Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Board › ROC-RK3568-PC› Exam F5CAB1 Duration, Latest F5CAB1 Test Voucher
New Topic
Print Previous Topic Next Topic

Exam F5CAB1 Duration, Latest F5CAB1 Test Voucher

karltay914

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133

Exam F5CAB1 Duration, Latest F5CAB1 Test Voucher

Posted at yesterday 23:29      View：2 | Replies：0        Print      Only Author   [Copy Link] 1#
What's more, part of that TorrentExam F5CAB1 dumps now are free: https://drive.google.com/open?id=1X9ERLFsSsWaof5UZqnnltISTTduZbiyD
If you do not quickly begin to improve your own strength, the next one facing the unemployment crisis is you. The time is very tight, and choosing our F5CAB1 study materials can save you a lot of time. And our F5CAB1 Exam Questions can really save you time and efforts. If you study with our F5CAB1 learning guide for 20 to 30 hours, then you will be able to pass the exam and get the certification.
F5 F5CAB1 Exam Syllabus Topics:
TopicDetails
Topic 1
  • BIG IP Administration Install Initial Configuration and Upgrade: This section of the exam measures skills of System Administrators and covers the lifecycle tasks for deploying and maintaining a BIG IP system. It includes installing the platform, performing initial setup, applying licenses, configuring basic networking, and planning and executing software upgrades and hotfixes.
Topic 2
  • BIG IP Administration Data Plane Concepts: This section of the exam measures skills of Network Administrators and covers how BIG IP handles application traffic on the data plane. It includes understanding flow of traffic, key data path components, basic concepts of load balancing, and how security and performance features affect user traffic.
Topic 3
  • BIG IP Administration Data Plane Configuration: This section of the exam measures skills of System Administrators and covers configuring BIG IP objects that control data plane behavior. It focuses on setting up virtual servers, pools, nodes, monitors, and profiles so that applications are delivered reliably and efficiently according to design requirements.
Topic 4
  • BIG IP Administration Support and Troubleshooting: This section of the exam measures skills of Network Administrators and covers identifying and resolving common issues that affect BIG IP operation. It focuses on using logs, statistics, diagnostic tools, and basic troubleshooting methods to restore normal traffic flow and maintain stable application delivery.
Topic 5
  • BIG IP Administration Control Plane Administration: This section of the exam measures skills of System Administrators and covers managing the control plane where BIG IP is configured and administered. It includes working with user accounts, roles, device settings, configuration management, and using the graphical interface and command line for daily administrative tasks.

Latest F5CAB1 Test Voucher & Exam Dumps F5CAB1 ProviderWe have confidence and ability to make you get large returns but just need input small investment. our F5CAB1 study materials provide a platform which help you gain knowledge in order to let you outstanding in the labor market and get satisfying job that you like. The content of our F5CAB1question torrent is easy to master and simplify the important information. It conveys more important information for F5CAB1 Exam with less answers and questions, thus the learning is easy and efficient. We believe our latest F5CAB1 exam torrent will be the best choice for you.
F5 BIG-IP Administration Install, Initial Configuration, and Upgrade Sample Questions (Q32-Q37):NEW QUESTION # 32
The monitoring team reports that the SNMP server is unable to poll data from a BIG-IP device.

What information will help the BIG-IP Administrator determine whether the issue originates from the BIG-IP system?
  • A. The "Traffic Group" setting must use a floating Traffic Group.
  • B. The "ort Lockdown" setting is preventing the SNMP server from polling data from the BIG-IP.
  • C. The "VLAN / Tunnel" setting must allow All Vlans.
  • D. The configuration on the exhibit is correct and other options should be explored.
Answer: B
Explanation:
The exhibit shows aSelf IPwith:
* VLANata
* Port Lockdown:Allow None
Impact of "Allow None" on SNMP
When a Self IP is configured with:
Port Lockdown: Allow None
the BIG-IP blocksallservices and ports except a few hardcoded HA communication ports.
This means:
* UDP/161 (SNMP)is blocked
* UDP/162 (SNMP traps)is blocked
* The SNMP server cannot poll or receive data from the BIG-IP through this Self IP SNMP relies on access through the Self IP if out-of-band (mgmt interface) is not used.
Thus, the issue is directly caused byPort Lockdown = Allow None, which prevents SNMP communication.
Why the other options are incorrect:
B). Traffic Group must use a floating Traffic Group
* SNMP polling doesnotrequire floating Self IPs.
* Floating groups apply to HA failover IPs, not SNMP functionality.
C). VLAN/Tunnel must allow All VLANs
* Self IPs are always bound to a VLAN; SNMP doesnotrequire All VLANs.
* As long as the Self IP belongs to a reachable VLAN, SNMP can work.
D). Configuration is correct
* It is not correct:Allow Noneblocks SNMP and is the problem.

