JTAG

BS42 · Posted at 12/16/2014 13:04:12

Hello is it possible to connect with standard JTAG to the Firefly RK3288 board? I saw the pins TDO... go to the SD card socket, but would it work if itis removed? We would like to port our RTOS to the board

Sai · Posted at 12/16/2014 14:18:52

other RTOS？It is so?interesting

BS42 · Posted at 12/17/2014 16:24:12

"ther RTOS？It is so?interesting" doesn't answer my question.

Andy · Posted at 12/17/2014 16:43:34

You can use the UART or mini USB for debugging.

BS42 · Posted at 12/27/2014 17:13:46

You cannot use UART debugging for baremetal and it is crap compared to JTAG debugging. And it was not my question.

maxmarrie · Posted at 1/17/2023 21:43:28

I am not sure about it. I only have experience about printing device and if you want to know anything about it then do let me know I will guide you about it properly.

makeshifteggs · Posted at 12/20/2023 18:15:50

The Firefly RK3288 board does not have a standard JTAG interface built-in. However, it is possible to establish a JTAG connection by using an external JTAG adapter or debugger that is compatible with the RK3288 processor.
tunnel rush