Error in Installing Drivers in RK 3399-PC

Srikrishna · Posted at 8/12/2019 19:05:06

Last edited by Srikrishna In 8/12/2019 19:06 Editor

I am trying to install PCIe drivers but couldn't install due to missing files. I have used "ROC-RK3399-PC-MEZZ-M2-POE-UBUNTU18.04-GPT-SDBOOT-20190625-1605.img" file for bootup. But it displays the error shown below while installing the drivers. Could anyone suggest a way to add these files?

./arch/arm64/include/asm/opcodes.h:5:10: fatal error: ../../arm/include/asm/opcodes.h: No such file or directory
#include <../../arm/include/asm/opcodes.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

Copy the code

penguin · Posted at 8/13/2019 11:38:05

Hi Srikrishna, how do you install the driver?

Do you compile the driver directly on the board?
Then you need to download the full kernel source code
to the board for convenience. The Firefly root filesystem
currently does not contain the kernel headers.

Srikrishna · Posted at 8/21/2019 17:21:16

I have now successfully installed PCIe drivers but display goes blank after reboot. When I uninstall the driver the display shows up. I am able to use the console mode but not the display mode. Here is the log:

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.167 (daijh@tchip14) (firefly-merged-20190124-oldrkbin: 2f18cc87774957059d9f1d6282ca47f6d6f3ce40) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #152 SMP Tue Jun 25 15:15:26 CST 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] On node 0 totalpages: 1007616
[ 0.000000] DMA zone: 15864 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 1007616 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ec9000 s46120 r8192 d31704 u86016
[ 0.000000] pcpu-alloc: s46120 r8192 d31704 u86016 alloc=21*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991752
[ 0.000000] Kernel command line: storagemedia=sd androidboot.mode=sd androidboot.slot_suffix= androidboot.serialno=db88e99c900a6478 rw rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=ext4 systemd.gpt_auto=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0xf7e81000-0xf7ec1000] (0MB) mapped at [ffffffc0f7e81000-ffffffc0f7ec0fff]
[ 0.000000] Memory: 3937416K/4030464K available (10238K kernel code, 1542K rwdata, 4164K rodata, 1088K init, 1953K bss, 93048K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
.init : 0xffffff8008ea0000 - 0xffffff8008fb0000 ( 1088 KB)
.text : 0xffffff8008080000 - 0xffffff8008a80000 ( 10240 KB)
.rodata : 0xffffff8008a80000 - 0xffffff8008ea0000 ( 4224 KB)
.data : 0xffffff8008fb0000 - 0xffffff8009131808 ( 1543 KB)
vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a280000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a210000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a220000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002293] Console: colour dummy device 80x25
[ 0.002736] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003724] pid_max: default: 32768 minimum: 301
[ 0.004253] Security Framework initialized
[ 0.004719] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005360] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006829] Initializing cgroup subsys devices
[ 0.007278] Initializing cgroup subsys freezer
[ 0.007727] ftrace: allocating 39061 entries in 153 pages
[ 0.108878] sched-energy: Sched-energy-costs installed from DT
[ 0.109448] CPU0: update cpu_capacity 401
[ 0.109895] ASID allocator initialised with 32768 entries
[ 0.113603] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.115008] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.117317] Detected VIPT I-cache on CPU1
[ 0.117351] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.117381] CPU1: using LPI pending table @0x00000000f2ca0000
[ 0.117424] CPU1: update cpu_capacity 401
[ 0.117428] CPU1: Booted secondary processor [410fd034]
[ 0.117981] Detected VIPT I-cache on CPU2
[ 0.118002] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.118029] CPU2: using LPI pending table @0x00000000f2cd0000
[ 0.118055] CPU2: update cpu_capacity 401
[ 0.118058] CPU2: Booted secondary processor [410fd034]
[ 0.118589] Detected VIPT I-cache on CPU3
[ 0.118608] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.118636] CPU3: using LPI pending table @0x00000000f2d20000
[ 0.118662] CPU3: update cpu_capacity 401
[ 0.118665] CPU3: Booted secondary processor [410fd034]
[ 0.119219] Detected PIPT I-cache on CPU4
[ 0.119245] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.119283] CPU4: using LPI pending table @0x00000000f2d50000
[ 0.119321] CPU4: update cpu_capacity 1024
[ 0.119325] CPU4: Booted secondary processor [410fd082]
[ 0.119880] Detected PIPT I-cache on CPU5
[ 0.119898] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.119934] CPU5: using LPI pending table @0x00000000f2d80000
[ 0.119962] CPU5: update cpu_capacity 1024
[ 0.119965] CPU5: Booted secondary processor [410fd082]
[ 0.120052] Brought up 6 CPUs
[ 0.132419] SMP: Total of 6 processors activated.
[ 0.132870] CPU features: detected feature: GIC system register CPU interface
[ 0.133559] CPU features: detected feature: 32-bit EL0 Support
[ 0.134119] CPU: All CPU(s) started at EL2
[ 0.134550] alternatives: patching kernel code
[ 0.136382] devtmpfs: initialized
[ 0.154604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.155531] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.156591] pinctrl core: initialized pinctrl subsystem
[ 0.157301] regulator-dummy: no parameters
[ 0.157854] NET: Registered protocol family 16
[ 0.163583] cpuidle: using governor ladder
[ 0.167591] cpuidle: using governor menu
[ 0.167976] Registered FIQ tty driver
[ 0.168563] vdso: 2 pages (1 code @ ffffff8008a86000, 1 data @ ffffff8008fb4000)
[ 0.169310] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.170100] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.187186] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
[ 0.187268] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
[ 0.187339] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
[ 0.187410] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
[ 0.187479] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
[ 0.197333] console [ttyFIQ0] enabled
[ 0.198016] bootconsole [uart0] disabled
[ 0.198912] Registered fiq debugger ttyFIQ0
[ 0.213521] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccadc-ref[0]'
[ 0.213546] vcc1v8_sys: 1800 mV
[ 0.213712] reg-fixed-voltage vccadc-ref: vcc1v8_sys supplying 1800000uV
[ 0.213766] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
[ 0.213782] vcc3v3_sys: 3300 mV
[ 0.213938] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[ 0.214171] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
[ 0.214223] vcc5v0_host: no parameters
[ 0.214369] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
[ 0.214518] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc_hub_en-regulator[0]' - status (0)
[ 0.214556] vcc_hub_en: no parameters
[ 0.214718] reg-fixed-voltage vcc_hub_en-regulator: vcc_hub_en supplying 0uV
[ 0.214862] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-wifi[0]' - status (0)
[ 0.214905] vcc_wifi: 5000 mV
[ 0.215059] reg-fixed-voltage vcc-wifi: vcc_wifi supplying 5000000uV
[ 0.215187] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-pcie[0]' - status (0)
[ 0.215227] vcc_pcie: 5000 mV
[ 0.215387] reg-fixed-voltage vcc-pcie: vcc_pcie supplying 5000000uV
[ 0.215533] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-sd[0]' - status (0)
[ 0.215571] vcc_sd: 3300 mV
[ 0.215723] reg-fixed-voltage vcc-sd: vcc_sd supplying 3300000uV
[ 0.215779] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-sys[0]'
[ 0.215795] vcc5v0_sys: 5000 mV
[ 0.215952] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[ 0.216002] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[ 0.216017] vcc_phy: no parameters
[ 0.216163] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[ 0.216293] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-lcd-regulator[0]' - status (0)
[ 0.216332] vcc_lcd: no parameters
[ 0.216497] reg-fixed-voltage vcc-lcd-regulator: vcc_lcd supplying 0uV
[ 0.216640] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc_mipi[0]' - status (0)
[ 0.216676] vcc_mipi: no parameters
[ 0.216834] reg-fixed-voltage vcc_mipi: vcc_mipi supplying 0uV
[ 0.216902] rockchip-pinctrl pinctrl: pin gpio1-17 already requested by vcc-pcie; cannot claim for dvdd-1v2
[ 0.217769] rockchip-pinctrl pinctrl: pin-49 (dvdd-1v2) status -22
[ 0.218321] rockchip-pinctrl pinctrl: could not request pin 49 (gpio1-17) from group cif-pwr on device rockchip-pinctrl
[ 0.219284] reg-fixed-voltage dvdd-1v2: Error applying setting, reverse things back
[ 0.220010] of_get_named_gpiod_flags: parsed 'gpio' property of node '/dvdd-1v2[0]' - status (0)
[ 0.220046] dvdd_1v2: no parameters
[ 0.220201] reg-fixed-voltage dvdd-1v2: dvdd_1v2 supplying 0uV
[ 0.220883] iommu: Adding device ff650000.vpu_service to group 0
[ 0.221508] iommu: Adding device ff660000.rkvdec to group 1
[ 0.222102] iommu: Adding device ff8f0000.vop to group 2
[ 0.222664] iommu: Adding device ff900000.vop to group 3
[ 0.223217] iommu: Adding device ff910000.rkisp1 to group 4
[ 0.223804] iommu: Adding device ff920000.rkisp1 to group 5
[ 0.224799] rk_iommu ff650800.iommu: can't get sclk
[ 0.225507] rk_iommu ff660480.iommu: can't get sclk
[ 0.226158] rk_iommu ff8f3f00.iommu: can't get sclk
[ 0.226753] rk_iommu ff903f00.iommu: can't get sclk
[ 0.227363] rk_iommu ff914000.iommu: can't get sclk
[ 0.227961] rk_iommu ff924000.iommu: can't get sclk
[ 0.228767] SCSI subsystem initialized
[ 0.229293] libata version 3.00 loaded.
[ 0.229508] usbcore: registered new interface driver usbfs
[ 0.230039] usbcore: registered new interface driver hub
[ 0.230609] usbcore: registered new device driver usb
[ 0.231114] media: Linux media interface: v0.10
[ 0.231553] Linux video capture interface: v2.00
[ 0.232033] pps_core: LinuxPPS API ver. 1 registered
[ 0.232477] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.233302] PTP clock support registered
[ 0.234883] Advanced Linux Sound Architecture Driver Initialized.
[ 0.235914] Bluetooth: Core ver 2.21
[ 0.236254] NET: Registered protocol family 31
[ 0.236661] Bluetooth: HCI device and connection manager initialized
[ 0.237227] Bluetooth: HCI socket layer initialized
[ 0.237669] Bluetooth: L2CAP socket layer initialized
[ 0.238132] Bluetooth: SCO socket layer initialized
