Open the auxiliary access

Firefly Open Source Community

   Login   |   Register   |
New_Topic
Firefly Open Source Community › Embedded Computer › IPC-M10R800-A3399C› Reliable NSE5_FSW_AD-7.6 Test Duration | NSE5_FSW_AD ...
New Topic
Print Previous Topic Next Topic

[General] Reliable NSE5_FSW_AD-7.6 Test Duration | NSE5_FSW_AD-7.6 Latest Questions

davidgr217

131

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
131

【General】 Reliable NSE5_FSW_AD-7.6 Test Duration | NSE5_FSW_AD-7.6 Latest Questions

Posted at 5 hour before      View：6 | Replies：0        Print      Only Author   [Copy Link] 1#
Have you been many years at your position but haven't got a promotion? Or are you a new comer in your company and eager to make yourself outstanding? Our NSE5_FSW_AD-7.6 exam materials can help you. After a few days' studying and practicing with our products you will easily pass the NSE5_FSW_AD-7.6 examination. God helps those who help themselves. If you choose our study materials, you will find God just by your side. The only thing you have to do is just to make your choice and study our NSE5_FSW_AD-7.6 Exam Questions. Isn't it very easy? So know more about our NSE5_FSW_AD-7.6 study guide right now!
It is believe that employers nowadays are more open to learn new knowledge, as they realize that Fortinet certification may be conducive to them in refreshing their life, especially in their career arena. We attract customers by our fabulous NSE5_FSW_AD-7.6 certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our NSE5_FSW_AD-7.6 Test Guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the Fortinet NSE 5 - FortiSwitch 7.6 Administrator learn tool compiled by our company are definitely the best choice for you.
Quiz Fortinet - NSE5_FSW_AD-7.6 –High Pass-Rate Reliable Test DurationThe PassLeaderVCE is committed to acing the Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam questions preparation quickly, simply, and smartly. To achieve this objective PassLeaderVCE is offering valid, updated, and real Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam dumps in three high-in-demand formats. These Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam questions formats are PDF dumps files, desktop practice test software, and web-based practice test software. All these three Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam dumps formats contain the real and Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) certification exam trainers.
Fortinet NSE 5 - FortiSwitch 7.6 Administrator Sample Questions (Q113-Q118):NEW QUESTION # 113
Which two statements about DHCP snooping enabled on a FortiSwitch VLAN are true? (Choose two.)
  • A. Enabling DHCP snooping on a FortiSwitch VLAN ensures requests and replies are seen by all DHCP servers.
  • B. By default, all FortiSwitch ports are set to forward client DHCP requests to untrusted ports.
  • C. switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks.
  • D. Settings related to DHCP option 82 are only configurable through the CLI
Answer: C,D
Explanation:
* Switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks (B): This feature of DHCP snooping helps prevent DHCP exhaustion attacks by ensuring that the destination MAC addresses in DHCP packets match the MAC addresses learned by the switch. This check helps prevent attackers from overwhelming the DHCP server with requests from spoofed MAC addresses.
* Settings related to DHCP option 82 are only configurable through the CLI (D): DHCP Option 82 is used for "agent information," and it's typically used in network environments where additional information between DHCP clients and servers is necessary for policy and billing purposes.
Configuration of these settings in FortiSwitch is only available through the Command Line Interface (CLI), not the Graphical User Interface (GUI).

