Firefly-RK3288 Slackware Arm

mara · Posted at 1/18/2017 03:55:13

testing kernel 4.4.41 dmesg

work:
hw video decode/encode (vdpau)
wifi

mara · Posted at 2/23/2017 04:54:33

Last edited by mara In 2/23/2017 05:15 Editor

update kernel 4.4.50 dmesg
work:
hw video decode/encode (vdpau)
wifi / GB ethernet

add turbo-mode 126 MHz - 2.21 GHz

mara · Posted at 8/22/2017 02:12:06

0. images from sdcard
1. update kernel 4.4.77
2. flash uboot to mmc:  ./rkdeveloptool db rk3288_ubootloader_v1.01.06.bin
                                 ./rkdeveloptool wl 0x40 idbloader.img
                                 ./rkdeveloptool wl 0x4000 uboot.img
3. after flash uboot transfer sd -> mmc, run setup after booting

mara · Posted at 3/9/2018 04:29:28

Last edited by mara In 3/9/2018 04:31 Editor

SDcard release

1. update kernel 4.4.119
2. update miniroot_06Mar18

slack-current-arm-miniroot_06Mar18-4.4.119-firefly_rk3288-build-20180308.img.7z
slack-current-arm-xfce_06Mar18-4.4.119-firefly_rk3288-build-20180308.img.7z

leung先森 · Posted at 3/16/2018 10:13:35

mara Posted at 3/9/2018 04:29
SDcard release

1. update kernel 4.4.119

great
Looking forward to your continuous update

psycmos · Posted at 5/28/2018 03:09:19

Somebody can do one small tutorial for install it?

I did rkdeveloptool db rk3288_ubootloader_v1.01.06.bin.
It flash OK but i reconnect board MASKROM and says bootloader 2.3.

I really wahnt to test it.
Best regards, Nuno

mara · Posted at 6/2/2018 03:00:41

Last edited by mara In 6/2/2018 04:31 Editor

psycmos Posted at 5/28/2018 03:09
Somebody can do one small tutorial for install it?

flash to mmc:
rkdeveloptool db rk3288_ubootloader_v1.01.06.bin
rkdeveloptool wl 0x40 idbloader.img
rkdeveloptool wl 0x8000 slack-current-arm-miniroot_22May18-4.4.126-firefly_rk3288-build-20180522.img
rkdeveloptool rd

flash to sdcard:
dd if=slack-current-arm-miniroot_22May18-4.4.126-firefly_rk3288-build-20180522.img of=/dev/mmcblk0 bs=10M

mara · Posted at 6/5/2018 03:50:05

new images are available and the instruction is corrected
http://fail.pp.ua/board/2
slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz
slack-current-arm-xfce_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz

mara · Posted at 2/11/2019 03:43:15

Last edited by mara In 2/11/2019 03:47 Editor

sdcard release
README.TXT
update kernel 4.19.20
slack-current-arm-miniroot_04Jan19-4.19.20-firefly_rk3288-build-20190210.img.xz
slack-current-arm-miniroot_04Jan19-4.19.20-firefly_rk3288-build-20190210.img.xz.md5

installation on a sdcard
Unpack the IMAGE file and record by running the following on the SD card
( /dev/mmcblk0 = your sd card device ):
dd if=slack-current-*-miniroot_*-build-*.img of=/dev/mmcblk0 bs=1M
or
xzcat slack-current-*-miniroot_*-build-*.img.xz > /dev/mmcblk0

mara · Posted at 9/29/2019 05:32:30

update kernel 5.2.11

Firefly-RK3288 Slackware Arm

Reviews

Reviews