[ 0.239202] rockchip-cpuinfo cpuinfo: Serial : db88e99c900a6478
[ 0.240310] clocksource: Switched to clocksource arch_sys_counter
[ 0.290037] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.290956] NET: Registered protocol family 2
[ 0.291794] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.292697] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.294246] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.294954] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.295678] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.296650] NET: Registered protocol family 1
[ 0.297348] RPC: Registered named UNIX socket transport module.
[ 0.297875] RPC: Registered udp transport module.
[ 0.298295] RPC: Registered tcp transport module.
[ 0.298726] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.299320] PCI: CLS 0 bytes, default 64
[ 0.300427] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.301229] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.305079] Initialise system trusted keyring
[ 0.313470] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.314734] NFS: Registering the id_resolver key type
[ 0.315196] Key type id_resolver registered
[ 0.315586] Key type id_legacy registered
[ 0.316160] fuse init (API version 7.23)
[ 0.316855] SGI XFS with security attributes, no debug enabled
[ 0.322265] NET: Registered protocol family 38
[ 0.322707] Key type asymmetric registered
[ 0.323078] Asymmetric key parser 'x509' registered
[ 0.323679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.324352] io scheduler noop registered
[ 0.324710] io scheduler deadline registered
[ 0.325205] io scheduler cfq registered (default)
[ 0.327953] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: invalid resource
[ 0.329392] phy phy-ff770000.syscon:phy@f780.0: Looking up phy-supply from device tree
[ 0.329404] phy phy-ff770000.syscon:phy@f780.0: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
[ 0.330406] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply from device tree
[ 0.330421] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply property in node /power-management@ff310000/power-controller failed
[ 0.330869] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply from device tree
[ 0.330883] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply property in node /power-management@ff310000/power-controller failed
[ 0.331237] phy phy-pcie-phy.1: Looking up phy-supply from device tree
[ 0.331247] phy phy-pcie-phy.1: Looking up phy-supply property in node /pcie-phy failed
[ 0.333342] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
[ 0.333353] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
[ 0.333383] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
[ 0.333630] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
[ 0.333642] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed
[ 0.333661] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 0.334224] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
[ 0.334234] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
[ 0.334248] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 0.334821] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
[ 0.334831] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
[ 0.334846] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 0.335416] rockchip-pcie f8000000.pcie: missing "memory-region" property
[ 0.336019] PCI host bridge /pcie@f8000000 ranges:
[ 0.336461] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[ 0.336920] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[ 0.381151] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 0.381753] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 0.382247] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 0.382867] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 0.383742] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[ 0.383845] pci 0000:00:00.0: supports D1
[ 0.383854] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.384097] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.384929] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-1f] (conflicts with (null) [bus 00-1f])
[ 0.384971] pci 0000:01:00.0: [1cd7:0052] type 00 class 0x040000
[ 0.385025] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff]
[ 0.385158] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.387349] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.387383] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
[ 0.387984] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa03ffff]
[ 0.388598] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.389048] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.389706] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.390474] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.391093] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.391684] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[ 0.391790] aer 0000:00:00.0:pcie02: service driver aer loaded
[ 0.392340] pwm-backlight backlight: GPIO lookup for consumer enable
[ 0.392349] pwm-backlight backlight: using device tree for GPIO lookup
[ 0.392359] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]'
[ 0.392368] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]'
[ 0.392376] pwm-backlight backlight: using lookup tables for GPIO lookup
[ 0.392385] pwm-backlight backlight: lookup for GPIO enable failed
[ 0.392396] pwm-backlight backlight: Looking up power-supply from device tree
[ 0.392405] pwm-backlight backlight: Looking up power-supply property in node /backlight failed
[ 0.392419] backlight supply power not found, using dummy regulator
[ 0.393487] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
[ 0.393499] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
[ 0.393515] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.394381] rk-vcodec ff650000.vpu_service: probe device
[ 0.395059] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 0.396265] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.396902] rk-vcodec ff650000.vpu_service: init success
[ 0.397602] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
[ 0.397613] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
[ 0.397630] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.398628] rk-vcodec ff660000.rkvdec: probe device
[ 0.399244] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 0.400217] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.400806] rk-vcodec ff660000.rkvdec: init success
[ 0.402768] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.403449] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.405709] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.406390] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.408448] pwm-regulator vdd-log: GPIO lookup for consumer enable
[ 0.408457] pwm-regulator vdd-log: using device tree for GPIO lookup
[ 0.408468] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
[ 0.408477] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
[ 0.408485] pwm-regulator vdd-log: using lookup tables for GPIO lookup
[ 0.408493] pwm-regulator vdd-log: lookup for GPIO enable failed
[ 0.408534] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.408544] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.408569] vdd_log: 800 <--> 1100 mV at 1007 mV
[ 0.408731] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.408741] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.408796] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.408806] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.409248] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 0.410473] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.411627] rockchip-pinctrl pinctrl: pin gpio4-19 already requested by fiq-debugger; cannot claim for ff1a0000.serial
[ 0.412580] rockchip-pinctrl pinctrl: pin-147 (ff1a0000.serial) status -22
[ 0.413190] rockchip-pinctrl pinctrl: could not request pin 147 (gpio4-19) from group uart2c-xfer on device rockchip-pinctrl
[ 0.414190] dw-apb-uart ff1a0000.serial: Error applying setting, reverse things back
[ 0.415030] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
[ 0.417025] [drm] Initialized drm 1.1.0 20060810
[ 0.421605] [drm] Rockchip DRM driver version: v1.0.1
[ 0.424363] mali ff9a0000.gpu: Looking up mali-supply from device tree
[ 0.424388] mali ff9a0000.gpu: Failed to get regulator
[ 0.424846] mali ff9a0000.gpu: Power control initialization failed
[ 0.425443] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply from device tree
[ 0.425455] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@ff310000/power-controller failed
[ 0.425774] Unable to detect cache hierarchy for CPU 0
[ 0.427018] brd: module loaded
[ 0.432430] loop: module loaded
[ 0.433232] zram: Added device: zram0
[ 0.433914] lkdtm: No crash points registered, enable through debugfs
[ 0.436101] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[ 0.436707] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[ 0.437292] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[ 0.438713] register spi return v = :0
[ 0.439899] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
[ 0.439992] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.440628] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2e).
[ 0.441133] rk_gmac-dwmac fe300000.ethernet: RX delay(0x13).
[ 0.441660] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.442394] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 0.443013] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.448565] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.449174] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.449628] Ring mode enabled
[ 0.449899] DMA HW capability register supported
[ 0.450296] Normal descriptors
[ 0.450610] RX Checksum Offload Engine supported (type 2)
[ 0.451098] TX Checksum insertion supported
[ 0.451480] Wake-Up On Lan supported
[ 0.451839] Enable RX Mitigation via HW Watchdog Timer
[ 0.452417] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
[ 0.517752] libphy: stmmac: probed
[ 0.518070] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.518663] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.521480] usbcore: registered new interface driver rndis_wlan
[ 0.522168] Rockchip WiFi SYS interface (V1.00) ...
[ 0.522719] usbcore: registered new interface driver rtl8150
[ 0.523263] usbcore: registered new interface driver r8152
