Firefly Open Source Community

Title: use of otg_vbus (otg_det signal) [Print This Page]

Author: bschiett Time: 11/2/2016 19:56
Title: use of otg_vbus (otg_det signal)
Hi all,
I am looking at the schematic of the reload core module and see that there is an otg_det signal. In the schematic of the reload board this is tied via a resistor to VBUS0. However, when I look at the device tree files or driver code for linux I don't find this signal anywhere? How is this signal used?
Thanks
B

otg det.JPG (52.74 KB, Down times: 157)

Author: isle Time: 11/3/2016 10:40
VBUS is the input and output bidirectional pin.
For Device, is a supply power input pin.
For Host ,will supply a 5V power output to the devices.

Author: bschiett Time: 11/4/2016 18:14

isle Posted at 11/3/2016 10:40
VBUS is the input and output bidirectional pin.
For Device, is a supply power input pin.
For Host ...

Thanks, I know that, but what is the role of the OTG_DET signal?

Author: isle Time: 11/7/2016 10:55

the cpu detect this signal to know if there is a host device plugged in.

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)