Ubuntu16.04 for Firefly arrived

zzarr

Hello!

I know it's an beta version, but I flashed the image on my Firefly RK3288 Plus and I got this two issues:

1. The HDMI signal turns off and on randlomly in such a way that the monitor turns off and on for about a second (it does not matter if I have X running or not).
2. I can't get keyboard or mouse to work at all.

Are this know problems?

Best Regards
/ Rasmus

zzarr

Hello!

Yes, here are the logs:

dmesg  http://pastebin.com/sp30EfF1
syslog http://pastebin.com/KYx6Sp8v
(quite long, expires 1 month from now)

kern.log https://dl.dropboxusercontent.com/u/90981951/kern.log
(super long, 2.6MB in size)

There is clearly something wrong with the graphics, I get this line often: "[drm:drm_mode_legacy_fb_format] *ERROR* bad bpp, assuming x8r8g8b8 pixel format", if it has to do with my setup (e.g. the TV I have connected the HDMI to, or anything else I don't know)

I hope anyone can find the problem.

Thanks!

Best Regards
/ Rasmus

zzarr

Hello isle!

lsusb finds the device, this line:
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver

Since it's much smoother with dropbox then pastebin, here's a link to Xorg.0.log.
https://dl.dropboxusercontent.com/u/90981951/Xorg.0.log

But I think that the framebuffer driver is to blame since even if I don't even start the X11 environment it's still turning off and on.

Best Regards
/ Rasmus

zzarr

Hello again!

Hmm, I think I might have used another monitor which it did not find at all.

Sorry about that.

But it should have found it in any way (it's a normal monitor which I know works).

I have turned it off and on.

Should I try to install another system e.g. the official 14.04 and see if it works?

Best Regards
/ Rasmus

zzarr

That's the one I will try with :-)

Does it have Open GL ES?

Or what is the difference?

zzarr

Hello again!

I was gone for a while.

I tested the 14.04 image, but it would not even boot to a commandline.

So I flashed the 16.04 image back.

When is the release of a stable 16.04?

Best Regards
/ Rasmus

zzarr

Hello again!

In that case I wait for the next version since it's a hobby project of mine with no deadline.

Best Regards
/ Rasmus

zzarr

Hi everyone again!

It's been a while since I looked here.

isle how do I set up an environment so that I can build an image like you do?

(I run Ubuntu)

Best Regards
/ Rasmus

zzarr

Hello!

No, I can't read Chinese, there's no English translation?

zzarr

Nice, thanks