[ 0.523820] usbcore: registered new interface driver asix
[ 0.524360] usbcore: registered new interface driver ax88179_178a
[ 0.524941] usbcore: registered new interface driver cdc_ether
[ 0.525511] usbcore: registered new interface driver rndis_host
[ 0.526113] usbcore: registered new interface driver cdc_ncm
[ 0.526670] usbcore: registered new interface driver qmi_wwan
[ 0.527229] usbcore: registered new interface driver cdc_mbim
[ 0.529728] rockchip-dwc3 usb0: failed to get drvdata dwc3
[ 0.530354] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply from device tree
[ 0.530370] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply property in node /power-management@ff310000/power-controller failed
[ 0.531603] rockchip-dwc3 usb1: failed to get drvdata dwc3
[ 0.533598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.534195] ehci-pci: EHCI PCI platform driver
[ 0.534700] ehci-platform: EHCI generic platform driver
[ 0.536118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.536700] ohci-platform: OHCI generic platform driver
[ 0.538573] usbcore: registered new interface driver cdc_acm
[ 0.539074] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.539843] usbcore: registered new interface driver cdc_wdm
[ 0.540407] usbcore: registered new interface driver uas
[ 0.540937] usbcore: registered new interface driver usb-storage
[ 0.541581] usbcore: registered new interface driver usbserial
[ 0.542132] usbcore: registered new interface driver usbserial_generic
[ 0.542758] usbserial: USB Serial support registered for generic
[ 0.543348] usbcore: registered new interface driver ch341
[ 0.543865] usbserial: USB Serial support registered for ch341-uart
[ 0.544477] usbcore: registered new interface driver cp210x
[ 0.544995] usbserial: USB Serial support registered for cp210x
[ 0.545573] usbcore: registered new interface driver ftdi_sio
[ 0.546114] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.546823] usbcore: registered new interface driver keyspan
[ 0.547368] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 0.548090] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 0.548781] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 0.549471] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 0.550160] usbcore: registered new interface driver option
[ 0.550694] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.551368] usbcore: registered new interface driver oti6858
[ 0.551900] usbserial: USB Serial support registered for oti6858
[ 0.552491] usbcore: registered new interface driver pl2303
[ 0.553009] usbserial: USB Serial support registered for pl2303
[ 0.553588] usbcore: registered new interface driver qcserial
[ 0.554128] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.554799] usbcore: registered new interface driver sierra
[ 0.555337] usbserial: USB Serial support registered for Sierra USB modem
[ 0.557340] usbcore: registered new interface driver usbtouchscreen
[ 0.558129] .. rk pwm remotectl v1.1 init
[ 0.558743] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[ 0.559838] sensor_register_slave:mma8452,id=17
[ 0.560244] sensor_register_slave:lis3dh,id=7
[ 0.560653] sensor_register_slave:mma7660,id=18
[ 0.561057] sensor_register_slave:lsm303d,id=22
[ 0.561468] sensor_register_slave:gs_mc3230,id=23
[ 0.561888] [Gsensor] gsensor_init
[ 0.562210] sensor_register_slave:mpu6880_acc,id=24
[ 0.562656] sensor_register_slave:mpu6500_acc,id=25
[ 0.563094] sensor_register_slave:lsm330_acc,id=26
[ 0.563527] sensor_register_slave:akm8975,id=30
[ 0.563930] sensor_register_slave:akm8963,id=31
[ 0.564341] sensor_register_slave:l3g4200d,id=45
[ 0.564754] sensor_register_slave:l3g20d,id=46
[ 0.565157] sensor_register_slave:ewtsa,id=47
[ 0.565556] sensor_register_slave:lsm330_gyro,id=51
[ 0.565993] sensor_register_slave:cm3217,id=53
[ 0.566403] sensor_register_slave:cm3218,id=54
[ 0.567340] i2c /dev entries driver
[ 0.568525] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
[ 0.568535] fan53555-regulator 0-0040: using device tree for GPIO lookup
[ 0.568566] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
[ 0.568957] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.569592] fan53555-regulator 0-0040: Looking up vin-supply from device tree
[ 0.569654] fan53555-reg: supplied by vcc5v0_sys
[ 0.570068] vcc5v0_sys: could not add device link regulator.14 err -2
[ 0.571207] vdd_cpu_b: 712 <--> 1500 mV at 800 mV
[ 0.571587] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.571600] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.571835] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
[ 0.571844] fan53555-regulator 0-0041: using device tree for GPIO lookup
[ 0.571874] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
[ 0.572219] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.572853] fan53555-regulator 0-0041: Looking up vin-supply from device tree
[ 0.572897] fan53555-reg: supplied by vcc5v0_sys
[ 0.573321] vcc5v0_sys: could not add device link regulator.15 err -2
[ 0.574466] vdd_gpu: 712 <--> 1500 mV at 800 mV
[ 0.574824] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.574835] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.575518] rk808 0-001b: Pmic Chip id: 0x0
[ 0.578581] rk808 0-001b: GPIO lookup for consumer dvs
[ 0.578590] rk808 0-001b: using device tree for GPIO lookup
[ 0.578601] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
[ 0.578611] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
[ 0.578618] rk808 0-001b: using lookup tables for GPIO lookup
[ 0.578627] rk808 0-001b: lookup for GPIO dvs failed
[ 0.578635] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.579184] rk808 0-001b: GPIO lookup for consumer dvs
[ 0.579191] rk808 0-001b: using device tree for GPIO lookup
[ 0.579199] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
[ 0.579208] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
[ 0.579215] rk808 0-001b: using lookup tables for GPIO lookup
[ 0.579222] rk808 0-001b: lookup for GPIO dvs failed
[ 0.579229] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.579833] rk808 0-001b: Looking up vcc1-supply from device tree
[ 0.579894] DCDC_REG1: supplied by vcc3v3_sys
[ 0.580284] vcc3v3_sys: could not add device link regulator.16 err -2
[ 0.580745] vdd_center: 750 <--> 1350 mV at 900 mV
[ 0.580968] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.580979] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.581030] rk808 0-001b: Looking up vcc2-supply from device tree
[ 0.581070] DCDC_REG2: supplied by vcc3v3_sys
[ 0.581476] vcc3v3_sys: could not add device link regulator.17 err -2
[ 0.581772] vdd_cpu_l: 750 <--> 1350 mV at 800 mV
[ 0.581981] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.581992] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.582039] rk808 0-001b: Looking up vcc3-supply from device tree
[ 0.582079] DCDC_REG3: supplied by vcc3v3_sys
[ 0.582484] vcc3v3_sys: could not add device link regulator.18 err -2
[ 0.582514] vcc_ddr: at 3300 mV
[ 0.582691] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.582702] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.582753] rk808 0-001b: Looking up vcc4-supply from device tree
[ 0.582792] DCDC_REG4: supplied by vcc3v3_sys
[ 0.583181] vcc3v3_sys: could not add device link regulator.19 err -2
[ 0.583375] vcc_1v8: 1800 mV
[ 0.583578] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.583589] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.583641] rk808 0-001b: Looking up vcc6-supply from device tree
[ 0.583680] LDO_REG1: supplied by vcc3v3_sys
[ 0.584058] vcc3v3_sys: could not add device link regulator.20 err -2
[ 0.584895] vcca1v8_codec: 1800 mV
[ 0.585106] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.585117] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.585171] rk808 0-001b: Looking up vcc6-supply from device tree
[ 0.585209] LDO_REG2: supplied by vcc3v3_sys
[ 0.585605] vcc3v3_sys: could not add device link regulator.21 err -2
[ 0.586314] vcc1v8_hdmi: 1800 mV
[ 0.586523] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.586533] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.586589] rk808 0-001b: Looking up vcc7-supply from device tree
[ 0.586628] LDO_REG3: supplied by vcc3v3_sys
[ 0.587006] vcc3v3_sys: could not add device link regulator.22 err -2
[ 0.587705] vcc1v8_pmu: 1800 mV
[ 0.587915] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.587925] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.587985] rk808 0-001b: Looking up vcc9-supply from device tree
[ 0.588022] LDO_REG4: supplied by vcc3v3_sys
[ 0.588416] vcc3v3_sys: could not add device link regulator.23 err -2
[ 0.589119] vccio_sd: 1800 <--> 3000 mV at 3000 mV
[ 0.589345] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.589355] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.589416] rk808 0-001b: Looking up vcc9-supply from device tree
[ 0.589457] LDO_REG5: supplied by vcc3v3_sys
[ 0.589838] vcc3v3_sys: could not add device link regulator.24 err -2
[ 0.590533] vcca3v0_codec: 3000 mV
[ 0.590733] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.590744] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.590810] rk808 0-001b: Looking up vcc10-supply from device tree
[ 0.590850] LDO_REG6: supplied by vcc3v3_sys
[ 0.591228] vcc3v3_sys: could not add device link regulator.25 err -2
[ 0.591939] vcc_1v5: 1500 mV
[ 0.592142] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.592153] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.592219] rk808 0-001b: Looking up vcc7-supply from device tree
[ 0.592258] LDO_REG7: supplied by vcc3v3_sys
[ 0.592654] vcc3v3_sys: could not add device link regulator.26 err -2
[ 0.593351] vcca0v9_hdmi: 900 mV
[ 0.593563] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.593573] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.593640] rk808 0-001b: Looking up vcc11-supply from device tree
[ 0.593680] LDO_REG8: supplied by vcc3v3_sys
[ 0.594058] vcc3v3_sys: could not add device link regulator.27 err -2
[ 0.594754] vcc_3v0: 3000 mV
[ 0.594971] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.594981] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.595048] rk808 0-001b: Looking up vcc8-supply from device tree
[ 0.595086] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.595502] vcc3v3_sys: could not add device link regulator.28 err -2
[ 0.595531] vcc3v3_s3: at 3300 mV
