Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

[General] RK3399 Maskrom cannot flash idbloader

11

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
11

【General】 RK3399 Maskrom cannot flash idbloader

Posted at 6/25/2018 10:32:04      View:5613 | Replies:2        Print      Only Author   [Copy Link] 1#
Last edited by karltsou In 6/25/2018 10:32 Editor

Hi there,
I'm following the instructions http://www.t-firefly.com/doc/product/info/id/229.html get rk3399 into MaskROM mode for replacing idbloader image, the updated steps looks fine till it shows "prepare idb fail" the red characters in chinese.

Actually, I've checked two loader files, both has same prepare ide fail problem.  
rk3399_loader_v1.08.109.bin (builf from firefly-rk3399 AOSP source)
rk3399_loader_v1.10.112.bin (rk3399 linux github source)


Alos, rkdevelop tools seems replace ideloader without any error messages output but reset device nothing came from debug port. So I think flash ideloaer image was not working.




Thanks in advance
Reply

Use props Report

792

Credits

10

Prestige

10

Contribution

advanced

Rank: 4

Credits
792
Posted at 6/27/2018 10:49:21        Only Author  2#
Try to pack it up with other image for a whole update.img .
Try to switch PC usb port and reset the board again.
Reply

Use props Report

11

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
11
Posted at 7/3/2018 17:51:38        Only Author  3#
Hi,
Use whole image update has same IDB failure problem, change usb port reset the board are not help.
Did you have loader and uboot images for emmc on firefly rk3399 that can share with me?

Thanks,
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list