Firefly Open Source Community

   Login   |   Register   |
New_Topic
12
New Topic
Print Previous Topic Next Topic

Problem on Gitlab?

90

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
90
Posted at 3/5/2018 17:04:45        Only Author  11#
Not sure what you mean by official firmware.My origin is https://gitlab.com/TeeFirefly/FireNow-Nougat.git That's all there is, isn't it? Are there any prebuilt images of 7.1.2 for rk3399_firefly_box-userdebug available anywhere?

I'm doing a 'Make clean' followed by './FFTools/make.sh -j4 && ./FFTools/mkupdate/mkupdate.sh' again now, just to be sure, but I actually did that before. I also received an AIO board a couple of days ago so I can check if that board shows the same behavior. We are committed to 4K and 60 fps, so any confirmation that anyone got 7.1.2 working with such a screen and cable inserted at boot would be appreciated.
Reply

Use props Report

90

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
90
Posted at 3/19/2018 19:40:30        Only Author  12#
This is still unsolved. I am using the original gitlab 7.1.2, last commit is 6ef1ea24af
I build and flash:
sudo upgrade_tool di -b rockdev/Image-rk3399_firefly_box/boot.img
sudo upgrade_tool di -k rockdev/Image-rk3399_firefly_box/kernel.img
sudo upgrade_tool di -s rockdev/Image-rk3399_firefly_box/system.img
sudo upgrade_tool di -r rockdev/Image-rk3399_firefly_box/recovery.img
sudo upgrade_tool di -m rockdev/Image-rk3399_firefly_box/misc.img
sudo upgrade_tool di resource rockdev/Image-rk3399_firefly_box/resource.img
sudo upgrade_tool di -p rockdev/Image-rk3399_firefly_box/parameter.txt
sudo upgrade_tool ul ./u-boot/rk3399_loader_v1.08.109.bin
sudo upgrade_tool di trust rockdev/Image-rk3399_firefly_box/trust.img

Now the device does not boot unless I pull out the HDMI cable. It crashes in u-boot:
dw_rk_hdmi_register:fail to read deviceinfo
hdmi baseparamer 0x0@0-0
[EDID-EXTEND] It is a  CEA 861 Series Extension.
no baseparametr,find best edid mode,vic=1121
hdmi_dev->video.vic is 4
rk lcdc - 0 dclk set: dclk = 74250000HZ, pll select = 0, div = 1
"Synchronous Abort" handler, esr 0x96000004

/Tony
Reply

Use props Report

792

Credits

10

Prestige

10

Contribution

advanced

Rank: 4

Credits
792
Posted at 3/29/2018 19:53:47        Only Author  13#
mansson Posted at 3/19/2018 19:40
This is still unsolved. I am using the original gitlab 7.1.2, last commit is 6ef1ea24af
I build and ...

Thanks for report.
RK have update a way to solve some HDMI cannot get the edid causing no display.It will merge into the firefly sdk.
Reply

Use props Report

Return to List
12
You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list