[ 0.595719] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.595729] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.595800] rk808 0-001b: Looking up vcc12-supply from device tree
[ 0.595838] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.596239] vcc3v3_sys: could not add device link regulator.29 err -2
[ 0.596267] vcc3v3_s0: at 3300 mV
[ 0.596456] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[ 0.596466] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[ 0.599657] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 0.600677] of_get_named_gpiod_flags: parsed 'pmic,hold-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' - status (0)
[ 0.600715] of_get_named_gpiod_flags: can't parse 'pmic,stby-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
[ 0.600725] rk808 0-001b: Can not read property pmic,stby-gpio
[ 0.601267] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80093f6000
[ 0.602673] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80093f8000
[ 0.603901] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80093fa000
[ 0.605268] fusb302 7-0022: GPIO lookup for consumer int-n
[ 0.605278] fusb302 7-0022: using device tree for GPIO lookup
[ 0.605325] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff160000/fusb30x@22[0]' - status (0)
[ 0.605351] fusb302 7-0022: GPIO lookup for consumer vbus-5v
[ 0.605358] fusb302 7-0022: using device tree for GPIO lookup
[ 0.605367] of_get_named_gpiod_flags: can't parse 'vbus-5v-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605376] of_get_named_gpiod_flags: can't parse 'vbus-5v-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605383] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.605392] fusb302 7-0022: lookup for GPIO vbus-5v failed
[ 0.605400] fusb302 7-0022: GPIO lookup for consumer vbus-other
[ 0.605407] fusb302 7-0022: using device tree for GPIO lookup
[ 0.605415] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605424] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605431] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.605438] fusb302 7-0022: lookup for GPIO vbus-other failed
[ 0.605446] fusb302 7-0022: GPIO lookup for consumer discharge
[ 0.605454] fusb302 7-0022: using device tree for GPIO lookup
[ 0.605462] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605470] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605477] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.605484] fusb302 7-0022: lookup for GPIO discharge failed
[ 0.605493] fusb302 7-0022: GPIO lookup for consumer charge-en
[ 0.605499] fusb302 7-0022: using device tree for GPIO lookup
[ 0.605507] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605516] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.605522] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.605529] fusb302 7-0022: lookup for GPIO charge-en failed
[ 0.605697] fusb302 7-0022: Can't get property of role, set role to default DRP
[ 0.606513] fusb302 7-0022: fusb302 send extcon to disable vbus 5v
[ 0.609785] fusb302 7-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 0.610710] mp8859 7-0066: GPIO lookup for consumer charge-en
[ 0.610719] mp8859 7-0066: using device tree for GPIO lookup
[ 0.610727] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff160000/mp8859@66[0]'
[ 0.610736] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff160000/mp8859@66[0]'
[ 0.610743] mp8859 7-0066: using lookup tables for GPIO lookup
[ 0.610751] mp8859 7-0066: lookup for GPIO charge-en failed
[ 0.611462] mp8859 7-0066: set mp8859 out 12v ok
[ 0.611873] mp8859 7-0066: register ext0 dev0
[ 0.612407] mp8859 7-0066: mp8859 probe successful
[ 0.612852] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80093fc000
[ 0.614318] rockchip-pinctrl pinctrl: pin gpio1-1 already requested by vcc_mipi; cannot claim for 4-0022
[ 0.615150] rockchip-pinctrl pinctrl: pin-33 (4-0022) status -22
[ 0.615701] rockchip-pinctrl pinctrl: could not request pin 33 (gpio1-1) from group fusb1-int on device rockchip-pinctrl
[ 0.616669] fusb302 4-0022: Error applying setting, reverse things back
[ 0.617336] fusb302 4-0022: GPIO lookup for consumer int-n
[ 0.617344] fusb302 4-0022: using device tree for GPIO lookup
[ 0.617374] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[ 0.617398] fusb302 4-0022: GPIO lookup for consumer vbus-5v
[ 0.617406] fusb302 4-0022: using device tree for GPIO lookup
[ 0.617432] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[ 0.617458] fusb302 4-0022: GPIO lookup for consumer vbus-other
[ 0.617465] fusb302 4-0022: using device tree for GPIO lookup
[ 0.617475] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.617483] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.617491] fusb302 4-0022: using lookup tables for GPIO lookup
[ 0.617498] fusb302 4-0022: lookup for GPIO vbus-other failed
[ 0.617506] fusb302 4-0022: GPIO lookup for consumer discharge
[ 0.617513] fusb302 4-0022: using device tree for GPIO lookup
[ 0.617521] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.617529] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.617536] fusb302 4-0022: using lookup tables for GPIO lookup
[ 0.617543] fusb302 4-0022: lookup for GPIO discharge failed
[ 0.617551] fusb302 4-0022: GPIO lookup for consumer charge-en
[ 0.617558] fusb302 4-0022: using device tree for GPIO lookup
[ 0.617566] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.617574] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.617581] fusb302 4-0022: using lookup tables for GPIO lookup
[ 0.617588] fusb302 4-0022: lookup for GPIO charge-en failed
[ 0.617731] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 0.626662] fusb302 4-0022: port 1 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 0.627482] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80093fe000
[ 0.629282] IR NEC protocol handler initialized
[ 0.630534] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.00
[ 0.631115] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[ 0.632852] rkisp1 ff910000.rkisp1: GPIO lookup for consumer vsirq
[ 0.632862] rkisp1 ff910000.rkisp1: using device tree for GPIO lookup
[ 0.632872] of_get_named_gpiod_flags: can't parse 'vsirq-gpios' property of node '/rkisp1@ff910000[0]'
[ 0.632880] of_get_named_gpiod_flags: can't parse 'vsirq-gpio' property of node '/rkisp1@ff910000[0]'
[ 0.632888] rkisp1 ff910000.rkisp1: using lookup tables for GPIO lookup
[ 0.632896] rkisp1 ff910000.rkisp1: lookup for GPIO vsirq failed
[ 0.633214] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.00
[ 0.633812] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[ 0.635542] rkisp1 ff920000.rkisp1: GPIO lookup for consumer vsirq
[ 0.635552] rkisp1 ff920000.rkisp1: using device tree for GPIO lookup
[ 0.635563] of_get_named_gpiod_flags: can't parse 'vsirq-gpios' property of node '/rkisp1@ff920000[0]'
[ 0.635572] of_get_named_gpiod_flags: can't parse 'vsirq-gpio' property of node '/rkisp1@ff920000[0]'
[ 0.635579] rkisp1 ff920000.rkisp1: using lookup tables for GPIO lookup
[ 0.635588] rkisp1 ff920000.rkisp1: lookup for GPIO vsirq failed
[ 0.635848] usbcore: registered new interface driver uvcvideo
[ 0.636377] USB Video Class driver (1.1.1)
[ 0.636813] cw201x 2-0062: design_capacity missing!
[ 0.669270] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 0.670241] cw201x 2-0062: cw2015/cw2013 driver v1.2 probe sucess
[ 0.671493] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
[ 0.671714] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
[ 0.671773] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
[ 0.671831] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
[ 0.671886] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
[ 0.673872] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 0.674821] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 0.676335] Bluetooth: Virtual HCI driver ver 1.5
[ 0.676884] Bluetooth: HCI UART driver ver 2.3
[ 0.677283] Bluetooth: HCI UART protocol H4 registered
[ 0.677751] Bluetooth: HCI UART protocol LL registered
[ 0.678207] Bluetooth: HCI UART protocol ATH3K registered
[ 0.678752] usbcore: registered new interface driver bfusb
[ 0.679286] usbcore: registered new interface driver btusb
[ 0.680381] cpu cpu0: bin=1
[ 0.680683] cpu cpu0: leakage=21
[ 0.681024] cpu cpu0: Looking up cpu-supply from device tree
[ 0.693716] cpu cpu0: temp=63125, pvtm=148332 (146880 + 1452)
[ 0.694458] cpu cpu0: pvtm-volt-sel=1
[ 0.694841] cpu cpu0: bin-scale=34
[ 0.695479] cpu cpu4: bin=1
[ 0.695778] cpu cpu4: leakage=37
[ 0.696089] cpu cpu4: Looking up cpu-supply from device tree
[ 0.708930] cpu cpu4: temp=63125, pvtm=155285 (154515 + 770)
[ 0.710578] cpu cpu4: pvtm-volt-sel=2
[ 0.710952] cpu cpu4: bin-scale=17
[ 0.711555] cpu cpu0: Looking up cpu-supply from device tree
[ 0.711830] cpu cpu0: Looking up cpu-supply from device tree
[ 0.712432] cpu cpu0: avs=0, target-scale=34
[ 0.712882] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 0.714136] cpu cpu4: Looking up cpu-supply from device tree
[ 0.714797] cpu cpu4: avs=0, target-scale=17
[ 0.715246] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 0.717283] sdhci: Secure Digital Host Controller Interface driver
[ 0.717848] sdhci: Copyright(c) Pierre Ossman
[ 0.718239] Synopsys Designware Multimedia Card Interface Driver
[ 0.719721] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.720406] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 0.721012] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 0.721566] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.722452] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
[ 0.722463] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
[ 0.722496] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
[ 0.722506] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
[ 0.722529] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 0.723078] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 0.723646] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
[ 0.723653] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
[ 0.723664] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
[ 0.723673] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
[ 0.723681] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
[ 0.723689] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
[ 0.723915] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply from device tree
