Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

[Android] Board can not enter Android OS

14

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
14

【Android】 Board can not enter Android OS

Posted at 5/24/2018 16:54:42      View:5233 | Replies:9        Print      Only Author   [Copy Link] 1#
U-Boot 2014.10-RK3399-06-02507-g99e11be-dirty (Dec 18 2017 - 12:28:55)

CPU: rk3399
cpu version = 0
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 800000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Board:  Rockchip platform Board
Uboot as second level loader
DRAM:  Found dram banks: 1
Adding bank:0000000000200000(00000000ffe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01000000
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment

GetParam
remotectl v0.1
pwm freq=0xb8320
pwm_freq_nstime=0x52d
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 800000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-12-18#1.09
empty serial no.
reboot normal.
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
failed to find panel driver
read logo on state from dts [1]
no fuel gauge found
can't find dts node for deviceinfo
dw_rk_hdmi_register:fail to read deviceinfo
hdmi baseparamer 0x0@0-0
[EDID-EXTEND] It is a  CEA 861 Series Extension.
no baseparametr,find best edid mode,vic=16
hdmi_dev->video.vic is 4
rk lcdc - 0 dclk set: dclk = 74250000HZ, pll select = 0, div = 1
rockchip_panel_prepare: failed to find panel prepare funcs
hdmi_dev_config_video vic 4 color_output 3 color_output_depth 8
pixel clk is 74250000 tmds clk is 74250000
hsync_pol 1 vsync_pol 1
[HDMI] sucess output HDMI.
PHY PLL not locked: PCLK_ON=1,TMDSCLK_ON=0
rockchip_panel_enable: failed to find panel prepare funcs
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
got recovery cmd from misc.
load fdt from resouce.
Secure Boot state: 0
kernel   @ 0x00280000 (0x012b2808)
ramdisk  @ 0x05bf0000 (0x007af3d4)
bootrk: do_bootm_linux...
   Loading Device Tree to 0000000005600000, end 0000000005614a1e ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:0000000009400000, 00000000eec00000
WARNING: could not set reg FDT_ERR_BADOFFSET.

