Firefly Open Source Community

   Login   |   Register   |
New_Topic

[General] Accessing CAM-C1126S2U

30

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
30
Posted at 8/18/2022 22:44:24     
Hello all,
I purchased a CAM-C1126S2U. When I connect the device to my USB port I find the usb ethernet module which is virtualized by RNDIS. I set static ip to that interface as 172.16.110.2 and check it using ifconfig.
When I try to ping the device itself 172.16.110.1 there is no response. Either there is no page shown when the same ip address is entered to the browser.
I am following the wiki page here: https://wiki.t-firefly.com/en/CAM-C11262U/usage.html#adb-debug

How can I access the device?
Reply

Use props Report

54

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
54
Posted at 8/19/2022 14:31:30     
Device IP address: 172.16.110.2 (172.16.110.6)

Host(Your PC) IP address: 172.16.110.1  not 172.167.110.2
Reply

Use props Report

30

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
30
Posted at 8/31/2022 14:01:05     
Hello thanks for the answer.
I was able to ping 172.16.110.6 however when I try to hit web interface with the same IP a blank page is being loaded. Web UI is not showing as mentioned in wiki page that I have shared in beginning post. How can I access to web UI?
Reply

Use props Report

10

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
10
Posted at 11/9/2022 04:43:11     
Last edited by radbis In 11/9/2022 04:47 Editor

Hi, follow below steps:
1. As for FW, I was using latest "CAM_CRV1126_1109S2U_UVCC_GPT_20220113_1518-20221031T231709Z-001" - so check your host (Win or Linux) IP should be 172.16.110.1 and Cam dev kit should have address as 172.16.110.2. Also check that you have "adb" working.
2. Download "ArcFaceGo_RV1109_App.zip" from Resources,
3. Unzip it on your host machine and depending your OS choose .cmd or .sh executable script (your Cam should be connected to your host machine at this moment),
4. Script will create two separate instances in two directories: GO and Server,
5. Follow the instruction from "Reame.docx" (translate it if needed) and initialize both instances in sequence as it is in instruction. Restart may be needed - I don't remember exactly
6. Type in browser 172.16.110.6 and you should see Welcome screen and request for setting new access credentials - in chinese
7. To start working with this app you need to authorize it by exporting ID file choosing from menu and sending to authors, they will send you back license key to import into app. I was too lazy and didn't pass this step
8. The End - Enjoy
Reply

Use props Report

36

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
36
Posted at 11/15/2022 14:48:03     
I have follow the instruction and setup the camera as AI_UVC, it's working good when connected to Windows 10. But when I connect the camera to Android 11 Box using USB 3.0 port, it is not working, and it is display an error message as attached file. Please help me with this.
z3882472403795_bb18317ca50153d631d5aff60c82c35c.jpg
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list