[ 0.723927] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply property in node /power-management@ff310000/power-controller failed
[ 0.724610] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.725271] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.725889] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.726445] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[ 0.727321] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 0.728035] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
[ 0.728132] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
[ 0.728203] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
[ 0.728211] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[ 0.728221] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
[ 0.728230] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
[ 0.728238] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[ 0.728246] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
[ 0.728255] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
[ 0.728263] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[ 0.728271] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
[ 0.728280] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
[ 0.728288] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[ 0.728295] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
[ 0.728476] vccio_sd: unsupportable voltage range: 3300000-3000000uV
[ 0.729050] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.729719] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.741372] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.747567] fusb302 7-0022: CC connected in CC1 as UFP
[ 0.752452] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.753729] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.755319] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
[ 0.755331] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
[ 0.755346] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
[ 0.755358] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
[ 0.755369] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
[ 0.755380] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
[ 0.756525] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
[ 0.756540] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
[ 0.756608] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
[ 0.756628] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
[ 0.756653] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.757196] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 0.784345] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 0.786355] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power[0]' - status (0)
[ 0.786613] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/user[0]' - status (0)
[ 0.786994] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.788136] usbcore: registered new interface driver usbhid
[ 0.788664] usbhid: USB HID core driver
[ 0.789231] inv_mpu_iio: inv_mpu_init:746
[ 0.792225] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[ 0.797738] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
[ 0.799899] usbcore: registered new interface driver snd-usb-audio
[ 0.806251] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
[ 0.806949] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
[ 0.807842] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.809058] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.809686] Initializing XFRM netlink socket
[ 0.810725] NET: Registered protocol family 10
[ 0.812686] NET: Registered protocol family 17
[ 0.813109] NET: Registered protocol family 15
[ 0.814118] Bluetooth: RFCOMM socket layer initialized
[ 0.814630] Bluetooth: RFCOMM ver 1.11
[ 0.814993] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.815536] Bluetooth: HIDP socket layer initialized
[ 0.816037] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 0.816808] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 0.817270] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[ 0.817887] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 0.818524] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 0.819182] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
[ 0.819190] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
[ 0.819198] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
[ 0.819238] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
[ 0.819245] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[ 0.820050] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 0.820823] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 0.821312] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 0.821822] [BT_RFKILL]: Enter rfkill_rk_init
[ 0.822685] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
[ 0.822693] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 0.823551] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
[ 0.823573] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[ 0.823578] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[ 0.824287] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[ 0.824292] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 0.825009] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
[ 0.825014] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[ 0.825739] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[ 0.826382] [BT_RFKILL]: Request irq for bt wakeup host
[ 0.826888] [BT_RFKILL]: ** disable irq
[ 0.827352] [BT_RFKILL]: bt_default device registered.
[ 0.827869] Key type dns_resolver registered
[ 0.828464] sensor_register_slave:mpu6880_gyro,id=50
[ 0.829700] ov13850 1-0036: GPIO lookup for consumer reset
[ 0.829713] ov13850 1-0036: using device tree for GPIO lookup
[ 0.829752] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/ov13850@36[0]' - status (0)
[ 0.829810] ov13850 1-0036: Looking up avdd-supply from device tree
[ 0.830018] ov13850 1-0036: Looking up dovdd-supply from device tree
[ 0.830118] ov13850 1-0036: Looking up dvdd-supply from device tree
[ 0.830545] ov13850 1-0036: GPIO lookup for consumer pwdn
[ 0.830556] ov13850 1-0036: using device tree for GPIO lookup
[ 0.830595] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff110000/ov13850@36[0]' - status (0)
[ 0.832866] ov13850 1-0036: write SCCB_ID failed
[ 0.833519] ov13850: probe of 1-0036 failed with error -5
[ 0.834450] ov13850 1-0046: GPIO lookup for consumer reset
[ 0.834461] ov13850 1-0046: using device tree for GPIO lookup
[ 0.834498] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/ov13850@46[0]' - status (0)
[ 0.834538] ov13850 1-0046: Looking up avdd-supply from device tree
[ 0.834677] ov13850 1-0046: Looking up dovdd-supply from device tree
[ 0.834806] ov13850 1-0046: Looking up dvdd-supply from device tree
[ 0.835200] ov13850 1-0046: GPIO lookup for consumer pwdn
[ 0.835211] ov13850 1-0046: using device tree for GPIO lookup
[ 0.835250] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff110000/ov13850@46[0]' - status (0)
[ 0.837199] ov13850 1-0046: write SCCB_ID failed
[ 0.837889] ov13850: probe of 1-0046 failed with error -5
[ 0.839203] Registered cp15_barrier emulation handler
[ 0.839791] Registered setend emulation handler
[ 0.841768] Loading compiled-in X.509 certificates
[ 0.843078] rga2: Module initialized.
[ 0.844031] phy phy-ff770000.syscon:usb2-phy@e450.2: Looking up phy-supply from device tree
[ 0.844121] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.2 err -2
[ 0.844550] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up phy-supply from device tree
[ 0.844562] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[ 0.844925] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up vbus-supply from device tree
[ 0.844936] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[ 0.844957] phy phy-ff770000.syscon:usb2-phy@e450.3: Failed to get VBUS supply regulator
[ 0.846342] phy phy-ff770000.syscon:usb2-phy@e460.4: Looking up phy-supply from device tree
[ 0.846404] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.4 err -2
[ 0.846742] phy phy-ff770000.syscon:usb2-phy@e460.5: Looking up phy-supply from device tree
[ 0.846753] phy phy-ff770000.syscon:usb2-phy@e460.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[ 0.847030] phy phy-ff770000.syscon:usb2-phy@e460.5: Looking up vbus-supply from device tree
[ 0.847039] phy phy-ff770000.syscon:usb2-phy@e460.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[ 0.847059] phy phy-ff770000.syscon:usb2-phy@e460.5: Failed to get VBUS supply regulator
[ 0.848392] phy phy-ff7c0000.phy.6: Looking up phy-supply from device tree
[ 0.848402] phy phy-ff7c0000.phy.6: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
[ 0.848461] mp8859 7-0066: mp8859 get notify
[ 0.848518] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
[ 0.848523] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
[ 0.848862] mp8859 7-0066: mp8859 get ufp 1 dp 0
[ 0.848922] phy phy-ff800000.phy.8: Looking up phy-supply from device tree
[ 0.848927] phy phy-ff800000.phy.8: Looking up phy-supply property in node /phy@ff800000/dp-port failed
[ 0.849010] phy phy-ff800000.phy.9: Looking up phy-supply from device tree
[ 0.849015] phy phy-ff800000.phy.9: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
[ 0.849550] rockchip-drm display-subsystem: defer getting devfreq
[ 0.850365] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 0.850375] mp8859 7-0066: set mp8859 out 12v ok
[ 0.851582] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008b251e8)
[ 0.852337] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 0.853048] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008b251e8)
[ 0.854119] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 0.854734] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.855517] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 0.858139] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008b19fd8)
[ 0.859325] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[ 0.860184] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 0.860994] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008b1aff8)
[ 0.861700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.862279] [drm] No driver support for vblank timestamp query.
[ 0.918437] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.919349] vccio_sd: ramp_delay not set
[ 0.919378] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