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Initializing cgroup subsys schedtune
[    0.000000] Linux version 4.4.83 (zxy@ZIG-HP-Z228) (gcc version 4.9 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Thu May 24 14:55:26 CST 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] hdmi init vic is -1
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f6ef7000 s45696 r8192 d32128 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 995336
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00546000@0x000B4000(system),0x00008000@0x005FA000(metadata),0x00002000@0x00602000(baseparamer),-@0x00604000(userdata) storagemedia=emmc uboot_logo=0x02000000@0xf5c00000 loader.timestamp=2017-12-18_12:28:55 hdmi.vic=-1 SecureBootCheckOk=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xf6eaf000-0xf6eef000] (0MB) mapped at [ffffffc0f6eaf000-ffffffc0f6eeefff]
[    0.000000] Memory: 3926484K/4044800K available (11582K kernel code, 1354K rwdata, 5316K rodata, 832K init, 1079K bss, 101932K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009110000 - 0xffffff80091e0000   (   832 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008bd0000   ( 11584 KB)
[    0.000000]     .rodata : 0xffffff8008bd0000 - 0xffffff8009110000   (  5376 KB)
[    0.000000]       .data : 0xffffff80091e0000 - 0xffffff8009332808   (  1355 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2000000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2080000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2090000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.009833] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.021116] pid_max: default: 32768 minimum: 301
[    0.026269] Security Framework initialized
[    0.030809] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038173] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.046798] Initializing cgroup subsys freezer
[    0.051694] Initializing cgroup subsys debug
[    0.057213] sched-energy: Sched-energy-costs installed from DT
[    0.063636] CPU0: update cpu_capacity 401
[    0.068091] ASID allocator initialised with 65536 entries
[    0.090902] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.100969] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.124631] Detected VIPT I-cache on CPU1
[    0.124662] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.124698] CPU1: using LPI pending table @0x00000000f2200000
[    0.124741] CPU1: update cpu_capacity 401
[    0.124744] CPU1: Booted secondary processor [410fd034]
[    0.134628] Detected VIPT I-cache on CPU2
[    0.134647] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.134679] CPU2: using LPI pending table @0x00000000f2230000
[    0.134706] CPU2: update cpu_capacity 401
[    0.134710] CPU2: Booted secondary processor [410fd034]
[    0.144666] Detected VIPT I-cache on CPU3
[    0.144684] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.144716] CPU3: using LPI pending table @0x00000000f2270000
[    0.144743] CPU3: update cpu_capacity 401
[    0.144745] CPU3: Booted secondary processor [410fd034]
[    0.154714] Detected PIPT I-cache on CPU4
[    0.154741] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.154779] CPU4: using LPI pending table @0x00000000f22b0000
[    0.154820] CPU4: update cpu_capacity 1024
[    0.154823] CPU4: Booted secondary processor [410fd082]
[    0.164734] Detected PIPT I-cache on CPU5
[    0.164752] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.164788] CPU5: using LPI pending table @0x00000000f22e0000
[    0.164815] CPU5: update cpu_capacity 1024
[    0.164818] CPU5: Booted secondary processor [410fd082]
[    0.164898] Brought up 6 CPUs
[    0.307366] SMP: Total of 6 processors activated.
[    0.312537] CPU features: detected feature: GIC system register CPU interface
[    0.320380] CPU: All CPU(s) started at EL2
[    0.324917] alternatives: patching kernel code
[    0.332320] devtmpfs: initialized
[    0.349130] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.359873] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.367463] pinctrl core: initialized pinctrl subsystem
[    0.374559] Failed to find legacy iommu devices
[    0.379893] NET: Registered protocol family 16
[    0.385184] schedtune: init normalization constants...
[    0.390844] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:   222
[    0.398026] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222
[    0.405209] schedtune: CPU[1]            min_pwr:     0 max_pwr:   222
[    0.412390] schedtune: CPU[2]            min_pwr:     0 max_pwr:   222
[    0.419568] schedtune: CPU[3]            min_pwr:     0 max_pwr:   222
[    0.426749] schedtune: CLUSTER[4-5]      min_pwr:    65 max_pwr:  1108
[    0.433928] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1108
[    0.441107] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1108
[    0.448288] schedtune: SYSTEM            min_pwr:   121 max_pwr:  4434
[    0.455469] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[    0.463895] schedtune: verify normalization constants...
[    0.469737] schedtune: max_pwr/2^0: 4313 => norm_pwr:  1024
[    0.475865] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511
[    0.481992] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
[    0.488121] schedtune: max_pwr/2^3:  539 => norm_pwr:   127
[    0.494247] schedtune: max_pwr/2^4:  269 => norm_pwr:    63
[    0.500373] schedtune: max_pwr/2^5:  134 => norm_pwr:    31
[    0.506500] schedtune: configured to support 5 boost groups
[    0.525993] cpuidle: using governor ladder
[    0.543870] cpuidle: using governor menu
[    0.548220] Registered FIQ tty driver
[    0.552614] vdso: 2 pages (1 code @ ffffff8008bd6000, 1 data @ ffffff80091e4000)
[    0.560775] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.568944] DMA: preallocated 256 KiB pool for atomic allocations
[    0.612370] console [pstore0] enabled
[    0.616591] pstore: Registered ramoops as persistent store backend
[    0.623401] ramoops: attached 0xf0000@0x110000, ecc: 0/0
<hit enter to activate fiq debugger>
[    0.631665] console [ttyFIQ0] enabled
[[    0.631665] console [ttyFIQ0] enabled
[    0.638930] bootconsole [uart0] disabled
    0.638930] bootconsole [uart0] disabled
[    0.650947] Registered fiq debugger ttyFIQ0
[    0.688511] Rockchip hdmi driver version 2.0
.
[    0.690767] iommu: Adding device ff650000.vpu_service to group 0
[    0.690840] iommu: Adding device ff660000.rkvdec to group 1
[    0.690926] iommu: Adding device ff670000.iep to group 2
[    0.691019] iommu: Adding device ff8f0000.vop to group 3
[    0.691094] iommu: Adding device ff900000.vop to group 4
[    0.691193] iommu: Adding device ff910000.isp to group 5
[    0.691271] iommu: Adding device ff920000.isp to group 6
[    0.691934] rk_iommu ff670800.iommu: can't get aclk
[    0.691950] rk_iommu ff670800.iommu: can't get hclk
[    0.692784] SCSI subsystem initialized
[    0.692974] usbcore: registered new interface driver usbfs
[    0.693030] usbcore: registered new interface driver hub
[    0.693107] usbcore: registered new device driver usb
[    0.693460] media: Linux media interface: v0.10
[    0.693498] Linux video capture interface: v2.00
[    0.693630] pps_core: LinuxPPS API ver. 1 registered
[    0.693642] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.693670] PTP clock support registered
[    0.695089] Advanced Linux Sound Architecture Driver Initialized.
[    0.695541] Bluetooth: Core ver 2.21
[    0.695571] NET: Registered protocol family 31
[    0.695581] Bluetooth: HCI device and connection manager initialized
[    0.695599] Bluetooth: HCI socket layer initialized
[    0.695616] Bluetooth: L2CAP socket layer initialized
[    0.695641] Bluetooth: SCO socket layer initialized
[    0.698232] rockchip-cpuinfo cpuinfo: Serial         : 0000000000000000
[    0.698747] clocksource: Switched to clocksource arch_sys_counter
[    0.733343] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.733560] NET: Registered protocol family 2
[    0.733959] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.734145] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.734372] TCP: Hash tables configured (established 32768 bind 32768)
[    0.734453] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.734499] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.734676] NET: Registered protocol family 1
[    0.735124] Trying to unpack rootfs image as initramfs...
[    1.070512] Freeing initrd memory: 7868K
[    1.071085] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.071178] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.076656] audit: initializing netlink subsys (disabled)
[    1.076715] audit: type=2000 audit(0.953:1): initialized
[    1.084957] VFS: Disk quotas dquot_6.6.0
[    1.085079] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.086458] fuse init (API version 7.23)
[    1.087062]
[    1.087062] TEE Core Framework initialization (ver 1:0.1)
[    1.087088] TEE armv7 Driver initialization
[    1.087394] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    1.087411] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    1.087563] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    1.108481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.108506] io scheduler noop registered
[    1.108668] io scheduler cfq registered (default)
[    1.109977] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[    1.114094] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.114116] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.114134] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.635497] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.635689] rockchip-pcie: probe of f8000000.pcie failed with error 昄Lj
                                                                           [    1.637153] iep: failed to find iep power down clock source.
[    1.637739] IEP Power ON
[    1.637949] IEP Power OFF
[    1.638056] IEP Driver loaded succesfully
[    1.638250] Module initialized.
[    1.638827] rk-vcodec ff650000.vpu_service: probe device
[    1.638872] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc0f18b6810
[    1.639052] rk-vcodec ff650000.vpu_service: allocator is drm
[    1.639114] rk-vcodec ff650000.vpu_service: checking hw id 0
[    1.639586] rk-vcodec ff650000.vpu_service: init success
[    1.640104] rk-vcodec ff660000.rkvdec: probe device
[    1.640148] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc0f18b7010
[    1.640303] rk-vcodec ff660000.rkvdec: allocator is drm
[    1.640363] rk-vcodec ff660000.rkvdec: checking hw id 6876
[    1.640690] rk-vcodec ff660000.rkvdec: init success
[    1.642529] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.642550] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.644413] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.644432] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.646050] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.648016] console [ttyS0] disabled
[    1.648077] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.648835] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[    1.649548] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.649926] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[    1.654154] mali ff9a0000.gpu: Failed to get regulator
[    1.654172] mali ff9a0000.gpu: Power control initialization failed
[    1.654406] Unable to detect cache hierarchy from DT for CPU 0
[    1.674926] brd: module loaded
[    1.679426] loop: module loaded
[    1.679912] zram: Added device: zram0
[    1.680456] SCSI Media Changer driver v0.25
[    1.680915] rockchip-pinctrl pinctrl: pin gpio1-8 already requested by ff370000.serial; cannot claim for ff1d0000.spi
[    1.680936] rockchip-pinctrl pinctrl: pin-40 (ff1d0000.spi) status -22
[    1.680952] rockchip-pinctrl pinctrl: could not request pin 40 (gpio1-8) from group spi1-tx  on device rockchip-pinctrl
[    1.680969] rockchip-spi ff1d0000.spi: Error applying setting, reverse things back
[    1.681101] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[    1.681118] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    1.681710] tun: Universal TUN/TAP device driver, 1.6
[    1.681724] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.682679] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.682699] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    1.682714] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[    1.682746] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.682916] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.687935] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.688011] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.688022]  Ring mode enabled
[    1.688031]  DMA HW capability register supported
[    1.688041]  Normal descriptors
[    1.688052]  RX Checksum Offload Engine supported (type 2)
[    1.688062]  TX Checksum insertion supported
[    1.688070]  Wake-Up On Lan supported
[    1.688111]  Enable RX Mitigation via HW Watchdog Timer
[    1.753156] libphy: stmmac: probed
[    1.753171] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.753184] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.753894] PPP generic driver version 2.4.2
[    1.754046] PPP BSD Compression module registered
[    1.754065] PPP Deflate Compression module registered
[    1.754095] PPP MPPE Compression module registered
[    1.754118] NET: Registered protocol family 24
[    1.754166] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.754180] CSLIP: code copyright 1989 Regents of the University of California.
[    1.754203] Rockchip WiFi SYS interface (V1.00) ...
[    1.754284] usbcore: registered new interface driver catc
[    1.754331] usbcore: registered new interface driver kaweth
[    1.754349] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.754391] usbcore: registered new interface driver pegasus
[    1.754437] usbcore: registered new interface driver rtl8150
[    1.754481] usbcore: registered new interface driver r8152
[    1.754499] hso: drivers/net/usb/hso.c: Option Wireless
[    1.754560] usbcore: registered new interface driver hso
[    1.754610] usbcore: registered new interface driver asix
[    1.754658] usbcore: registered new interface driver ax88179_178a
[    1.754703] usbcore: registered new interface driver cdc_ether
[    1.754747] usbcore: registered new interface driver cdc_eem
[    1.754790] usbcore: registered new interface driver dm9601
[    1.754844] usbcore: registered new interface driver smsc75xx
[    1.754900] usbcore: registered new interface driver smsc95xx
[    1.754944] usbcore: registered new interface driver gl620a
[    1.754988] usbcore: registered new interface driver net1080
[    1.755031] usbcore: registered new interface driver plusb
[    1.755075] usbcore: registered new interface driver rndis_host
[    1.755122] usbcore: registered new interface driver cdc_subset
[    1.755166] usbcore: registered new interface driver zaurus
[    1.755210] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.755272] usbcore: registered new interface driver int51x1
[    1.755316] usbcore: registered new interface driver kalmia
[    1.755360] usbcore: registered new interface driver ipheth
[    1.755450] usbcore: registered new interface driver sierra_net
[    1.755500] usbcore: registered new interface driver cx82310_eth
[    1.755554] usbcore: registered new interface driver cdc_ncm
[    1.755601] usbcore: registered new interface driver qmi_wwan
[    1.755647] usbcore: registered new interface driver cdc_mbim
[    1.756755] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[    1.759795] rockchip-typec-phy ff800000.phy: mode = 0, id = 0
[    1.759817] rockchip-typec-phy ff800000.phy: new_mode = 2
[    1.759830] rockchip-typec-phy ff800000.phy: tcphy->mode = 0, new_mode = 2
[    1.762408] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    1.763396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.763418] ehci-pci: EHCI PCI platform driver
[    1.763502] ehci-platform: EHCI generic platform driver
[    1.767535] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.767569] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.767721] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    1.775443] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.775577] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.775594] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.775609] usb usb1: Product: EHCI Host Controller
[    1.775621] usb usb1: Manufacturer: Linux 4.4.83 ehci_hcd
[    1.775633] usb usb1: SerialNumber: fe3c0000.usb
[    1.776063] hub 1-0:1.0: USB hub found
[    1.776097] hub 1-0:1.0: 1 port detected
[    1.776587] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.776618] ohci-platform: OHCI generic platform driver
[    1.777072] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.777098] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.777206] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    1.832895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.832913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.832928] usb usb2: Product: Generic Platform OHCI controller
[    1.832941] usb usb2: Manufacturer: Linux 4.4.83 ohci_hcd
[    1.832953] usb usb2: SerialNumber: fe3e0000.usb
[    1.833355] hub 2-0:1.0: USB hub found
[    1.833389] hub 2-0:1.0: 1 port detected
[    1.834150] usbcore: registered new interface driver cdc_acm
[    1.834164] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.834225] usbcore: registered new interface driver usblp
[    1.834271] usbcore: registered new interface driver cdc_wdm
[    1.834317] usbcore: registered new interface driver uas
