PWM

Maverick_by_

I try to use PWM, using this link:
https://wiki.t-firefly.com/en/iCore-3568JQ/driver_pwm.html
1) There is NO kernel/arch/arm64/boot/dts/rockchip/rk3399-firefly-demo.dtsi in my /rockchip/ folder.
And i can't add the PWM DTS configuration in the DTS source file
pwm_demo: pwm_demo {
        status = "disabled";
        compatible = "firefly,rk356x-pwm";
        pwms = <&pwm1 0 10000 1>;   //pwm1WM number   0 10000WM period in nanoseconds  1:polarity
        duty_ns = <5000>;   //pwm duty cycle activation time, unit ns
    };
Is documentation wrong?
2) I don't understand what to do with this C++ code:
struct pwm_device * pwm1 = NULL;pwm0 = pwm_request(1, “firefly-pwm”);pwm_config(pwm0, 500000, 1000000);pwm_enable(pwm0);

This is kernel driver source code, necessary to rebuild kernel and write firmware to SOM, why should i change it ? I need to change PWM parameters dinamically.How can i control it ?

jackbla997

Thank you for sharing; the article is truly stunning! Upgrade your IT skills with free Pass CDPSE test guide. Wishing you good luck in your exams!

mattwhi452

Your article has made a lasting impression, thank you! Best of luck! Here are the free Test Comm-Dev-101 engine version study resources for you.

ianlewi606

This article is exceptional, I truly appreciate you sharing it! The Updated CPIM-8.0 Testkings questions were the stepping stones to my career success, and today I’m giving them away for free!

lucasmo460

Truly an extraordinary article, I’m thankful for your sharing. Valid IFC test sample provides a range of useful materials for free, hoping they help you progress.