AIO3568J Error to compile Linux Firmware

ivan237

I use a AIO3568J and i install Ubutnu 18.04 on it.I use this link "https://wiki.t-firefly.com/en/Core-3568J/linux_compile.html" to compile the linux firmware.
1- I upgrade and install git, repo and python successfully.

2- I download the full SDK via the command below "repo init --no-clone-bundle --repo-url https://gitlab.com/firefly-linux/git-repo.git -u https://gitlab.com/firefly-linux/manifests.git -b master -m rk356x_linux_release.xml" and the terminal asks me to configure my email and my username and i do it. The SDK is downloaded succesfully i tkink.


3- I synchronize the code with the commands below ".repo/repo/repo sync -c --no-tags". I think the synchronization was not done well because i had errors like this "curl : the requested url returned error 403". I do not know why i have this and some files are not completely dowloaded(For example 82/356).


4- For Building the board i use the command "./build.sh aio-3568j-ubuntu.mk" and i select the number 0 but the file .BoardConfig.mk doesn't contain this text :

"
# Target archexport RK_ARCH=arm64 # 64-bit ARM# Uboot defconfigexport RK_UBOOT_DEFCONFIG=firefly_rk3568 # u-boot configuration# Kernel defconfigexport RK_KERNEL_DEFCONFIG=firefly_linux_defconfig # kernel configuration# Kernel dtsexport RK_KERNEL_DTS=firefly-rk3568-aioj # dts file# parameter for GPT tableexport RK_PARAMETER=parameter-ubuntu-fit.txt # partition table# rootfs image pathexport RK_ROOTFS_IMG=ubuntu_rootfs/rk356x_ubuntu_rootfs.img # filesystem path
"

5- Finally i cannot compile with "./build.sh" and I need help for solve the problem.


Thank you

ivan237

And I want to set WIFI 6 on this board. Can you help me ?

ivan237

Liuth Posted at 3/7/2023 09:46
The SDK is for cross-compile, which means SDK is used on x86_64 PC, not on arm64 boards.
So please  ...

Ok but how I will do the link between my personnal computer and the AIO3568J Board? And the synchronization will be done on what ? (Personnal Computer or AIO3568J Board). The command "./build.sh aio-3568j-ubuntu.mk and ./build.sh" will be done on what ? (Personnal Computer or AIO3568J Board)

I think it's necessary to mention this details in the wiki please.
Sincerely,

ivan237

Liuth Posted at 3/7/2023 15:51
Do all steps on PC
After building you will get a firmware, then follow this wiki to burn the firm ...

The instructions you sent to me just allow me to download Ubuntu 18.04 via the cable. I already do it by the SD CARD.

I want to know the steps to follow after i install Ubuntu 18.04 on my AIO3568J Board.

ivan237

Liuth Posted at 3/7/2023 15:51
Do all steps on PC
After building you will get a firmware, then follow this wiki to burn the firm ...

I want help step by step on all the instructions on downloading the SDK