[    1.834392] usbcore: registered new interface driver usb-storage
[    1.834433] usbcore: registered new interface driver ums-alauda
[    1.834473] usbcore: registered new interface driver ums-cypress
[    1.834513] usbcore: registered new interface driver ums-datafab
[    1.834553] usbcore: registered new interface driver ums_eneub6250
[    1.834593] usbcore: registered new interface driver ums-freecom
[    1.834633] usbcore: registered new interface driver ums-isd200
[    1.834672] usbcore: registered new interface driver ums-jumpshot
[    1.834715] usbcore: registered new interface driver ums-karma
[    1.834755] usbcore: registered new interface driver ums-onetouch
[    1.834796] usbcore: registered new interface driver ums-sddr09
[    1.834836] usbcore: registered new interface driver ums-sddr55
[    1.834875] usbcore: registered new interface driver ums-usbat
[    1.834951] usbcore: registered new interface driver usbserial
[    1.834988] usbcore: registered new interface driver usbserial_generic
[    1.835022] usbserial: USB Serial support registered for generic
[    1.835065] usbcore: registered new interface driver option
[    1.835095] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.835194] usbcore: registered new interface driver trancevibrator
[    1.835210] usb20_otg: version 3.10a 21-DEC-2012
[    1.835365] usb20_host: version 3.10a 21-DEC-2012
[    1.839133] usbcore: registered new interface driver xpad
[    1.839182] usbcore: registered new interface driver usb_acecad
[    1.839229] usbcore: registered new interface driver aiptek
[    1.839275] usbcore: registered new interface driver gtco
[    1.839322] usbcore: registered new interface driver hanwang
[    1.839367] usbcore: registered new interface driver kbtab
[    1.839403] Successfully added driver ft5x0x_ts
[    1.839692] .. rk pwm remotectl v1.1 init
[    1.839908] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.840152] remotectl-pwm ff420030.pwm: Missing psci property in the DT.
[    1.840260] sensor_register_slave:mma8452,id=17
[    1.840276] sensor_register_slave:lis3dh,id=7
[    1.840291] sensor_register_slave:mma7660,id=18
[    1.840305] sensor_register_slave:lsm303d,id=22
[    1.840318] sensor_register_slave:gs_mc3230,id=23
[    1.840328] [Gsensor]   gsensor_init
[    1.840341] sensor_register_slave:mpu6880_acc,id=24
[    1.840355] sensor_register_slave:mpu6500_acc,id=25
[    1.840370] sensor_register_slave:lsm330_acc,id=26
[    1.840384] sensor_register_slave:akm8975,id=28
[    1.840398] sensor_register_slave:akm8963,id=29
[    1.840413] sensor_register_slave:l3g4200d,id=43
[    1.840426] sensor_register_slave:l3g20d,id=44
[    1.840440] sensor_register_slave:ewtsa,id=45
[    1.840454] sensor_register_slave:lsm330_gyro,id=48
[    1.840468] sensor_register_slave:cm3217,id=50
[    1.840482] sensor_register_slave:cm3218,id=51
[    1.841063] i2c /dev entries driver
[    1.842161] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.842224] fan53555-reg: supplied by vcc5v0_sys
[    1.844218] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.844267] fan53555-reg: supplied by vcc5v0_sys
[    1.846326] rk808 0-001b: Pmic Chip id: 0x0
[    1.849014] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.849067] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.849145] DCDC_REG1: supplied by vcc3v3_sys
[    1.849815] DCDC_REG2: supplied by vcc3v3_sys
[    1.850295] DCDC_REG3: supplied by vcc3v3_sys
[    1.850489] DCDC_REG4: supplied by vcc3v3_sys
[    1.850864] LDO_REG1: supplied by vcc3v3_sys
[    1.851881] LDO_REG2: supplied by vcc3v3_sys
[    1.852760] LDO_REG3: supplied by vcc3v3_sys
[    1.853645] LDO_REG4: supplied by vcc3v3_sys
[    1.854545] LDO_REG5: supplied by vcc3v3_sys
[    1.855459] LDO_REG6: supplied by vcc3v3_sys
[    1.856349] LDO_REG7: supplied by vcc3v3_sys
[    1.857242] LDO_REG8: supplied by vcc3v3_sys
[    1.858120] SWITCH_REG1: supplied by vcc3v3_sys
[    1.858327] SWITCH_REG2: supplied by vcc3v3_sys
[    1.861594] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.862016] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096fc000
[    1.862152] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[    1.862173] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[    1.862188] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer  on device rockchip-pinctrl
[    1.862205] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[    1.862561] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff80096fe000
[    1.875763] fusb302 4-0022: port 0 probe success
[    1.875899] ft5x0x_ts############################
[    1.875910] ft5x0x_ts_probe-373
[    1.941847] fusb302 4-0022: CC connected in 0 as UFP
[    2.082105] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    2.085764] input: ft5x0x_ts as /devices/virtual/input/input1
[    2.206019] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[    2.206039] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.206054] usb 1-1: Product: USB 2.0 Hub [MTT]
[    2.206673] hub 1-1:1.0: USB hub found
[    2.206765] hub 1-1:1.0: 7 ports detected
[    2.238931] ft5x0x_ts 4-0038: fft5x0x_i2c_Read: i2c read error.
[    2.238946] [FTS]####### Firmware version = 0x8b
[    2.239118] ft5x0x_ts 4-0038: fft5x0x_i2c_Read: i2c read error.
[    2.239131] [FTS]####### report rate is 1390Hz.
[    2.239302] ft5x0x_ts 4-0038: fft5x0x_i2c_Read: i2c read error.
[    2.239317] #######ft5x0x_ts_probe ok !!!!483
[    2.239343] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009742000
[    2.240259] IR NEC protocol handler initialized
[    2.240276] IR RC5(x/sz) protocol handler initialized
[    2.240293] IR RC6 protocol handler initialized
[    2.240309] IR JVC protocol handler initialized
[    2.240325] IR Sony protocol handler initialized
[    2.240341] IR SANYO protocol handler initialized
[    2.240357] IR Sharp protocol handler initialized
[    2.240373] IR MCE Keyboard/mouse protocol handler initialized
[    2.240390] IR XMP protocol handler initialized
[    2.240477] usbcore: registered new interface driver uvcvideo
[    2.240488] USB Video Class driver (1.1.1)
[    2.240508] CamSys driver version: v0.34.5, CamSys head file version: v0.13.0
[    2.244529] __power_supply_register: Expected proper parent device for 'test_ac'
[    2.244656] __power_supply_register: Expected proper parent device for 'test_battery'
[    2.244898] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    2.244999] __power_supply_register: Expected proper parent device for 'test_usb'
[    2.247098] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    2.247647] device-mapper: uevent: version 1.0.3
[    2.247900] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.251356] Bluetooth: HCI UART driver ver 2.3
[    2.251370] Bluetooth: HCI UART protocol H4 registered
[    2.251382] Bluetooth: HCI UART protocol LL registered
[    2.251396] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[    2.251407] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[    2.251419] rtk_btusb: Register usb char device interface for BT driver
[    2.251604] usbcore: registered new interface driver rtk_btusb
[    2.255113] sdhci: Secure Digital Host Controller Interface driver
[    2.255127] sdhci: Copyright(c) Pierre Ossman
[    2.255139] Synopsys Designware Multimedia Card Interface Driver
[    2.255823] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.255909] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.255928] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.255971] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.256002] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.256042] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    2.256053] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    2.256644] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    2.256686] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    2.256703] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    2.256736] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    2.256755] dwmmc_rockchip fe320000.dwmmc: 'cl__bionic_open_tzmad' par: couoperty was nddep arenycat ted.z
[    2.256n 8loo21] dwmmc_rockachip fe3200
.dwmmc: No vmmc regulator found
[    2St.2art5ing recoveroc (pid 183) on Thu n Mayf 24f0770000.sy con:i
d# obmaootimode = emmic
ns: S  0e /mntt/interna30_sd vdfat /dev/block/platform/fe330000.sdhci/by-name/usersl
ot   01 /) mnt=/externa00_sd vflota reqt /dev/blo,k actual 400000
   2div = 0)
[    t2.283 /202d] dwmmc_rockchip foe3rm/20fe003300.000d.sdhcmc/by -name/system ializ0d
[  3  /cache ext4 418/] sdhci-pltfm: SDHCI rm/fe330000.d OF dsdhci/helper
[    2.2
9 4 70] sedhcitadata exte330000b.sdhci: Notvmrm/fmc regulatohcir /byf-namue/metada a  20.284  5 /data  f2fs /arev/block/plat.forhcm/i: feNo 3vqmm30000.sdhci/foy-name/us erdata 61] m0c1:   6S /cust ext4 /roldelerv on /block/platform/fe3300000.sd00.sbdy-nahci] using
  7D /cMA
tom[  ex t4  2 .312d822] hidraw: raworm/fe330000.sdhcri/ (Cby) J-iri Kosina
[   0
   2.38148 /misc cemmc /dev/bleockre/pldatf nm/fee330000.sdhci/ dy-name/misc 0
[
      2.314909] usb/dev/block/platfeorm /fe330000.sdhci2.by-name/uboot 0_i
io: inv_mpu_init:7c6
[   lock/p1lat87fo] armshm/em: fe330000.sdh
                                           i/[ by   -n2.3a18725me/charge0.0
adc   s11upp /ly rvref not foummnc /dd, usoickng atduformmm/fye33 reguladhci/b y-name/resourc2e 0
  12 3] raknandbase mv1c /.dev/1 2016-latfo11-08
[    2s320hci8/by-20] usbcaormete:er  0
  ergis1tered new interfa/dcev/block/platfod-m/fe330000.sdhci2/b.32y4447] u32 class0i
  [ 14   /r 2eco.very e44mc / de   v/Actbions configatfured
[    2.3dh24497] Netfieltervmessag
e  15 /backup emm vc 0.3/d0.
16    2.324548] nform/f_conntrack cive/byr-namse/backup.00 (
ilock /platf933] ctrm/fe330000.sdhrecgistering with nfnet
s: (  C) 2000-2006 Nedev/belock/platforeammk tplatfnorm/fe330000.s
                                           [    2.3316h93ci/rpy-nbame/f: (C) 2
  19 /2 David S. killer
[    2
.3
449I:InternalSD_gROOFR: /mnt/iknt soecket
[ sd  I:2.332826] NET: T: /istmeren t/external_sdamirely a10
[ cmdline4038] mip6: Mobile IPv6
[    2.b33oo406t-6] rip6_ctables:
IC) 2000-2006mentfs floter Core Team
[
c 2.336742] sit=== start void d tmpCmdArggs(invet, r
[    2.337139] NET
Rargev[0g istered proetocrly.famargvily 17
[    _2.337
(v5] NET: Registeied pro2tocosl dcafrd iamily 15
[    2c337197]
emrimc_dpoint is /mdeatic filmtering v
arp/i p/ip6tables h
bstaege is []epreason is [(nuall)e]
your scripts to load br_netfilter if you need this.
[    2.338207] Bridge firewalling registered
[    2.338219] Ebtables v2.0 registered
[    2.338571] Bluetooth: RFCOMM TTY layer initialized
[    2.338589] Bluetooth: RFCOMM socket layer initialized
[    2.338614] Bluetooth: RFCOMM ver 1.11
[    2.338632] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.338642] Bluetooth: BNEP filters: protocol multicast
[    2.338655] Bluetooth: BNEP socket layer initialized
[    2.338667] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.338680] Bluetooth: HIDP socket layer initialized
[    2.338706] l2tp_core: L2TP core driver, V2.0
[    2.338723] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.338775] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.339012] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.339065] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    2.339076] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.339086] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.339135] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 1003, flags = 0.
[    2.339146] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.339157] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.339200] [BT_RFKILL]: Enter rfkill_rk_init
[    2.339458] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 1083.
[    2.339492] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 1009.
[    2.339519] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 1090.
[    2.339545] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 1004.
[    2.339829] [BT_RFKILL]: Request irq for bt wakeup host
[    2.339879] [BT_RFKILL]: ** disable irq
[    2.339992] [BT_RFKILL]: bt_default device registered.
[    2.340300] sensor_register_slave:mpu6880_gyro,id=47
[    2.340728] Registered cp15_barrier emulation handler
[    2.340862] Registered setend emulation handler
[    2.341568] registered taskstats version 1
[    2.342169] rockchip ion idev is NULL
[    2.342183] rga2 ff680000.rga: rga ion client create success!
[    2.342437] rga: Driver loaded successfully ver:3.02
[    2.342567] pvtm list NULL
[    2.347283] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[    2.349675] rockchip-vop ff900000.vop: failed to get vop register byname
[    2.349730] rockchip-vop ff900000.vop: invalid resource
[    2.349744] rockchip-vop ff900000.vop: failed to get vop lut registers
[    2.349757] rockchip-vop ff900000.vop: invalid resource
[    2.349770] rockchip-vop ff900000.vop: failed to get vop cabc lut registers
[    2.350020] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    2.350062] rockchip-vop ff8f0000.vop: failed to get vop register byname
[    2.350090] rockchip-vop ff8f0000.vop: invalid resource
[    2.350103] rockchip-vop ff8f0000.vop: failed to get vop lut registers
[    2.350115] rockchip-vop ff8f0000.vop: invalid resource
[    2.350127] rockchip-vop ff8f0000.vop: failed to get vop cabc lut registers
[    2.350317] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    2.350867] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    2.350967] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    2.351058] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    2.352529] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[    2.353211] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
[    2.353232] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.353245] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[    2.353911] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[    2.356212] mmc1: MAN_BKOPS_EN bit is not set
[    2.368035] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.371901] mmcblk1: mmc1:0001 BJNB4R 29.1 GiB
[    2.375653] mmcblk1boot0: mmc1:0001 BJNB4R partition 1 4.00 MiB
[    2.375996] mmcblk1boot1: mmc1:0001 BJNB4R partition 2 4.00 MiB
[    2.379767] mmcblk1rpmb: mmc1:0001 BJNB4R partition 3 4.00 MiB
[    2.380188]  parameter: 0x000000000 -- 0x000400000 (4 MB)
[    2.380201]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    2.380212]      trust: 0x000800000 -- 0x000c00000 (4 MB)
[    2.380223]       misc: 0x000c00000 -- 0x001000000 (4 MB)
[    2.380233]   resource: 0x001000000 -- 0x002000000 (16 MB)
[    2.380243]     kernel: 0x002000000 -- 0x003800000 (24 MB)
[    2.380252]       boot: 0x003800000 -- 0x005800000 (32 MB)
[    2.380261]   recovery: 0x005800000 -- 0x007800000 (32 MB)
[    2.380271]     backup: 0x007800000 -- 0x00e800000 (112 MB)
[    2.380280]      cache: 0x00e800000 -- 0x016800000 (128 MB)
[    2.380290]     system: 0x016800000 -- 0x0bf400000 (2700 MB)
[    2.380299]   metadata: 0x0bf400000 -- 0x0c0400000 (16 MB)
[    2.380309] baseparamer: 0x0c0400000 -- 0x0c0800000 (4 MB)
[    2.380318]   userdata: 0x0c0800000 -- 0x747800000 (26736 MB)
[    2.380359]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[    2.485473] usb 1-1.1: new low-speed USB device number 3 using ehci-platform
[    2.585527] usb 1-1.1: New USB device found, idVendor=04f3, idProduct=0235
[    2.585557] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.585572] usb 1-1.1: Product: OM
[    2.590533] input: OM as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:04F3:0235.0001/input/input2
[    2.590962] hid-generic 0003:04F3:0235.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-fe3c0000.usb-1.1/input0
[    2.820738] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.835956] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    2.837069] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 284; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    2.837615] mali ff9a0000.gpu: Probed as mali0
[    2.841415] rockchip-typec-phy ff7c0000.phy: ufp = 1, dfp = 0, dp = 0
[    2.841438] rockchip-typec-phy ff7c0000.phy: new_mode = 1
[    2.841452] rockchip-typec-phy ff7c0000.phy: tcphy->mode = 0, new_mode = 1
[    2.843958] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    2.843994] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 3
[    2.844378] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    2.844455] xhci-hcd xhci-hcd.10.auto: irq 232, io mem 0xfe800000
[    2.844714] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.844731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.844747] usb usb3: Product: xHCI Host Controller
[    2.844759] usb usb3: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.844787] usb usb3: SerialNumber: xhci-hcd.10.auto
[    2.845644] hub 3-0:1.0: USB hub found
[    2.845726] hub 3-0:1.0: 1 port detected
[    2.846193] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    2.846217] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 4
[    2.846341] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.846506] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.846555] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.846574] usb usb4: Product: xHCI Host Controller
[    2.846587] usb usb4: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.846600] usb usb4: SerialNumber: xhci-hcd.10.auto
[    2.847415] hub 4-0:1.0: USB hub found
[    2.847458] hub 4-0:1.0: 1 port detected
[    2.848230] xhci-hcd xhci-hcd.10.auto: remove, state 1
