Firefly Open Source Community

   Login   |   Register   |
New_Topic

ROC-RK3328-PC alternative way to go to MuskRom

1066

Credits

0

Prestige

0

Contribution

vip

Rank: 6Rank: 6

Credits
1066
Posted at 7/31/2022 18:26:08     
ROC-RK3328-PC does not go into the MaskRom mode according to the official instructions. Is there another way to switch to MaskRom mode, since when testing the bootloader, it was not completely recorded.
Reply

Use props Report

18

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
18
Posted at 8/2/2022 09:37:46     
Last edited by zhangzhenzhao In 8/2/2022 09:38 Editor

According to the wiki operation, you can enter the maskroom mode. When the machine is not powered on, short circuit CLK and GND, and then power on the machine to enter the maskroom. This is the only way to enter the maskroom.
C:\Users\azhan\Desktop\11.png 11.png
Reply

Use props Report

1066

Credits

0

Prestige

0

Contribution

vip

Rank: 6Rank: 6

Credits
1066
Posted at 8/3/2022 01:35:20     
zhangzhenzhao Posted at 8/2/2022 09:37
According to the wiki operation, you can enter the maskroom mode. When the machine is not powered on ...

I know about the wiki (I also gave a link to it), but at the moment, by closing the CLK and GND pins, it is impossible to transfer the board to MaskRom (maybe in previous times I could get to nearby elements when closing), so the question arises how much the CLK pin I'm connected to EMMC and not through nearby lying elements.
donation   slarm64
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list