Firefly Open Source Community

   Login   |   Register   |
New_Topic

JTAG

2

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
2
Posted at 12/16/2014 13:04:12     
Hello is it possible to connect with standard JTAG to the Firefly RK3288 board? I saw the pins TDO... go to the SD card socket, but would it work if itis removed? We would like to port our RTOS to the board
Reply

Use props Report

5

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
5
Posted at 12/16/2014 14:18:52     
other RTOS?It is so?interesting
Reply

Use props Report

2

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
2
Posted at 12/17/2014 16:24:12     
"ther RTOS?It is so?interesting" doesn't answer my question.
Reply

Use props Report

10

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
10
Posted at 12/17/2014 16:43:34     
You can use the UART or mini USB for debugging.
Reply

Use props Report

2

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
2
Posted at 12/27/2014 17:13:46     
You cannot use UART debugging for baremetal and it is crap compared to JTAG debugging. And it was not my question.
Reply

Use props Report

29

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
29
Posted at 1/17/2023 21:43:28     
I am not sure about it. I only have experience about printing device and if you want to know anything about it then do let me know I will guide you about it properly.
Reply

Use props Report

14

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
14
Posted at 12/20/2023 18:15:50     
The Firefly RK3288 board does not have a standard JTAG interface built-in. However, it is possible to establish a JTAG connection by using an external JTAG adapter or debugger that is compatible with the RK3288 processor.
tunnel rush
Reply

Use props Report

14

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
14
Posted at 5/20/2024 11:29:28     
It seems unclear to me. I only have experience with printing devices, so please let me know if you have any questions; I'll be happy to help.
geometry dash
Mike Jackson expert
Reply

Use props Report

High mode
B Color Image Link Quote Code Smilies |Upload

This forum Credits Rules

Quick Reply Back to top Back to list