[    2.848289] usb usb4: USB disconnect, device number 1
[    2.849002] xhci-hcd xhci-hcd.10.auto: USB bus 4 deregistered
[    2.849037] xhci-hcd xhci-hcd.10.auto: remove, state 1
[    2.849079] usb usb3: USB disconnect, device number 1
[    2.849821] xhci-hcd xhci-hcd.10.auto: USB bus 3 deregistered
[    2.850127] rockchip-dwc3 usb@fe800000: USB peripheral not support!
[    2.854234] rockchip-typec-phy ff800000.phy: mode = 0, id = 0
[    2.854257] rockchip-typec-phy ff800000.phy: new_mode = 2
[    2.854271] rockchip-typec-phy ff800000.phy: tcphy->mode = 0, new_mode = 2
[    2.856886] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    2.856919] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 3
[    2.857286] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    2.857385] xhci-hcd xhci-hcd.11.auto: irq 233, io mem 0xfe900000
[    2.857634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.857652] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.857667] usb usb3: Product: xHCI Host Controller
[    2.857679] usb usb3: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.857726] usb usb3: SerialNumber: xhci-hcd.11.auto
[    2.858497] hub 3-0:1.0: USB hub found
[    2.858540] hub 3-0:1.0: 1 port detected
[    2.859067] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    2.859104] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4
[    2.859222] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.859410] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.859442] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.859470] usb usb4: Product: xHCI Host Controller
[    2.859487] usb usb4: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.859501] usb usb4: SerialNumber: xhci-hcd.11.auto
[    2.860253] hub 4-0:1.0: USB hub found
[    2.860292] hub 4-0:1.0: 1 port detected
[    2.860679] vendor storage:20160801 ret = 0
[    2.864871] ehci-platform fe380000.usb: EHCI Host Controller
[    2.864903] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    2.865188] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    2.872322] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.872554] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.872572] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.872587] usb usb5: Product: EHCI Host Controller
[    2.872600] usb usb5: Manufacturer: Linux 4.4.83 ehci_hcd
[    2.872613] usb usb5: SerialNumber: fe380000.usb
[    2.873289] hub 5-0:1.0: USB hub found
[    2.873331] hub 5-0:1.0: 1 port detected
[    2.874357] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.874390] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    2.874607] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    2.929671] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.929689] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.929704] usb usb6: Product: Generic Platform OHCI controller
[    2.929717] usb usb6: Manufacturer: Linux 4.4.83 ohci_hcd
[    2.929730] usb usb6: SerialNumber: fe3a0000.usb
[    2.930382] hub 6-0:1.0: USB hub found
[    2.930424] hub 6-0:1.0: 1 port detected
[    2.931890] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.932003] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.932024] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.932061] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.932115] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.932177] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    2.932190] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    2.932565] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    2.945528] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.959094] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    2.964182] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[    2.967331] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
[    2.967361] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to add ELD: -16
[    2.968002] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
[    2.968060] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[    2.969977]
[    2.969989] =======================================================
[    2.969999] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    2.970009] =======================================================
[    2.970018] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 2.20.WFD) init.
[    2.970030] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.970040] [WLAN_RFKILL]: wifi turn on power. -1
[    2.970048] RTL871X: module init start
[    2.970056] RTL871X: rtl8188eu v4.3.24_16705.20160509
[    2.970171] usbcore: registered new interface driver rtl8188eu
[    2.970182] RTL871X: module init ret=0
[    2.970197] otg_wakelock_init: No USB transceiver found
[    2.970271] sensor_init: Probe name sensors
[    2.970283] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[    2.970324] dhd_module_init: in Dongle Host Driver, version 1.363.59.144.10 (r)
[    2.970336] ======== dhd_wlan_init_plat_data ========
[    2.970345] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1
[    2.970353] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1
[    2.970363] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    2.970373] dhd_wlan_init_gpio: host_oob_irq: 73
[    2.970382] dhd_wlan_init_gpio: host_oob_irq_flags=0x414
[    2.970390] dhd_wifi_platform_load: Enter
[    2.970410] Power-up adapter 'DHD generic adapter'
[    2.970439] wifi_platform_set_power = 1
[    2.970447] ======== PULL WL_REG_ON(-1) HIGH! ========
[    2.970456] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.970464] [WLAN_RFKILL]: wifi turn on power. -1
[    2.971025] rk808-rtc rk808-rtc: setting system clock to 2018-05-24 07:39:10 UTC (1527147550)
[    2.972363] It doesn't contain Rogue gpu
[    2.991620] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-8fefd62', rk_ko_ver is '5', built at '14:47:26', on 'May 24 2018'.
[    2.991992] Mali: Mali device driver loaded
[    2.993763] input: rk29-keypad as /devices/platform/rockchip-key/input/input3
[    2.994693] ALSA device list:
[    2.994705]   #0: ROCKCHIP,SPDIF
[    2.994714]   #1: rk-hdmi-dp-sound
[    2.995191] Freeing unused kernel memory: 832K
[    2.998998] init: init first stage started!
[    2.999987] init: init second stage started!
[    3.001923] init: Setting ro.rk.soc=rk3399
[    3.001996] init: OK,EMMC DRIVERS INIT OK
[    3.002022] init: property_set("ro.boot.mode", "emmc") failed
[    3.002138] init: property_set("ro.hardware", "rk30board") failed
[    3.002186] init: Running restorecon...
[    3.002281] init: waitpid failed: No child processes
[    3.002779] init: property_set("ro.board.platform", "rk3399") failed
[    3.003083] init: property_set("ro.factory.hasGPS", "false") failed
[    3.003248] init: property_set("ro.boot.noril", "true") failed
[    3.003390] init: property_set("ro.rk.screenshot_enable", "true") failed
[    3.003482] init: (Loading properties from /default.prop took 0.00s.)
[    3.004010] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.004176] init: could not import file '/init.bootmode.emmc.rc' from '/init.rc': No such file or directory
c'   3.004216] init: could not import f    '      erasinge_t.ext: en_US (88 from '/init.r
   No such file or directory
[    3.004241] init  : ( Pars ing /init.rcd_ ttexoot: ken_US (16s6 x 38 @ 1170).004334] init: Starting service 'ueventd'...
[       3.004718]r _teitnit: Starting service 1'heal
thd'...
[    3.005185] init: Waiting for /dev/.coldboot_done...
[    3.005608] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.007223] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.007841] ueventd: ueventd started!
[    3.007980] healthd: BatteryCurrentNowPath not found
[    3.008001] healthd: BatteryCycleCountPath not found
[    3.008459] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.008958] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.009082] ueventd: invalid gid 'trace'
[    3.009393] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.009831] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.010097] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.063663] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.064524] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.065350] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    3.066250] mmc_host mmc2: Bus speed (slot 0) = 200000000Hz (slot req 208000000Hz, actual 200000000HZ div = 0)
[    3.146105] ueventd: Coldboot took 0.14s.
[    3.146426] init: Waiting for /dev/.coldboot_done took 0.14s.
[    3.146534] init: /dev/hw_random not found
[    3.148192] init: /dev/hw_random not found
[    3.149088] file system registered
[    3.150660] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': Permission denied
[    3.150736] init: write_file: Unable to open '/sys/class/android_usb/android0/idVendor': Permission denied
[    3.150804] init: write_file: Unable to open '/sys/class/android_usb/android0/idProduct': Permission denied
[    3.150867] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
[    3.150934] init: write_file: Unable to open '/sys/class/android_usb/android0/functions': Permission denied
[    3.151011] init: write_file: Unable to open '/sys/class/android_usb/android0/iManufacturer': Permission denied
[    3.151083] init: write_file: Unable to open '/sys/class/android_usb/android0/iProduct': Permission denied
[    3.151126] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    3.151151] init: write: cannot expand '${ro.serialno}'
[    3.151577] init: finit_module for "/drmboot.ko" failed: Exec format errorinit: (Loading properties from /system/build.prop took 0.00s.)
[    3.151740] init: (Loading properties from /vendor/build.prop took 0.00s.)
[    3.151788] init: (Loading properties from /factory/factory.prop took 0.00s.)
[    3.151968] fs_mgr: Warning: unknown flag resize
[    3.152175] init: /recovery not specified in fstab
[    3.152977] init: Starting service 'recovery'...
[    3.153624] init: Starting service 'adbd'...
[    3.154357] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': Permission denied
[    3.154455] init: Starting service 'console'...
[    3.155367] init: setsockcreatecon("") failed: Invalid argument
[    3.172488] wifi_platform_bus_enumerate device present 1
[    3.172501] ======== Card detection to detect SDIO card! ========
[    3.172513] mmc2:mmc host rescan start!
[    3.308939] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 253
[    3.312140] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.312182] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    3.329240] bcmsdh_register: register client driver
[    3.329498] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    3.329589] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    3.329603] bus num (host idx)=2, slot num (rca)=1
[    3.329614] found adapter info 'DHD generic adapter'
[    3.329660] sdioh_attach: set sd_f2_blocksize 256
[    3.329992] F1 signature read @0x18000000=0x17224356
[    3.333335] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[    3.333788] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    3.333882] dhd_conf_set_chiprev: chip=0x4354, chiprev=2
[    3.334760] wl_create_event_handler(): thread:wl_event_handler:ba started
[    3.334843] tsk Enter, tsk = 0xffffffc0f0ac1a90
[    3.335079] dhd_attach(): thread:dhd_watchdog_thread:bb started
[    3.335170] dhd_attach(): thread:dhd_dpc:bc started
[    3.335325] dhd_attach(): thread:dhd_rxf:bd started
[    3.335344] dhd_deferred_work_init: work queue initialized
[    3.343500] Dongle Host Driver, version 1.363.59.144.10 (r)
[    3.344255] Register interface [wlan0]  MAC: ac:83:f3:9e:4d:5e
[    3.344255]
[    3.344355] wl_event_handler: was terminated
[    3.344385] wl_destroy_event_handler(): thread:wl_event_handler:ba terminated OK
[    3.344401] dhd_wl_ioctl: re  tur ning    installin0g
                                                        [    3en_.3443453] bcmsdh_oob_intr_unregister: Enter
[    3.344463] bcmsdh_oob_intr_unregister: irq is not registered
[    3.344482] dhd_txglom_enable: enable 0
[    3.344493] dhd_conf_set_txglom_params: swtxglom=0, txglom_exbot=0ot, modetxglmom_bu
parro.dalvik.vm.nativee.b=0, defe"05]- dhd_-wipe_all"x
]alvik.vm.isa,.arus_.variant=cortex-3.53.a1857
d dhald_cvonf_set_txglom_pam.features=defau,lt
daltvik.vm.isah.arm64.variant=cortex-aax=
vik. vm.isa.ar45m629]4 dhd_conf_set_txglou_pa
ms:dalvik.mvm.usejitt==tr0ue
daltvik.vm.heatmpsioze_fi=5x=01
[   
3da445lv40] sdioh_srof.threshold=500
xgldom_modeik. vm.deto cot-Xpms=64m
   d3.344550]. dhvmd_b.us_devreset-Xtmx=512m
N daOFFlDvik.vm.heapmaxf3re44606
widafilvi_pk.latvmfor.m_set_powenfrree= = 0
dal   vi 3.k344617] ========ar PUtsLL iWL_REG_ON(
8] da[WlvLANik_RF.KILLm]: rocktprofilesw=truepodawlviker: 0
[    t3.hr3ead446
lvierda.k .vm.heapgrFKwthli wifmit=192mff
   k.vm.stack-tra4ce-f4751] dhd_madule_init: xExi
dalevik.vm.image-  3de.34x6296] fs_mgr: Wa
3.35lvikn.vm.image-g ex2ozat-Xmx=64m  
    da76lvi9k.vm] fs_mgre Warninhrgeads=2
udanknlvowni fla.g resize
r[ge   t 4.733764] Freeing.drm
dogalvo ikme.vmmo.imragey:dex 2oat660K
[    4
r84o.c5onfi757] fusb302 .-0022: PDt disablled
r  o.c onfig.ringtone=Rings_S (mymcblknth_04.oggmoruno.cteonfdig.a filesystem lert=Alarm_Classa c.ogg
rpts: (null)
[    c5ation_sound=pixi dust.ogg
1p12): mounted firint=Android/rkh33 ordered data mode. OHpts: (null)
514:userdebug/test-keys
pm.dexopt.boot=verify-profile
pm.dexopt.ab-ota=speed-profile
pm.dexopt.install=interpret-only
pm.dexopt.core-app=speed
pm.dexopt.bg-dexopt=speed-profile
pm.dexopt.first-boot=interpret-only
pm.dexopt.shared-apk=speed
pm.dexopt.nsys-library=speed
pm.dexopt.forced-dexopt=speed
ro.rk.soc=rk3399
ro.rk.bt_enable=true
ro.rk.systembar.tabletUI=false
ro.rk.systembar.voiceicon=true
ro.rk.MassStorage=false
ro.rk.hdmi_enable=true
ro.rk.flash_enable=true
ro.rk.homepage_base=http://www.baidu.com
ro.rk.def_brightness=200
ro.rk.screenoff_time=2147483647
ro.rk.screenshot_enable=false
ro.rk.LowBatteryBrightness=true
ro.rk.install_non_market_apps=false
ro.sf.hwrotation=0
ro.sf.lcd_density=240
ro.sf.fakerotation=false
ro.adb.secure=0
ro.com.google.gmsversion=7.1_r3
ro.com.android.dataroaming=true
ro.boot.mode=emmc
ro.boot.noril=false
ro.boot.console=ttyFIQ0
ro.boot.selinux=permissive
ro.boot.baseband=N/A
ro.boot.hardware=rk30board
ro.hwui.path_cache_size=32
ro.hwui.layer_cache_size=48
ro.hwui.texture_cache_size=72
ro.hwui.disable_scissor_opt=true
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=8
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.4
ro.wifi.channels=
ro.allow.mock.location=0
ro.audio.monitorOrientation=true
ro.board.platform=rk3399
ro.build.id=NHG47K
ro.build.date=Thu May 24 15:14:24 CST 2018
ro.build.date.utc=1527146064
ro.build.host=ZIG-HP-Z228
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=zxy
ro.build.flavor=rk3399-userdebug
ro.build.display.id=rk3399-userdebug 7.1.2 NHG47K eng.zxy.20180524.151424 test-keys
ro.build.product=rk3399
ro.build.version.sdk=25
ro.build.version.base_os=
ro.build.version.release=7.1.2
ro.build.version.codename=REL
ro.build.version.incremental=eng.zxy.20180524.151424
ro.build.version.preview_sdk=0
ro.build.version.all_codenames=REL
ro.build.version.security_patch=2017-04-05
ro.build.description=rk3399-userdebug 7.1.2 NHG47K eng.zxy.20180524.151424 test-keys
ro.build.characteristics=tablet
ro.rksdk.version=RK30_ANDROID7.1.2-SDK-v1.00.00
ro.udisk.visible=true
ro.secure=1
ro.target.product=tablet
ro.tether.denied=false
ro.zygote=zygote64_32
ro.carrier=unknown
ro.default.size=100
ro.factory.tool=0
ro.factory.hasGPS=true
ro.factory.hasUMS=false
ro.factory.without_battery=false
ro.factory.storage_suppntfs=true
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.name=rk3399
ro.product.board=rk30sdk
ro.product.brand=Android
ro.product.model=rk3399
ro.product.device=rk3399
ro.product.locale=en-US
ro.product.usbfactory=rockchip_usb
ro.product.manufacturer=rockchip
ro.product.first_api_level=25
ro.baseband=N/A
ro.bootmode=emmc
ro.hardware=rk30board
ro.opengles.version=196610
ro.revision=0
ro.safemode.disabled=true
ro.bootimage.build.date=Thu May 24 15:14:24 CST 2018
ro.bootimage.build.date.utc=1527146064
ro.bootimage.build.fingerprint=Android/rk3399/rk3399:7.1.2/NHG47K/zxy05241514:userdebug/test-keys
ro.bootloader=unknown
ro.debuggable=1
ro.lockscreen.disable.default=true
ro.setupwizard.mode=OPTIONAL
ro.enable_boot_charger_mode=0
sf.power.control=8847360
init.svc.adbd=running
init.svc.console=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
rild.libpath=/system/lib6[    5.6erence-ri]l.sop widpfi.i minterface=wlaity
wifi.supplicant_scan_interval=15
camera2.portability.force_api=1
persist.tegra.nvmmlite=1
persist.enable.3g.dongle=true
testing.mediascanner.skiplist=/mnt/shell/emulated/Android/
keyguard.no_require_sim=true
ExternalSD_ROOT=/mnt/external_sd
InternalSD_ROOT=/mnt/internal_sd
UserVolumeLabel=RockChip
security.perf_harden=1
debug.nfc.se=false
debug.nfc.fw_download=false
debug.atrace.tags.enableflags=0
net.bt.name=Android
net.change=net.bt.name
sys.hwc.device.primary=HDMI-A
sys.hwc.compose_policy=6
sys.usb.controller=fe800000.dwc3
sys.dump.binder_stats.anr=1
sys.dump.binder_stats.uiwdt=1
sys.rkadb.root=0
sys.status.hidebar_enable=false
sys.display.timeline=0
sys.dropbox.max_size_kb=4096
sys.wallpaper.rgb565=0
sys.resolution.changed=false
persist.sys.ui.hw=true
persist.sys.usb.config=mtp,adb
persist.sys.dalvik.vm.lib.2=libart.so
persist.sys.timezone=Asia/Shanghai
persist.sys.strictmode.visual=false
persist.sys.framebuffer.main=1200x825
persist.sys.root_access=1
ro.ril.ecclist=112,911
ril.function.dataonly=1
sys.usb.config=adb
sys.usb.configfs=1