[ 0.945830] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 1.154948] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 116
[ 1.154983] mmc0: new ultra high speed SDR50 SDXC card at address aaaa
[ 1.156534] mmcblk0: mmc0:aaaa SL128 119 GiB
[ 1.187805] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1280x720p50, type: 11
[ 1.190291] mmcblk0: p1 p2 p3 p4 p5
[ 1.221833] Freeing drm_logo memory: 616K
[ 1.298125] Console: switching to colour frame buffer device 160x45
[ 1.344925] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.352139] mali ff9a0000.gpu: Looking up mali-supply from device tree
[ 1.352448] mali ff9a0000.gpu: leakage=28
[ 1.352827] mali ff9a0000.gpu: Looking up mali-supply from device tree
[ 1.352850] vdd_gpu: could not add device link ff9a0000.gpu err -17
[ 1.352861] vdd_gpu: Failed to create debugfs directory
[ 1.366031] mali ff9a0000.gpu: temp=62500, pvtm=126167 (125915 + 252)
[ 1.370158] mali ff9a0000.gpu: pvtm-volt-sel=2
[ 1.371478] fusb302 7-0022: 0000 max vol cur 0 0
[ 1.371911] fusb302 7-0022: max vol cur 15000 3000
[ 1.372991] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 1.374146] mali ff9a0000.gpu: Protected mode not available
[ 1.376001] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 1.376743] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 1.377946] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 414; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[ 1.380826] mali ff9a0000.gpu: Probed as mali0
[ 1.387066] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[ 1.388055] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 1
[ 1.388890] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[ 1.389711] xhci-hcd xhci-hcd.10.auto: irq 232, io mem 0xfe800000
[ 1.390458] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.391060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.391701] usb usb1: Product: xHCI Host Controller
[ 1.392131] usb usb1: Manufacturer: Linux 4.4.167 xhci-hcd
[ 1.392638] usb usb1: SerialNumber: xhci-hcd.10.auto
[ 1.393815] hub 1-0:1.0: USB hub found
[ 1.394173] hub 1-0:1.0: 1 port detected
[ 1.394784] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[ 1.395521] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 2
[ 1.396250] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.397049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.397659] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.398293] usb usb2: Product: xHCI Host Controller
[ 1.398729] usb usb2: Manufacturer: Linux 4.4.167 xhci-hcd
[ 1.399215] usb usb2: SerialNumber: xhci-hcd.10.auto
[ 1.400342] hub 2-0:1.0: USB hub found
[ 1.400697] hub 2-0:1.0: 1 port detected
[ 1.402295] xhci-hcd xhci-hcd.10.auto: remove, state 1
[ 1.402801] usb usb2: USB disconnect, device number 1
[ 1.427577] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.
[ 1.428241] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.
[ 1.428961] xhci-hcd xhci-hcd.10.auto: USB bus 2 deregistered
[ 1.429838] xhci-hcd xhci-hcd.10.auto: remove, state 1
[ 1.430370] usb usb1: USB disconnect, device number 1
[ 1.431577] xhci-hcd xhci-hcd.10.auto: USB bus 1 deregistered
[ 1.489235] fusb302 7-0022: PD connected as UFP, fetching 5V
[ 1.570806] random: nonblocking pool is initialized
[ 1.590676] mp8859 7-0066: mp8859 get notify
[ 1.591081] mp8859 7-0066: mp8859 get ufp 1 dp 1
[ 1.594291] mp8859 7-0066: set mp8859 out 12v ok
[ 1.612701] phy phy-ff770000.syscon:usb2-phy@e450.3: charger = USB_DCP_CHARGER
[ 1.618631] rockchip-dwc3 usb0: USB peripheral connected
[ 1.621100] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 1.621978] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 1
[ 1.622923] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[ 1.623800] xhci-hcd xhci-hcd.11.auto: irq 233, io mem 0xfe900000
[ 1.624741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.625382] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.626025] usb usb1: Product: xHCI Host Controller
[ 1.626488] usb usb1: Manufacturer: Linux 4.4.167 xhci-hcd
[ 1.626984] usb usb1: SerialNumber: xhci-hcd.11.auto
[ 1.628402] hub 1-0:1.0: USB hub found
[ 1.628789] hub 1-0:1.0: 1 port detected
[ 1.629715] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 1.630498] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 2
[ 1.631289] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.632203] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.632833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.633489] usb usb2: Product: xHCI Host Controller
[ 1.633936] usb usb2: Manufacturer: Linux 4.4.167 xhci-hcd
[ 1.634446] usb usb2: SerialNumber: xhci-hcd.11.auto
[ 1.635803] hub 2-0:1.0: USB hub found
[ 1.636185] hub 2-0:1.0: 1 port detected
[ 1.637391] xhci-hcd xhci-hcd.11.auto: remove, state 1
[ 1.637875] usb usb2: USB disconnect, device number 1
[ 1.639216] xhci-hcd xhci-hcd.11.auto: USB bus 2 deregistered
[ 1.639979] xhci-hcd xhci-hcd.11.auto: remove, state 1
[ 1.640512] usb usb1: USB disconnect, device number 1
[ 1.641508] xhci-hcd xhci-hcd.11.auto: USB bus 1 deregistered
[ 1.644474] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.645544] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 1.646524] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 1.652383] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.653436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.654055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.654735] usb usb1: Product: EHCI Host Controller
[ 1.655186] usb usb1: Manufacturer: Linux 4.4.167 ehci_hcd
[ 1.655709] usb usb1: SerialNumber: fe380000.usb
[ 1.657643] hub 1-0:1.0: USB hub found
[ 1.658047] hub 1-0:1.0: 1 port detected
[ 1.664127] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.665640] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 1.666737] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 1.673404] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.674532] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.675153] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.675833] usb usb2: Product: EHCI Host Controller
[ 1.676284] usb usb2: Manufacturer: Linux 4.4.167 ehci_hcd
[ 1.676812] usb usb2: SerialNumber: fe3c0000.usb
[ 1.678534] hub 2-0:1.0: USB hub found
[ 1.678989] hub 2-0:1.0: 1 port detected
[ 1.681640] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.683223] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 1.684386] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[ 1.739842] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.740494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.741144] usb usb3: Product: Generic Platform OHCI controller
[ 1.741709] usb usb3: Manufacturer: Linux 4.4.167 ohci_hcd
[ 1.742206] usb usb3: SerialNumber: fe3a0000.usb
[ 1.744296] hub 3-0:1.0: USB hub found
[ 1.744785] hub 3-0:1.0: 1 port detected
[ 1.747394] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.748779] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 1.749771] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[ 1.805808] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.806448] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.807103] usb usb4: Product: Generic Platform OHCI controller
[ 1.807653] usb usb4: Manufacturer: Linux 4.4.167 ohci_hcd
[ 1.808150] usb usb4: SerialNumber: fe3e0000.usb
[ 1.809975] hub 4-0:1.0: USB hub found
[ 1.810456] hub 4-0:1.0: 1 port detected
[ 1.812776] input: adc-keys as /devices/platform/adc-keys/input/input1
[ 1.816375] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.817112] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.817802] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.818399] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 1.819360] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
[ 1.819389] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
[ 1.819479] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
[ 1.819507] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
[ 1.819555] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 1.820145] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 1.820767] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
[ 1.820789] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
[ 1.820815] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
[ 1.820838] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
[ 1.820859] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
[ 1.820882] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
[ 1.821478] platform sdio-pwrseq: GPIO lookup for consumer reset
[ 1.821500] platform sdio-pwrseq: using device tree for GPIO lookup
[ 1.821570] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
[ 1.821672] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.833516] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.845786] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[ 1.847530] rockchip-dmc dmc: Looking up center-supply from device tree
[ 1.848158] rockchip-dmc dmc: Failed to get leakage
[ 1.848749] rockchip-dmc dmc: Looking up center-supply from device tree
[ 1.848821] vdd_center: could not add device link dmc err -17
[ 1.848850] vdd_center: Failed to create debugfs directory
[ 1.848876] rockchip-dmc dmc: Failed to get pvtm
[ 1.850054] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 1.850703] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 1.851777] rockchip-dmc dmc: could not find power_model node
[ 1.853636] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
[ 1.853661] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
[ 1.854967] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.860122] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok
[ 1.861162] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[ 1.861578] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 1.864629] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card1/input2
[ 1.867774] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
[ 1.867875] gpio-5 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations
[ 1.868415] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[ 1.869707] ==gsl_ts_init==
[ 1.870102] ret=0
[ 1.870892] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply from device tree
[ 1.870925] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply property in node /power-management@ff310000/power-controller failed
[ 1.871052] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply from device tree