NEW QUESTION # 114
In which two ways can you assign a FortiSwitch port to a VDOM using multi-tenancy setup? (Choose two.)
  • A. Switch the FortiLink interface to the target VDOM.
  • B. Create a virtual port pool on the FortiGate CLI.
  • C. Remove the managed FortiSwitch and allocate ports directly on FortiSwitch.
  • D. Assign a port to a VDOM directly on the managed FortiSwitch.
Answer: A,B
Explanation:
In a multi-tenancy setup on FortiGate, you can assign a FortiSwitch port to a VDOM in two primary ways:
* Switch the FortiLink Interface to the Target VDOM (A): This method involves configuring the FortiLink interface, which is the dedicated interface used to manage FortiSwitch units from FortiGate, to operate within a specific VDOM. This effectively assigns all ports on the FortiSwitch, managed through that FortiLink interface, to the designated VDOM.
* Create a Virtual Port Pool on the FortiGate CLI (C): Virtual port pools are created on FortiGate and allow ports from FortiSwitch to be grouped and assigned to a VDOM. This method is more granular and flexible, as it allows specific ports on the FortiSwitch to be dedicated to different VDOMs without requiring the entire switch or FortiLink interface to be dedicated to a single VDOM.

NEW QUESTION # 115
Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)
  • A. All hosts behind an authenticated port are allowed access after a successful authentication.
  • B. A local user database must be used to authenticate devices using the 802.1X authentication protocol.
  • C. A security policy is used to apply 802.1 authentication on a port.
  • D. All devices connecting to FortiSwitch must support 802.1X authentication.
Answer: A,D
Explanation:
* All hosts behind an authenticated port are allowed access after a successful authentication (A): Once a device on a port successfully authenticates using 802.1X, all other devices connected behind that port also gain network access. This is typical in scenarios where a switch is behind an authenticated port and not each device individually authenticates.
* All devices connecting to FortiSwitch must support 802.1X authentication (D): For a network secured with 802.1X, all devices attempting to connect through the FortiSwitch must support and participate in
802.1X authentication to gain access. This ensures that all devices on the network are authenticated before they are allowed to communicate on the network.

NEW QUESTION # 116
Refer to the exhibits.

Port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
  • A. Loop guard frame sourced from port 1 was received on port 1.
  • B. An endpoint sent a BPDU on port1 that it received from another interface.
  • C. port1 was shut down by loop guard protection.
  • D. STP triggered a loop and applied loop guard protection on port1.
Answer: C,D
Explanation:
When loop guard is enabled on port1 and port2 configured with the same native VLAN (VLAN 10), there are specific scenarios under which port1 can be shut down due to loop guard operation:
A).port1 was shut down by loop guard protection.Loop guard is a specific feature used in network environments to prevent alternative or redundant loops. When loop guard is active, it can shut down a port if it stops receiving BPDU (Bridge Protocol Data Units) on a port that is expected to receive them, assuming a loop or link failure and putting the port into an inconsistent state to prevent potential loops.
B).STP triggered a loop and applied loop guard protection on port1.If the Spanning Tree Protocol (STP) detects a loop or loss of BPDU transmissions while loop guard is enabled, it will proactively shut down the port to prevent network instability or a broadcast storm. This is an essential function of loop guard within the context of STP, providing additional protection against topology changes that could introduce loops.
References:
Additional details about loop guard functionality and STP interaction can be found in the FortiSwitch administration guides, accessible viaFortinet Documentation.

NEW QUESTION # 117
Refer to the exhibits.