Supported API: 3

-- Wiping data...
Formatting /data...

        F2FS-tools: mkfs.f2fs Ver: 1.7.0 (2016-07-28)

Info: Debug level = 0
Info: Label =
Info: Trim is disabled
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 54755328 (26736 MB)
Info: zone aligned segment0 blkaddr: 512
Info: format vers42ion]  wirth
P "anLindux ovme:r sion 4..4f.283fs zuxy@ZIG-aHized urandom  verd i(o1n6 4.9 201501, 923 (pbrereiltease) (GCop) ) #2 SMP )
REEMPT Thu May 24 14:55:26 CST 2018"
Info: Overprovision ratio = 1.230%
Info: Overprovision segments = 331 (GC reserved = 170)
Info: format successful
Formatting /cache...
Creating filesystem with parameters:
    Size: 134217728
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 8192
    Inode size: 256
    Journal blocks: 1024
    Label:
    Blocks: 32768
    Block groups: 1
    Reserved block group size: 7
Created filesystem with 11/8192 inodes and 1550/32768 blocks
[   11.932311] random: nonblocking pool is initialized
[   13.232205] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: (null)
Data wipe complete.
begin to wipe frp partion!
I:format_volume for: fs_type:emmc blk_device:/dev/block/platform/fe330000.sdhci/by-name/frp mount_point:/frp
E:format_volume: failed to open /dev/block/platform/fe330000.sdhci/by-name/frp
wiping frp failed!
I:Saving locale "en_US"
[   13.296445] fs_mgr: Warning: unknown flag resize
Join led thread error!
Rebooting...
[   13.324430] sysrq: SysRq : Emergency Remount R/O
[   13.325261] EXT4-fs (mmcblk1p12): re-mounted. Opts: (null)
[   13.325319] Emergency Remount complete
[   13.369024] read descriptors
[   13.369074] read descriptors
[   13.369087] read strings
[   13.425311] cpu4 limit freq=816000 min=816000 max=816000
[   13.425515] cpu0 limit freq=816000 min=816000 max=816000
[   13.426420] I : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 294; [Func] : kbase_platform_rk_shutdown(); to make vdd_gpu enabled for turning off pd_gpu in pm_framework.
[   13.458980] rk-vcodec ff660000.rkvdec: vcodec shutdown
[   13.465291] rk-vcodec ff650000.vpu_service: vcodec shutdown
[   13.472047] reboot: Restarting system with command ''
Z籒隈>拖}?駷拖}|?^瀩"XK掆湖嬯?Z敫蔌隍J妺*鷠?}廳7摿dj}燑x?O!b*薣|?躌>}雙碘糐駘p0

U-Boot 2014.10-RK3399-06-02507-g99e11be-dirty (Dec 18 2017 - 12:28:55)

CPU: rk3399
cpu version = 0
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 800000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Board:  Rockchip platform Board
Uboot as second level loader
DRAM:  Found dram banks: 1
Adding bank:0000000000200000(00000000ffe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01000000
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment

GetParam
remotectl v0.1
pwm freq=0xb8320
pwm_freq_nstime=0x52d
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 800000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-12-18#1.09
empty serial no.
reboot normal.
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
failed to find panel driver
read logo on state from dts [1]
no fuel gauge found
can't find dts node for deviceinfo
dw_rk_hdmi_register:fail to read deviceinfo
hdmi baseparamer 0x0@0-0
[EDID-EXTEND] It is a  CEA 861 Series Extension.
no baseparametr,find best edid mode,vic=16
hdmi_dev->video.vic is 4
rk lcdc - 0 dclk set: dclk = 74250000HZ, pll select = 0, div = 1
rockchip_panel_prepare: failed to find panel prepare funcs
hdmi_dev_config_video vic 4 color_output 3 color_output_depth 8
pixel clk is 74250000 tmds clk is 74250000
hsync_pol 1 vsync_pol 1
[HDMI] sucess output HDMI.
PHY PLL not locked: PCLK_ON=1,TMDSCLK_ON=0
rockchip_panel_enable: failed to find panel prepare funcs
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
Hit any key to stop autoboot:  0
load fdt from resouce.
Secure Boot state: 0
kernel   @ 0x00280000 (0x012b2808)
ramdisk  @ 0x05bf0000 (0x001ad6f8)
bootrk: do_bootm_linux...
   Loading Device Tree to 0000000005600000, end 0000000005614a1e ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:0000000009400000, 00000000eec00000
WARNING: could not set reg FDT_ERR_BADOFFSET.

