Firefly-RK3288 Slackware Arm

mara

hi mac-l1,

using armsoc I have just a small indication ~5-9 FPS
using fbdev readings ~ 30-50 FPS

mara

finished assembly automation build and transfer systems eMMC
installation is divided into 4 stages:
1. The images are flash on SD card

1. ./flash_sd.sh

Copy the code

2. downloadable in SD card
3. Transfer to eMMC after completing boot

1. setup

Copy the code

4. flash eMMC

1. tools/upgrade_tool ul $(ls | grep RK3288UbootLoader) || exit 1
   
2. tools/rkflashtool P < parameters.txt || exit 1
   
3. tools/rkflashtool w kernel < kernel.img || exit 1
   
4. tools/rkflashtool w boot < boot.img || exit 1

Copy the code

http://dl.fail.pp.ua/slackware/firefly-rk3288-next/

mara

AussieJohn Posted at 4/30/2016 21:13
I've noticed that the graphics in this build don't work well, all the gui is very jerky compared to  ...

rename file /etc/X11/xorg.conf as xorg.conf.old
and restart X server: init 3 ; init 4

mara

for test: glmark2-20160430_git-arm-1mara.txz

mara

test glmark2 [   574.822] (II) FBDEV: driver for framebuffer: fbdev
http://p.fail.pp.ua/Wo5SWr6Y
very bad performance
using armsoc performance worse

mara

hi mac-l1,

yes I have enabled library Mesa, but the results will not differ think.
later again to do the test.

mara

for unbrick to fleshing the official firmware and bootloader
this firmware is working properly with the sd card to record eMMC after loading has migration script on eMMC
bootloader can not fleshing on eMMC
ideas for these two boards are not very different and must be loaded on both

mara

hi mac-l1

bad news,
in slackware You can not use the binary driver, the reason is that they are collected as a hard float. slackware collected as a soft float, for drivers need to add multilib packages

mara

Slackware ARM -current and onwards is now a hard float OS!
add support legacy kernel 3.14
info:
http://fail.pp.ua/board/2

mara

dmesg
glmark2