Firefly Open Source Community

Title: UART communication problem [Print This Page]

Author: cuckoo933 Time: 7/11/2022 14:20
Title: UART communication problem
I received ROC-RK3588S-PC SBC today ^^.
I'd like to see booting log by UART but the text was strange to read.
I think there was no problem at terminal settings.
Please teach me what was wrong.

Serial_log.PNG (132.57 KB, Down times: 56)

Author: cuckoo933 Time: 7/11/2022 15:01
Last edited by cuckoo933 In 7/11/2022 16:18 Editor

Maybe my USB to UART cable doesn't support 1.5Mbps baudrate...
If so, how can I change the default baudrate to under 1Mbps ?

Author: cuckoo933 Time: 7/12/2022 09:44
As expected it seems my old cable doesn't support 1.5Mbps baudrate.
I bought new USB to UART module which using FT232RL chipset then it captured well the booting log at 1.5Mbps baudrate.

Author: 799959745 Time: 7/12/2022 11:14
So is your problem solved?

Author: cuckoo933 Time: 7/12/2022 12:07

799959745 Posted at 7/12/2022 11:14
So is your problem solved?

Basically yes.
But I'd like to know that is it possible to change the default baudrate ?
I would also like to know how to do it if possible.

Author: 799959745 Time: 7/12/2022 15:00

cuckoo933 Posted at 7/12/2022 12:07
Basically yes.
But I'd like to know that is it possible to change the default baudrate ?
I would ...

rk3588_sdk/docs/Common/UART/Rockchip_Developer_Guide_UART_EN.pdf

Author: cuckoo933 Time: 7/13/2022 07:43

799959745 Posted at 7/12/2022 15:00
rk3588_sdk/docs/Common/UART/Rockchip_Developer_Guide_UART_EN.pdf

Where can I find the rk3588_sdk.... ?
My SBC has updated from android to the ubuntu image.
And how can I get the ubuntu source code for ROC-RK3588S-PC ?

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)