Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Board › AIO-1684JD4› Pass Guaranteed HP - HPE7-A01 - Fantastic Aruba Cert ...
New Topic
Print Previous Topic Next Topic

[Hardware] Pass Guaranteed HP - HPE7-A01 - Fantastic Aruba Certified Campus Access Professi

ronsmit570

135

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
135

【Hardware】 Pass Guaranteed HP - HPE7-A01 - Fantastic Aruba Certified Campus Access Professi

Posted at yesterday 17:30      View：4 | Replies：0        Print      Only Author   [Copy Link] 1#
DOWNLOAD the newest UpdateDumps HPE7-A01 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1HbbINPdWNWkRLNIUyH6VNMoOAEgpD8LZ
Currently HP products are important for enterprises information solutions, relative job opportunities are increasing more and more. HPE7-A01 latest dumps vce will be useful. IT skills are regarded as an important standard for enterprises. No matter which field you work in, IT staff must keep on learning to keep up with the changes. HPE7-A01 Latest Dumps vce will be a shortcut for HP certification and valid for your examinations.
HP HPE7-A01 exam is a perfect certification exam for IT professionals who want to enhance their skills and knowledge in the field of network access control and deployment. Aruba Certified Campus Access Professional Exam certification is highly regarded by IT companies worldwide and can help candidates boost their career prospects. By passing HPE7-A01 Exam, candidates can demonstrate their skills and expertise in network access control and deployment, which can lead to better job opportunities and higher salaries.
100% Free HPE7-A01 – 100% Free Test Cram | Excellent Associate Aruba Certified Campus Access Professional Exam Level ExamHPE7-A01 practice materials can expedite your review process, inculcate your knowledge of the exam and last but not the least, speed up your pace of review dramatically. The finicky points can be solved effectively by using our HPE7-A01 practice materials. Some practice materials keep droning on the useless points of knowledge. In contrast, being venerated for high quality and accuracy rate, our HPE7-A01 practice materials received high reputation for their efficiency and accuracy rate originating from your interests, and the whole review process may cushier than you have imagined before.
HP HPE7-A01 certification exam is designed for IT professionals seeking to demonstrate their expertise in deploying and managing Aruba wireless networks. Aruba is a leading provider of enterprise wireless LAN solutions, and the certification exam measures the candidate's skills in designing, implementing, and troubleshooting Aruba network infrastructures.
HP HPE7-A01 exam, also known as the Aruba Certified Campus Access Professional exam, is a certification exam designed for IT professionals who are interested in gaining expertise in designing, deploying, and managing Aruba networks. HPE7-A01 Exam is specifically targeted towards professionals who work in the field of network engineering or network administration and are interested in becoming certified Aruba experts.
HP Aruba Certified Campus Access Professional Exam Sample Questions (Q20-Q25):NEW QUESTION # 20
When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?
  • A. hello interval 100ms by default
  • B. hello interval is disabled by default
  • C. hello interval is 1s by default
  • D. hello interval is based on the value set by dead interval
Answer: C
Explanation:
Explanation
The reason is that the Inter-Switch Link Protocol (ISLP) is a protocol that enables VSX stack join and synchronization between two VSX peer switches. ISLP uses a hello interval to exchange control messages between the switches.
The hello interval is a parameter that specifies the time interval between sending hello messages. The default value of the hello interval is 1 second. The hello interval can be configured from 1 second to 10 seconds.
https://www.arubanetworks.com/te ... 200-6728/index.html

