Firefly Open Source Community

   Login   |   Register   |

sdhci-arasan fe330000.sdhci: data error (-84)

84

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
84
Posted at 4/22/2017 01:15:44     
hi my friends ,my mini pc not work .all detail about this is written below .plz

1.696309] sdhci-arasan fe330000.sdhci: data error (-84)
[    1.696362] sdhci-arasan fe330000.sdhci: failed (-84) to handle RPMB request
Reply

Use props Report

1821

Credits

10

Prestige

17

Contribution

super moderator

Rank: 8Rank: 8

Credits
1821
Posted at 4/24/2017 15:53:26     
what is your miniPC ,is a rk3399 board made by yourself?
Reply

Use props Report

668

Credits

0

Prestige

0

Contribution

advanced

Rank: 4

Credits
668
Posted at 4/24/2017 17:40:14     
It look like something wrong with eMMC .
You can try the new Firmware. Or wait the SDK update,  
I heard this week will update 3399 source code .
Reply

Use props Report

43

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
43
Posted at 8/26/2017 06:42:07     
I received my rk3399 board few days ago an I got same problem, I tried Android and flint_os. On flint_os I got kernel panic, on Ubuntu it's stuck on this:

[    1.665824] sdhci-arasan fe330000.sdhci: data error (-84)
[    1.666364] sdhci-arasan fe330000.sdhci: failed (-84) to handle RPMB request
u?   1.675940]
[    1.730858] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    1.752497] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 317
[    1.760954] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.761539] mmc2: new ultra high speed SDR104 SDIO card at address 0001

any help?
Reply

Use props Report

43

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
43
Posted at 8/26/2017 07:10:00     
And this is the output loading flint:

[    1.635925] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[    1.639277] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[    1.640196] mmcblk1: error -84 transferring data, sector 2602120, nr 32, cmd response 0x900, card status 0x0
[    1.641097] mmcblk1: retrying using single block read
[    1.651438] mmcblk1: error -84 transferring data, sector 2602147, nr 5, cmd response 0x900, card status 0x0
[    1.652317] blk_update_request: I/O error, dev mmcblk1, sector 2602147
[    1.655667] mmcblk1: error -84 transferring data, sector 2602148, nr 4, cmd response 0x900, card status 0x0
[    1.656658] blk_update_request: I/O error, dev mmcblk1, sector 2602148
[    1.660219] mmcblk1: error -84 transferring data, sector 2602150, nr 2, cmd response 0x900, card status 0x0
[    1.661148] blk_update_request: I/O error, dev mmcblk1, sector 2602150
[    1.666383] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[    1.669373] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[    1.670283] mmcblk1: error -84 transferring data, sector 1188736, nr 144, cmd response 0x900, card status 0x0
[    1.671246] mmcblk1: retrying using single block read
[    1.691750] mmcblk1: error -84 transferring data, sector 1188789, nr 91, cmd response 0x900, card status 0x0
[    1.692698] blk_update_request: I/O error, dev mmcblk1, sector 1188789
[    1.714908] mmc_host mmc2: Bus speed (slot 0) = 200000000Hz (slot req 208000000Hz, actual 200000000HZ div = 0)
[    1.723999] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[    1.726966] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[    1.727876] mmcblk1: error -84 transferring data, sector 3290496, nr 32, cmd response 0x900, card status 0x0
[    1.728797] mmcblk1: retrying using single block read
[    1.732799] mmcblk1: error -84 transferring data, sector 3290498, nr 30, cmd response 0x900, card status 0x0
[    1.733768] blk_update_request: I/O error, dev mmcblk1, sector 3290498
[    1.737489] mmcblk1: error -84 transferring data, sector 3290501, nr 27, cmd response 0x900, card status 0x0
[    1.738480] blk_update_request: I/O error, dev mmcblk1, sector 3290501
[    1.741644] mmcblk1: error -84 transferring data, sector 3290502, nr 26, cmd response 0x900, card status 0x0
[    1.742590] blk_update_request: I/O error, dev mmcblk1, sector 3290502
[    1.745837] mmcblk1: error -84 transferring data, sector 3290503, nr 25, cmd response 0x900, card status 0x0
[    1.746782] blk_update_request: I/O error, dev mmcblk1, sector 3290503
[    1.750049] mmcblk1: error -84 transferring data, sector 3290504, nr 24, cmd response 0x900, card status 0x0
[    1.751002] blk_update_request: I/O error, dev mmcblk1, sector 3290504
[    1.759651] mmcblk1: error -84 transferring data, sector 3290519, nr 9, cmd response 0x900, card status 0x0
[    1.760588] blk_update_request: I/O error, dev mmcblk1, sector 3290519
[    1.763510] mmcblk1: error -84 transferring data, sector 3290520, nr 8, cmd response 0x900, card status 0x0
[    1.766667] mmcblk1: error -84 transferring data, sector 3290521, nr 7, cmd response 0x900, card status 0x0
[    1.771241] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[    1.774126] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[    1.774997] mmcblk1: error -84 transferring data, sector 3290496, nr 8, cmd response 0x900, card status 0x0
[    1.775869] mmcblk1: retrying using single block read
[    1.781227] mmcblk1: error -84 transferring data, sector 3290501, nr 3, cmd response 0x900, card status 0x0
[    1.784817] mmcblk1: error -84 transferring data, sector 3290503, nr 1, cmd response 0x900, card status 0x0
[    1.785930] Kernel panic - not syncing: Requested init /sbin/init failed (error -5).
[    1.786618] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.52 #21
[    1.787147] Hardware name: Rockchip RK3399 Firefly Board (Linux Opensource) (DT)


after that there is a long call trace
Reply

Use props Report

2Wan

Credits

0

Prestige

0

Contribution

hardcore

Rank: 8Rank: 8

Credits
20097
Posted at 5/16/2018 18:08:49     
nadsat Posted at 8/26/2017 07:10
And this is the output loading flint:

[    1.635925] mmc1: Got data interrupt 0x00000002 even tho ...

Hello , I have met the same problem with you.
Have you solved it out ?
Thank you.
Reply

Use props Report

2Wan

Credits

0

Prestige

0

Contribution

hardcore

Rank: 8Rank: 8

Credits
20097
Posted at 5/16/2018 20:12:50     
I have solved this problem by decrease eMMC clk frequence from 200MHz to 150MHz.
maybe  there are some problems  about eMMC signal  on Hardware designing.
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list