -- 0x003400000 (20 MB)
[    1.4957103400000 -- 0x005400000 (32 MB)
[    1.495724]   recovery: 0x005000 (32 MB)
[    1.495738]     backup: 0x007400000 -- 0x00e400095753]      cache: 0x00e400000 -- 0x016400000 (128 MB)
[    1.416400000 -- 0x056400000 (1024 MB)
[    1.495782]   metadata: 0x000 (16 MB)
[    1.495795] baseparamer: 0x057400000 -- 0x05780009]   userdata: 0x057800000 -- 0x747800000 (28416 MB)
[    1.49 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[    1.517270] xhci-hcd xhci-hcd.2.auto: Host not halted after 16000 microseconds.
[    1.517302] xhci-hcd xhci-hcd.2.auto: Host controller not halted, aborting reset.
[    1.517655] xhci-hcd xhci-hcd.2.auto: USB bus 6 deregistered
[    1.517677] xhci-hcd xhci-hcd.2.auto: remove, state 1
[    1.517706] usb usb5: USB disconnect, device number 1
[    1.518445] xhci-hcd xhci-hcd.2.auto: USB bus 5 deregistered
[    1.519056] ehci-platform fe380000.usb: EHCI Host Controller
[    1.519090] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    1.519401] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    1.569990] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.582006] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.582261] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.582293] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.582320] usb usb5: Product: EHCI Host Controller
[    1.582342] usb usb5: Manufacturer: Linux 4.4.16 ehci_hcd
[    1.582363] usb usb5: SerialNumber: fe380000.usb
[    1.583314] hub 5-0:1.0: USB hub found
[    1.583386] hub 5-0:1.0: 1 port detected
[    1.584584] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.584636] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    1.584878] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    1.642321] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.642363] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.642391] usb usb6: Product: Generic Platform OHCI controller
[    1.642415] usb usb6: Manufacturer: Linux 4.4.16 ohci_hcd
[    1.642436] usb usb6: SerialNumber: fe3a0000.usb
[    1.643482] hub 6-0:1.0: USB hub found
[    1.643548] hub 6-0:1.0: 1 port detected
[    1.645265] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.645381] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.645417] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.645471] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.645565] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.645589] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.646090] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.662143] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.678185] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    1.679800] asoc-simple-card hdmi-sound: dw-hdmi-hifi <-> ff8a0000.i2s mapping ok
[    1.696814] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    1.702132] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    1.705341] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
[    1.709260] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[    1.711881] otg_wakelock_init: No USB transceiver found
[    1.711964] dhd_module_init: in
[    1.712001] ======== bcm_wlan_set_plat_data ========
[    1.712023] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    1.712045] host_oob_irq: 62
[    1.712062] host_oob_irq_flags=0x4
[    1.712072] sensor_init: Probe name sensors
[    1.712086] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[    1.712107] dhd_wifi_platform_load: Enter
[    1.712150] Power-up adapter 'DHD generic adapter'
[    1.712220] wifi_platform_set_power = 1
[    1.712237] ======== PULL WL_REG_ON HIGH! ========
[    1.712256] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    1.712275] [WLAN_RFKILL]: wifi turn on power. -1
[    1.713379] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:03 UTC (1358499003)
[    1.723233] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[    1.723276] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.723314] usb 1-1: Product: USB 2.0 Hub [MTT]
[    1.724342] hub 1-1:1.0: USB hub found
[    1.724604] hub 1-1:1.0: 7 ports detected
u▒   1.740839]
[    1.746007] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
========================================================================================

2_RK3399's Freeze.jpg (65.12 KB, Down times: 512)

2_RK3399's Freeze.jpg
Reply

Use props Report

4

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
4
Posted at 2/20/2018 15:54:16        Only Author  2#
Hi Any luck, I am having similar issues.
Reply

Use props Report

135

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
135
Posted at 1/10/2026 04:24:46        Only Author  3#
What a motivating article, thanks for sharing it with us! The AP-217 latest test sims questions were key to my promotion and salary increase, and today I'm sharing them for free!
Reply

Use props Report

120

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
120
Posted at 1/10/2026 11:28:14        Only Author  4#
That article made a lasting impact on me. Latest Plat-Arch-204 test testking test questions are the key to career success—available for free!
Reply

Use props Report

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133
Posted at before yesterday 00:42        Only Author  5#
すべてのお客様が快適に過ごせるように、当社はすべてのお客様に完璧で思いやりのあるサービスを提供することをお約束します。当社から1z0-1066-25トレーニングファイルを購入すると、完璧なサービスを楽しむ権利があります。 1z0-1066-25学習教材についてご質問がありましたら、いつでもお気軽にご質問ください。1z0-1066-25学習問題の使用をサポートさせていただきます。私たちの完璧なサービスは、1z0-1066-25試験の準備をしていて、あなたが1z0-1066-25試験に合格すると安心できると信じています。
Reply

Use props Report

138

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
138
Posted at before yesterday 04:46        Only Author  6#
Your article was truly refreshing, thank you so much. Sharing the Valid COBIT-Design-and-Implementation exam pattern exam that helped me with my career advancement and raise—it’s free for all today. Best of luck on your professional journey!
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list