NEW QUESTION # 33
The BIG-IP Administrator needs to update access to the Configuration Utility to include the172.28.31.0/24and
172.28.65.0/24networks.
From the TMOS Shell (tmsh), which command should the BIG-IP Administrator use to complete this task?
  • A. modify /sys httpd permit add { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }
  • B. modify /sys httpd allow add { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }
  • C. modify /sys httpd allow add { 172.28.31.0 172.28.65.0 }
Answer: B
Explanation:
Access to the BIG-IP Configuration Utility (TMUI) is controlled through the/sys httpd allowlist.
This list defines which IP addresses or subnets are allowed to connect to the management web interface.
To allow two new subnets-172.28.31.0/24and172.28.65.0/24-the administrator mustaddboth subnets to the existing list without removing current entries.
In tmsh, subnet entries must be specified innetwork/netmask format, for example:
172.28.31.0/255.255.255.0
The correct tmsh command to append these networks is:
modify /sys httpd allow add { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 } Why the other options are incorrect:
Option B:
* IPs are listed without masks, which is invalid for subnet-based access control.
* The system requiresnetwork/netmaskformat.
Option C:
* The command uses permit instead of allow, which is not a valid attribute of /sys httpd.
* The correct keyword must beallow.
Thus, onlyOption Acorrectly adds both permitted subnets in the proper tmsh format.

NEW QUESTION # 34
Refer to the exhibit.

An organization has purchased a BIG-IP license that includes all available modules but has chosen to provision only the modules they require.
The exhibit displays the current resource allocation from theSystem # Resource Provisioningpage.
Based on the information provided, which F5 modules have been provisioned?
  • A. LTM, APM
  • B. TMM, DNS, APS
  • C. DNS, APM
  • D. LTM, DNS, APM
Answer: D
Explanation:
The exhibit shows theCurrent Resource Allocationfor:
* CPU
* Disk
* Memory
In particular, theMemory Allocationbar displays the modules that are currently provisioned.
Memory is the most reliable indicator because BIG-IP allocates memoryonlyto modules that are actively provisioned.
From the exhibit:
* MGMT(Management) - always present
* TMM(Traffic Management Microkernel) - indicatesLTM is provisioned
* GTM- this label indicates that theDNS moduleis provisioned (GTM = Global Traffic Manager, now called DNS)
* APM- explicitly shown, indicatingAccess Policy Manageris provisioned
Therefore, the provisioned modules are:
* LTM(implied by TMM allocation)
* DNS/GTM
* APM
This matchesOption C: LTM, DNS, APM.

NEW QUESTION # 35
Which command will display thecurrent active volumeon a BIG-IP system?
  • A. tmsh show sys version
  • B. tmsh show sys software status
  • C. tmsh list sys software update
Answer: B
Explanation:
To identify which boot volume is currently active on a BIG-IP system, the correct command is:
tmsh show sys software status
This command displays:
* All installed boot volumes (HD1.1, HD1.2, HD1.3, etc.)
* The BIG-IP software version installed on each volume
* TheActivefield, indicating which volume the system is currently booted from
* The installation status ("complete", "in-progress", "allowed")
This is thestandard and authoritativeway to determine the active boot location.
Why the other options are incorrect:
A). tmsh show sys version
* Displays OS version, build, and date.
* Doesnotshow boot locations or which volume is active.
C). tmsh list sys software update
* Shows software update configurations, not boot volume status.
* Does not display which volume is active.

NEW QUESTION # 36
What are the two options for securing a BIG-IP's management interface?
(Choose two.)
  • A. Use the BIG-IP's Self-IP addresses for administrative access rather than the management interface.
  • B. Restrict administrative HTTPS and SSH access to specific IP addresses or IP ranges.
  • C. Limiting network access through the management interface to a trusted/secured network VLAN.
  • D. Block all management-interface administrative HTTPS and SSH service ports to prevent access.
Answer: B,C
Explanation:
Securing the BIG-IP management interface is a fundamental administrative responsibility. F5 best practices emphasize restricting who can reach the management port and ensuring that only authorized systems are allowed access.
A). Limiting management access to trusted network segments
F5 recommends placing the management interface on adedicated, isolated, and secured management network or VLAN, rather than exposing it to production or untrusted networks.
This reduces the attack surface by ensuring only trusted segments have visibility to administrative interfaces.
D). Restricting management access by IP or subnet
F5 BIG-IP uses the/sys httpd allowlist (for HTTPS) and configuration options insshd(for SSH) to control which IP addresses or subnets can access the device.
By specifying only known administrative IPs or ranges, unauthorized users cannot reach the login services.
Why the other options are incorrect
B). Blocking all management HTTPS/SSH ports
* This would prevent any administrative access and is not a viable security practice.
C). Using Self-IP addresses for administrative access
* F5 explicitly warns against using Self-IPs for management access unless strictly necessary.
* Self-IPs are exposed to the data plane and should not be used as the primary administrative interface.

NEW QUESTION # 37
......
We have free demo of our F5CAB1 exam questions offering the latest catalogue and brief contents for your information on the website, if you do not have thorough understanding of our F5CAB1 study materials. Many exam candidates build long-term relation with our company on the basis of our high quality F5CAB1 Guide engine. And our F5CAB1 training braindumps have became their best assistant on the way to pass the exam.
Latest F5CAB1 Test Voucher: https://www.torrentexam.com/F5CAB1-exam-latest-torrent.html
2026 Latest TorrentExam F5CAB1 PDF Dumps and F5CAB1 Exam Engine Free Share: https://drive.google.com/open?id=1X9ERLFsSsWaof5UZqnnltISTTduZbiyD
https://www.pass4test.de
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list