Arch Linux ARM

phkr

Arch linux can be booted with kernels 5.3 and 5.4. For SD boot you need to create usual rootfs, but you need to change firefly dtb before you can boot: this patch allows you not to stuck at boot, also you will need to set

1. status="okay"

Copy the code

in hdmi_sound node if you want to have sound. Finally, to make boot process faster than 2 minutes, see Manjaro kernel patch for rk3399
If you want to see boot log via serial console, add following to your kernel command line:

1. console=ttyS2,1500000n8 earlycon=uart8250,mmio32,0xff1a0000

Copy the code

(there is no ttyFIQ0 in mainline kernel)

phkr

penguin Posted at 12/12/2019 12:50
Hi @phkr, where's the Manjaro kernel patch for rk3399,  could you give a pointer?

Here it is