[ 1.871081] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@ff310000/power-controller failed
[ 1.871184] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply from device tree
[ 1.871213] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply property in node /power-management@ff310000/power-controller failed
[ 1.872132] rk808-rtc rk808-rtc: setting system clock to 2019-08-20 05:04:41 UTC (1566277481)
[ 1.873473] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 1.911142] vcc_mipi: disabling
[ 1.911473] dvdd_1v2: disabling
[ 1.911801] ret 1024
[ 1.912404] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 1.912585] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply from device tree
[ 1.912605] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply property in node /power-management@ff310000/power-controller failed
[ 1.912750] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply from device tree
[ 1.912765] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply property in node /power-management@ff310000/power-controller failed
[ 1.912878] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopl-supply from device tree
[ 1.912892] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vopl-supply property in node /power-management@ff310000/power-controller failed
[ 1.912995] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply from device tree
[ 1.913008] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply property in node /power-management@ff310000/power-controller failed
[ 1.913098] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply from device tree
[ 1.913111] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply property in node /power-management@ff310000/power-controller failed
[ 1.913224] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '14:46:49', on 'Jun 24 2019'.
[ 1.913956] Mali: Mali device driver loaded
[ 1.915333] rockchip-pinctrl pinctrl: unsupported driver strength 20
[ 1.915343] rockchip-pinctrl pinctrl: pin_config_set op failed for pin 122
[ 1.915352] usb-ext-charge usb-charge: Error applying setting, reverse things back
[ 1.915447] usb-ext-charge usb-charge: GPIO lookup for consumer charge-en
[ 1.915457] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.915505] of_get_named_gpiod_flags: parsed 'charge-en-gpios' property of node '/usb-charge[0]' - status (0)
[ 1.915546] usb-ext-charge usb-charge: GPIO lookup for consumer cur-ctl
[ 1.915554] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.915600] of_get_named_gpiod_flags: parsed 'cur-ctl-gpios' property of node '/usb-charge[0]' - status (0)
[ 1.915638] usb-ext-charge usb-charge: GPIO lookup for consumer poe-state
[ 1.915646] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.915689] of_get_named_gpiod_flags: parsed 'poe-state-gpios' property of node '/usb-charge[0]' - status (0)
[ 1.915717] usb-ext-charge usb-charge: GPIO lookup for consumer cap-led
[ 1.915725] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.915737] of_get_named_gpiod_flags: can't parse 'cap-led-gpios' property of node '/usb-charge[0]'
[ 1.915747] of_get_named_gpiod_flags: can't parse 'cap-led-gpio' property of node '/usb-charge[0]'
[ 1.915755] usb-ext-charge usb-charge: using lookup tables for GPIO lookup
[ 1.915765] usb-ext-charge usb-charge: lookup for GPIO cap-led failed
[ 1.915808] of_get_named_gpiod_flags: parsed 'bat-int' property of node '/usb-charge[0]' - status (0)
[ 1.916365] usb-ext-charge usb-charge: register ext0 dev0
[ 1.916378] usb-ext-charge usb-charge: uec get notify
[ 1.916390] usb-ext-charge usb-charge: uec get ufp 1 pd 1
[ 1.916402] usb-ext-charge usb-charge: usb status 2 battery_online 0 poe_online 0
[ 1.916424] usb-ext-charge usb-charge: probe success
[ 1.917233] ALSA device list:
[ 1.917239] #0: rockchip,hdmi
[ 1.917244] #1: rockchip-cdndp-sound
[ 1.961516] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 1.981410] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 2.096450] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[ 2.097136] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.097850] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 2.100001] hub 2-1:1.0: USB hub found
[ 2.100625] hub 2-1:1.0: 4 ports detected
[ 2.180416] usb 3-1: new low-speed USB device number 2 using ohci-platform
[ 2.368424] usb 3-1: New USB device found, idVendor=03f0, idProduct=1198
[ 2.369030] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.369694] usb 3-1: Product: HP USB 1000dpi Laser Mouse
[ 2.370175] usb 3-1: Manufacturer: HP
[ 2.378583] usb 2-1.4: new low-speed USB device number 3 using ehci-platform
[ 2.380464] input: HP HP USB 1000dpi Laser Mouse as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:03F0:1198.0001/input/input4
[ 2.432761] hid-generic 0003:03F0:1198.0001: input,hidraw0: USB HID v2.00 Mouse [HP HP USB 1000dpi Laser Mouse] on usb-fe3a0000.usb-1/input0
[ 2.433622] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.433676] VFS: Mounted root (ext4 filesystem) on device 179:5.
[ 2.441495] hid-generic 0003:03F0:1198.0002: hiddev0,hidraw1: USB HID v2.00 Device [HP HP USB 1000dpi Laser Mouse] on usb-fe3a0000.usb-1/input1
[ 2.443006] devtmpfs: mounted
[ 2.443742] Freeing unused kernel memory: 1088K
[ 2.473186] usb 2-1.4: New USB device found, idVendor=413c, idProduct=2003
[ 2.473853] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.474528] usb 2-1.4: Product: Dell USB Keyboard
[ 2.474955] usb 2-1.4: Manufacturer: Dell
[ 2.483595] input: Dell Dell USB Keyboard as /devices/platform/fe3c0000.usb/usb2/2-1/2-1.4/2-1.4:1.0/0003:413C:2003.0003/input/input5
[ 2.536817] hid-generic 0003:413C:2003.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-fe3c0000.usb-1.4/input0
[ 3.173508] cgroup: cgroup2: unknown option "nsdelegate"
[ 3.212676] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.216108] systemd[1]: Detected architecture arm64.
[ 3.242147] systemd[1]: Set hostname to <firefly>.
[ 3.793529] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 3.795101] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 3.835397] vendor storage:20160801 ret = -1
[ 3.885539] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[ 3.886273] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[ 4.460912] systemd[1]: Created slice User and Session Slice.
[ 4.462438] systemd[1]: Reached target Swap.
[ 4.463758] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.464992] systemd[1]: Reached target User and Group Name Lookups.
[ 4.466445] systemd[1]: Reached target Remote File Systems.
[ 4.468608] systemd[1]: Created slice System Slice.
[ 4.470922] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.529365] systemd[1]: Listening on udev Control Socket.
[ 4.530459] systemd[1]: Reached target Slices.
[ 4.531693] systemd[1]: Listening on udev Kernel Socket.
[ 4.533461] systemd[1]: Listening on Journal Socket.
[ 4.541024] systemd[1]: Starting Set the console keyboard layout...
[ 4.548672] systemd[1]: Mounting Kernel Debug File System...
[ 4.557857] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.584038] systemd[1]: Starting Load Kernel Modules...
[ 4.587185] systemd[1]: Listening on Syslog Socket.
[ 4.593616] systemd[1]: Starting udev Coldplug all Devices...
[ 4.595495] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.607084] systemd[1]: Starting Journal Service...
[ 4.611475] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.657090] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.661023] systemd[1]: Started Remount Root and Kernel File Systems.
[ 4.667967] systemd[1]: Started Load Kernel Modules.
[ 4.678653] systemd[1]: Mounting Kernel Configuration File System...
[ 4.686719] systemd[1]: Starting Apply Kernel Variables...
[ 4.691382] systemd[1]: Mounting FUSE Control File System...
[ 4.724005] systemd[1]: Starting Load/Save Random Seed...
[ 4.788360] systemd[1]: Started Load/Save Random Seed.
[ 4.804362] systemd[1]: Mounted Kernel Debug File System.
[ 4.805567] systemd[1]: Mounted Kernel Configuration File System.
[ 4.806872] systemd[1]: Mounted FUSE Control File System.
[ 4.813586] systemd[1]: Started Apply Kernel Variables.
[ 4.871852] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.874321] systemd[1]: Starting udev Kernel Device Manager...
[ 4.964237] systemd[1]: Started udev Coldplug all Devices.
[ 5.009674] systemd[1]: Started Set the console keyboard layout.
[ 5.010065] systemd[1]: Reached target Local File Systems (Pre).
[ 5.010234] systemd[1]: Reached target Local File Systems.
[ 5.012370] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 5.014529] systemd[1]: Starting Set console font and keymap...
[ 5.026214] systemd[1]: Started Journal Service.
[ 5.056693] systemd-journald[193]: Received request to flush runtime journal from PID 1
[ 5.935477] usb-ext-charge usb-charge: adc value = 3
[ 5.935498] usb-ext-charge usb-charge: usb status 2 battery_online 1 poe_online 0
[ 6.096806] MWEcoCapture: loading out-of-tree module taints kernel.
[ 6.098888] Eco Capture 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.646352] Eco Capture: V4L2 device registered as video8
[ 7.011929] cfg80211: World regulatory domain updated:
[ 7.011955] cfg80211: DFS Master region: unset
[ 7.011965] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.011981] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.011997] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.012011] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.012026] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.012041] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.012056] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.012069] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.012116] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.964395] [BT_RFKILL]: ENABLE UART_RTS
[ 8.074112] [BT_RFKILL]: DISABLE UART_RTS
[ 8.074263] [BT_RFKILL]: bt turn on power
[ 8.939360] file system registered
[ 8.950629] ttyS0 - failed to request DMA, use interrupt mode
[ 9.388430] read descriptors
[ 9.388457] read strings
[ 10.087824] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.914217] tty_port_close_start: tty->count = 1 port count = 2.
[ 13.369743] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.369777] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.007465] usb-ext-charge usb-charge: adc value = 4
[ 40.007497] usb-ext-charge usb-charge: usb status 2 battery_online 0 poe_online 0