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Initializing cgroup subsys schedtune
[    0.000000] Linux version 4.4.83 (zxy@ZIG-HP-Z228) (gcc version 4.9 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Thu May 24 14:55:26 CST 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] hdmi init vic is -1
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f6ef7000 s45696 r8192 d32128 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 995336
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00546000@0x000B4000(system),0x00008000@0x005FA000(metadata),0x00002000@0x00602000(baseparamer),-@0x00604000(userdata) storagemedia=emmc uboot_logo=0x02000000@0xf5c00000 loader.timestamp=2017-12-18_12:28:55 hdmi.vic=-1 SecureBootCheckOk=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xf6eaf000-0xf6eef000] (0MB) mapped at [ffffffc0f6eaf000-ffffffc0f6eeefff]
[    0.000000] Memory: 3932636K/4044800K available (11582K kernel code, 1354K rwdata, 5316K rodata, 832K init, 1079K bss, 95780K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009110000 - 0xffffff80091e0000   (   832 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008bd0000   ( 11584 KB)
[    0.000000]     .rodata : 0xffffff8008bd0000 - 0xffffff8009110000   (  5376 KB)
[    0.000000]       .data : 0xffffff80091e0000 - 0xffffff8009332808   (  1355 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2000000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2080000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2090000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.009822] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.021104] pid_max: default: 32768 minimum: 301
[    0.026255] Security Framework initialized
[    0.030796] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038163] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.046783] Initializing cgroup subsys freezer
[    0.051678] Initializing cgroup subsys debug
[    0.057206] sched-energy: Sched-energy-costs installed from DT
[    0.063630] CPU0: update cpu_capacity 401
[    0.068083] ASID allocator initialised with 65536 entries
[    0.090893] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.100936] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.124598] Detected VIPT I-cache on CPU1
[    0.124629] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.124665] CPU1: using LPI pending table @0x00000000f2200000
[    0.124707] CPU1: update cpu_capacity 401
[    0.124710] CPU1: Booted secondary processor [410fd034]
[    0.134592] Detected VIPT I-cache on CPU2
[    0.134611] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.134643] CPU2: using LPI pending table @0x00000000f2230000
[    0.134670] CPU2: update cpu_capacity 401
[    0.134673] CPU2: Booted secondary processor [410fd034]
[    0.144631] Detected VIPT I-cache on CPU3
[    0.144650] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.144682] CPU3: using LPI pending table @0x00000000f2270000
[    0.144708] CPU3: update cpu_capacity 401
[    0.144711] CPU3: Booted secondary processor [410fd034]
[    0.154680] Detected PIPT I-cache on CPU4
[    0.154707] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.154746] CPU4: using LPI pending table @0x00000000f22b0000
[    0.154787] CPU4: update cpu_capacity 1024
[    0.154789] CPU4: Booted secondary processor [410fd082]
[    0.164700] Detected PIPT I-cache on CPU5
[    0.164717] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.164753] CPU5: using LPI pending table @0x00000000f22e0000
[    0.164780] CPU5: update cpu_capacity 1024
[    0.164783] CPU5: Booted secondary processor [410fd082]
[    0.164864] Brought up 6 CPUs
[    0.307336] SMP: Total of 6 processors activated.
[    0.312507] CPU features: detected feature: GIC system register CPU interface
[    0.320351] CPU: All CPU(s) started at EL2
[    0.324888] alternatives: patching kernel code
[    0.332286] devtmpfs: initialized
[    0.349130] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.359875] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.367465] pinctrl core: initialized pinctrl subsystem
[    0.374562] Failed to find legacy iommu devices
[    0.379899] NET: Registered protocol family 16
[    0.385176] schedtune: init normalization constants...
[    0.390833] schedtune: CLUSTER[0-3]      min_pwr:    56 max_pwr:   222
[    0.398016] schedtune: CPU[0]            min_pwr:     0 max_pwr:   222
[    0.405197] schedtune: CPU[1]            min_pwr:     0 max_pwr:   222
[    0.412377] schedtune: CPU[2]            min_pwr:     0 max_pwr:   222
[    0.419557] schedtune: CPU[3]            min_pwr:     0 max_pwr:   222
[    0.426738] schedtune: CLUSTER[4-5]      min_pwr:    65 max_pwr:  1108
[    0.433916] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1108
[    0.441095] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1108
[    0.448276] schedtune: SYSTEM            min_pwr:   121 max_pwr:  4434
[    0.455455] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[    0.463881] schedtune: verify normalization constants...
[    0.469725] schedtune: max_pwr/2^0: 4313 => norm_pwr:  1024
[    0.475853] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511
[    0.481979] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
[    0.488107] schedtune: max_pwr/2^3:  539 => norm_pwr:   127
[    0.494235] schedtune: max_pwr/2^4:  269 => norm_pwr:    63
[    0.500361] schedtune: max_pwr/2^5:  134 => norm_pwr:    31
[    0.506488] schedtune: configured to support 5 boost groups
[    0.525982] cpuidle: using governor ladder
[    0.543856] cpuidle: using governor menu
[    0.548207] Registered FIQ tty driver
[    0.552595] vdso: 2 pages (1 code @ ffffff8008bd6000, 1 data @ ffffff80091e4000)
[    0.560757] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.568924] DMA: preallocated 256 KiB pool for atomic allocations
[    0.596436] console [pstore0] enabled
[    0.600653] pstore: Registered ramoops as persistent store backend
[    0.607464] ramoops: attached 0xf0000@0x110000, ecc: 0/0
<hit enter to activate fiq debugger>
[    0.615700] console [ttyFIQ0] enabled
[[    0.615700] console [ttyFIQ0] enabled
[    0.622962] bootconsole [uart0] disabled
    0.622962] bootconsole [uart0] disabled
[    0.634983] Registered fiq debugger ttyFIQ0
[    0.672541] Rockchip hdmi driver version 2.0
.
[    0.674833] iommu: Adding device ff650000.vpu_service to group 0
[    0.674928] iommu: Adding device ff660000.rkvdec to group 1
[    0.674995] iommu: Adding device ff670000.iep to group 2
[    0.675089] iommu: Adding device ff8f0000.vop to group 3
[    0.675167] iommu: Adding device ff900000.vop to group 4
[    0.675261] iommu: Adding device ff910000.isp to group 5
[    0.675340] iommu: Adding device ff920000.isp to group 6
[    0.675995] rk_iommu ff670800.iommu: can't get aclk
[    0.676012] rk_iommu ff670800.iommu: can't get hclk
[    0.676847] SCSI subsystem initialized
[    0.677032] usbcore: registered new interface driver usbfs
[    0.677089] usbcore: registered new interface driver hub
[    0.677194] usbcore: registered new device driver usb
[    0.677551] media: Linux media interface: v0.10
[    0.677590] Linux video capture interface: v2.00
[    0.677722] pps_core: LinuxPPS API ver. 1 registered
[    0.677734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.677762] PTP clock support registered
[    0.682394] Advanced Linux Sound Architecture Driver Initialized.
[    0.682846] Bluetooth: Core ver 2.21
[    0.682876] NET: Registered protocol family 31
[    0.682886] Bluetooth: HCI device and connection manager initialized
[    0.682903] Bluetooth: HCI socket layer initialized
[    0.682919] Bluetooth: L2CAP socket layer initialized
[    0.682945] Bluetooth: SCO socket layer initialized
[    0.685619] rockchip-cpuinfo cpuinfo: Serial         : 0000000000000000
[    0.686124] clocksource: Switched to clocksource arch_sys_counter
[    0.720726] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.720944] NET: Registered protocol family 2
[    0.721349] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.721533] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.721759] TCP: Hash tables configured (established 32768 bind 32768)
[    0.721838] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.721885] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.722061] NET: Registered protocol family 1
[    0.722512] Trying to unpack rootfs image as initramfs...
[    0.809939] Freeing initrd memory: 1716K
[    0.810482] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.810572] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.813313] audit: initializing netlink subsys (disabled)
[    0.813365] audit: type=2000 audit(0.690:1): initialized
[    0.818205] VFS: Disk quotas dquot_6.6.0
[    0.818324] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.819671] fuse init (API version 7.23)
[    0.820272]
[    0.820272] TEE Core Framework initialization (ver 1:0.1)
[    0.820305] TEE armv7 Driver initialization
[    0.820623] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    0.820639] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    0.820789] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    0.824126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.824152] io scheduler noop registered
[    0.824316] io scheduler cfq registered (default)
[    0.825589] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[    0.829731] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.829752] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    0.829770] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.352873] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.353052] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.354515] iep: failed to find iep power down clock source.
[    1.355097] IEP Power ON
[    1.355309] IEP Power OFF
[    1.355410] IEP Driver loaded succesfully
[    1.355605] Module initialized.
[    1.356184] rk-vcodec ff650000.vpu_service: probe device
[    1.356236] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc0f18b6810
[    1.356402] rk-vcodec ff650000.vpu_service: allocator is drm
[    1.356460] rk-vcodec ff650000.vpu_service: checking hw id 0
[    1.356864] rk-vcodec ff650000.vpu_service: init success
[    1.360647] rk-vcodec ff660000.rkvdec: probe device
[    1.360694] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc0f18b7010
[    1.360847] rk-vcodec ff660000.rkvdec: allocator is drm
[    1.360905] rk-vcodec ff660000.rkvdec: checking hw id 6876
[    1.361185] rk-vcodec ff660000.rkvdec: init success
[    1.362542] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.362562] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.363922] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.363941] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.365070] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.366559] console [ttyS0] disabled
[    1.366591] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.367103] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[    1.367616] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.367939] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[    1.372123] mali ff9a0000.gpu: Failed to get regulator
[    1.372140] mali ff9a0000.gpu: Power control initialization failed
[    1.372374] Unable to detect cache hierarchy from DT for CPU 0
[    1.413303] brd: module loaded
[    1.437160] loop: module loaded
[    1.446527] zram: Added device: zram0
[    1.447061] SCSI Media Changer driver v0.25
[    1.447559] rockchip-pinctrl pinctrl: pin gpio1-8 already requested by ff370000.serial; cannot claim for ff1d0000.spi
[    1.447580] rockchip-pinctrl pinctrl: pin-40 (ff1d0000.spi) status -22
[    1.447597] rockchip-pinctrl pinctrl: could not request pin 40 (gpio1-8) from group spi1-tx  on device rockchip-pinctrl
[    1.447614] rockchip-spi ff1d0000.spi: Error applying setting, reverse things back
[    1.447747] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[    1.447762] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    1.449832] tun: Universal TUN/TAP device driver, 1.6
[    1.449844] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.450767] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.450786] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    1.450800] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[    1.450832] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.451004] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.456024] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.456094] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.456105]  Ring mode enabled
[    1.456126]  DMA HW capability register supported
[    1.456136]  Normal descriptors
[    1.456147]  RX Checksum Offload Engine supported (type 2)
[    1.456158]  TX Checksum insertion supported
[    1.456167]  Wake-Up On Lan supported
[    1.456210]  Enable RX Mitigation via HW Watchdog Timer
[    1.523685] libphy: stmmac: probed
[    1.523700] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.523714] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.524414] PPP generic driver version 2.4.2
[    1.524567] PPP BSD Compression module registered
[    1.524584] PPP Deflate Compression module registered
[    1.524616] PPP MPPE Compression module registered
[    1.524639] NET: Registered protocol family 24
[    1.524689] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.524703] CSLIP: code copyright 1989 Regents of the University of California.
[    1.524726] Rockchip WiFi SYS interface (V1.00) ...
[    1.524810] usbcore: registered new interface driver catc
[    1.524856] usbcore: registered new interface driver kaweth
[    1.524874] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.524911] usbcore: registered new interface driver pegasus
[    1.524956] usbcore: registered new interface driver rtl8150
[    1.525000] usbcore: registered new interface driver r8152
[    1.525018] hso: drivers/net/usb/hso.c: Option Wireless
[    1.525079] usbcore: registered new interface driver hso
[    1.525131] usbcore: registered new interface driver asix
[    1.525175] usbcore: registered new interface driver ax88179_178a
[    1.525220] usbcore: registered new interface driver cdc_ether
[    1.525264] usbcore: registered new interface driver cdc_eem
[    1.525311] usbcore: registered new interface driver dm9601
[    1.525365] usbcore: registered new interface driver smsc75xx
[    1.525419] usbcore: registered new interface driver smsc95xx
[    1.525462] usbcore: registered new interface driver gl620a
[    1.525506] usbcore: registered new interface driver net1080
[    1.525552] usbcore: registered new interface driver plusb
[    1.525597] usbcore: registered new interface driver rndis_host
[    1.525642] usbcore: registered new interface driver cdc_subset
[    1.525686] usbcore: registered new interface driver zaurus
[    1.525733] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.525796] usbcore: registered new interface driver int51x1
[    1.525841] usbcore: registered new interface driver kalmia
[    1.525885] usbcore: registered new interface driver ipheth
[    1.525932] usbcore: registered new interface driver sierra_net
[    1.525977] usbcore: registered new interface driver cx82310_eth
[    1.526034] usbcore: registered new interface driver cdc_ncm
[    1.526078] usbcore: registered new interface driver qmi_wwan
[    1.526154] usbcore: registered new interface driver cdc_mbim
[    1.527289] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[    1.530268] rockchip-typec-phy ff800000.phy: mode = 0, id = 0
[    1.530286] rockchip-typec-phy ff800000.phy: new_mode = 2
[    1.530300] rockchip-typec-phy ff800000.phy: tcphy->mode = 0, new_mode = 2
[    1.532649] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    1.533252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.533273] ehci-pci: EHCI PCI platform driver
[    1.533331] ehci-platform: EHCI generic platform driver
[    1.537127] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.537157] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.537301] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    1.546144] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.546280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.546297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.546311] usb usb1: Product: EHCI Host Controller
[    1.546324] usb usb1: Manufacturer: Linux 4.4.83 ehci_hcd
[    1.546335] usb usb1: SerialNumber: fe3c0000.usb
[    1.546769] hub 1-0:1.0: USB hub found
[    1.546802] hub 1-0:1.0: 1 port detected
[    1.547276] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.547307] ohci-platform: OHCI generic platform driver
[    1.547751] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.547782] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.547889] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    1.603606] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.603623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.603638] usb usb2: Product: Generic Platform OHCI controller
[    1.603651] usb usb2: Manufacturer: Linux 4.4.83 ohci_hcd
[    1.603663] usb usb2: SerialNumber: fe3e0000.usb
[    1.604062] hub 2-0:1.0: USB hub found
[    1.604096] hub 2-0:1.0: 1 port detected
[    1.604855] usbcore: registered new interface driver cdc_acm
[    1.604869] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.604931] usbcore: registered new interface driver usblp
[    1.604977] usbcore: registered new interface driver cdc_wdm
[    1.605021] usbcore: registered new interface driver uas
[    1.605092] usbcore: registered new interface driver usb-storage
[    1.605133] usbcore: registered new interface driver ums-alauda
[    1.605174] usbcore: registered new interface driver ums-cypress
[    1.605214] usbcore: registered new interface driver ums-datafab
[    1.605254] usbcore: registered new interface driver ums_eneub6250
[    1.605295] usbcore: registered new interface driver ums-freecom
[    1.605335] usbcore: registered new interface driver ums-isd200
[    1.605375] usbcore: registered new interface driver ums-jumpshot
[    1.605413] usbcore: registered new interface driver ums-karma
[    1.605456] usbcore: registered new interface driver ums-onetouch
[    1.605497] usbcore: registered new interface driver ums-sddr09
[    1.605537] usbcore: registered new interface driver ums-sddr55
[    1.605576] usbcore: registered new interface driver ums-usbat
[    1.605656] usbcore: registered new interface driver usbserial
[    1.605695] usbcore: registered new interface driver usbserial_generic
[    1.605726] usbserial: USB Serial support registered for generic
[    1.605772] usbcore: registered new interface driver option
[    1.605802] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.605898] usbcore: registered new interface driver trancevibrator
[    1.605914] usb20_otg: version 3.10a 21-DEC-2012
[    1.606069] usb20_host: version 3.10a 21-DEC-2012
[    1.609846] usbcore: registered new interface driver xpad
[    1.609895] usbcore: registered new interface driver usb_acecad
[    1.609941] usbcore: registered new interface driver aiptek
[    1.609986] usbcore: registered new interface driver gtco
[    1.610031] usbcore: registered new interface driver hanwang
[    1.610077] usbcore: registered new interface driver kbtab
[    1.610113] Successfully added driver ft5x0x_ts
[    1.610393] .. rk pwm remotectl v1.1 init
[    1.610611] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.610859] remotectl-pwm ff420030.pwm: Missing psci property in the DT.
[    1.610967] sensor_register_slave:mma8452,id=17
[    1.610983] sensor_register_slave:lis3dh,id=7
[    1.610997] sensor_register_slave:mma7660,id=18
[    1.611011] sensor_register_slave:lsm303d,id=22
[    1.611025] sensor_register_slave:gs_mc3230,id=23
[    1.611035] [Gsensor]   gsensor_init
[    1.611048] sensor_register_slave:mpu6880_acc,id=24
[    1.611063] sensor_register_slave:mpu6500_acc,id=25
[    1.611077] sensor_register_slave:lsm330_acc,id=26
[    1.611092] sensor_register_slave:akm8975,id=28
[    1.611105] sensor_register_slave:akm8963,id=29
[    1.611120] sensor_register_slave:l3g4200d,id=43
[    1.611133] sensor_register_slave:l3g20d,id=44
[    1.611147] sensor_register_slave:ewtsa,id=45
[    1.611161] sensor_register_slave:lsm330_gyro,id=48
[    1.611175] sensor_register_slave:cm3217,id=50
[    1.611189] sensor_register_slave:cm3218,id=51
[    1.611788] i2c /dev entries driver
[    1.612875] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.612936] fan53555-reg: supplied by vcc5v0_sys
[    1.614928] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.614977] fan53555-reg: supplied by vcc5v0_sys
[    1.617036] rk808 0-001b: Pmic Chip id: 0x0
[    1.619697] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.619750] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.619831] DCDC_REG1: supplied by vcc3v3_sys
[    1.620485] DCDC_REG2: supplied by vcc3v3_sys
[    1.620977] DCDC_REG3: supplied by vcc3v3_sys
[    1.621180] DCDC_REG4: supplied by vcc3v3_sys
[    1.621541] LDO_REG1: supplied by vcc3v3_sys
[    1.622582] LDO_REG2: supplied by vcc3v3_sys
[    1.623460] LDO_REG3: supplied by vcc3v3_sys
[    1.624341] LDO_REG4: supplied by vcc3v3_sys
[    1.625234] LDO_REG5: supplied by vcc3v3_sys
[    1.626109] LDO_REG6: supplied by vcc3v3_sys
[    1.627019] LDO_REG7: supplied by vcc3v3_sys
[    1.627902] LDO_REG8: supplied by vcc3v3_sys
[    1.628797] SWITCH_REG1: supplied by vcc3v3_sys
[    1.629002] SWITCH_REG2: supplied by vcc3v3_sys
[    1.632214] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.632630] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096fc000
[    1.632732] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[    1.632751] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[    1.632766] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer  on device rockchip-pinctrl
[    1.632822] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[    1.633183] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff80096fe000
[    1.646374] fusb302 4-0022: port 0 probe success
[    1.646510] ft5x0x_ts############################
[    1.646522] ft5x0x_ts_probe-373
[    1.712510] fusb302 4-0022: CC connected in 0 as UFP
[    1.852812] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.856589] input: ft5x0x_ts as /devices/virtual/input/input1
[    1.976726] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[    1.976745] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.976761] usb 1-1: Product: USB 2.0 Hub [MTT]
[    1.977216] hub 1-1:1.0: USB hub found
[    1.977349] hub 1-1:1.0: 7 ports detected
[    2.009643] ft5x0x_ts 4-0038: fft5x0x_i2c_Read: i2c read error.
[    2.009658] [FTS]####### Firmware version = 0x8b
[    2.009830] ft5x0x_ts 4-0038: fft5x0x_i2c_Read: i2c read error.
[    2.009843] [FTS]####### report rate is 1390Hz.
[    2.010014] ft5x0x_ts 4-0038: fft5x0x_i2c_Read: i2c read error.
[    2.010029] #######ft5x0x_ts_probe ok !!!!483
[    2.010056] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009742000
[    2.010963] IR NEC protocol handler initialized
[    2.010980] IR RC5(x/sz) protocol handler initialized
[    2.010997] IR RC6 protocol handler initialized
[    2.011013] IR JVC protocol handler initialized
[    2.011029] IR Sony protocol handler initialized
[    2.011045] IR SANYO protocol handler initialized
[    2.011061] IR Sharp protocol handler initialized
[    2.011077] IR MCE Keyboard/mouse protocol handler initialized
[    2.011094] IR XMP protocol handler initialized
[    2.011178] usbcore: registered new interface driver uvcvideo
[    2.011189] USB Video Class driver (1.1.1)
[    2.011208] CamSys driver version: v0.34.5, CamSys head file version: v0.13.0
[    2.015228] __power_supply_register: Expected proper parent device for 'test_ac'
[    2.015353] __power_supply_register: Expected proper parent device for 'test_battery'
[    2.015587] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    2.015688] __power_supply_register: Expected proper parent device for 'test_usb'
[    2.017781] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    2.018343] device-mapper: uevent: version 1.0.3
[    2.018606] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.022086] Bluetooth: HCI UART driver ver 2.3
[    2.022101] Bluetooth: HCI UART protocol H4 registered
[    2.022112] Bluetooth: HCI UART protocol LL registered
[    2.022126] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[    2.022137] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[    2.022149] rtk_btusb: Register usb char device interface for BT driver
[    2.022394] usbcore: registered new interface driver rtk_btusb
[    2.025439] sdhci: Secure Digital Host Controller Interface driver
[    2.025453] sdhci: Copyright(c) Pierre Ossman
[    2.025464] Synopsys Designware Multimedia Card Interface Driver
[    2.026105] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.026238] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.026257] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.026297] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.026329] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.026370] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    2.026380] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    2.026977] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    2.027015] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    2.027032] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    2.027065] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    2.027084] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.027161] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    2.027356] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    2.027371] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    2.039567] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.053912] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    2.054119] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.055676] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    2.055688] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    2.082867] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    2.083539] hidraw: raw HID events driver (C) Jiri Kosina
[    2.085530] usbcore: registered new interface driver usbhid
[    2.085541] usbhid: USB HID core driver
[    2.085648] inv_mpu_iio: inv_mpu_init:746
[    2.087064] ashmem: initialized
[    2.089280] ff100000.saradc supply vref not found, using dummy regulator
[    2.096685] rknandbase v1.1 2016-11-08
[    2.097125] usbcore: registered new interface driver snd-usb-audio
[    2.101793] u32 classifier
[    2.101806]     Actions configured
[    2.101843] Netfilter messages via NETLINK v0.30.
[    2.101897] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.102213] ctnetlink v0.93: registering with nfnetlink.
[    2.102872] xt_time: kernel timezone is -0000
[    2.104470] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.104730] arp_tables: (C) 2002 David S. Miller
[    2.105165] Initializing XFRM netlink socket
[    2.105540] NET: Registered protocol family 10
[    2.106284] mip6: Mobile IPv6
[    2.106310] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.108206] sit: IPv6 over IPv4 tunneling driver
[    2.108590] NET: Registered protocol family 17
[    2.108614] NET: Registered protocol family 15
[    2.108646] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.109311] Bridge firewalling registered
[    2.109324] Ebtables v2.0 registered
[    2.109522] Bluetooth: RFCOMM TTY layer initialized
[    2.109540] Bluetooth: RFCOMM socket layer initialized
[    2.109563] Bluetooth: RFCOMM ver 1.11
[    2.109582] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.109591] Bluetooth: BNEP filters: protocol multicast
[    2.109604] Bluetooth: BNEP socket layer initialized
[    2.109617] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.109629] Bluetooth: HIDP socket layer initialized
[    2.109667] l2tp_core: L2TP core driver, V2.0
[    2.109685] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.109698] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.109931] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.109982] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    2.109993] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.110003] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.110054] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 1003, flags = 0.
[    2.110065] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.110076] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.110120] [BT_RFKILL]: Enter rfkill_rk_init
