Firefly Open Source Community

Title: upgrade_tool won't finish flashing images with Firefly RK3288 board [Print This Page]

Author: hunter    Time: 6/16/2018 00:16
Title: upgrade_tool won't finish flashing images with Firefly RK3288 board
Hi All,

New to linux-rockchip,  bought a firefly rk3288 board preloaded with Android, followed the http://opensource.rock-chips.com/ Linux SDK instructions and built everything, but when I was trying to flash images with upgrade_tool (v1.33) like the following, the command never went through and stuck like this:

<code>
sudo ./upgrade_tool ul ./rk3288_loader_v1.06.236.bin
Loading loader...
Support Type: RK320A    Loader ver:2.36 Loader Time: 2018-05-31 13:38:53
Test Device Total(1),Current(1)
</code>

tried another one,

<code>
sudo ./upgrade_tool di -p ./parameter.txt
Write gpt...
</code>

wait a long time but still nothing happens.

On firefly rk3288, I did entered "maskrom rockusb mode" by short "clock" and "ground", and lsusb show "2207:320a" usb id, so that is ok.  Feels like something is broken during the process.

Thanks in advance for any idea about it.

-Hunter




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1