Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

[Hardware] JN0-650 Musterprüfungsfragen - JN0-650Zertifizierung & JN0-650Testfagen

136

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
136

【Hardware】 JN0-650 Musterprüfungsfragen - JN0-650Zertifizierung & JN0-650Testfagen

Posted at 15 hour before      View:19 | Replies:0        Print      Only Author   [Copy Link] 1#
P.S. Kostenlose 2026 Juniper JN0-650 Prüfungsfragen sind auf Google Drive freigegeben von ZertSoft verfügbar: https://drive.google.com/open?id=1nGad0tt3p9_9oJMLvY9XqtLf1UA5M0PL
Die Juniper Zertifizierungen sind heute immer mehr populär, weil diese international anerkannt sind. Deshalb nehmen immer mehr Leute Juniper an Zertifizierungsprüfungen teil. Darunter ist die Juniper JN0-650 Prüfung eine der wichtigsten Prüfungen. Und, Wie können Sie sich auf die Juniper JN0-650 Prüfung vorbereiten? Lernen alle Kenntnisse sehr fleißig auswendig? Oder Benutzen die hocheffektiven Prüfungsunterlagen?
Juniper JN0-650 Prüfungsplan:
ThemaEinzelheiten
Thema 1
  • IP Multicast: This domain addresses one-to-many communication using multicast routing, covering addressing, ASM vs SSM models, RPF, IGMP
  • snooping, PIM sparse-mode, rendezvous points, Anycast RP, MSDP, and routing policies.
Thema 2
  • EVPN: This section addresses Ethernet VPN technology for Layer 2 over Layer 3 connectivity, covering EVPN route types, VXLAN encapsulation, and multi-homing configurations.
Thema 3
  • Interior Gateway Protocols (IGPs): This domain covers internal routing protocols operating within a single autonomous system, including OSPFv2, OSPFv3, and routing policy implementation, along with configuration, troubleshooting, and monitoring skills.
Thema 4
  • Ethernet Switching and Spanning Tree: This section covers advanced Layer 2 switching including filter-based VLANs, private VLANs, MVRP, Layer 2 tunneling via Q-in-Q and L2PT, plus MSTP and VSTP protocols.
Thema 5
  • BGP: This section focuses on Border Gateway Protocol operations including route selection, next hop resolution, BGP attributes, communities, load balancing, IPv4
  • IPv6 address families, advanced options, and routing policy implementation.
Thema 6
  • Layer 2 Authentication and Access Control: This domain examines network access control mechanisms including 802.1x, MAC RADIUS, captive portal, server fail fallback, guest VLANs, and multi-method authentication considerations.
Thema 7
  • Class of Service (CoS): This domain covers QoS mechanisms in Junos including CoS processing, header fields, forwarding classes, classification, policers, schedulers, drop profiles, shaping, and rewrite rules.

JN0-650 neuester Studienführer & JN0-650 Training Torrent prepNach dem Entstehen der Dumps zur Juniper JN0-650 Zertifizierungsprüfung ist es kein Traum der IT-Fachleuten mehr, die Juniper JN0-650 Zertifizierungsprüfung zu bestehen. Die Qualität der Prüfungsfragen und Antworten zur Juniper JN0-650 Zertifizierungsprüfung von ZertSoft ist hoch. Die Ähnlichkeit mit den realen Fragen beträgt 95%. ZertSoft ist Ihnen doch besitzenswert. Wenn Sie die Produkte von ZertSoft wählen, heißt das, dass Sie sich gut auf die Juniper JN0-650 Zertifizierungsprüfung vorbereitet haben. Ohne Zweifel können Sie die Juniper JN0-650 Prüfung sicher bestehen.
Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 Prüfungsfragen mit Lösungen (Q40-Q45):40. Frage
While deploying class of service on an EX Series switch, what are two aspects of the scheduler? (Choose two.)
  • A. It identifies the priority of the queue to which it is assigned.
  • B. It defines interface rate-limiting.
  • C. It provides DiffServ code translation.
  • D. It defines a buffer size of the queue to which it is assigned.
Antwort: A,D
Begründung:
In Junos OS Class of Service (CoS),schedulersare the components that define how traffic in a specific queue is treated before it is transmitted out of an interface.
* Queue Priority (Statement C):A scheduler identifies thepriorityof the queue (e.g., low, medium-low, medium-high, or high). This determines the order in which the hardware handles traffic from different queues.
* Buffer Size (Statement D):A scheduler defines thebuffer size(amount of memory) allocated to a queue, which can be specified as a percentage, a temporal value (in microseconds), or the remainder of available buffer space. This helps manage bursts of traffic and prevent tail drops.
* Other Components:Rate-limiting (Statement A) is typically handled bypolicersor interface-level shaping, while code translation (Statement B) is the role ofrewrite rules.