An administrator has deployed two FortiSwitch devices, Core-1 and Core-2, as multichassis link aggregation group (MCLAG) peers. These switches are connected to FortiGate for FortiLink and to an access switch (Access-1) using an inter-switch link (ISL). After configuration, the administrator notices that both Core-1 and Core-2 are claiming to be the root bridge in the Multiple Spanning Tree Protocol (MSTP) topology. What explains this behavior? (Choose one answer)
  • A. Both switches share the same bridge ID because MCLAG treats them as one logical switch.
  • B. FortiGate participates in MSTP and causes both switches to assume the root bridge role.
  • C. MCLAG automatically disables STP on all peer switches.
  • D. The ISL was not configured correctly, leading to MSTP inconsistency.
Answer: A
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Multichassis Link Aggregation (MCLAG) provides node-level redundancy by grouping two physical switches together so that theyappear as a single logical switchto the rest of the network. This logical representation is critical for preventing Spanning Tree Protocol (STP) from blocking redundant uplinks from downstream client switches.
To achieve this "single switch" appearance, the MCLAG peer switches synchronize their STP state andshare the same Bridge ID, which consists of a synchronized bridge MAC address and the same bridge priority. As shown in the exhibits for Core-1 and Core-2, both switches are configured with aBridge MAC of
02090f000701and aPriority of 20480. Because they possess identical identification parameters, each physical switch in the peer group locally recognizes itself as part of the root bridge entity for the MSTP region.
This behavior is intentional and is a fundamental characteristic of MCLAG design in FortiSwitchOS. It ensures that any downstream device, such as Access-1, receives BPDUs with the same bridge ID from both Core-1 and Core-2, thereby treating them as a single high-availability neighbor rather than two separate devices. Option A is incorrect as FortiGate typically does not participate in STP calculations. Option B is incorrect because this "duplicate" root behavior is the expected sign of acorrectlyfunctioning MCLAG control plane. Option D is incorrect as STP remains active to prevent loops elsewhere in the fabric; it is merely logically simplified for the MCLAG domain.

NEW QUESTION # 118
......
Our company is a well-known multinational company, has its own complete sales system and after-sales service worldwide. In the same trade at the same time, our NSE5_FSW_AD-7.6 real study dumps have become a critically acclaimed enterprise, so, if you are preparing for the exam qualification and obtain the corresponding certificate, so our company launched NSE5_FSW_AD-7.6 exam questions are the most reliable choice of you. The service tenet of our company and all the staff work mission is: through constant innovation and providing the best quality service, make the NSE5_FSW_AD-7.6 question guide become the best customers electronic test study materials. No matter where you are, as long as you buy the NSE5_FSW_AD-7.6 real study dumps, we will provide you with the most useful and efficient learning materials. As you can see, the advantages of our research materials are as follows.
NSE5_FSW_AD-7.6 Latest Questions: https://www.passleadervce.com/Fortinet-Network-Security-Expert/reliable-NSE5_FSW_AD-7.6-exam-learning-guide.html
The practice exam online would help them pass NSE5_FSW_AD-7.6 exam at first time and they will consider to purchase practice questions if they take other exams, Fortinet Reliable NSE5_FSW_AD-7.6 Test Duration Customer first is always the principle we should follow, Fortinet Reliable NSE5_FSW_AD-7.6 Test Duration It is our pleasure to serve for each candidate, Our clients praise them highly after they use them and recognize them as the key tool to pass the NSE5_FSW_AD-7.6 certification.
Notes and tips present interesting information related to the discussion, NSE5_FSW_AD-7.6 Finally, you learn how to work with, retrieve, and persist model objects to disk using Apple's Core Data framework.
Free PDF Quiz NSE5_FSW_AD-7.6 - Latest Reliable Fortinet NSE 5 - FortiSwitch 7.6 Administrator Test DurationThe practice exam online would help them Pass NSE5_FSW_AD-7.6 Exam at first time and they will consider to purchase practice questions if they take other exams, Customer first is always the principle we should follow.
It is our pleasure to serve for each candidate, Our clients praise them highly after they use them and recognize them as the key tool to pass the NSE5_FSW_AD-7.6 certification.
To achieve that purpose, we always Exam NSE5_FSW_AD-7.6 Quizzes abide by promises of putting customers benefits on first place.
https://www.itdumpskr.com
Reply

Use props Report

Return to List
High mode
B Color Image Link Quote Code Smilies
You need to log in before you can reply Login | Register

This forum Credits Rules

  •  

Service Hotline : (+86)18688117175
Contact us
E-mail : global@t-firefly.com
Copyright © 2014-2022, FIREFLY TECHNOLOGY CO.,LTD. All Rightts Reserved. 粤ICP备14022046号-2
Quick Reply Back to top Back to list