Copy the code

penguin · Posted at 8/23/2019 09:21:55

[ 0.216834] reg-fixed-voltage vcc_mipi: vcc_mipi supplying 0uV
[ 0.216902] rockchip-pinctrl pinctrl: pin gpio1-17 already requested by vcc-pcie; cannot claim for dvdd-1v2
[ 0.217769] rockchip-pinctrl pinctrl: pin-49 (dvdd-1v2) status -22
[ 0.218321] rockchip-pinctrl pinctrl: could not request pin 49 (gpio1-17) from group cif-pwr on device rockchip-pinctrl
[ 0.219284] reg-fixed-voltage dvdd-1v2: Error applying setting, reverse things back
[ 0.220010] of_get_named_gpiod_flags: parsed 'gpio' property of node '/dvdd-1v2[0]' - status (0)
[ 0.220046] dvdd_1v2: no parameters
[ 0.220201] reg-fixed-voltage dvdd-1v2: dvdd_1v2 supplying 0uV

Copy the code

Some regulators have conflict GPIOs, please check your PCIe dts node.

Srikrishna · Posted at 8/29/2019 04:17:41

penguin Posted at 8/23/2019 09:21
Some regulators have conflict GPIOs, please check your PCIe dts node.

Could you provide instructions on how to check PCIe dts node?

penguin · Posted at 9/3/2019 17:40:46

Please check the log quoted before. You have to inspect the GPIOs used in PCIe dts node and dvdd-1v2 regulator node carefully.

[Linux] Error in Installing Drivers in RK 3399-PC

【Linux】 Error in Installing Drivers in RK 3399-PC