[    2.110384] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 1083.
[    2.110419] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 1009.
[    2.110446] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 1090.
[    2.110472] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 1004.
[    2.110693] [BT_RFKILL]: Request irq for bt wakeup host
[    2.110739] [BT_RFKILL]: ** disable irq
[    2.110845] [BT_RFKILL]: bt_default device registered.
[    2.111045] sensor_register_slave:mpu6880_gyro,id=47
[    2.111434] Registered cp15_barrier emulation handler
[    2.111528] Registered setend emulation handler
[    2.112111] registered taskstats version 1
[    2.112635] rockchip ion idev is NULL
[    2.112648] rga2 ff680000.rga: rga ion client create success!
[    2.112883] rga: Driver loaded successfully ver:3.02
[    2.113010] pvtm list NULL
[    2.113695] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[    2.114957] rockchip-vop ff900000.vop: failed to get vop register byname
[    2.114991] rockchip-vop ff900000.vop: invalid resource
[    2.115002] rockchip-vop ff900000.vop: failed to get vop lut registers
[    2.115013] rockchip-vop ff900000.vop: invalid resource
[    2.115022] rockchip-vop ff900000.vop: failed to get vop cabc lut registers
[    2.115179] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    2.115204] rockchip-vop ff8f0000.vop: failed to get vop register byname
[    2.115227] rockchip-vop ff8f0000.vop: invalid resource
[    2.115237] rockchip-vop ff8f0000.vop: failed to get vop lut registers
[    2.115247] rockchip-vop ff8f0000.vop: invalid resource
[    2.115256] rockchip-vop ff8f0000.vop: failed to get vop cabc lut registers
[    2.115373] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    2.115755] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    2.115780] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    2.115840] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    2.120295] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[    2.120713] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
[    2.120729] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.120741] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[    2.121128] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[    2.128625] mmc1: MAN_BKOPS_EN bit is not set
[    2.141335] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.145227] mmcblk1: mmc1:0001 BJNB4R 29.1 GiB
[    2.145432] mmcblk1boot0: mmc1:0001 BJNB4R partition 1 4.00 MiB
[    2.148993] mmcblk1boot1: mmc1:0001 BJNB4R partition 2 4.00 MiB
[    2.149298] mmcblk1rpmb: mmc1:0001 BJNB4R partition 3 4.00 MiB
[    2.149779]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    2.149794]      trust: 0x000800000 -- 0x000c00000 (4 MB)
[    2.149805]       misc: 0x000c00000 -- 0x001000000 (4 MB)
[    2.149815]   resource: 0x001000000 -- 0x002000000 (16 MB)
[    2.149825]     kernel: 0x002000000 -- 0x003800000 (24 MB)
[    2.149835]       boot: 0x003800000 -- 0x005800000 (32 MB)
[    2.149844]   recovery: 0x005800000 -- 0x007800000 (32 MB)
[    2.149854]     backup: 0x007800000 -- 0x00e800000 (112 MB)
[    2.149864]      cache: 0x00e800000 -- 0x016800000 (128 MB)
[    2.149873]     system: 0x016800000 -- 0x0bf400000 (2700 MB)
[    2.149883]   metadata: 0x0bf400000 -- 0x0c0400000 (16 MB)
[    2.149892] baseparamer: 0x0c0400000 -- 0x0c0800000 (4 MB)
[    2.149902]   userdata: 0x0c0800000 -- 0x747800000 (26736 MB)
[    2.149941]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
[    2.259477] usb 1-1.1: new low-speed USB device number 3 using ehci-platform
[    2.360152] usb 1-1.1: New USB device found, idVendor=04f3, idProduct=0235
[    2.360171] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.360184] usb 1-1.1: Product: OM
[    2.363872] input: OM as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:04F3:0235.0001/input/input2
[    2.364332] hid-generic 0003:04F3:0235.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-fe3c0000.usb-1.1/input0
[    2.583241] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.601598] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    2.602684] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 284; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    2.606896] mali ff9a0000.gpu: Probed as mali0
[    2.610669] rockchip-typec-phy ff7c0000.phy: ufp = 1, dfp = 0, dp = 0
[    2.610695] rockchip-typec-phy ff7c0000.phy: new_mode = 1
[    2.610709] rockchip-typec-phy ff7c0000.phy: tcphy->mode = 0, new_mode = 1
[    2.615065] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    2.615131] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 3
[    2.615501] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    2.615593] xhci-hcd xhci-hcd.10.auto: irq 232, io mem 0xfe800000
[    2.615819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.615836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.615872] usb usb3: Product: xHCI Host Controller
[    2.615889] usb usb3: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.615901] usb usb3: SerialNumber: xhci-hcd.10.auto
[    2.616774] hub 3-0:1.0: USB hub found
[    2.616834] hub 3-0:1.0: 1 port detected
[    2.617299] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    2.617324] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 4
[    2.617422] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.617606] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.617628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.617642] usb usb4: Product: xHCI Host Controller
[    2.617655] usb usb4: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.617667] usb usb4: SerialNumber: xhci-hcd.10.auto
[    2.618418] hub 4-0:1.0: USB hub found
[    2.618478] hub 4-0:1.0: 1 port detected
[    2.619182] xhci-hcd xhci-hcd.10.auto: remove, state 1
[    2.619230] usb usb4: USB disconnect, device number 1
[    2.620067] xhci-hcd xhci-hcd.10.auto: USB bus 4 deregistered
[    2.620091] xhci-hcd xhci-hcd.10.auto: remove, state 1
[    2.620113] usb usb3: USB disconnect, device number 1
[    2.620868] xhci-hcd xhci-hcd.10.auto: USB bus 3 deregistered
[    2.621246] rockchip-dwc3 usb@fe800000: USB peripheral not support!
[    2.625369] rockchip-typec-phy ff800000.phy: mode = 0, id = 0
[    2.625390] rockchip-typec-phy ff800000.phy: new_mode = 2
[    2.625405] rockchip-typec-phy ff800000.phy: tcphy->mode = 0, new_mode = 2
[    2.627859] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    2.627909] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 3
[    2.628278] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    2.628344] xhci-hcd xhci-hcd.11.auto: irq 233, io mem 0xfe900000
[    2.628626] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.628658] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.628676] usb usb3: Product: xHCI Host Controller
[    2.628689] usb usb3: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.628703] usb usb3: SerialNumber: xhci-hcd.11.auto
[    2.629616] hub 3-0:1.0: USB hub found
[    2.629696] hub 3-0:1.0: 1 port detected
[    2.630194] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[    2.630223] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4
[    2.630341] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.630522] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.630555] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.630574] usb usb4: Product: xHCI Host Controller
[    2.630587] usb usb4: Manufacturer: Linux 4.4.83 xhci-hcd
[    2.630599] usb usb4: SerialNumber: xhci-hcd.11.auto
[    2.631415] hub 4-0:1.0: USB hub found
[    2.631459] hub 4-0:1.0: 1 port detected
[    2.632313] vendor storage:20160801 ret = 0
[    2.636166] ehci-platform fe380000.usb: EHCI Host Controller
[    2.636200] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    2.636488] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    2.646166] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.646346] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.646363] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.646378] usb usb5: Product: EHCI Host Controller
[    2.646391] usb usb5: Manufacturer: Linux 4.4.83 ehci_hcd
[    2.646404] usb usb5: SerialNumber: fe380000.usb
[    2.647013] hub 5-0:1.0: USB hub found
[    2.647056] hub 5-0:1.0: 1 port detected
[    2.647977] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.648008] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    2.648184] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    2.703713] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.703732] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.703747] usb usb6: Product: Generic Platform OHCI controller
[    2.703761] usb usb6: Manufacturer: Linux 4.4.83 ohci_hcd
[    2.703774] usb usb6: SerialNumber: fe3a0000.usb
[    2.704781] hub 6-0:1.0: USB hub found
[    2.704836] hub 6-0:1.0: 1 port detected
[    2.706455] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    2.706568] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    2.706589] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    2.706629] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    2.706657] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    2.706717] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    2.706731] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    2.707103] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    2.719639] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.733029] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    2.738119] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[    2.741754] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
[    2.741783] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to add ELD: -16
[    2.742435] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
[    2.742530] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[    2.744302]
[    2.744313] =======================================================
[    2.744322] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    2.744332] =======================================================
[    2.744341] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 2.20.WFD) init.
[    2.744353] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.744363] [WLAN_RFKILL]: wifi turn on power. -1
[    2.744371] RTL871X: module init start
[    2.744379] RTL871X: rtl8188eu v4.3.24_16705.20160509
[    2.744486] usbcore: registered new interface driver rtl8188eu
[    2.744496] RTL871X: module init ret=0
[    2.744512] otg_wakelock_init: No USB transceiver found
[    2.744586] sensor_init: Probe name sensors
[    2.744597] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[    2.744637] dhd_module_init: in Dongle Host Driver, version 1.363.59.144.10 (r)
[    2.744648] ======== dhd_wlan_init_plat_data ========
[    2.744658] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1
[    2.744666] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1
[    2.744675] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    2.744686] dhd_wlan_init_gpio: host_oob_irq: 73
[    2.744694] dhd_wlan_init_gpio: host_oob_irq_flags=0x414
[    2.744702] dhd_wifi_platform_load: Enter
[    2.744723] Power-up adapter 'DHD generic adapter'
[    2.744772] wifi_platform_set_power = 1
[    2.744781] ======== PULL WL_REG_ON(-1) HIGH! ========
[    2.744790] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    2.744798] [WLAN_RFKILL]: wifi turn on power. -1
[    2.745398] rk808-rtc rk808-rtc: setting system clock to 2018-05-24 07:39:25 UTC (1527147565)
[    2.745986] It doesn't contain Rogue gpu
[    2.756844] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-8fefd62', rk_ko_ver is '5', built at '14:47:26', on 'May 24 2018'.
[    2.757037] Mali: Mali device driver loaded
[    2.757428] input: rk29-keypad as /devices/platform/rockchip-key/input/input3
[    2.758057] ALSA device list:
[    2.758067]   #0: ROCKCHIP,SPDIF
[    2.758075]   #1: rk-hdmi-dp-sound
[    2.758555] Freeing unused kernel memory: 832K
[    2.762330] init: init first stage started!
[    2.763348] init: init second stage started!
[    2.765285] init: Setting ro.rk.soc=rk3399
[    2.765358] init: OK,EMMC DRIVERS INIT OK
[    2.765383] init: property_set("ro.boot.mode", "emmc") failed
[    2.765445] init: property_set("ro.hardware", "rk30board") failed
[    2.765493] init: Running restorecon...
[    2.765587] init: waitpid failed: No child processes
[    2.765861] init: (Loading properties from /default.prop took 0.00s.)
[    2.767279] init: /init.rc: 592: invalid keyword 'echo'
[    2.767651] init: (Parsing /init.environ.rc took 0.00s.)
[    2.768022] init: (Parsing /init.usb.rc took 0.00s.)
[    2.768796] init: (Parsing init.rk30board.bootmode.emmc.rc took 0.00s.)
[    2.769490] init: (Parsing init.rk30board.usb.rc took 0.00s.)
[    2.769546] init: (Parsing init.rk30board.environment.rc took 0.00s.)
[    2.769623] init: could not import file '/init.stt_trace.rc' from '/init.debug.rc': No such file or directory
[    2.769660] init: could not import file '/init.logs.rc' from '/init.debug.rc': No such file or directory
[    2.769694] init: could not import file '/init.crashlogd.rc' from '/init.debug.rc': No such file or directory
[    2.769729] init: could not import file '/init.coredump.rc' from '/init.debug.rc': No such file or directory
[    2.769766] init: could not import file '/init.log-watch.rc' from '/init.debug.rc': No such file or directory
[    2.769828] init: (Parsing /init.kernel.rc took 0.00s.)
[    2.769931] init: (Parsing /init.debug-charging.rc took 0.00s.)
[    2.769951] init: (Parsing /init.debug.rc took 0.00s.)
[    2.769968] init: (Parsing init.rockchip.rc took 0.00s.)
[    2.770353] init: (Parsing init.connectivity.rc took 0.00s.)
[    2.770390] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc': No such file or directory
[    2.770493] init: (Parsing init.rk3399.rc took 0.00s.)
[    2.770610] init: ignored duplicate definition of service 'serio'init: (Parsing init.tablet.rc took 0.00s.)
[    2.770663] init: could not import file 'init.car.rc' from '/init.rk30board.rc': No such file or directory
[    2.770697] init: could not import file 'init.optee.rc' from '/init.rk30board.rc': No such file or directory
[    2.770718] init: (Parsing /init.rk30board.rc took 0.00s.)
[    2.771324] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    2.771422] init: (Parsing /init.zygote64_32.rc took 0.00s.)
[    2.771441] init: (Parsing /init.rc took 0.01s.)
[    2.771692] init: Starting service 'ueventd'...
[    2.774609] ueventd: ueventd started!
[    2.774797] init: write_file: Unable to open '/proc/sys/kernel/panic_on_stackoverflow': No such file or directory
[    2.774835] init: Waiting for /dev/.coldboot_done...
[    2.775688] ueventd: invalid gid 'trace'
[    2.777407] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.778988] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.780568] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.783400] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.839044] mmc_host mmc2: Bus speed (slot 0) = 200000000Hz (slot req 208000000Hz, actual 200000000HZ div = 0)
[    2.903719] ueventd: Coldboot took 0.13s.
[    2.907028] init: Waiting for /dev/.coldboot_done took 0.13s.
[    2.907166] init: /dev/hw_random not found
[    2.908163] keychord: using input dev ff420030.pwm for fevent
[    2.908201] keychord: using input dev rk29-keypad for fevent
[    2.912557] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[    2.922363] Registered swp emulation handler
[    2.922622] init: write_file: Unable to open '/sys/module/rockchip_pm/parameters/policy': No such file or directory
[    2.923647] fs_mgr: Warning: unknown flag resize
[    2.923830] init: /dev/hw_random not found
[    2.924008] init: write_file: Unable to open '/sys/block/mmcblk0/bdi/read_ahead_kb': No such file or directory
[    2.924804] fs_mgr: Warning: unknown flag resize
[    2.929253] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    2.929316] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/system,target=/system,type=ext4)=0
[    2.930600] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/cache,/cache,ext4)=-1: No such file or directory
[    2.931352] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/cache
[    2.938470] random: e2fsck: uninitialized urandom read (40 bytes read, 41 bits of entropy available)
[    2.939602] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 250
[    2.943185] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.943229] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    2.946140] wifi_platform_bus_enumerate device present 1
[    2.946155] ======== Card detection to detect SDIO card! ========
[    2.946166] mmc2:mmc host rescan start!
[    2.962268] bcmsdh_register: register client driver
[    2.962426] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    2.962550] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    2.962561] bus num (host idx)=2, slot num (rca)=1
[    2.962571] found adapter info 'DHD generic adapter'
[    2.962642] sdioh_attach: set sd_f2_blocksize 256
[    2.963187] F1 signature read @0x18000000=0x17224356
[    2.968664] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[    2.969511] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    2.969618] dhd_conf_set_chiprev: chip=0x4354, chiprev=2
[    2.970614] wl_create_event_handler(): thread:wl_event_handler:b8 started
[    2.970874] tsk Enter, tsk = 0xffffffc0f0a81a90
[    2.970897] dhd_attach(): thread:dhd_watchdog_thread:b9 started
[    2.970972] dhd_attach(): thread:dhd_dpc:ba started
[    2.971039] dhd_attach(): thread:dhd_rxf:bb started
[    2.971054] dhd_deferred_work_init: work queue initialized
[    2.981471] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    2.981471]
[    2.981510] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: clean, 38/8192 files, 1753/32768 blocks
[    2.981510]
[    2.986402] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.986516] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/cache,target=/cache,type=ext4)=0
[    2.987664] EXT4-fs (mmcblk1p11): Ignoring removed nomblk_io_submit option
[    2.988939] Dongle Host Driver, version 1.363.59.144.10 (r)
[    2.989108] EXT4-fs (mmcblk1p11): warning: maximal mount count reached, running e2fsck is recommended
[    2.989703] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    2.989777] Register interface [wlan0]  MAC: ac:83:f3:9e:4d:5e
[    2.989777]
[    2.989786] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/metadata,/metadata,ext4)=0: Success
[    2.989822] wl_event_handler: was terminated
[    2.989860] wl_destroy_event_handler(): thread:wl_event_handler:b8 terminated OK
[    2.989879] dhd_wl_ioctl: returning as busstate=0
[    2.989945] bcmsdh_oob_intr_unregister: Enter
[    2.989956] bcmsdh_oob_intr_unregister: irq is not registered
[    2.989976] dhd_txglom_enable: enable 0
[    2.989988] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0, txglom_bucket_size=0
[    2.990000] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1
[    2.990013] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
[    2.990024] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=0
[    2.990035] sdioh_set_mode: set txglom_mode to copy
[    2.990044] dhd_bus_devreset:  WLAN OFF DONE
[    2.990108] wifi_platform_set_power = 0
[    2.990119] ======== PULL WL_REG_ON(-1) LOW! ========
[    2.990129] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    2.990153] [WLAN_RFKILL]: wifi shut off power.
[    2.990245] dhd_module_init: Exit err=0
[    3.014637] fs_mgr: check_fs(): unmount(/metadata) succeeded
[    3.014696] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/metadata
[    3.016181] random: e2fsck: uninitialized urandom read (40 bytes read, 58 bits of entropy available)
[    3.032429] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    3.032429]
[    3.032483] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata has been mounted 11 times without being checked, check forced.
[    3.032483]
[    3.032510] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    3.032510]
[    3.032532] e2fsck: Pass 2: Checking directory structure
[    3.032532]
[    3.032554] e2fsck: Pass 3: Checking directory connectivity
[    3.032554]
[    3.032576] e2fsck: Pass 4: Checking reference counts
[    3.032576]
[    3.032598] e2fsck: Pass 5: Checking group summary information
[    3.032598]
[    3.032620] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata: 11/1024 files (0.0% non-contiguous), 1102/4096 blocks
[    3.032620]
[    3.035306] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.035380] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/metadata,target=/metadata,type=ext4)=0
[    3.035470] fs_mgr: Running /system/bin/fsck.f2fs -a /dev/block/platform/fe330000.sdhci/by-name/userdata
[    3.037467] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
[    3.037467]
[    3.037528] fsck.f2fs: fsck.f2fs terminated by exit(255)
[    3.037528]
[    3.079722] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/userdata,target=/data,type=f2fs)=0
[    3.083592] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
[    3.083955] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
[    3.084248] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
[    3.084640] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
[    3.084937] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
[    3.085195] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
[    3.085450] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
[    3.085722] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
[    3.086180] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
[    3.086449] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
[    3.086753] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
[    3.087012] init: (Parsing /system/etc/init/inputflinger.rc took 0.00s.)
[    3.087277] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
[    3.087557] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
[    3.087858] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
[    3.088457] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
[    3.088787] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
[    3.089077] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
[    3.089363] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
[    3.089648] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
[    3.089932] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
[    3.090223] init: ignored duplicate definition of service 'media'init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
[    3.090527] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
[    3.090861] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
[    3.091144] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
[    3.091417] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
[    3.091704] init: ignored duplicate definition of service 'ril-daemon'init: (Parsing /system/etc/init/rild.rc took 0.00s.)
[    3.092048] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
[    3.092327] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
[    3.092645] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
[    3.092957] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
[    3.093284] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
[    3.094319] init: property_set("ro.board.platform", "rk3399") failed
[    3.094796] init: property_set("ro.factory.hasGPS", "false") failed
[    3.095047] init: property_set("ro.boot.noril", "true") failed
[    3.095290] init: property_set("ro.rk.screenshot_enable", "true") failed
[    3.095442] init: (Loading properties from /system/build.prop took 0.00s.)
[    3.095514] init: (Loading properties from /vendor/build.prop took 0.00s.)
[    3.095563] init: (Loading properties from /factory/factory.prop took 0.00s.)
[    3.095700] fs_mgr: Warning: unknown flag resize
[    3.095835] init: /recovery not specified in fstab
[    3.095974] init: Starting service 'healthd'...
[    3.096515] init: cannot find '/system/bin/displayd' (No such file or directory), disabling 'displayd'
[    3.096650] init: Starting service 'lmkd'...
[    3.097097] init: Starting service 'servicemanager'...
[    3.097452] init: setsockcreatecon("") failed: Invalid argument
[    3.097786] init: Starting service 'surfaceflinger'...
[    3.098379] init: Starting service 'vold'...
[    3.098441] binder: 198:198 transaction failed 29189/0, size 0-0 line 2868
[    3.099313] init: setsockcreatecon("") failed: Invalid argument
[    3.099404] init: setsockcreatecon("") failed: Invalid argument
[    3.101074] random: surfaceflinger: uninitialized urandom read (40 bytes read, 62 bits of entropy available)
[    3.101080] random: lmkd: uninitialized urandom read (40 bytes read, 62 bits of entropy available)
[    3.103665] random: servicemanager: uninitialized urandom read (40 bytes read, 62 bits of entropy available)
[    3.104011] init: insmod: open("/system/lib/modules/ump.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali_kbase.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/rk30_mirroring.ko") failed: No such file or directoryinit: finit_module for "/system/lib/modules/rk29-ipp.ko" failed: Exec format errorinit: insmod: open("/system/lib/modules/pvrsrvkm.ko") failed: No such file or directoryinit: finit_module for "/drmboot.ko" failed: Exec format errorfs_mgr: Warning: unknown flag resize
[    3.105643] random: vold: uninitialized urandom read (40 bytes read, 62 bits of entropy available)
[    3.107101] zram0: detected capacity change from 0 to 533413888
[    3.111836] random: mkswap: uninitialized urandom read (40 bytes read, 63 bits of entropy available)
[    3.145285] random: mkswap: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
[    3.147553] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS
[    3.150512] init: Starting service 'debuggerd'...
[    3.151451] init: Starting service 'debuggerd64'...
[    3.153200] init: Not bootcharting.
[    3.158658] random: debuggerd64: uninitialized urandom read (40 bytes read, 66 bits of entropy available)
[    3.160941] random: vdc: uninitialized urandom read (40 bytes read, 66 bits of entropy available)
[    3.170723] random: debuggerd: uninitialized urandom read (40 bytes read, 67 bits of entropy available)
[    3.380745] fs_mgr: Warning: unknown flag resize
[    3.381592] ueventd[178]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000006
[    3.381610] pgd = ffffffc0f090a000
[    3.381619] [00000000] *pgd=00000000f090d003, *pud=00000000f090d003, *pmd=0000000000000000
[    3.381640]
[    3.381651] CPU: 4 PID: 178 Comm: ueventd Not tainted 4.4.83 #2
[    3.381660] Hardware name: Firefly-RK3399 Board BOX (Android) (DT)
[    3.381670] task: ffffffc0f0f56800 task.stack: ffffffc0f08e8000
[    3.381681] PC is at 0x4c5580
[    3.381688] LR is at 0x4c3274
[    3.381696] pc : [<00000000004c5580>] lr : [<00000000004c3274>] pstate: 40000000
[    3.381705] sp : 0000007ffd7a8120
[    3.381712] x29: 0000007ffd7a8130 x28: 0000000000533018
[    3.381727] x27: 02fea1d0d680962a x26: 0000000000000000
[    3.381742] x25: 0000000000000000 x24: 0000000000006180
[    3.381756] x23: 0000000000000100 x22: 000000000053a728
[    3.381770] x21: 0000007ffd7a82ed x20: 0000007ffd7a8ac8
[    3.381784] x19: ffffffffffffffff x18: 0000000000000000
[    3.381797] x17: 0000007ffd7a79b0 x16: 000000000050c0e4
[    3.381811] x15: 08030e0000000000 x14: 000000008000002f
[    3.381824] x13: 0000000000000000 x12: 000000000000002c
[    3.381838] x11: 0101010101010101 x10: 0000000000006000
[    3.381851] x9 : 000000000053a728 x8 : 0000000000000011
[    3.381865] x7 : 0000000000000000 x6 : 00000000000c1903
[    3.381879] x5 : 03190c0000000000 x4 : 0000000000000000
[    3.381892] x3 : 0000000000000100 x2 : 0000000000006180
[    3.381906] x1 : 0000000000000000 x0 : 0000000000000000
[    3.381919]
[    4.099839] healthd: BatteryCurrentNowPath not found
[    4.099861] healthd: BatteryCycleCountPath not found
[    4.100354] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    4.100810] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    4.101244] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    4.101681] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    4.618007] fusb302 4-0022: PD disabled
[    5.359576] iep dpi mode inactivity
[    5.752849] I'am in gsl_ts_resume() start
[    8.523021] random: nonblocking pool is initialized