NEW QUESTION # 21
What steps are part of the Key Management workflow when a wireless device is roaming from AP1 to AP2?
(Select two.)
  • A. The Key Management service then generates R1 keys for AP2's neighbors.
  • B. A client associates and authenticates with the AP2 after roaming from AP1
  • C. The Key Management service receives from AirMatch a list of all AP2's neighbors
  • D. AP1 will cache the client's information and send it to the Key Management service
  • E. The Key Management service receives a list of all AP1 s neighbors from AirMatch.
Answer: A,D
Explanation:
Explanation
The correct steps that are part of the Key Management workflow when a wireless device is roaming from AP1 to AP2 are A and D.
A: AP1 will cache the client's information and send it to the Key Management service. This is true because when a client associates and authenticates with AP1, AP1 will generate a pairwise master key (PMK) for the client and store it in its cache. AP1 will also send the PMK and other client information, such as MAC address, VLAN, and SSID, to the Key Management service, which is a centralized service that runs on Aruba Mobility Controllers (MCs) or Mobility Master (MM) devices1. The Key Management service will use this information to facilitate fast roaming for the client.
D: The Key Management service then generates R1 keys for AP2's neighbors. This is true because when the Key Management service receives the client information from AP1, it will use the PMK to derive R0 and R1 keys for the client. R0 keys are used to generate R1 keys, which are used to generate pairwise transient keys (PTKs) for encryption. The Key Management service will distribute the R1 keys to AP2 and its neighboring APs, which are determined by AirMatch based on RF proximity2. This way, when the client roams to AP2 or any of its neighbors, it can skip the 802.1X authentication and use the R1 key to quickly generate a PTK with the new AP3.
B: The Key Management service receives from AirMatch a list of all AP2's neighbors. This is false because the Key Management service does not receive this information from AirMatch directly. AirMatch is a feature that runs on MCs or MM devices and optimizes the RF performance of Aruba devices by using machine learning algorithms. AirMatch periodically sends neighbor reports to all APs, which contain information about their nearby APs based on signal strength and interference. The APs then send these reports to the Key Management service, which uses them to determine which APs should receive R1 keys for a given client2.
C: The Key Management service receives a list of all AP1 s neighbors from AirMatch. This is false for the same reason as B. The Key Management service does not receive this information from AirMatch directly, but from the APs that send their neighbor reports.
E: A client associates and authenticates with the AP2 after roaming from AP1. This is false because a client does not need to authenticate with AP2 after roaming from AP1 if it has already authenticated with AP1 and received R1 keys from the Key Management service. The client only needs to associate with AP2 and perform a four-way handshake using the R1 key to generate a PTK for encryption3. This is called fast roaming or
802.11r roaming, and it reduces the latency and disruption caused by full authentication.1: ArubaOS 8.7 User Guide 2: ArubaOS 8.7 User Guide 3: ArubaOS 8.7 User Guide : ArubaOS 8.7 User Guide

NEW QUESTION # 22
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?
  • A.
  • B.
  • C.
  • D.
Answer: D
Explanation:
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of the client device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.
References: https://techhub.hpe.com/eginfoli ... GUID-9B8F6E8F-9C7A-
4F0D-AE7B-9D8E

NEW QUESTION # 23
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?
  • A. When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz
  • B. "The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients
  • C. The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.
  • D. The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.
Answer: C
Explanation:
multicast transmission optimization is a feature that allows the IAP to select the optimal rate for sending broadcast and multicast frames based on the lowest of unicast rates across all associated clients. When this option is enabled, multicast traffic can be sent at up to 24 Mbps.
The default rate for sending frames for 2.4 GHz is 1 Mbps and 5.0 GHz is 6 Mbps. This option is disabled by default.

NEW QUESTION # 24
A company with 10,281 employees recently deployed new HPE Aruba Networking Access Points at different branch offices. Wireless 802.IX authentication will be against a RADIUS server in the cloud. The security team is concerned that the traffic between the AP and the RADIUS server will be exposed.
What is the appropriate solution for this scenario?
  • A. Enable EAP-TLS on all wireless devices. Enable EAP-TTLS on all wireless devices.
  • B. Configure RedSec on the AP and the RADIUS server.
  • C. Enable IPSec under Data Handling in HPE Aruba Networking Central
Answer: B

NEW QUESTION # 25
......
Associate HPE7-A01 Level Exam: https://www.updatedumps.com/HP/HPE7-A01-updated-exam-dumps.html
2026 Latest UpdateDumps HPE7-A01 PDF Dumps and HPE7-A01 Exam Engine Free Share: https://drive.google.com/open?id=1HbbINPdWNWkRLNIUyH6VNMoOAEgpD8LZ
https://kr.fast2test.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list