41. Frage
Which attribute is commonly used in BGP to influence inbound traffic?
  • A. AS Path
  • B. Local Preference
  • C. Weight
  • D. MED
Antwort: D

42. Frage
Which statement is true regarding MD5 authentication in OSPF?
  • A. Each interface on a device requires a unique key ID.
  • B. Multiple keys can be configured with different start times.
  • C. Each device on the network requires a unique key ID.
  • D. The MD5 password is not encrypted on the wire.
Antwort: B

43. Frage
Exhibit.

Referring to the exhibit, which two statements are correct? (Choose two.)
  • A. R1 will advertise the 203 0.113.0/24 route as an OSPF Type 5 LSA into Area 0
  • B. R5 will advertise the 203 0.113 0/24 route as an OSPF Type 5 LSA into Area 1.
  • C. R5 will advertise the 203 0.113.0/24 route as an OSPF Type 7 LSA into Area 1.
  • D. R1 will advertise the 203 0.113.0724 route as an OSPF Type 7 LSA into Area 0.
Antwort: A,C
Begründung:
The exhibit shows an OSPF network where Area 1 is configured as a Not-So-Stubby Area (NSSA). R5 is an Autonomous System Boundary Router (ASBR) injecting an External Route (203.0.113.0/24) into this area.
NSSA ASBR Behavior (Option D): Within an OSPF NSSA, external routes cannot be advertised as standard Type 5 LSAs because stubby areas do not support them. Instead, the ASBR (R5) advertises the external prefix using a Type 7 LSA (NSSA External LSA). This LSA is flooded throughout Area 1.
ABR Translation Behavior (Option C): When the Type 7 LSA reaches the Area Border Router (R1), the ABR is responsible for translating it into a Type 5 LSA (AS External LSA). This allows the external route to be propagated into the backbone (Area 0) and subsequently to the rest of the OSPF domain.
Incorrect Statements (A & B): Option A is incorrect because Type 7 LSAs are local to the NSSA and are never advertised into Area 0. Option B is incorrect because Type 5 LSAs are strictly prohibited within an NSSA.

44. Frage
How does OSPFv3 address the need for scalability in larger network deployments?
  • A. By using a flat network design without areas
  • B. By using virtual links to connect non-contiguous areas
  • C. By supporting more than 255 areas
  • D. By employing address summarization at area boundaries
Antwort: D

45. Frage
......
ZertSoft bieten Ihnen eine klare und ausgezeichnete Wahl und hilft Ihnen, Ihre Sorgen zu reduzieren. Möchten Sie einen frühen Erfolg? Möchten Sie Juniper JN0-650 Zertifikat schnell zu erhalten? Beeilen Sie sich, Juniper JN0-650 Prüfungsunterlagen von ZertSoft in Ihren Einkaufswagen hinzuzufügen. ZertSoft gibt Ihnen eine gute Anleitung, um sicherzustellen, dass Sie die Juniper JN0-650 Prüfung bestehen können. Mit ZertSoft können Sie ganz schnell das gewünschte Zertifikat bekommen.
JN0-650 Buch: https://www.zertsoft.com/JN0-650-pruefungsfragen.html
P.S. Kostenlose und neue JN0-650 Prüfungsfragen sind auf Google Drive freigegeben von ZertSoft verfügbar: https://drive.google.com/open?id=1nGad0tt3p9_9oJMLvY9XqtLf1UA5M0PL
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list