Reply

Use props Report

125

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
125
Posted at 1/10/2026 09:00:24        Only Author  2#
This is a truly magnificent article, thank you for sharing your thoughts. Time to tackle the Exam C_BCBTP_2502 online exam! Fingers crossed!
Reply

Use props Report

130

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
130
Posted at 1/11/2026 01:14:33        Only Author  3#
Testpdf的專家團隊為了滿足以大部分IT人士的需求,他們利用自己的經驗和知識努力地研究過去的幾年的Oracle 1z0-076 認證考試題目,如此,Testpdf的最新的Oracle 1z0-076 的模擬測試題和答案就問世了。 我們的Oracle 1z0-076 模擬測試題及答案和真實考試的題目及答案有95%的相似性,通過Testpdf提供的測試題你可以100%通過考試。如果你沒有通過考試,Testpdf會全額退款給你。你也可以先在網上免費下載Testpdf提供的部分關於Oracle 1z0-076 認證考試的練習題和答案作為嘗試,在你瞭解了我們的可靠性後,快將我們Testpdf提供的產品加入您的購物車吧。Testpdf將成就你的夢想。
Reply

Use props Report

131

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
131
Posted at 1/12/2026 21:45:32        Only Author  4#
I’m so thankful for your article, it was really eye-catching. Best of luck! Here are the Professional-Cloud-Developer valid practice materials resources, free for everyone!
Reply

Use props Report

128

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
128
Posted at 1/17/2026 04:36:25        Only Author  5#
This article is amazing, thank you for sharing it with us! Ready to crush the 300-430 valid test syllabus exam! Hope it goes great!
Reply

Use props Report

133

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
133
Posted at 1/19/2026 20:46:39        Only Author  6#
Your article is fantastic, I really appreciate you sharing it! This Dumps C_BCSBN_2502 download helped me secure a promotion and salary increase. Now it’s free for everyone. Best wishes for your career advancement!
Reply

Use props Report

134

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
134
Posted at 1/23/2026 16:19:29        Only Author  7#
Your article has made a lasting impression, thank you! Wishing you all the best! Here’s the free Test C-BCSSS-2502 pass4sure material.
Reply

Use props Report

125

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
125
Posted at 1/28/2026 10:32:43        Only Author  8#
Your article truly made me think, thank you for the fresh viewpoint. I hope the New study guide C_P2W43_2023 sheet material helps, and it's entirely free.
Reply

Use props Report

131

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
131
Posted at 1/29/2026 05:20:13        Only Author  9#
Your article really caught my attention, thank you for sharing it. Enhance your IT knowledge and get free Reliable exam C_HRHPC_2505 simulator online. Wishing you success!
Reply

Use props Report

131

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
131
Posted at yesterday 13:21        Only Author  10#
Wollen Sie die Fragenkataloge zur Real Estate New-Jersey-Real-Estate-Salesperson Zertifizierungsprüfung haben, die Ihre Zeit und Energie sparen können? Dann wählen Sie ITZert. Unsere Fragenkataloge für Real Estate New-Jersey-Real-Estate-Salesperson Zertifizierungsprüfung werden Ihnen einjähriger Aktualisierung kostenlos bieten, damit Sie die neulich aktualisierten Informationen über Real Estate New-Jersey-Real-Estate-Salesperson Zertifizierungsprüfung erhalten können. Wir versprechen Ihnen, dass wir Ihnen alle Ihre bezahlten Summe zurückgeben werden, wenn Sie die Zertifizierungsprüfung nicht bestehen, nachdem Sie unsere Produkte gekauft haben.
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list